RESUMO
Nanotube and nanowire transistors hold great promises for future electronic and optoelectronic devices owing to their downscaling possibilities. In this work, a single multi-walled tungsten disulfide (WS2) nanotube is utilized as the channel of a back-gated field-effect transistor. The device exhibits a p-type behavior in ambient conditions, with a hole mobility µp ≈ â 1.4â cm2V-1s-1 and a subthreshold swing SS ≈ 10â Vâ dec-1. Current-voltage characterization at different temperatures reveals that the device presents two slightly different asymmetric Schottky barriers at drain and source contacts. Self-powered photoconduction driven by the photovoltaic effect is demonstrated, and a photoresponsivity R ≈ 10â mAW-1 at 2 V drain bias and room temperature. Moreover, the transistor is tested for data storage applications. A two-state memory is reported, where positive and negative gate pulses drive the switching between two different current states, separated by a window of 130%. Finally, gate and light pulses are combined to demonstrate an optoelectronic memory with four well-separated states. The results herein presented are promising for data storage, Boolean logic, and neural network applications.
RESUMO
This work reports on quantum dots (QDs) in perovskite photodetectors showing high optoelectronic performance via quantum-dot-assisted charge transmission. The self-powered broad-band photodetector constructed with SnS QDs in FAPb0.5Sn0.5I3 perovskite can capture incoming optical signals directly at zero bias. The QDs-in-perovskite photodetector exhibits a high sensitivity in the wavelength range from 300 to 1000 nm. Its responsivity at 850 nm reaches 521.7 mA W-1, and a high specific detectivity of 2.57 × 1012 jones can be achieved, which is well beyond the level of previous self-powered broad-band photodetectors. The capability of quantum-dot-in-perovskite photodetectors as data receivers has been further demonstrated in a visible-light communication application.
RESUMO
The demand for self-powered photodetectors (PDs) capable of NIR detection without external power is growing with the advancement of NIR technologies such as LIDAR and object recognition. Lead sulfide quantum dot-based photodetectors (PbS QPDs) excel in NIR detection; however, their self-powered operation is hindered by carrier traps induced by surface defects and unfavorable band alignment in the zinc oxide nanoparticle (ZnO NP) electron-transport layer (ETL). In this study, an effective azide-ion (N3 - ) treatment is introduced on a ZnO NP ETL to reduce the number of traps and improve the band alignment in a PbS QPD. The ZnO NP ETL treated with azide ions exhibited notable improvements in carrier lifetime and mobility as well as an enhanced internal electric field within the thin-film heterojunction of the ZnO NPs and PbS QDs. The azide-ion-treated PbS QPD demonstrated a increase in short-circuit current density upon NIR illumination, marking a responsivity of 0.45 A W-1 , specific detectivity of 4 × 1011 Jones at 950 nm, response time of 8.2 µs, and linear dynamic range of 112 dB.
RESUMO
Biofuel cells (BFCs) based on anodic oxidation and cathodic oxygen reduction represent an attractive alternative to self-powered devices. A glucose/oxygen BFC is described for monitoring glucose. It is making use of a piece of paper carrying a glucose oxidase (GOx) based bioanode, and a bilirubin oxidase (BilOx) based biocathode. The performance of the BFC is affected by the generation of H2O2, a byproduct of enzymatic glucose oxidation. Therefore, the removal of H2O2 is a crucial step in terms of BFC performance and stability. In addition, direct, unambiguous visual read-out is an ideal way to provide quantitative information. The colorimetric readout system described here is based on the consumption of undesired H2O2 and to convert the extent of energy generation into recognizable variations in color. As the H2O2 travels along the hydrophilic channel by capillary action, the formation of red gold nanoparticles from AuCl4- leads to the appearance of a red bar that provides distance-based information that can be read visually. The multiply readable information (maximum power density of BFC or visible distance) provides further choices for quantification. It also enhances reliability. The self-powered system based on the BFC exhibits excellent performance. Glucose can be determined by this method in the 1 to 50 mM concentration range. Graphical abstract Schematic presentation of a paper-supported biofuel cell equipped with a visual distance readout to display the level of energy generation in biofuel cells, and its application in sensing of glucose.
Assuntos
Fontes de Energia Bioelétrica , Técnicas Biossensoriais/instrumentação , Glicemia/análise , Papel , Colorimetria , Eletroquímica , Estudos de Viabilidade , Glucose Oxidase/metabolismo , Humanos , Oxirredutases atuantes sobre Doadores de Grupo CH-CH/metabolismo , Dispositivos Eletrônicos VestíveisRESUMO
Improvement of energy harvesting performance from flexible thin film-based energy harvesters is essential to accomplish future self-powered electronics and sensor systems. In particular, the integration of harvesting signals should be established as a single device configuration without complicated device connections or expensive methodologies. In this research, we study the dual-film structures of the flexible PZT film energy harvester experimentally and theoretically to propose an effective principle for integrating energy harvesting signals. Laser lift-off (LLO) processes are used for fabrication because this is known as the most efficient technology for flexible high-performance energy harvesters. We develop two different device structures using the multistep LLO: a stacked structure and a double-faced (bimorph) structure. Although both structures are well demonstrated without serious material degradation, the stacked structure is not efficient for energy harvesting due to the ineffectively applied strain to the piezoelectric film in bending. This phenomenon stems from differences in position of mechanical neutral planes, which is investigated by finite element analysis and calculation. Finally, effectively integrated performance is achieved by a bimorph dual-film-structured flexible energy harvester. Our study will foster the development of various structures in flexible energy harvesters towards self-powered sensor applications with high efficiency.
RESUMO
Accurate measurements of global solar radiation, atmospheric temperature and relative humidity, as well as the availability of the predictions of their evolution over time, are important for different areas of applications, such as agriculture, renewable energy and energy management, or thermal comfort in buildings. For this reason, an intelligent, light-weight, self-powered and portable sensor was developed, using a nearest-neighbors (NEN) algorithm and artificial neural network (ANN) models as the time-series predictor mechanisms. The hardware and software design of the implemented prototype are described, as well as the forecasting performance related to the three atmospheric variables, using both approaches, over a prediction horizon of 48-steps-ahead.
RESUMO
Due to the wide range of potential applications for next-generation multi-functional devices, the flexible self-powered photodetector (PD) with polarity-switchable behavior is essential but very challenging to be realized. Herein, a wearable bidirectional self-powered PD based on detached (Al,Ga)N and (In,Ga)N nanowires has been proposed and demonstrated successfully. Arising from the photovoltage-competing dynamics across (Al,Ga)N and (In,Ga)N nanowire photoelectrodes, such PD can generate the positive (33.3 mA W -1) and negative (-0.019 mA W -1) photo-responsivity under ultraviolet (UV) and visible illumination, respectively, leading to the bidirectional photocurrent behavior. Thanks to the introduction of quasi solid-state hydrogel, the PD can work without the liquid-electrolyte, thus remarkably reducing the volume from about 482 cm3 to only 0.18 cm3. Furthermore, the use of hydrogel is found to enhance response speed in the UV range by reducing the response time for more than 95%, which is mainly attributed to the increased open circuit potential and reduced ion transport distance. As the GaN connecting segment is pretty thin, the piezoelectric charges generated by stress are proposed to have only a limited effect on the photocurrent density. Therefore, both the stable on-off switching characteristics and photocurrent densities can still be achieved after being bent 400 times. With an excellent flexibility, this work creates opportunities for technological applications of bidirectional photocurrent PDs in flexible optoelectronic devices, e.g., wearable intelligent sensors.
RESUMO
A bio-hydrogel is prepared via a low-cost and time-saving strategy and is studied as a self-powered wound dressing for precision medicine and health monitoring. Promoted by a dual self-catalytic pair composed of Fe3+ and catechol, gelation time is dramatically accelerated to 15 s and the hydrogel can be freely modeled at -18 °C without losing flexibility. As smart wound dressing, the required properties such as self-healing, self-adhesion, antibacterial, and sensing stability, are integrated into one hydrogel. TA@CNC offers abundant hydrogen bond and metal-ligand coordination which facilitate the hydrogel with a self-healing efficiency of 91.6%. Owing to the catechol in TA@CNC, hydrogel can adhere to multiple substrates including skin, and show good antibacterial activity. Inspired by a fruit battery, a self-powered wound dressing is fabricated, which exhibits excellent correlation and efficiency in real-time monitoring of body activity and drug release. In vivo experiments prove that efficient drug release of hydrogel dressing significantly accelerate wound healing. Additionally, the dressing exhibits excellent biocompatibility and has no negative impacts on organs. Herein, a smart wound dressing that is different from the traditional way is proposed. As a self-powered device, it can be integrated with wireless devices and is expected to participate in promising applications.
RESUMO
Multi-functional actuation systems involve the mechanical integration of multiple actuation and sensor devices with external energy sources. The intricate combination makes it difficult to meet the requirements of lightweight. Hence, polypyrrole@graphene-bacterial cellulose (PPy@G-BC) films are proposed to construct multi-responsive and bilayer actuators integrated with multi-mode self-powered sensing function. The PPy@G-BC film not only exhibits good photo-thermoelectric (PTE) properties but also possesses good hydrophilicity and high Young's modulus. Thus, the PPy@G-BC films are used as active layers in multi-responsive bilayer actuators integrated with self-powered sensing functions. Here, two types of multi-functional actuators integrated with self-powered sensing functions is designed. One is a light-driven actuator that realizes the self-powered temperature sensing function through the PTE effect. Assisted by a machine learning algorithm, the self-powered bionic hand can realize intelligent gesture recognition with an accuracy rate of 96.8%. The other is humidity-driven actuators integrated a zinc-air battery, which can realize self-powered humidity sensing. Based on the above advantages, these two multi-functional actuators are ingeniously integrated into a single device, which can simultaneously perform self-powered temperature/humidity sensing while grasping objects. The highly integrated design enables the efficient utilization of environmental energy sources and complementary synergistic monitoring of multiple physical properties without increasing system complexity.
RESUMO
Wearable sensors have drawn vast interest for their convenience to be worn on body to monitor and track body movements or exercise activities in real time. However, wearable electronics rely on powering systems to function. Herein, a self-powered, porous, flexible, hydrophobic and breathable nanofibrous membrane based on electrospun polyvinylidene fluoride (PVDF) nanofiber has been developed as a tactile sensor with low-cost and simple fabrication for human body motion detection and recognition. Specifically, effects of multi-walled carbon nanotubes (CNT) and barium titanate (BTO) as additives to the fiber morphology as well as mechanical and dielectric properties of the piezoelectric nanofiber membrane were investigated. The fabricated BTO@PVDF piezoelectric nanogenerator (PENG) exhibits the high ß-phase content and best overall electrical performances, thus selected for the flexible sensing device assembly. Meanwhile, the nanofibrous membrane demonstrated robust tactile sensing performance that the device exhibits durability over 12,000 loading test cycles, holds a fast response time of 82.7 ms, responds to a wide pressure range of 0-5 bar and shows a high relative sensitivity, especially in the small force range of 11.6 V/bar upon pressure applied perpendicular to the surface. Furthermore, when attached on human body, its unique fibrous and flexible structure offers the tactile sensor to present as a health care monitor in a self-powered manner by translating motions of different movements to electrical signals with various patterns or sequences. Supplementary Information: The online version contains supplementary material available at 10.1007/s42765-023-00282-8.
RESUMO
Small-scale and high-performance energy storage devices have drawn tremendous attention with their portable, lightweight, and multi-functionalized features. Here, we present a foldable supercapacitor with affordable flexibility by adopting a developed design and electrode material system as a way to extend usability. Notably, to resolve the limited energy density of conventional capacitors, we successfully synthesize the CoO/NiCo-layered double hydroxide (LDH) core-shell nanostructure on Ni framework as a cathode material. Further, glucose-based activated carbon (GBAC) is utilized for the anode. The CoO/NiCo-LDH electrodes exhibited a high specific capacitance of â¼284.8 mAh g-1 at 1 A g-1, and GBAC delivers a high specific capacitance of â¼166 F g-1 at 1 A g-1. In the following, the combinatorial integration of these materials enabled the asymmetric supercapacitor (ASC) to increase the energy density by enhancing the capacitance and the voltage window, in which a hydrogel-based electrolyte was facilitated for the foldable and wearable capability. The energy density of the ASC device was â¼24.9 Wh kg-1 at a power density of â¼779.5 W kg-1 with a voltage window of â¼1.6 V. As demonstrated, a self-powered energy source was demonstrated by a serially connected multi-ASC device with a help of a commercial solar cell, which was employed for powering wearable healthcare monitoring devices, including personal alarms for patients and recording the human body's electrical signals. The present work offers a viable approach to preparing potential candidates for high-performance electrodes of supercapacitors with deformable configurations to extend the powering capability of other electronic devices with physical functionalities used in wearable electronics.
Assuntos
Carvão Vegetal , Dispositivos Eletrônicos Vestíveis , Humanos , Capacitância Elétrica , Eletricidade , Eletrodos , GlucoseRESUMO
Viruses and bacteria, which can rapidly spread through droplets and saliva, can have serious effects on people's health. Viral activity is traditionally inhibited using chemical substances, such as alcohol or bleach, or physical methods, such as thermal energy or ultraviolet-light irradiation. However, such methods cannot be used in many applications because they have certain disadvantages, such as causing eye or skin injuries. Therefore, in the present study, the electrical stimulation method is used to stimulate a virus, namely, coronavirus 229E, and two types of bacteria, namely, Escherichia coli and Staphylococcus aureus, to efficiently reduce their infectivity of healthy cells (such as the Vero E6 cell in a viral activity-inhibition experiment). The infectivity effects of the aforementioned virus and bacteria were examined under varying values of different electrical stimulation parameters, such as the stimulation current, frequency, and total stimulation time. The experimental results indicate that the activity of coronavirus 229E is considerably inhibited through direct-current pulse stimulation with a current of 25 mA and a frequency of 2 or 20 Hz. In addition, E. coli activity was reduced by nearly 80% in 10 s through alternating-current pulse stimulation with a current of 50 mA and a frequency of 25 Hz. Moreover, a self-powered electrical stimulation device was constructed in this study. This device consists of a solar panel and battery to generate small currents with variable frequencies, which has advantages of self-powered and variable frequencies, and the device can be utilized on desks, chairs, or elevator buttons for the inhibition of viral and bacterial activities.
RESUMO
Triboelectric nanogenerators (TENGs) were initially invented as an innovative energy-harvesting technology for scavenging mechanical energy from our bodies or the ambient environment. Through adaptive customization design, TENGs have also become a promising player in the self-powered wearable medical market for improving physical fitness and sustaining a healthy lifestyle. In addition to simultaneously harvesting our body's mechanical energy and actively detecting our physiological parameters and metabolic status, TENGs can also provide personalized medical treatment solutions in a self-powered modality. This review aims to cover the recent advances in TENG-based electronics in clinical applications, beginning from the basic working principles of TENGs and their general operation modes, continuing to the harvesting of bioenergy from the human body, and arriving at their adaptive design toward applications in chronic disease diagnosis and long-term clinical treatment. Considering the highly personalized usage scenarios, special attention is paid to customized modules that are based on TENGs and support complex medical treatments, where sustainability, biodegradability, compliance, and bio-friendliness may be critical for the operation of clinical systems. While this review provides a comprehensive understanding of TENG-based clinical devices that aims to reach a high level of technological readiness, the challenges and shortcomings of TENG-based clinical devices are also highlighted, with the expectation of providing a useful reference for the further development of such customized healthcare systems and the transfer of their technical capabilities into real-life patient care.
Assuntos
Eletrônica , Projetos de Pesquisa , Humanos , TecnologiaRESUMO
The unique optoelectronic properties of layered van der Waals (vdW) heterostructures open up exciting opportunities for high-performance photodetectors. Self-driven photodetectors are desirable for reducing power consumption and minimizing the device size. Here, a semiconductor-insulator-semiconductor-type multistacking WSe2/graphene/h-BN/MoS2 vdW heterostructure is demonstrated to realize an enhanced self-powered photodetector with a high on-off current ratio of about 1.2 × 105 and a high photoresponsivity of 3.6 A/W without applying bias, which is the highest photoresponsivity ever reported for self-powered photodetectors. Because of the difference in the Fermi level, a built-in electrical field is formed at the WSe2/graphene junction, where the photoexcited electrons and holes can be efficiently separated and the carriers can easily tunnel through the MoS2/h-BN junction driven by the enhanced potential. Therefore, the enhanced self-powered photodetection is attributable to highly efficient carrier tunneling through large h-BN electron barriers. By comparison, when the stacking sequence is changed to make WSe2/MoS2 p-n heterojunctions lay on graphene/h-BN, the self-powered photocurrent is still generated because of the type-II band alignment, which exhibits lower but still relevant values with a light on/off ratio of â¼8 × 103 and a photoresponsivity of â¼2.39 A/W. The efficient enhancement demonstrates that multistacking heterostructures significantly elevate the performance of self-powered photodetectors, providing a feasible route to develop high-performance self-powered optoelectronic devices and extend their applications in integrated optoelectronic systems.
RESUMO
Ionic conductive hydrogel with multifunctional properties have shown promising application potential in various fields, including electronic skin, wearable devices and sensors. Herein, a highly stretchable (up to 2800% strain), tough, adhesive ionic conductive hydrogel are prepared using cationic nanocellulose (CCNC) to disperse/stabilize graphitic carbon nitride (g-C3N4), forming CCNC-g-C3N4 complexes and in situ radical polymerization process. The ionic interactions between CNCC and g-C3N4 acted as sacrificial bonds enabled highly stretchability of the hydrogel. The hydrogel showed high sensitivity (gauge factor≈5.6, 0-1.6% strain), enabling the detection of human body motion, speech and exhalation. Furthermore, the hydrogel based self-powered device can charge 2.2 µF capacitor up to 15 V from human motion. This multifunctional hydrogel presents potential applications in self-powered wearable electronics.
Assuntos
Fontes de Energia Bioelétrica , Celulose/química , Hidrogéis/química , Nanocompostos/química , Dispositivos Eletrônicos Vestíveis , Resinas Acrílicas/química , Adesivos/química , Módulo de Elasticidade , Condutividade Elétrica , Grafite/química , Humanos , Compostos de Nitrogênio/química , Estresse Mecânico , Resistência à TraçãoRESUMO
Self-powered elastic Conductors based on thermoelectric materials with the ability to harvest energy from the living environment are considered as important for electronic devices under off-grid, maintenance-free, or unfeasible battery replacement circumstances. Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is perhaps the most well-known organic conductor. However, the application of PEDOT:PSS in flexible devices is limited by its brittleness and various unrecoverable properties under strain. Various polymer blends based on water-soluble polymers and PEDOT:PSS have been prepared. Nevertheless, they fail to illustrate good balance between electrical conductivity and mechanical performance due to various issues, including the phase morphology with PEDOT:PSS as the dispersed phase; thus, the formation of a conductive network between PEDOT:PSS is prohibited. In this study, PEDOT:PSS is incorporated into natural rubber (NR), with NR as the dispersed phase. For 10 wt % PEDOT:PSS-NR composite films doped with dimethyl sulfoxide (DMSO), the conductivity was up to 87 S/cm and the elongation at break was maintained at 490%. More importantly, self-powered temperature- and tensile strain-sensing abilities were also realized. Furthermore, it is also demonstrated that most of the unrecoverable strain and conductivity under cyclic tensile strain could be healed by water and phosphate-buffered saline (PBS) post-treatment. This work provides interesting insights for preparing healed and stretchable self-powered electronic sensors.
RESUMO
The accelerated evolution of communication platforms including Internet of Things (IoT) and the fifth generation (5G) wireless communication network makes it possible to build intelligent gas sensor networks for real-time monitoring chemical safety and personal health. However, this application scenario requires a challenging combination of characteristics of gas sensors including small formfactor, low cost, ultralow power consumption, superior sensitivity, and high intelligence. Herein, self-powered integrated nanostructured-gas-sensor (SINGOR) systems and a wirelessly connected SINGOR network are demonstrated here. The room-temperature operated SINGOR system can be self-driven by indoor light with a Si solar cell, and it features ultrahigh sensitivity to H2, formaldehyde, toluene, and acetone with the record low limits of detection (LOD) of 10, 2, 1, and 1 ppb, respectively. Each SINGOR consisting of an array of nanostructured sensors has the capability of gas pattern recognition and classification. Furthermore, multiple SINGOR systems are wirelessly connected as a sensor network, which has successfully demonstrated flammable gas leakage detection and alarm function. They can also achieve gas leakage localization with satisfactory precision when deployed in one single room. These successes promote the development of using nanostructured-gas-sensor network for wide range applications including smart home/building and future smart city.
RESUMO
Smart solar-blind UV-C band photodetectors suffer from low responsivity in a self-powered mode. Here, we address this issue by fabricating a novel enhanced solar-blind UV-C photodetector array based on solution-processed n-ZnO quantum dots (QDs) functionalized by p-CuO micro-pyramids. Self-assembled catalyst-free p-CuO micro-pyramid arrays are fabricated on a pre-ablated Si substrate by pulsed laser deposition without a need for a catalyst layer or seeding, while the solution-processed n-ZnO QDs are synthesized by the femtosecond-laser ablation in liquid technique. The photodetector is fabricated by spray-coating ZnO QDs on a CuO micro-pyramid array. The photodetector performance is optimized via a p-n junction structure as both p-ZnO QDs and p-CuO micro-pyramid layers are characterized by wide band gap energies. Two photodetectors (with and without CuO micro-pyramids) are fabricated to show the role of p-CuO in enhancing the device performance. The n-ZnO QD/p-CuO micro-pyramid/Si photodetector is characterized by a superior photo-responsivity of â¼956 mA/W at 244 nm with a faster photoresponse (<80 ms) and 260 nm cut-off compared to ZnO QDs/Si photodetectors, confirming that the p-CuO micro-pyramids enhance the device performance. The self-powered photoresponse with a high photo-responsivity of â¼29 mA/W is demonstrated. These high-responsivity solar-bind UV-C photodetector arrays can be used for a wide range of applications.
RESUMO
Calcium stannate (CaSnO3) is an inorganic perovskite material with an ultrawide bandgap (4.2-4.4 eV) that is associated with its unique structural characteristics. Owing to its remarkable optical and electric properties and high physical and chemical stability, it has recently drawn significant interest for various applications such as photocatalysts for the degradation of organic compounds and hydrogen production under UV radiation, gas sensors, and thermally stable capacitors. In this study, we demonstrate a self-powered deep-UV (DUV) p-i-n photodetector consisting of CaSnO3 thin film as an efficient DUV absorber via a low-temperature solution process. The physical, optical, and electrical properties of the as-synthesized CaSnO3 are characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy, ultraviolet-visible spectroscopy, photoluminescence spectroscopy, space charge limited current, and four-point probe measurements. As a key component in a p-i-n DUV photodetector, the thickness of the CaSnO3 absorber layer and operating bias are optimized to enhance charge carrier transport, light absorption, and signal-to-noise ratio. As a result, the optimized device shows a high performance at zero bias under 254 nm UV illumination: with a specific detectivity of 1.56 × 1010 Jones, fast rise/fall time of 80/70 ms, and high 254:365 nm photocurrent rejection ratio of 5.5 along with a stable photoresponse during 100 continuous cycles initially as well as after 1 month of storage. Accordingly, this study suggests that a novel CaSnO3-based photodiode prepared via a solution process can be employed for many practical DUV-detection applications.
RESUMO
Long-term and low-dose photodynamic therapy for treating tumors requires a sustainable energy supply. The power source technology of batteries and wireless charging for driving a light-emitting diode (LED) may cause inconveniences during treatment. In addition, the development of telemedicine and Internet medicine put forward higher demands on treatment methods, such as better patient compliance and autonomous management. Here, we show a self-powered photodynamic therapy (s-PDT) system with two different irradiation modes that can be autonomously managed by patients. The as-fabricated s-PDT system based on a twinning structured piezoelectric nanogenerator is powered by energy harvested from body motion and realizes effective tumor tissue killing and inhibition. As demonstrated at the cellular level, the s-PDT system can significantly suppress tumor cell growth with the pulsed light stimulation mode. When the miniature LED was implanted subcutaneously in mice with transplanted tumors, the s-PDT system led to significant antitumor effects by irradiation with intermittent continuous light stimulation mode for 12 days, and an 87.46% tumor inhibition rate was obtained. This innovative s-PDT system combined with two treatment modes may provide a great opportunity to develop wearable/implantable and self-controllable devices for long-term photodynamic therapy, which would be a promising method for clinical cancer treatment.