Hydrophobic Multilayered PEG@PAN/MXene/PVDF@SiO2 Composite Film with Excellent Thermal Management and Electromagnetic Interference Shielding for Electronic Devices.

With the rapid development of electronic industry, it's pressing to develop multifunctional electromagnetic interference (EMI) shielding materials to ensure the stable operation of electronic devices. Herein, multilayered flexible PEG@PAN/MXene (Ti3C2Tx)/PVDF@SiO2 (PMF) composite film has been constructed from the level of microstructure design via coaxial electrospinning, coating spraying, and uniaxial electrospinning strategies. Benefiting from the effective encapsulation for PEG and high conductivity of MXene coating, PEG@PAN/MXene composite film with MXene coating loading density of 0.70 mg cm-2 exhibits high thermal energy storage density of 120.77 J g-1 and great EMI shielding performance (EMI SE of 34.409 dB and SSE of 49.086 dB cm3 g-1) in X-band (8-12 GHz). Therefore, this advanced composite film can not only help electronic devices prevent the influence of electromagnetic pollution in the X-band but also play an important role in electronic device thermal management. Additionally, the deposition of nano PVDF@SiO2 fibers (289 ± 128 nm) endowed the PMF composite film with great hydrophobic properties (water contact angle of 126.5°) to ensure the stable working of hydrophilic MXene coating, thereby breaks the limitation of humid application environments. The finding paves a new way for the development of novel multifunctional EMI shielding composite films for electronic devices.

Spray-lithography of hybrid graphene-perovskite paper-based photodetectors for sustainable electronics.

Paper is an ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems. When combined with nanomaterial-based devices, it can be harnessed for various Internet-of-Things applications, ranging from wearable electronics to smart packaging. However, paper remains a challenging substrate for electronics due to its rough and porous nature. In addition, the absence of established fabrication methods is impeding its utilization in wearable applications. Unlike other paper-based electronics with added layers, in this study, we present a scalable spray-lithography on a commercial paper substrate. We present a non-vacuum spray-lithography of chemical vapor deposition (CVD) single-layer graphene (SLG), carbon nanotubes (CNTs) and perovskite quantum dots (QDs) on a paper substrate. This approach combines the advantages of two large-area techniques: CVD and spray-coating. The first technique allows for the growth of SLG, while the second enables the spray coating of a mask to pattern CVD SLG, electrodes (CNTs), and photoactive (QDs) layers. We harness the advantages of perovskite QDs in photodetection, leveraging their strong absorption coefficients. Integrating them with the graphene enhances the photoconductive gain mechanism, leading to high external responsivity. The presented device shows high external responsivity of ∼520 A W-1at 405 nm at <1 V bias due to the photoconductive gain mechanism. The prepared paper-based photodetectors (PDs) achieve an external responsivity of 520 A W-1under 405 nm illumination at <1 V operating voltage. To the best of our knowledge, our devices have the highest external responsivity among paper-based PDs. By fabricating arrays of PDs on a paper substrate in the air, this work highlights the potential of this scalable approach for enabling ubiquitous electronics on paper.

Curcumin and Vitamin C dual release from Hydroxyapatite coated Ti6Al4V discs enhances in vitro biological properties.

Titanium alloys are widely used as implant materials due to their biocompatibility and superior mechanical properties for high-load-bearing applications. However, one of the major challenges is their inferior bioactivity and osseoconductivity. Hydroxyapatite is widely used as an alternative material for bone implants due to its compositional similarity to natural bone. In this study, hydroxyapatite is coated on Ti6Al4V discs to enhance its bioactivity. The coated discs are drop-casted with curcumin in the lower layer and vitamin C in the upper layer. This study aims to evaluate the effects of this dual drug delivery system on osteoblast cell proliferation, inhibition of osteoclastogenesis, chemo-preventive and infection control properties. The coating strength obtained is 22 ± 2 MPa. The release from the dual delivery system shows a 1.5-fold increase in osteoblast cell viability, a 1.5-fold reduction in osteoclast cell differentiation, a 2-fold decrease in osteosarcoma growth. The release of curcumin demonstrates a 94% antibacterial efficacy, while the release of vitamin C exhibits an efficacy of 98.6% aganist Staphylococcus aureus. This multifunctional system can be used as a potential implant for load-bearing applications.

Quality evaluation of strawberries coated with water-in-oil based emulsion using an advanced electrostatic spray coating system.

In this study, the impact of formulated emulsion was studied on strawberries which were coated using dip and electrostatic spray coating methods. The coated strawberries were kept at room temperature for a period of 12 days. A significant level of chargeability of w/o emulsion was achieved in terms of charge-to-mass ratio of 2.81 mC/kg at an applied high voltage of 2.0 kV, applied air pressure of 0.3 MPa, and liquid flow rate of 33.6 ml/min. The distance of 170 mm from the nozzle tip to Faraday cage was maintained during the measurements. As compared to uncoated and dip coated strawberries, the water-in-oil based electrostatically charged sprays considerably (p < 0.05) reduced the weight loss, decay rate, pH, titrable acidity, TSS, and antioxidant activity. In both the cases, i.e. strawberries coated with dip and electrostatic spray coating methods, the same weight loss was observed, however, there was a considerably less weight loss as compared to uncoated samples. The textures of the uncoated (9.02 N) and dip coated (12.58 N) samples were significantly different from the electrostatic spray coated (15.85 N) samples. Since, the coating formulation had no impact on the sensory attributes, the samples were considered as acceptable at the end of the storage. Furthermore, compared to uncoated, water-in-oil based electrostatically charged spray coating was more effective at delaying the decay by 12 days.

Cathodes Coating Layer with Li-Ion Diffusion Selectivity Employing Interactive Network of Metal-Organic Polyhedras for Li-Ion Batteries.

Surface modification of cathodes using Ni-rich coating layers prevents bulk and surface degradation for the stable operation of Li-ion batteries at high voltages. However, insulating and dense inorganic coating layers often impede charge transfer and ion diffusion kinetics. In this study, the fabrication of dual functional coating materials using metal-organic polyhedra (MOP) with 3D networks within microporous units of Li-ion batteries for surface stabilization and facile ion diffusion is proposed. Zr-based MOP is modified by introducing acyl groups as a chemical linkage (MOPAC), and MOPAC layers are homogenously coated by simple spray coating on the cathode. The coating allow the smooth transport of electrons and ions. MOPAC effectively suppress side reactions between the cathode and electrolyte and protect active materials against aggressive fluoride ions by forming a Li-ion selective passivation film. The MOPAC-coated Ni-rich layered cathode exhibited better cycle retention and enhanced kinetic properties than pristine and MOP-coated cathodes. Reduction of undesirable gas evolution on the cathode by MOPAC is also verified. Microporous MOPAC coating can simultaneously stabilize both the bulk and surface of the Ni-rich layered cathode and maintain good electrochemical reaction kinetics for high-performance Li-ion batteries.

Low-Cost ZnO Spray-Coated Optical Fiber Sensor for Detecting VOC Biomarkers of Diabetes.

A non-invasive optical fiber sensor for detecting volatile organic compounds (VOCs) as biomarkers of diabetes is proposed and experimentally demonstrated. It offers a low-cost and straightforward fabrication approach by implementing a one-step spray coating of a ZnO colloidal solution on a glass optical fiber. The structure of the optical fiber sensor is based on a single-mode fiber-coreless silica fiber-single-mode fiber (SMF-CSF-SMF) structure, where the CSF is the sensor region spliced between two SMFs. The ZnO layer of a higher refractive index coated over the sensing region improves the light interaction with the surrounding medium, leading to sensitivity enhancement. The optical properties, morphology, and elemental composition of the ZnO layer were analyzed. The sensing mechanism of the developed sensor is based on a wavelength interrogation technique showing wavelength shifts when the sensor is exposed to various VOC vapor concentration levels. Various concentrations of the three VOCs (including acetone, isopropanol, and ethanol) ranging from 20% to 100% were tested and analyzed. The sensor noticeably shows a significant response towards acetone vapor, with a better sensitivity of 0.162 nm/% vapor than for isopropanol (0.082 nm/% vapor) and ethanol (0.075 nm/% vapor) vapors. The high sensitivity and selectivity towards acetone, a common biomarker for diabetes, offers the potential for further development of this sensor as a smart healthcare system for monitoring diabetic conditions.

Electrochemical Properties of PEDOT:PSS/Graphene Conductive Layers in Artificial Sweat.

Electrodes based on PEDOT:PSS are gaining increasing importance as conductive electrodes and functional layers in various sensors and biosensors due to their easy processing and biocompatibility. This study investigates PEDOT:PSS/graphene layers deposited via spray coating on flexible PET substrates. The layers are characterized in terms of their morphology, roughness (via AFM and SEM), and electrochemical properties in artificial sweat using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The layers exhibit dominant capacitive behavior at low frequencies, with cut-off frequencies determined for thicker layers at 1 kHz. The equivalent circuit used to fit the EIS data reveals a resistance of about three orders of magnitude higher inside the layer compared to the charge transfer resistance at the solid/liquid interface. The capacitance values determined from the CV curves range from 54.3 to 122.0 mF m-2. After 500 CV cycles in a potential window of 1 V (from -0.3 to 0.7 V), capacitance retention for most layers is around 94%, with minimal surface changes being observed in the layers. The results suggest practical applications for PEDOT:PSS/graphene layers, both for high-frequency impedance measurements related to the functioning of individual organs and systems, such as impedance electrocardiography, impedance plethysmography, and respiratory monitoring, and as capacitive electrodes in the low-frequency range, realized as layered PEDOT:PSS/graphene conductive structures for biosignal recording.

Novel polypropylene-TiO2:Bi spherical floater for the efficient photocatalytic degradation of the recalcitrant 2,4,6-TCP herbicide.

In this work, spherical photocatalytic floaters were fabricated by depositing TiO2:Bi (TBi) particles on polypropylene (PP) spheres (recycled from beer cans). These particles were deposited on the sphere (TBi-sphere) by the spray coating technique and evaluated their performance for the photocatalytic degradation of 2,4,6-trichlorophenol (2,4,6-TCP) herbicide. SEM images demonstrated that the BTi powders consisted in conglomerated grains with sizes of 20-80 nm and the analysis by X-ray diffraction confirmed the presence of rutile and anatase phases in the BTi. The photocatalytic experiments showed that the TBi and TBi-sphere produced maximum degradation of 90 and 97% for 2,4,6-TCP, respectively, after 4 h under UV-Vis light. The photocatalytic powders/composites were reused 3 times and the loss of degradation efficiency was 3 and 16% for the TBi powder and TBi-sphere, respectively. This means that the TBi-sphere is more stable for the continuous degradation of the 2,4,6-TCP contaminant. The TiO2:Bi powder was compared with the commercial TiO2 (P25) and found that the TiO2:Bi powder had higher light absorption (≈42%) and higher surface area (≈105%) than the P25. Therefore, the degradation percentage for the 2,4,6-TCP was 52% higher in the sample doped with Bi. Also, scavenger experiments were carried out and found that the main oxidizing agents produced for the degradation of 2,4,6-TCP were •OH- radicals and •O2- anions. Other species such as h+ were also produced at lower amount. Hence, our results demonstrated that spherical/floatable photocatalytic composites are a viable option to remove herbicide residuals from the water, which is of interest in water-treatment-plants.

Ca-Doped Copper (I) Oxide Deposited via the Spray Coating Technique for Heterojunction Solar Cell Application.

In this report, the morphological, optical, electrical, and photovoltaic properties of copper oxide and calcium-doped copper oxide thin films produced via the spray coating method were studied. The thermal post treatment at 300 °C in an inert atmosphere allowed us to obtain a single phase of Cu2O with 21 Ωcm of resistivity (ρ). In this study, 1 wt%, 2 wt%, 3 wt%, 4 wt%, 5 wt%, and 10 wt% Ca admixtures with copper oxide were investigated. The determined optimal calcium dopant concentration was 4 wt%. XRD analysis was used to reveal the chemical composition of the produced layers. It was found that a calcium dopant does not change the layer composition but improves its electrical parameters. Based on UV-Vis spectra, the band gap energy and Urbach energy were calculated. The morphology of produced thin films was described as smooth and nanocrystalline, corresponding to a grain size calculated based on the Scherrer equation. Finally, it was shown that the developed protocol of low-resistivity copper oxide deposition via the spray coating technique can be successfully implemented in heterojunction solar cell production. The I-V parameters of Ag/n-type CzSi/REF:CuOx and 4Ca:CuOx/Carbon were collected, and the achieved efficiency was 2.38%.

[Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics].

OBJECTIVE: To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application. METHODS: Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05). RESULTS: The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 µm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 µm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05). CONCLUSION: The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.

Scalable Synthesis of Multi-Metal Electrocatalyst Powders and Electrodes and their Application for Oxygen Evolution and Water Splitting.

Multi-metal electrocatalysts provide nearly unlimited catalytic possibilities arising from synergistic element interactions. We propose a polymer/metal precursor spraying technique that can easily be adapted to produce a large variety of compositional different multi-metal catalyst materials. To demonstrate this, 11 catalysts were synthesized, characterized, and investigated for the oxygen evolution reaction (OER). Further investigation of the most active OER catalyst, namely CoNiFeMoCr, revealed a polycrystalline structure, and operando Raman measurements indicate that multiple active sites are participating in the reaction. Moreover, Ni foam-supported CoNiFeMoCr electrodes were developed and applied for water splitting in flow-through electrolysis cells with electrolyte gaps and in zero-gap membrane electrode assembly (MEA) configurations. The proposed alkaline MEA-type electrolyzers reached up to 3 A cm-2 , and 24 h measurements demonstrated no loss of current density of 1 A cm-2 .

Magnetically Driven Tunable 3D Structured Fe3 O4 Vertical Array for High-Performance Solar Steam Generation.

Structural design of the solar-absorbing layer has been considered as one of the most direct and effective approaches for improving the solar steam generation performance by maximizing the absorption of sunlight, but great challenges in manipulation simplification and structure controllability still remain. Herein, a polyester (PET) fabric covered with a vertically aligned 3D tower-like ferrosoferric oxide (Fe3 O4 ) array via a convenient magnetically driven spray-coating method is reported, and both the spatial density and height of the Fe3 O4 array are tunable upon spraying time. It shows an extremely high solar absorbance (98.6%) in the entire solar spectrum, which is superior to the corresponding 2D Fe3 O4 structure (91.1%). Combining the obtained 3D Fe3 O4 /PET with a yolk-shell hydrophobic/superhydrophilic modified melamine-formaldehyde (mMF) sponge, the carefully designed and fabricated 3D Fe3 O4 /PET-mMF evaporator can realize a high water evaporation rate of 1.59 kg m-2 h-1 under 1 kW m-2 solar illumination, outperforming most related solar steam generation systems. With the advantages of cost-effectiveness, high evaporation rate, reliable endurance, and structural controllability, this 3D structural design provides an avenue to build up high-performance solar energy-driven water steam generation systems.

In vivo and in vitro toxicity of a stainless-steel aerosol generated during thermal spray coating.

Thermal spray coating is an industrial process in which molten metal is sprayed at high velocity onto a surface as a protective coating. An automated electric arc wire thermal spray coating aerosol generator and inhalation exposure system was developed to simulate an occupational exposure and, using this system, male Sprague-Dawley rats were exposed to stainless steel PMET720 aerosols at 25 mg/m3 × 4 h/day × 9 day. Lung injury, inflammation, and cytokine alteration were determined. Resolution was assessed by evaluating these parameters at 1, 7, 14 and 28 d after exposure. The aerosols generated were also collected and characterized. Macrophages were exposed in vitro over a wide dose range (0-200 µg/ml) to determine cytotoxicity and to screen for known mechanisms of toxicity. Welding fumes were used as comparative particulate controls. In vivo lung damage, inflammation and alteration in cytokines were observed 1 day post exposure and this response resolved by day 7. Alveolar macrophages retained the particulates even after 28 day post-exposure. In line with the pulmonary toxicity findings, in vitro cytotoxicity and membrane damage in macrophages were observed only at the higher doses. Electron paramagnetic resonance showed in an acellular environment the particulate generated free radicals and a dose-dependent increase in intracellular oxidative stress and NF-kB/AP-1 activity was observed. PMET720 particles were internalized via clathrin and caveolar mediated endocytosis as well as actin-dependent pinocytosis/phagocytosis. The results suggest that compared to stainless steel welding fumes, the PMET 720 aerosols were not as overtly toxic, and the animals recovered from the acute pulmonary injury by 7 days.

Affordable Motion Tracking System for Intuitive Programming of Industrial Robots.

The paper deals with a lead-through method of programming for industrial robots. The goal is to automatically reproduce 6DoF trajectories of a tool wielded by a human operator demonstrating a motion task. We present a novel motion-tracking system built around the HTC Vive pose estimation system. Our solution allows complete automation of the robot teaching process. Specific algorithmic issues of system calibration and motion data post-processing are also discussed, constituting the paper's theoretical contribution. The motion tracking system is successfully deployed in a pilot application of robot-assisted spray painting.

Enhancement of Antiviral Effect of Plastic Film against SARS-CoV-2: Combining Nanomaterials and Nanopatterns with Scalability for Mass Manufacturing.

Direct contact with contaminated surfaces in frequently accessed areas is a confirmed transmission mode of SARS-CoV-2. To address this challenge, we have developed novel plastic films with enhanced effectiveness for deactivating the SARS-CoV-2 by means of nanomaterials combined with nanopatterns. Results prove that these functionalized films are able to deactivate SARS-CoV-2 by up to 2 orders of magnitude within the first hour compared to untreated films, thus reducing the likelihood of transmission. Nanopatterns can enhance the antiviral effectiveness by increasing the contact area between nanoparticles and virus. Significantly, the established process also considers the issue of scalability for mass manufacturing. A low-cost process for nanostructured antiviral films integrating ultrasonic atomization spray coating and thermal nanoimprinting lithography is proposed. A further in-depth investigation should consider the size, spacing, and shape of nanopillars, the type and concentration of nanoparticles, and the scale-up and integration of these processes with manufacturing for optimal antiviral effectiveness.

Spray Deposition Synthesis of Locally Ordered Mesoporous Polycrystalline Titania Films at Low Temperature.

A low-temperature spray deposition synthesis was developed to prepare locally hexagonally ordered mesoporous titania films with polycrystalline anatase pore walls in an evaporation-induced self-assembly process. The titania film preparation procedure is conducted completely at temperatures below 50 °C. The effects of spray time, film thickness, synthesis time prior to spray deposition, and aging time at high relative humidity after deposition on the atomic arrangement and the mesoorder of the mesoporous titania were studied. We find the crystallite size to depend on both the synthesis time and aging time of the films, where longer times result in larger crystallites. Using the photocatalytic activity of titania, the structure-directing agent is removed with UV radiation at 43-46 °C. The capability of the prepared films to remove the polymer template increased with longer synthesis and aging times due to the increased crystallinity, which increases the photocatalytic efficiency of the titania films. However, with increasingly longer times, the crystallites grow too large for the mesoorder of the pores to be maintained. This work shows that a scalable spray coating method can be used to prepare locally ordered mesoporous polycrystalline titania films by judiciously tuning the synthesis parameters.

In Situ Observation of Low-Power Nano-Synaptic Response in Graphene Oxide Using Conductive Atomic Force Microscopy.

Multiple studies have reported the observation of electro-synaptic response in different metal/insulator/metal devices. However, most of them analyzed large (>1 µm2 ) devices that do not meet the integration density required by industry (1010  devices/mm2 ). Some studies emploied a scanning tunneling microscope (STM) to explore nano-synaptic response in different materials, but in this setup there is a nanogap between the insulator and one of the metallic electrodes (i.e., the STM tip), not present in real devices. Here, it is demonstrated how to use conductive atomic force microscopy to explore the presence and quality of nano-synaptic response in confined areas <50 nm2 . Graphene oxide (GO) is selected due to its easy fabrication. Metal/GO/metal nano-synapses exhibit potentiation and paired pulse facilitation with low write current levels <1 µA (i.e., power consumption ≈3 µW), controllable excitatory post-synaptic currents, and long-term potentiation and depression. The results provide a new method to explore nano-synaptic plasticity at the nanoscale, and point to GO as an important candidate for the fabrication of ultrasmall (<50 nm2 ) electronic synapses fulfilling the integration density requirements of neuromorphic systems.

Absolute and Fast Removal of Viruses and Bacteria from Water by Spraying-Assembled Carbon-Nanotube Membranes.

Membrane separation is able to efficiently remove pathogens like bacteria and viruses from water based on size exclusion. However, absolute and fast removal of pathogens requires highly permeable but selective membranes. Herein, we report the preparation of such advanced membranes using carbon nanotubes (CNTs) as one-dimensional building blocks. We first disperse CNTs with the help of an amphiphilic block copolymer, poly(2-dimethylaminoethyl methacrylate)-block-polystyrene (PDMAEMA-b-PS, abbreviated as BCP). The PS blocks adsorb on the surface of CNTs via the π-π interaction, while the PDMAEMA blocks are solvated, thus forming homogeneous and stable CNT dispersions. We then spray the CNT dispersions on porous substrates, producing composite membranes with assembled CNT layers as the selective layers. We demonstrate that the optimized membrane shows 100% rejection to phage viruses and bacteria (Escherichia coli) while giving a water permeance up to ∼3300 L m-2 h-1 bar-1. The performance of the resultant BCP/CNT membrane outperforms that of state-of-the-art membranes and commercial membranes. The BCP/CNT membrane can be used for multiple runs and regenerated by water rinsing. Membrane modules assembled from large-area membrane sheets sustain the capability of absolute and fast removal of viruses and bacteria.

Production of photochromic nanocomposite film via spray-coating of rare-earth strontium aluminate for anti-counterfeit applications.

New photochromic film was developed toward the preparation of anti-counterfeiting documents utilizing inorganic/organic nanocomposite enclosing a photoluminescent inorganic pigment and a polyacrylic binder polymer. To generate a translucent film from pigment/polyacrylic nanocomposite, the phosphorescent strontium aluminum oxide pigment should be well-dispersed in the solution of the polyacrylic-based binder without agglomeration. The photochromic nanocomposite was applied efficiently onto commercial cellulose paper documents utilizing the effective and economical spray-coating technology followed with thermofixation. A homogeneous photochromic film was immobilized onto cellulose paper surface to introduce a transparent film changing to greenish-yellow upon exposure to ultraviolet light as depicted by CIE coloration measurements. The photochromic effect was monitored at lowest pigment concentration (0.25 wt%). The spray-coated paper documents exhibit two absorbance bands at 256 and 358 nm, and two fluorescence peaks at 433 and 511 nm. The morphologies of the spray-coated documents were explored. The spray-coated paper sheets showed a reversible photochromic effect without fatigue under ultraviolet irradiation. The rheology of the produced photochromic composites as well as the mechanical properties and photostability of the spray-coated documents were studied.

Development of photoluminescent, superhydrophobic, and electrically conductive cotton fibres.

A simple method for the preparation of multifunctional nanocomposite was developed towards the production of water-repellent, electrically conductive, and photoluminescent film onto cotton fibres. The nanocomposite was composed of lanthanide-doped strontium aluminium oxide and silicon rubber dispersed in petroleum ether. The electrically conductive fabric was woven from nickel strips twisted with cotton filaments as core yarns, which were wrapped with pure cotton yarns. The nanoparticles (NPs) of lanthanide-doped strontium aluminium oxide were mixed with environmentally friendly room-temperature vulcanizing silicon rubber (RTV-SR) dissolved in petroleum ether to give the silicon rubber/strontium aluminate nanocomposites. The produced nanocomposites were applied onto electrically conductive cotton/nickel fibres using spray-coating technology. The surface of the cotton/nickel fibres showed different hierarchical morphologies depending on the total content of the silicon rubber. Additionally, the superhydrophobic effect was found to be improved upon increasing the total content of the luminescence pigment NPs. The morphologies of the prepared phosphor NPs were determined using transmission electron microscopy (TEM). The generated transparent luminescence film demonstrated an absorbance peak at 358 nm and an emission peak at 515 nm. Photoluminescence of cotton fibres was monitored with the generation of different colours, including grey, green-yellow, bright white, and turquoise shades as recognized using CIE Laboratory colorimetric parameters. The emission, excitation, lifetime, and decay time spectra of the phosphorescent spray-coated cotton samples were studied. The surface morphologies and chemical compositions of the spray-coated cotton/nickel were investigated using wavelength-dispersive X-ray fluorescence (WD-XRF), scanning electron microscope (SEM), Fourier-transform infrared spectra (FTIR), and energy-dispersive X-ray analyzer (EDAX). The superhydrophobic effects were characterized by measuring static water contact angle. The comfort characteristics of the treated cotton/nickel substrates were assessed by investigating their air permeability and stiffness. The treated cotton/nickel fabrics also displayed an antimicrobial activity. The results displayed water repellence with high electrical conductivity and photoluminescence properties.