RESUMO
Macromolecular phase separation is thought to be one of the processes that drives the formation of membraneless biomolecular condensates in cells. The dynamics of phase separation are thought to follow the tenets of classical nucleation theory, and, therefore, subsaturated solutions should be devoid of clusters with more than a few molecules. We tested this prediction using in vitro biophysical studies to characterize subsaturated solutions of phase-separating RNA-binding proteins with intrinsically disordered prion-like domains and RNA-binding domains. Surprisingly, and in direct contradiction to expectations from classical nucleation theory, we find that subsaturated solutions are characterized by the presence of heterogeneous distributions of clusters. The distributions of cluster sizes, which are dominated by small species, shift continuously toward larger sizes as protein concentrations increase and approach the saturation concentration. As a result, many of the clusters encompass tens to hundreds of molecules, while less than 1% of the solutions are mesoscale species that are several hundred nanometers in diameter. We find that cluster formation in subsaturated solutions and phase separation in supersaturated solutions are strongly coupled via sequence-encoded interactions. We also find that cluster formation and phase separation can be decoupled using solutes as well as specific sets of mutations. Our findings, which are concordant with predictions for associative polymers, implicate an interplay between networks of sequence-specific and solubility-determining interactions that, respectively, govern cluster formation in subsaturated solutions and the saturation concentrations above which phase separation occurs.
Assuntos
Condensados Biomoleculares , Proteínas de Ligação a RNA , Biofísica , Mutação , Motivos de Ligação ao RNA , Proteínas de Ligação a RNA/genéticaRESUMO
The effectiveness of the room-temperature strengthening strategy for aluminum (Al) is compromised at increased temperatures due to grain and precipitate phase coarsening. Overcoming the heightened activity of grain boundaries and dislocations poses a significant challenge in enhancing the high-temperature strength through traditional precipitation strengthening. This study presents novel strengthening strategies that integrate intergranular reinforcements, intragranular reinforcements, refined grain, and stacking faults within an (Al2O3+Al3Ti)/Al composite prepared using sol-gel and powder metallurgy technology. Excellent high-temperature tensile properties are achieved; also, a remarkable fatigue performance at increased temperatures that surpasses those of other existing Al alloys and composites is revealed. These superior characteristics can be attributed to its exceptionally stable microstructure and the synergistic strengthening mechanisms mentioned above. This work offers new insights into designing and fabricating thermally stable Al matrix composites for high-temperature applications.
RESUMO
BACKGROUND: Carbon nano sol (CNS) can markedly affect the plant growth and development. However, few systematic analyses have been conducted on the underlying regulatory mechanisms in plants, including tobacco (Nicotiana tabacum L.). RESULTS: Integrated analyses of phenome, ionome, transcriptome, and metabolome were performed in this study to elucidate the physiological and molecular mechanisms underlying the CNS-promoting growth of tobacco plants. We found that 0.3% CNS, facilitating the shoot and root growth of tobacco plants, significantly increased shoot potassium concentrations. Antioxidant, metabolite, and phytohormone profiles showed that 0.3% CNS obviously reduced reactive oxygen species production and increased antioxidant enzyme activity and auxin accumulation. Comparative transcriptomics revealed that the GO and KEGG terms involving responses to oxidative stress, DNA binding, and photosynthesis were highly enriched in response to exogenous CNS application. Differential expression profiling showed that NtNPF7.3/NtNRT1.5, potentially involved in potassium/auxin transport, was significantly upregulated under the 0.3% CNS treatment. High-resolution metabolic fingerprints showed that 141 and 163 metabolites, some of which were proposed as growth regulators, were differentially accumulated in the roots and shoots under the 0.3% CNS treatment, respectively. CONCLUSIONS: Taken together, this study revealed the physiological and molecular mechanism underlying CNS-mediated growth promotion in tobacco plants, and these findings provide potential support for improving plant growth through the use of CNS.
Assuntos
Carbono , Metabolômica , Nicotiana , Reguladores de Crescimento de Plantas , Transcriptoma , Nicotiana/genética , Nicotiana/metabolismo , Nicotiana/crescimento & desenvolvimento , Carbono/metabolismo , Reguladores de Crescimento de Plantas/metabolismo , Perfilação da Expressão Gênica , Metaboloma , Raízes de Plantas/metabolismo , Raízes de Plantas/crescimento & desenvolvimento , Raízes de Plantas/genética , Brotos de Planta/metabolismo , Brotos de Planta/crescimento & desenvolvimento , Brotos de Planta/genéticaRESUMO
Anisotropic colloidal particles with asymmetric morphology possess functionally rich heterogeneous structures, thus offering potential for intricate superstructures or nanodevices. However, it is a challenge to achieve controlled asymmetric surface partitioned growth. In this work, an innovative strategy is developed based on the selective adsorption and growth of emulsion droplets onto different regions of object which is controlled by wettability. It is found that the emulsion droplets can selectively adsorb on the hydrophilic surface but not the hydrophobic one, and further form asymmetric tentacle by the interfacial sol-gel process along its trajectory. Janus particles with an anisotropic shape and multitentacle structure are achieved via integration of emulsion droplet (soft) and seed (hard) templates. The size and number of tentacles exhibit tunability mediated by soft and hard templates, respectively. This general strategy can be expanded to a variety of planar substrates or curved particles, further confirming the correlation between tentacle growth and Brownian motion. Most interestingly, it can be employed to selectively modify one region of surface partitioned particles to achieve an ABC three-component Janus structure.
RESUMO
Among diverse chemical synthetic approaches to zinc oxide nanocrystals (ZnO NCs), ubiquitous inorganic sol-gel methodology proved crucial for advancements in ZnO-based nanoscience. Strikingly, unlike the exquisite level of control over morphology and size dispersity achieved in ZnO NC syntheses, the purity of the crystalline phase, as well as the understanding of the surface structure and the character of the inorganic-organic interface, have been limited to vague descriptors until very recently. Herein, ZnO NCs applying the standard sol-gel synthetic protocol are synthesized with zinc acetate and lithium hydroxide and tracked the integration of lithium (Li) cations into the interior and exterior of nanoparticles by combining various techniques, including advanced solid-state NMR methods. In contrast to common views, it is demonstrated that Li+ ions remain kinetically trapped in the inorganic core, enter into a shallow subsurface layer, and generate "swelling" of the surface and interface regions. Thus, this work enabled both the determination of the NCs' structural imperfections and an in-depth understanding of the unappreciated role of the Li+ ions in impacting the doping and the passivation of sol-gel-derived ZnO nanomaterials.
RESUMO
Mesoporous honeycomb iron titanate using a sol-gel, evaporation-induced self-assembly method is synthesized. A triblock copolymer, F127, serves as a structure-directing agents, with iron chloride and titanium (IV) isopropoxide as inorganic precursors. The strong intermolecular force of attraction among urea, metal precursors, and polymer led to the formation of the mesoporous honeycomb structure. The study of physicochemical properties using different techniques reveals the formation of microstructures with a remarkable degree of porosity. The amorphous iron titanate outperforms the photochemical generation of H2 due to its disorderly structural arrangement and incomplete crystal formation. The randomness on the structure provides more area for catalytic reaction by providing more contact with the reactant and superior light absorption capability. The high amount of hydrogen gas, 40.66 mmolg-1h-1, is observed in the investigation over 3 h of activity for the iron titanate honeycomb sample. This yield is a more significant amount compared to the obtained for the commercially available TiO2 (23.78 mmolg-1h-1). The iron titanate materials synthesized with low-cost materials and methods are very effective and have the potential for hydrogen generation.
RESUMO
Nasal administration can bypass the blood-brain barrier and directly deliver drugs to the brain, providing a non-invasive route for central nervous system (CNS) diseases. Inspired by the appearance that a gate can block the outside world and the characteristics of the sol-gel transition can form a "gate" in the nasal cavity, a Drop to Gate nasal drop (DGND) is designed to set a gate in nose, which achieves protecting role from the influence of nasal environment. The DGND demonstrates the efficiency and application prospect of delivering drugs to the brain through the N-to-B. The effective concentration of single administration is increased through the hydrophobic interaction between C8-GelMA and SRT1720 (SA), and then cross-linked under UV to form nanogel, which can respond to MMP in the inflammatory microenvironment of sepsis-induced cognitive dysfunction. Finally, the SA/nanogel is compounded into the thermogel, which can respond to the nasal cavity temperature to form DGND in situ, increasing the residence time and delivery efficiency of drugs in the nasal cavity. In vitro, the DGND alleviates lipopolysaccharides (LPS)-induced BV2 inflammation. In vivo, DGND effectively targets the nasal mucosa and deliver drugs to the brain, which activate Sirt1 to alleviate inflammation mediated by microglia and improve cognitive dysfunction in sepsis mice.
RESUMO
Partial substitution of V by other transition metals in Na3 V2 (PO4 )3 (NVP) can improve the electrochemical performance of NVP as a cathode for sodium-ion batteries (SIBs). Herein, phosphate Na-V-Mn-Ni-containing composites based on NASICON (Natrium Super Ionic Conductor)-type structure have been fabricated by sol-gel method. The synchrotron-based X-ray study, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) studies show that manganese/nickel combinations successfully substitute the vanadium in its site within certain limits. Among the received samples, composite based on Na3.83 V1.17 Mn0.58 Ni0.25 (PO4 )3 (VMN-0.5, 108.1 mAh g-1 at 0.2 C) shows the highest electrochemical ability. The cyclic voltammetry, galvanostatic intermittent titration technique, in situ XRD, ex situ XPS, and bond valence site energy calculations exhibit the kinetic properties and the sodium storage mechanism of VMN-0.5. Moreover, VMN-0.5 electrode also exhibits excellent electrochemical performance in quasi-solid-state sodium metal batteries with PVDF-HFP quasi-solid electrolyte membranes. The presented work analyzes the advantages of VMN-0.5 and the nature of the substituted metal in relation to the electrochemical properties of the NASICON-type structure, which will facilitate further commercialization of SIBs.
RESUMO
Combinatorial sensing is especially important in the context of modern drug development to enable fast screening of large data sets. Mesoporous silica materials offer high surface area and a wide range of functionalization possibilities. By adding structural control, the combination of structural and functional control along all length scales opens a new pathway that permits larger amounts of analytes being tested simultaneously for complex sensing tasks. This study presents a fast and simple way to produce mesoporous silica in various shapes and sizes between 0.27-6 mm by using light-induced sol-gel chemistry and digital light processing (DLP). Shape-selective functionalization of mesoporous silica is successfully carried out either after printing using organosilanes or in situ while printing through the use of functional mesopore template for the in situ functionalization approach. Shape-selective adsorption of dyes is shown as a demonstrator toward shape selective screening of potential analytes.
RESUMO
Inorganic thick-film dielectric capacitors with ultrahigh absolute recovered energy at low electric fields are extremely desired for their wide application in pulsed power systems. However, a long-standing technological bottleneck exists between high absolute energy and large recovered energy density. A new strategy is offered to fabricate selected all-inorganic 0-3 composite thick films up to 10 µm by a modified sol-slurry method. Here, the ceramic powder is dispersed into the sol-gel matrix to form a uniform suspension, assisted by powder, therefore, the 2 µm-thickness after single layer spin coating. To enhance the energy-storage performances, the composites process is thoroughly optimized by ultrafine powder (<50 nm) technique based on a low-cost coprecipitation method instead of the solid-state and sol-gel methods. 0D coprecipitation powder has a similar dielectric constant to the corresponding 3D films, thus uneven electrical field distributions is overcome. Moreover, the increase of interfacial polarization is realized due to the larger specific surface area. A maximum recoverable energy density of 14.62 J cm-3 is obtained in coprecipitation thick films ≈2.2 times that of the solid-state powder and ≈1.3 times for sol-gel powder. This study provides a new paradigm for further guiding the design of composite materials.
RESUMO
Garnet-type Li7 La3 Zr2 O12 (LLZO) solid-state electrolytes hold great promise for the next-generation all-solid-state batteries. An in-depth understanding of the phase transformation during synthetic processes is required for better control of the crystallinity and improvement of the ionic conductivity of LLZO. Herein, the phase transformation pathways and the associated surface amorphization are comparatively investigated during the sol-gel and solid-state syntheses of LLZO using in situ heating transmission electron microscopy (TEM). The combined ex situ X-ray diffraction and in situ TEM techniques are used to reveal two distinct phase transformation pathways (precursors â La2 Zr2 O7 â LLZO and precursors â LLZO) and the subsequent layer-by-layer crystal growth of LLZO on the atomic scale. It is also demonstrated that the surface amorphization surrounding the LLZO crystals is sensitive to the postsynthesis cooling rate and significantly affects the ionic conductivity of pelletized LLZO. This work brings up a critical but often overlooked issue that may greatly exacerbate the Li-ion conductivity by undesired synthetic conditions, which can be leveraged to ameliorate the overall crystallinity to improve the electrochemical performance of LLZO. These findings also shed light on the significance of optimizing surface structure to ensure superior performance of Li-ion conductors.
RESUMO
A hybrid thin film was fabricated by doping graphene oxide into a sol-gel solution containing a mixture of zirconium, bismuth, and indium oxide. The thin film was fabricated using a brush coating process. The graphene oxide doping ratios used were 0, 5, and 15 wt%. During the thin film fabrication process, the produced sol-gel solution generates a contractile force due to the shear stress of the brush bristles, resulting in a microgroove structure. This structure was confirmed through scanning electron microscopy analysis, which revealed the clear presence of rGO. Comparing the electrical properties of a zirconium bismuth indium oxide thin film without graphene oxide doping and a thin film doped with 15 wt% graphene oxide, the electro-optical properties were significantly improved with graphene oxide doping. In general, the threshold voltage decreased by approximately 0.42 V. In addition, bandgap measurements confirmed the improved conductivity characteristics with graphene oxide doping. Since this improvement in electro-optical properties is associated with the reduction process due to graphene oxide doping, X-ray photoelectron spectroscopy analysis was performed to assess the intensity change of each element. Based on these observations, hybrid thin films doped with graphene oxide emerge as promising candidates for next generation thin film.
RESUMO
Sol-gel-derived silica thin films generated onto electrode surfaces in the form of organic-inorganic hybrid coatings or other composite layers have found tremendous interest for being used as platforms for the development of electrochemical sensors and biosensors. After a brief description of the strategies applied to prepare such materials, and their interest as electrode modifier, this review will summarize the major advances made so far with composite silica-based films in electroanalysis. It will primarily focus on electrochemical sensors involving both non-ordered composite films and vertically oriented mesoporous membranes, the biosensors exploiting the concept of sol-gel bioencapsulation on electrode, the spectroelectrochemical sensors, and some others.
RESUMO
Binary metal oxides possess unique structures and multiple oxidation states, making them highly valuable in electrochemical analysis. This study aims to determine the effect of annealing temperature on the electrochemical properties of magnesium ferrite when used as an electrode material in a neutral aqueous electrolyte. We utilized the sol-gel technique to synthesize the material and annealed it at various temperatures. Our analysis of the material using different characterization techniques reveals significant changes in its structural and electrochemical properties. We found that the material exhibited a range of phases, and higher annealing temperatures led to improved electrochemical properties. The electrochemical measurements showed reversible and redox pseudo-capacitance behavior, with the material annealed at 500 °C exhibiting the highest specific capacitance of 117 F g-1at a current density of 0.5 A g-1. Capacitive and diffusion-controlled processes govern the total charge storage mechanism, and their contribution changes significantly as the annealing temperature varies. The capacitance retention of 500 °C annealed sample was 58% and it remained stable. This work establishes a correlation between annealing temperature on structural, morphological, and electrochemical behavior, thereby opening up avenues for tailoring them effectively. These findings can be useful in the development of future electrode materials for electrochemical applications.
RESUMO
Deoxyribonucleic acid (DNA) capped silver nanoparticles are exceptional nanomaterials, featuring precise size and shape control enabled by DNA as a capping agent. DNA stabilizes these nanoparticles' role leading to uniform structures for diverse applications. These nanoparticles are excellent in photonics and medical applications, enhancing fluorescence and medical imaging. In this study, we explore the multifaceted applications of DNA-capped silver nanoparticles, delving into their optical, photocatalytic, antibacterial, cytotoxic, and bioimaging properties. Employing UV-visible absorption spectroscopy and scanning electron microscopy, we provide an analysis of confirmation of silver nanoparticles. The investigation demonstrates substantial photocatalytic efficacy, photodegradation of methylene blue is higher than rhodamine 6G. The presence of silver nanoparticles enhances the fluorescence of rhodamine 6G doped sol-gel glasses. Furthermore, our findings illustrate significant antibacterial effects, encompassing both Gram-positive and Gram-negative bacteria, with DNA-capped silver nanoparticles exhibiting antibacterial activity. Cytotoxicity assessments on HeLa cells reveal concentration-dependent effects, with an LC50 value of 47 µL. Additionally, the in vitro experiments with HeLa cells suggest the promising utility of DNA-capped silver nanoparticles for bioimaging applications. This comprehensive analysis highlights the multifunctionality and potential of DNA-capped silver nanoparticles, offering promising avenues for further exploration and innovation within various scientific domains, particularly in the realm of nanomaterial research.
RESUMO
A fixed Nd3+ and varied Yb3+ ion concentration were incorporated in a Zinc-Silicate (SZNYX) composite solution using ex-situ sol-gel solution to fabricate a novel thin film (TF) on Si (100)-substrate. The upconversion luminescence (UCL) spectra of the thin films were measured under 980 nm laser excitation, with the most optimized result for Yb3+ ion concentration of 1.5 mol%. Additionally, a 2-D photoluminescence (PL) confocal mapping of the SZNY15-TF material confirmed uniform PL distribution throughout the space under the same excitation wavelength. Structural characterization via XRD revealed the tetragonal Zn2SiO4 nano-crystalline nature of the film at three distinct annealing temperatures. Morphological characterization using the Field-emission scanning electron Microscope (FESEM) coupled with energy dispersion spectrometer (EDS) affirmed the nanoflower structure and the purity of doping purity in the samples, respectively. These findings collectively confirm the promising UCL properties of the SZNYX-TF samples, suggesting potential applications in photonic.
RESUMO
The development of a catalyst with a consistent and clearly defined crystal structure is crucial for establishing an efficient catalytic performance system. This study focuses on catalyzing the reduction of nitroarenes to amino-derivatives in an aquatic environment at ambient temperature, employing metallic (Au) and bimetallic (Au-Pd or Au-Ag) nanoparticles loaded on a Ce-BTC metal-organic framework using a facile sol-immobilization approach. Diverse analytical instruments, comprising SEM, TEM, XRD, FT-IR, XPS, TGA, and N2 isotherm, have been utilized to characterize the synthesized catalysts. Among the catalysts that were fabricated, Au-Pd@Ce-BTC displayed the maximum catalytic efficacy, offering a rate constant (kapp) of 0.5841 min-1, conversion percentages reaching 99.7%, and a KAF of 116.8 min-1g-1. Moreover, it exhibited remarkable recyclability over five consecutive cycles. This catalyst offers the advantages of operating under ambient reaction conditions and exhibiting tolerance to a broad range of substrates containing various functional moieties. The mechanistic understanding of nitroarene reduction and the factors contributing to the superior activity of Au-Pd/Ce-BTC are explored through spectroscopic and porosity analyses. Spectroscopic measurements indicate that the elevated Auo and Pdo/Pd2+ ratio, increased surface area, and the synergistic collaboration of the bimetallic NPs are key factors contributing to the heightened activity of Au-Pd/Ce-BTC. These findings hold significant appeal from both an industrial and academic standpoint.
Assuntos
Nanopartículas Metálicas , Nanopartículas Metálicas/química , Catálise , Ouro/química , Estruturas Metalorgânicas/química , Oxirredução , Paládio/química , Cério/química , Poluentes Químicos da Água/químicaRESUMO
OBJECTIVE: This study evaluates the impact of a representative proton pump inhibitor (PPI) (omeprazole), administered simultaneously or staggered, on the pharmacokinetics of levothyroxine (LT4) solution (Tirosint-SOL). METHODS: This was a randomized, 3-way crossover, comparative bioavailability study in 36 healthy adults under fasting conditions. Omeprazole 40 mg delayed-release capsule was administered once daily from Day 1 to 6 (mornings, Treatment-A; evenings, Treatment-B; none, Treatment-C) to increase and stabilize gastric pH. In the morning of Day 5, a single dose of LT4 solution 600 mcg was administered. Blood samples were collected 0 to 48 hours post-LT4 administration. Noncompartmental pharmacokinetic parameters were calculated for total serum thyroxine using baseline-corrected data. Maximum concentration (Cmax) and area under the concentration-time curve (AUC0-48) were included in an analysis of variance to obtain geometric mean ratios and 90% confidence intervals. RESULTS: For both comparisons (A/C and B/C), geometric mean ratios and 90% confidence intervals for all parameters were within the equivalence boundaries (80%-125%), indicating bioequivalence: for A/C, AUC0-48 98.98% [94%-104%], and Cmax 91.68% [87%-97%]; for B/C, AUC0-48 98.94% [95%-103%], and Cmax 94.90% [90%-100%]. Median Tmax (time associated with Cmax) was similar across treatments. CONCLUSION: This study demonstrated that Tirosint-SOL bioavailability is unaffected by coadministration of a representative PPI, given simultaneously or staggered by about 12 hours, compared to administration of LT4 solution alone. For hypothyroid patients on PPI therapy, administration of LT4 solution may reduce variations in thyroid stimulating hormone levels related to intermittent use of acid-reducing drugs and consequently the need for dose adjustments.
Assuntos
Disponibilidade Biológica , Estudos Cross-Over , Omeprazol , Inibidores da Bomba de Prótons , Tiroxina , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Adulto Jovem , Interações Medicamentosas , Omeprazol/farmacocinética , Omeprazol/administração & dosagem , Inibidores da Bomba de Prótons/administração & dosagem , Inibidores da Bomba de Prótons/farmacocinética , Inibidores da Bomba de Prótons/farmacologia , Tiroxina/farmacocinética , Tiroxina/administração & dosagem , Tiroxina/sangueRESUMO
Eu3+ ,Dy3+ co-doped Sr2 LaZrO5.5 -based phosphors were prepared through a sol-gel method. Through characterization, it was found that the Sr2 LaZrO5.5 -based fluorescent powder co-doped with Eu3+ and Dy3+ had a cubic structure. At an excitation wavelength of 290 nm, the substrate Sr2 LaZrO5.5 exhibited strong blue emission at 468 nm, and the Sr2 LaZrO5.5 :18%Eu3+ phosphor exhibited a strong red emission peak at 612 nm. When the doping amount of Dy3+ was 5, 8, 12, 15, or 18%, the Sr2 LaZrO5.5 :18%Eu3+ phosphor changed from an orange-red light, to a warm white light, and to a cold white light. According to the emission spectra, the emission intensities of the substrates Sr2 LaZrO5.5 and Sr2 LaZrO5.5 :Eu3+ decreased with increasing Dy3+ concentration, confirming the energy transfer between the host Sr2 LaZrO5.5 -Eu3+ ,Dy3+ , and resulting in a lower CCT value, with significantly improved white light emission.
Assuntos
Disprósio , Luminescência , Disprósio/química , Luz , Transferência de Energia , Luz VermelhaRESUMO
This study presents a novel approach for the fabrication of a Co,Ni/MoS2-derived nanohybrid material using wheat straw extract. The facile synthesis method involves a sol-gel process, followed by calcination, showcasing the potential of agricultural waste as a sustainable reducing and chelating reagent. The as-prepared nanohybrid has been characterized using different techniques to analyse its physicochemical properties. X-ray diffraction analysis confirmed the successful synthesis of the nanohybrid material, identifying the presence of NiMoO4, CoSO4 and Mo17O47 as its components. Fourier-transform infrared spectroscopy differentiated the functional groups present in the wheat straw biomass and those in the nanohybrid material, highlighting the formation of metal-oxide and sulphide bonds. Scanning electron microscopy revealed a heterogeneous morphology with agglomerated structures and a grain size of around 70 nm in the nanohybrid. Energy-dispersive X-ray spectroscopy analysis shows the composition of elements with weight percentages of (Mo) 9.17%, (S) 6.21%, (Co) 12.48%, (Ni) 12.18% and (O) 50.46% contributing to its composition. Electrochemical analysis performed through cyclic voltammetry showcased the exceptional performance of the nanohybrid material as compared with MoS2, suggesting its possible applications for designing biosensors and related technologies. Thus, the research study presented herein underscores the efficient utilization of natural resources for the development of functional nanomaterials with promising applications in various fields. This study paves a way for manufacturing innovation along with advancement of novel synthesis method for sustainable nanomaterial for future technological developments.