Chemical and sensory characterization of coffee from Coffea arabica cv. Mundo Novo and cv. Catuai Vermelho obtained by four different post-harvest processing methods.

BACKGROUND: After the harvest, green coffee beans are dried on the farm using several methods: the wet process, natural process, pulped natural process, or mechanical demucilaging. This study evaluated how the choice of a specific processing method influenced the volatile organic compounds of the coffee beans, before and after roasting, and the sensory characteristics of the beverage. Coffea arabica beans of two varieties (cv. Mundo Novo and cv. Catuai Vermelho) were subjected to these four processing methods on a single farm in the Cerrado area of Brazil. RESULTS: Analysis by gas chromatography-mass spectrometry headspace solid-phase microextraction identified 40 volatile organic compounds in green coffee beans and 37 in roasted beans. The main difference between post-harvest treatments was that naturally processed green beans of both varieties contained a different profile of alcohols, acids, and lactones. In medium-roasted beans, those differences were not observed. The coffee beverages had similar taste attributes but distinct flavor profiles. Some of the treatments resulted in specialty-grade coffee, whereas others did not. CONCLUSION: The choice of a specific post-harvest processing method influences the volatile compounds found in green beans, the final beverage's flavor profile, and the cupping score, which can have a significant impact on the profitability of coffee farms' operations. © 2022 Society of Chemical Industry.

GC/MS based metabolite profiling of Indonesian specialty coffee from different species and geographical origin.

INTRODUCTION: The consumption of high quality coffee such as specialty Arabica and fine Robusta coffee is increasing steadily in recent years. Development of single origin coffee is an important strategy to maintain coffee quality, grade and high cupping score. Indonesia is a top exporting country for Arabica coffee with high variety of specialty coffees from different origins. Despite its long standing reputation in global coffee market, very few is known about the variability among Indonesian specialty coffees. OBJECTIVES: This study aims to observe metabolite variability among Indonesian coffees from different species and geographical origins by means of non-targeted GC/MS metabolite profiling. METHODS: Sixty-four compounds were tentatively identified from 16 green and roasted coffee beans from different species and cultivation areas in Indonesia and were subjected to principal component analysis (PCA). Ten Specialty Arabica coffee and five Fine Robusta representing all important high quality coffees of Indonesia were also analyzed independently to further classify Indonesian coffee according to their origin. RESULTS: PCA results of 16 green and roasted coffee beans of different species and cultivation areas showed that samples were separated along PC1 based on different roasting condition (green and roasted) with 52.9% variance and were separated along PC2 based on different species with 19.3% variance. The result from this study showed the clustering of samples based on three major cultivation areas in Indonesia (western, central, eastern part). Metabolites showing higher concentration in Sulawesi, Papua, Flores and Sumatra samples were glycerol, glucuno-1,5-lactone, gluconic acid and sorbitol. A clear distinction in galactitol and galactinol concentration between all samples from eastern part of Indonesia and western and middle part of Indonesia was also observed. CONCLUSIONS: Our results showed that each region (western, central and eastern part of Indonesia) has signature compounds that may serve as discriminant markers for coffee authentication. This is the first report on the classification of Indonesian specialty coffee based on their metabolic profiles and can act as a basis for marker identification for routine procedures in industry.

A one-class classification approach for authentication of specialty coffees by inductively coupled plasma mass spectroscopy (ICP-MS).

Due to the lucrative nature of specialty coffees, there have been instances of adulteration where low-cost materials are mixed in to increase the overall volume, resulting in illegal profit. A widely used and recommended approach to detect possible adulteration is the application of one-class classifiers (OCC), which only require information about the target class to build the models. Thus, this work aimed to identify adulterations in specialty coffees with low-quality coffee using multielement analysis determined by ICP-MS and to evaluate the performance of one-class classifiers (dd-SIMCA, OCRF, and OCPLS). Therefore, authentic specialty coffee samples were adulterated with low-quality coffee in 25 % to 75 % (w/w) proportions. Samples were subjected to acid decomposition for analysis by ICP-MS. OCPLS method presented the best performance to detect adulterations with low-quality coffee in specialty coffees, showing higher specificity (SPE = 100 %) and reliability rate (RLR = 94.3 %).

Effects of geographical origin and post-harvesting processing on the bioactive compounds and sensory quality of Brazilian specialty coffee beans.

Specialty coffee beans are those produced, processed, and characterized following the highest quality standards, toward delivering a superior final product. Environmental, climatic, genetic, and processing factors greatly influence the green beans' chemical profile, which reflects on the quality and pricing. The present study focuses on the assessment of eight major health-beneficial bioactive compounds in green coffee beans aiming to underscore the influence of the geographical origin and post-harvesting processing on the quality of the final beverage. For that, we examined the non-volatile chemical profile of specialty Coffea arabica beans from Minas Gerais state, Brazil. It included samples from Cerrado (Savannah), and Matas de Minas and Sul de Minas (Atlantic Forest) regions, produced by two post-harvesting processing practices. Trigonelline, theobromine, theophylline, chlorogenic acid derivatives, caffeine, caffeic acid, ferulic acid, and p-coumaric acid were quantified in the green beans by high-performance liquid chromatography with diode array detection. Additionally, all samples were roasted and subjected to sensory analysis for coffee grading. Principal component analysis suggested that Cerrado samples tended to set apart from the other geographical locations. Those samples also exhibited higher levels of trigonelline as confirmed by two-way ANOVA analysis. Samples subjected to de-pulping processing showed improved chemical composition and sensory score. Those pulped coffees displayed 5.8% more chlorogenic acid derivatives, with an enhancement of 1.5% in the sensory score compared to unprocessed counterparts. Multivariate logistic regression analysis pointed out altitude, ferulic acid, p-coumaric acid, sweetness, and acidity as predictors distinguishing specialty coffee beans obtained by the two post-harvest processing. These findings demonstrate the influence of regional growth conditions and post-harvest treatments on the chemical and sensory quality of coffee. In summary, the present study underscores the value of integrating target metabolite analysis with statistical tools to augment the characterization of specialty coffee beans, offering novel insights for quality assessment with a focus on their bioactive compounds.

Exploring Microbial Influence on Flavor Development during Coffee Processing in Humid Subtropical Climate through Metagenetic-Metabolomics Analysis.

Research into microbial interactions during coffee processing is essential for developing new methods that adapt to climate change and improve flavor, thus enhancing the resilience and quality of global coffee production. This study aimed to investigate how microbial communities interact and contribute to flavor development in coffee processing within humid subtropical climates. Employing Illumina sequencing for microbial dynamics analysis, and high-performance liquid chromatography (HPLC) integrated with gas chromatography-mass spectrometry (GC-MS) for metabolite assessment, the study revealed intricate microbial diversity and associated metabolic activities. Throughout the fermentation process, dominant microbial species included Enterobacter, Erwinia, Kluyvera, and Pantoea from the prokaryotic group, and Fusarium, Cladosporium, Kurtzmaniella, Leptosphaerulina, Neonectria, and Penicillium from the eukaryotic group. The key metabolites identified were ethanol, and lactic, acetic, and citric acids. Notably, the bacterial community plays a crucial role in flavor development by utilizing metabolic versatility to produce esters and alcohols, while plant-derived metabolites such as caffeine and linalool remain stable throughout the fermentation process. The undirected network analysis revealed 321 interactions among microbial species and key substances during the fermentation process, with Enterobacter, Kluyvera, and Serratia showing strong connections with sugar and various volatile compounds, such as hexanal, benzaldehyde, 3-methylbenzaldehyde, 2-butenal, and 4-heptenal. These interactions, including inhibitory effects by Fusarium and Cladosporium, suggest microbial adaptability to subtropical conditions, potentially influencing fermentation and coffee quality. The sensory analysis showed that the final beverage obtained a score of 80.83 ± 0.39, being classified as a specialty coffee by the Specialty Coffee Association (SCA) metrics. Nonetheless, further enhancements in acidity, body, and aftertaste could lead to a more balanced flavor profile. The findings of this research hold substantial implications for the coffee industry in humid subtropical regions, offering potential strategies to enhance flavor quality and consistency through controlled fermentation practices. Furthermore, this study contributes to the broader understanding of how microbial ecology interplays with environmental factors to influence food and beverage fermentation, a topic of growing interest in the context of climate change and sustainable agriculture.

Effect of processing method (natural, washed, honey, fermentation, maceration) on the availability of heavy metals in specialty coffee.

The aim of this study was to determine the effect of various methods of processing, such as natural, washed, honey, anaerobic fermentation, and carbonic maceration, on the contents of heavy metals in green and roasted specialty coffees from various countries of origin (Ethiopia, Kenya, Rwanda, Burundi, Guatemala, Nicaragua, and Peru). The heavy metals aluminium (Al), nickel (Ni), chromium (Cr), cadmium (Cd), copper (Cu), and lead (Pb) were identified by a multi-element technique using inductively coupled plasma mass spectrometry. Mercury (Hg) content was determined by atomic absorption spectrometry. The processing method affected the contents of Hg, Al, Ni, Cr, Cd, and Pb in the green and roasted coffees (p < 0.001). Hg content varied in the green coffees processed by fermentation methods vs natural or washed methods (i.e. Rwandan and Guatemalan coffees). Cd content was highest in Guatemalan green coffee processed using carbonic maceration (0.062 mg/kg). Pb content differed between the Ethiopian and Rwandan roasted coffees, with the highest content in the washed method (0.252 mg/kg). The correlations between the contents of Cu and Al, Ni and Cr, and Pb and Cr were significant for both the roasted and green beans. In conclusion, the method of processing can affect the contents of heavy metals in green and roasted specialty coffees. Monitoring heavy metals when processing coffee with new methods, even though further processing such as roasting can substantially reduce their content in some cases, is therefore important.

Physicochemical and Sensory Properties of Arabica Coffee Beans of Arara cv. Dried Using Different Methods.

The coffee fruit is preferably harvested at the cherry stage, with high moisture and metabolic activity, and must then undergo a drying process for better preservation of the bean and its sensory attributes. In this context, this study aimed to characterize the final quality of the Arara cultivar Arabica coffee processed using the wet method and subjected to six drying methods: three conducted at the agro-industrial establishment (fixed-bed dryer, rotary drum dryer, and combined drying) and three laboratory-scale methods (convective oven, cast-tape drying, and suspended terrace). Drying was carried out to reduce the coffee's moisture content from an initial value of 46.2% on a wet basis (w.b.) to a final average value of 11.35% (w.b.). The fruits of in natura demucilaged coffee and the processed dry coffee beans were characterized for moisture, ash content, nitrogen compounds, lipids, total titratable acidity, organic acids, sugars, and the instrumental color of the beans. The sensory profile of the Arabica coffee was evaluated by five coffee specialists using the methodology proposed by the Specialty Coffee Association (SCA), and all the coffees were classified as a specialty.

Chemical composition and sensory profiling of coffees treated with asparaginase to decrease acrylamide formation during roasting.

Acrylamide is an amide formed in the Maillard reaction, with asparagine as the primary amino acid precursor. The intake of large amounts of acrylamide has induced genotoxic and carcinogenic effects in hormone-sensitive tissues of animals. The enzime asparaginase is one of the most effective methods for lowering the formation of acrylamide in foods such as potatoes. However, the reported sensory outcomes for coffee have been unsatisfactory so far. This study aimed to produce coffees with reduced levels of acrylamide by treating them with asparaginase while retaining their original sensory and bioactive profiles. Three raw samples of Coffea arabica, including two specialty coffees, and one of Coffea canephora were treated with 1000, 2000, and 3000 ASNU of the enzyme. Asparagine and bioactive compounds (chlorogenic acids-CGA, caffeine, and trigonelline) were quantified in raw and roasted beans by HPLC and LC-MS, while the determination of acrylamide and volatile organic compounds was performed in roasted beans by CG-MS. Soluble solids, titratable acidity, and pH were also determined. Professional cupping by Q-graders and consumer sensory tests were also conducted. Results were analyzed by ANOVA-Fisher, MFA, PCA and Cluster analyses, with significance levels set at p ≤ 0.05. Steam treatment alone decreased acrylamide content by 18.4%, on average, and 6.1% in medium roasted arabica and canefora coffees. Average reductions of 32.5-56.0% in acrylamide formation were observed in medium roasted arabica beans when 1000-3000 ASNU were applied. In the canefora sample, 59.4-60.7% reductions were observed. However, steam treatment primarily caused 17.1-26.7% reduction of total CGA and lactones in medium roasted arabica samples and 13.9-22.0% in canefora sample, while changes in trigonelline, caffeine, and other evaluated chemical parameters, including the volatile profiles were minimal. Increasing enzyme loads slightly elevated acidity. The only sensory changes observed by Q-graders and or consumers in treated samples were a modest increase in acidity when 3000 ASNU was used in the sample with lower acidity, loss of mild off-notes in control samples, and increased perception of sensory descriptors. The former was selected given the similarity in chemical outcomes among beans treated with 2000 and 3000 ASNU loads.

Volatile Compounds in Green and Roasted Arabica Specialty Coffee: Discrimination of Origins, Post-Harvesting Processes, and Roasting Level.

The aroma of coffee is a complex mixture of more than 1000 compounds. The volatile compounds in green and roasted coffee were analyzed to detect several features related to quality, roasting level, origins, and the presence of specific defects. With respect to specialty coffee, the flavor profile and peculiarities of the aforementioned characteristics are even more relevant knowing the expectations of consumers to find, in a cup of coffee, unicity bestowed by its origin and post-harvesting processes. In this work, which dealt with 46 lots of specialty Arabica coffee, we used HS-SPME/GC-MS to detect the volatile compounds in green coffees together with those in the same coffees roasted at three different levels to identify whether differences in headspace composition were ascribable to the origin, the post-harvesting processes, and the roasting profiles. The main results are related to the discriminant power of the volatile compounds in green coffee, which are impacted by the origins more than the post-harvesting processes. Compounds such as linalool and 2,3-butanediol were more concentrated in natural coffees, while hexanal was more concentrated in washed varieties (p < 0.05). In roasted coffees, the differences in composition were due to roasting levels, countries of origin, and the post-harvesting processes, in descending order of significance.

Effect of Extraction Methods on Aroma Profile, Antioxidant Activity and Sensory Acceptability of Specialty Coffee Brews.

Specialty coffees from various geographical origins were processed using different extraction methods. Four extraction techniques were employed: cold brew (CB), espresso (ES), French press (FR), and aeropress (AE). The potential health benefits of coffee brews were linked to their antioxidant activity, as determined by the DPPH assay, and total polyphenol content (TPC) measured through the Folin-Ciocalteu reducing-capacity assay. The Columbia (C) espresso coffee type (omni-roasting) exhibited the highest antioxidant activity (86.31 ± 0.70) µmol/100 mL, with a TPC value of (44.41 ± 0.35) mg GAE/g. Quantitative analyses of caffeine and chlorogenic acid were conducted using high-performance liquid chromatography (HPLC). The evaluation of coffee aroma profiles involved the application of headspace solid-phase microextraction/gas chromatography-mass spectrometry (HS-SPME/GC-MS) and was complemented by sensory analysis following the Specialty Coffee Association (SCA) standard protocol. The predominant volatile compounds found in all samples included furans, phenols, pyrazines, and terpenes. The EY espresso type (medium dark roasting) had the highest levels of most coffee volatiles. The C cold brew type (omni-roasting) was rated as the preferred coffee in terms of its sensory characteristics and flavour. In summary, ES and CB were found to be more effective extraction methods for the parameters assessed.

Protein profile and volatile compound associated with fermented coffees with yeast co-inoculation.

This work aims to analyze the protein profile and volatile compounds of coffees fermented with the indigenous microbiota and with the co-inoculation of three yeasts (Saccharomyces cerevisiae, Torulaspora delbrueckii, and Candida parapsilosis). Two-dimensional gel electrophoresis (2D-PAGE), MALDI-ToF/ToF (MS/MS), and gas chromatography (GC-MS) were performed. A total of 72 "spots" were detected by 2D-PAGE. 16 spots were selected for identification by MALDI-ToF/ToF, and 12 were identified (11S protein, 13S globulin basic chain, 17.6 kDa class II heat shock protein (HSP17.6-CII), 18.0 kDa class I heat shock protein, Seed of Late Development Stage, Pru ar 1, and FAR-1 protein). 81 main volatile compounds were detected and classified into alcohols, acids, aldehydes, esters, hydrocarbons, pyrazines, furans, thiols, and pyridines/pyrrols. The difference between the identified volatile compounds and their concentrations was detected in the treatments with and without inoculation after drying. The compounds formed in green coffee during fermentation can participate in several reactions during roasting, presenting different sensory profiles and contributing to coffee quality.

Effect of fermentation on the physicochemical characteristics and sensory quality of Arabica coffee.

This work aims to assess the physicochemical characteristics and final sensory quality of Yellow Catuai IAC 62 Arabica coffee fermented with Saccharomyces cerevisiae. For such a purpose, a Composite Central Rotational Design (CCRD) was performed to investigate how fermentation time,temperature and pH conditions, moisture content and concentration of sugars and organic acids affect its sensory quality on two different roast levels in accordance with Specialty Coffee Association (SCA) protocols. It was found that fructose concentration decreased from 12 g/L to around 5 g/L during fermentation, regardless of temperature condition. Furthermore, longer fermentation times and higher temperatures have lowered sucrose and glucose concentrations from 4 to 2 g/L and 7 g/L to zero, respectively. Glycerol concentration was higher as time and temperature increased, and optimal conditions ranged at temperatures between 24 °C and 32 °C from 35 to 45 h of fermentation time. pH decreased as fermentation time elapsed, but there was a more significant reduction due to higher temperatures, starting at around pH 5 and, lower than 4 under extreme conditions. Contents of organic acids such as acetic, propionic, succinic, and lactic acids, were measured at the final stage of each fermentation process under studied conditions. It was observed that coffee samples achieved final scores ranging from 81 to 85 (SCA score), even in longer times and extreme temperature conditions, thus all samples have been classified as specialty coffees. This work described the initial step towards parameterizing fermentation processes, given that the response variables of temperature and fermentation time, were optimal and enhanced the sensory quality of coffee as beverage. Saccharomyces cerevisiae, a commercial product which has already been made available for producers, can ensure an increase in the sensory quality of coffee.

Simple analytical method using ultraviolet spectral dataset and chemometrics for the authentication of Indonesian specialty ground roasted coffee with different botanical and geographical indications.

The possible application of a simple analytical method based on a UV (ultraviolet) spectral dataset coupled with SIMCA (soft independent modeling of class analogy) for authentication of Indonesian specialty ground roasted coffee with different botanical and geographical indications (GIs) was demonstrated. Three types of Indonesian specialty ground roasted coffee were used: GIs arabica coffee from Gayo Aceh (96 samples), GIs liberica coffee from Meranti-Riau (119 samples), and GIs robusta coffee from Lampung (150 samples) with 1 g weight of each sample. All samples were extracted using hot distilled water and 3 mL aqueous filtered samples were pipetted into a 10 mm quartz cell. Original UV spectral datasets were recorded in the range of 190-399 nm. The pre-processed spectral dataset was generated using three simultaneous different preprocessing techniques: moving average smoothing with 11 segments, standard normal variate (SNV), and Savitzky-Golay (SG) first derivative with window size and polynomial order value of 11 and 2. The supervised classification based on the SIMCA method was applied for preprocessed selected spectral data (250-399 nm). The PCA data showed that GIs coffee with different botanical and geographical indications can be well separated. The SIMCA classification was accepted with 100 % of correct classification (100 % CC). This dataset demonstrated the potential use of UV spectroscopy with chemometrics to perform simple and affordable authentication of Indonesian specialty ground roasted coffee with different botanical and geographical indications (GIs).

Discrimination of Filter Coffee Extraction Methods of a Medium Roasted Specialty Coffee Based on Volatile Profiles and Sensorial Traits.

An untargeted gas chromatography-mass spectrometry (GC-MS) approach combined with sensory analysis was used to present the effects of different extraction methods (i.e., Pure Brew, V60, AeroPress, and French Press) on specialty graded Coffea arabica from Kenya. Partial Least Square Discriminant analysis and hierarchical clustering were applied as multivariate statistical tools in data analysis. The results showed good discrimination and a clear clustering of the groups of samples based on their volatile profiles. Similarities were found related to the filter material and shape used for the extraction. Samples extracted with paper filters (V60 and AeroPress) resulted in higher percentages of caramel-, and flowery-related compounds, while from metal filter samples (Pure Brew and French Press), more fruity and roasted coffees were obtained. Discriminant analysis allowed the identification of eight compounds with a high VIP (variable important in projection) discriminant value (i.e., >1), with 2-furanmethanol being the main feature in discrimination. Sensorial analyses were carried out through an expert panel test. The main evaluations revealed the French Press system as the lowest-scored sample in all the evaluated parameters, except for acidity, where its score was similar to V60. In conclusion, the data obtained from GC-MS analyses were in line with the sensorial results, confirming that the extraction process plays a fundamental role in the flavor profile of filter coffee beverages.

Coffee fermentation process: A review.

In recent years, the importance of controlling coffee fermentation in the final quality of the beverage has been recognized. The literature review was conducted in the Science Direct and Springer databases, considering studies published in the last ten years, 74 references were selected. Several studies have been developed to evaluate and propose fermentation conditions that result in sensory improvements in coffee. So, this review aims to describe detailed the different protocols for conducting the coffee fermentation step and how they could influence the sensory quality of coffee based on the Specialty Coffee Association protocol. We propose a new way to identify coffee post-harvest processing not based on the already known wet, dry and semi-dry processing. The new identification is focused on considering fermentation as a step influenced by the coffee fruit treatment, availability of oxygen, water addition, and starter culture utilization. The findings of this survey showed that each type of coffee fermentation protocol can influence the microbiota development and consequently the coffee beverage. There is a migration from the use of processes in open environments to closed environments with controlled anaerobic conditions. However, it is not possible yet to define a single process capable of increasing coffee quality or developing a specific sensory pattern in any environmental condition. The use of starter cultures plays an important role in the sensory differentiation of coffee and can be influenced by the fermentation protocol applied. The application of fermentation protocols well defined is essential in order to have a good product also in terms of food safety. More research is needed to develop and implement environmental control conditions, such as temperature and aeration, to guarantee the reproducibility of the results.

Understanding the Effects of Self-Induced Anaerobic Fermentation on Coffee Beans Quality: Microbiological, Metabolic, and Sensory Studies.

In this study, an investigation of the microbial community structure and chemical changes in different layers of a static coffee beans fermentation tank (named self-induced anaerobic fermentation-SIAF) was conducted at different times (24, 48, and 72 h). The microbial taxonomic composition comprised a high prevalence of Enterobacteriaceae and Nectriaceae and low prevalence of lactic acid bacteria and yeast, which greatly differs from the traditional process performed in open tanks. No major variation in bacterial and fungal diversity was observed between the bottom, middle, and top layers of the fermentation tank. On the other hand, the metabolism of these microorganisms varied significantly, showing a higher consumption of pulp sugar and production of metabolites in the bottom and middle layers compared to the top part of the fermentation tank. Extended processes (48 and 72 h) allowed a higher production of key-metabolites during fermentation (e.g., 3-octanol, ethyl acetate, and amyl acetate), accumulation in roasted coffee beans (acetic acid, pyrazine, methyl, 2-propanone, 1-hydroxy), and diversification of sensory profiles of coffee beverages compared to 24 h of fermentation process. In summary, this study demonstrated that SIAF harbored radically different dominant microbial groups compared to traditional coffee processing, and diversification of fermentation time could be an important tool to provide coffee beverages with novel and desirable flavor profiles.

Evaluation of roasting and storage conditions as a strategy to improve the sensory characteristics and shelf life of coffee.

Coffee is one of the most consumed products worldwide. Among the varieties of this product, specialty coffee is a type of coffee that has been growing in the world market. This paper aims to assess the effects that the conditions derived from coffee roasting at different altitude levels have on the quality of the product. It was discovered that processing coffee at a higher altitude level yielded a smaller increase in bitterness. This led to a better Specialty Coffee Association (SCA) score in cupping and, consequently, to better preservation of the coffee quality. The storage time affected the aroma by associating roaster aromas with older coffees. Although the assessed origins had the same NIR spectra, differences in peak intensity lead to variations in the flavor and aroma of the coffee. Furthermore, although green beans prolong quality allowing a SCA score of 84.73 ± 2.81 after 4 months of storage, roasted coffee at higher altitudes could also maintain the quality between production and consumption (SCA score of 80.22 ± 0.91 after 2 months). Finally, this research found that the instrumental equipment helped to find minor changes in the sensorial profile, and with these changes correlated with the sensorial panel, the best conditions to preserve coffee quality were found.

Comparison of Spectroscopy-Based Methods and Chemometrics to Confirm Classification of Specialty Coffees.

The Specialty Coffee Association (SCA) sensory analysis protocol is the methodology that is used to classify specialty coffees. However, because the sensory analysis is sensitive to the taster's training, cognitive psychology, and physiology, among other parameters, the feasibility of instrumental approaches has been recently studied for complementing such analyses. Spectroscopic methods, mainly near infrared (NIR) and mid infrared (FTIR-Fourier Transform Infrared), have been extensively employed for food quality authentication. In view of the aforementioned, we compared NIR and FTIR to distinguish different qualities and sensory characteristics of specialty coffee samples in the present study. Twenty-eight green coffee beans samples were roasted (in duplicate), with roasting conditions following the SCA protocol for sensory analysis. FTIR and NIR were used to analyze the ground and roasted coffee samples, and the data then submitted to statistical analysis to build up PLS models in order to confirm the quality classifications. The PLS models provided good predictability and classification of the samples. The models were able to accurately predict the scores of specialty coffees. In addition, the NIR spectra provided relevant information on chemical bonds that define specialty coffee in association with sensory aspects, such as the cleanliness of the beverage.

The potential for income improvement and biodiversity conservation via specialty coffee in Ethiopia.

The specialty coffee sector represents opportunities for coffee farmers and other actors due to increased value within the supply chain, driven by elevated consumer purchase prices. We investigated these relationships up to the export stage, as well as the potential for specialty coffee to improve stakeholder participation in biodiversity conservation. Household data was collected from a sample of 272 coffee farmers belonging to five primary cooperatives, in the heavily forested area of Yayu, in the Illubabor administrative zone of Oromia regional state in south-western Ethiopia, for the 2017/2018 harvest season. Qualitative and quantitative data, gathered between 2015 and 2019, from focus group discussions, was used to supplement the survey and to explain the empirical findings. We show that the income from coffee (and thus household income) can be increased, in some cases substantially, via participation in the specialty coffee market. The unit price for coffee was much higher than standard market prices and those including certification premiums. Whilst quality is a key factor for specialty coffee, income increases via the specialty market are caveat bound. In particular, there is a critical requirement for efficient and effective cooperative management, and we provide suggestions for improvements. In the long-term, more focus is needed to increase the financial and human capacities of Ethiopian coffee cooperatives, to make them more effective partners in the specialty coffee value chain. The high conversion rates from harvested to clean exportable specialty coffee (8:1, or higher) is identified as a major constraint on profitability. We show that specialty coffee can bring about positive environmental benefits. Elevating coffee prices and farm profitability to bring household income levels to around or above the global poverty line may ensure the continuation of forest coffee production, and thus the retention of forest. The increases in income via specialty coffee production, reported in the study, were achieved without increasing land use or the application of environmentally costly inputs. Moreover, analysis of satellite data shows that a large proportion of the coffee farms surveyed retain a level of forest cover and quality approaching primary (undisturbed) forest, and that the coffee production area at Yayu has not experienced any significant deforestation (since 2000). We recommend that coffee premiums linked to environmental benefit should demonstrate clearly defined and appropriate metrics, as we have demonstrated here for forest (canopy) quality and coverage (area).

Near-infrared spectroscopy and multivariate calibration as an alternative to the Agtron to predict roasting degrees in coffee beans and ground coffees.

Agtron method is widely used in the industry to determine roasting degrees in whole and ground coffee but it suffers from some inconveniences associated with unavailability of equipment, high cost, and lack of reproductive results. This study investigates the feasibility to determine roasting degrees in coffee beans and ground specialty coffees using near-infrared (NIR) spectroscopy combined with multivariate calibration based on partial least squares (PLS) regression. Representative data sets were considered to cover all Agtron roasting profiles for whole and ground coffees. Proper development of models with outlier evaluation and complete validation using parameters of merit such as accuracy, adjust, residual prediction deviation, linearity, analytical sensitivity, and limits of detection and quantification are presented to prove their performance. The results indicated that predictive chemometric models, for intact coffee beans and ground coffee, could be used in the coffee industry as an alternative to Agtron, thus digitalizing the roasting quality control.