Polyhydroxyalkanoate recovery overview: properties, characterizations, and extraction strategies.

Due to their excellent properties, polyhydroxyalkanoates are gaining increasing recognition in the biodegradable polymer market. These biogenic polyesters are characterized by high biodegradability in multiple environments, overcoming the limitation of composting plants only and their versatility in production. The most consolidated techniques in the literature or the reference legislation for the physical, chemical and mechanical characterisation of the final product are reported since its usability on the market is still linked to its quality, including the biodegradability certificate. This versatility makes polyhydroxyalkanoates a promising prospect with the potential to replace fossil-based thermoplastics sustainably. This review analyses and compares the physical, chemical and mechanical properties of poly-ß-hydroxybutyrate and poly-ß-hydroxybutyrate-co-ß-hydroxyvalerate, indicating their current limitations and strengths. In particular, the copolymer is characterised by better performance in terms of crystallinity, hardness and workability. However, the knowledge in this area is still in its infancy, and the selling prices are too high (9-18 $ kg-1). An analysis of the main extraction techniques, established and in development, is also included. Solvent extraction is currently the most widely used method due to its efficiency and final product quality. In this context, the extraction phase of the biopolymer production process remains a major challenge due to its high costs and the need to use non-halogenated toxic solvents to improve the production of good-quality bioplastics. The review also discusses all fundamental parameters for optimising the process, such as solubility and temperature.

Dynamic Li+ Capture through Ligand-Chain Interaction for the Regeneration of Depleted LiFePO4 Cathode.

After application in electric vehicles, spent LiFePO4 (LFP) batteries are typically decommissioned. Traditional recycling methods face economic and environmental constraints. Therefore, direct regeneration has emerged as a promising alternative. However, irreversible phase changes can significantly hinder the efficiency of the regeneration process owing to structural degradation. Moreover, improper storage and treatment practices can lead to metamorphism, further complicating the regeneration process. In this study, a sustainable recovery method is proposed for the electrochemical repair of LFP batteries. A ligand-chain Zn-complex (ZnDEA) is utilized as a structural regulator, with its ─NH─ group alternatingly facilitating the binding of preferential transition metal ions (Fe3+ during charging and Zn2+ during discharging). This dynamic coordination ability helps to modulate volume changes within the recovered LFP framework. Consequently, the recovered LFP framework can store more Li-ions, enhance phase transition reversibility between LFP and FePO4 (FP), modify the initial Coulombic efficiency, and reduce polarization voltage differences. The recovered LFP cells exhibit excellent capacity retention of 96.30% after 1500 cycles at 2 C. The ligand chain repair mechanism promotes structural evolution to facilitate ion migration, providing valuable insights into the targeted ion compensation for environmentally friendly recycling in practical applications.

Recovery of copper and silver from industrial e-waste leached solutions using sustainable liquid membrane technology: a review.

Waste electrical and electronic equipment or e-waste has recently emerged as a significant global concern. This waste contains various valuable metals, and via recycling, it could become a sustainable resource of metals (viz. copper, silver, gold, and others) while reducing reliance on virgin mining. Copper and silver with their superior electrical and thermal conductivity have been reviewed due to their high demand. Recovering these metals will be beneficial to attain the current needs. Liquid membrane technology has appeared as a viable option for treating e-waste from various industries as a simultaneous extraction and stripping process. It also includes extensive research on biotechnology, chemical and pharmaceutical, environmental engineering, pulp and paper, textile, food processing, and wastewater treatment. The success of this process depends more on the selection of organic and stripping phases. In this review, the use of liquid membrane technology in treating/recovering copper and silver from industrial e-waste leached solutions was highlighted. It also assembles critical information on the organic phase (carrier and diluent) and stripping phase in liquid membrane formulation for selective copper and silver. In addition, the utilization of green diluent, ionic liquids, and synergist carrier was also included since it gained prominence attention latterly. The future prospects and challenges of this technology were also discussed to ensure the industrialization of technology. Herein, a potential process flowchart for the valorization of e-waste is also proposed.

Utilization of tofu processing wastewater as a source of the bioactive peptide lunasin.

The goal of our study was to design a simple and feasible method to obtain lunasin, a naturally-occurring bioactive peptide, from tofu whey wastewater. A combination of alcoholic precipitation of high-molecular weight proteins from the whey, isoelectric precipitation of lunasin enriched material, and purification via gel filtration chromatography was selected as the best approach using tofu whey prepared at the laboratory scale. This process was applied to tofu whey produced by a local tofu factory and 773 mg of 80% purity lunasin was obtained per kg of dry tofu whey. Significant reduction of nitric oxide, and pro-inflammatory cytokines TNF-α and IL-6 over lipopolysaccharide activated murine macrophages demonstrate its biological activity. Our three-step process is not only simpler and faster than the previously reported methods to obtain lunasin but provides a sustainable approach for the valorization of a waste product, promoting the better utilization of soybean nutrients and active compounds.

Enhancing Energy Recovery in Form of Biogas, from Vegetable and Fruit Wholesale Markets By-Products and Wastes, with Pretreatments.

Residues and by-products from vegetables and fruit wholesale markets are suitable for recovery in the form of energy through anaerobic digestion, allowing waste recovery and introducing them into the circular economy. This suitability is due to their composition, structural characteristics, and to the biogas generation process, which is stable and without inhibition. However, it has been observed that the proportion of methane and the level of degradation of the substrate is low. It is decided to study whether the effect of pretreatments on the substrate is beneficial. Freezing, ultrafreezing and lyophilization pretreatments are studied. A characterization of the substrates has been performed, the route of action of pretreatment determined, and the digestion process studied to calculate the generation of biogas, methane, hydrogen and the proportions among these. Also, a complete analysis of the process has been performed by processing the data with mathematical and statistical methods to obtain disintegration constants and levels of degradation. It has been observed that the three pretreatments have positive effects, when increasing the solubility of the substrate, increasing porosity, and improving the accessibility of microorganisms to the substrate. Generation of gases are greatly increased, reaching a methane enrichment of 59.751%. Freezing seems to be the best pretreatment, as it increases the biodegradation level, the speed of the process and the disintegration constant by 306%.

Redefining Therapeutic Outcomes of Depression Treatment.

Responses to evidence-based interventions for depression are divergent: Some patients benefit more than others during treatment and some do not benefit at all or even deteriorate. Tailoring interventions to the individual may improve outcomes. However, such personalization of evidence-based treatment in depression requires investigation of individual outcomes and the individual trajectories towards these outcomes. This theoretical paper provides a critical reflection on individual outcomes of depression treatment. First, it is argued that outcomes should be broadened, from a focus on mainly depressive symptomatology to recovery in different domains. It is acknowledged that recovery from depression reflects a personal journey that differs from person to person. Second, outcome measures should be lengthened beyond the acute treatment phase, taking a lifetime perspective on depression. The challenge then is to discover which trajectories of what measures during what interventions result in personalized sustainable recovery and for whom. Routine outcome monitoring systems may be used to inform this quest towards assessment of personalized sustainable therapeutic outcomes. Adaptations to broaden and lengthen measurements in routine outcome monitoring systems are proposed to identify predictors of personalized sustainable recovery. Routine outcome monitoring systems may eventually be used to implement personalized treatments for depression that result in personalized sustainable recovery.