Investigation of antimicrobial and anti-cancer activity of thermally sensitive SnO2 nanostructures with green-synthesized cauliflower morphology at ambient weather conditions.

A tin oxide (SnO2) nanostructure was prepared using Matricaria recutita leaf extract to investigate its anticancer activity against SK-MEL-28 cells. The tetragonal crystal structure of tin oxide nanoparticles with an average crystal size of 27 nm was confirmed by X-ray diffraction (XRD) analysis. The tetragonal crystal structure of the tin oxide nanoparticles, with an average crystallite size of 27 nm, was confirmed by XRD an absorbance peak at 365 nm was identified by UV-visible spectroscopy analysis as belonging to the bio-mediated synthesis of SnO2 nanoparticles. The SnO2 NPs are capped and stabilized with diverse functional groups derived from bioactive molecules, including aldehydes, benzene rings, amines, alcohols, and carbonyl stretch protein molecules. Fourier transform infrared spectroscopy (FTIR) analysis validated the presence of these capping and stabilizing chemical bonds. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies revealed the cauliflower-shaped morphology of the SnO2 nanoparticles with an average particle size of 28 nm. The antimicrobial activity of both prepared and encapsulated samples confirmed their biological activities. Furthermore, both prepared and encapsulated tin oxide samples exhibited excellent anticancer activity against SK-MEL-28 human cancer cells. The present study introduces a reliable and uncomplicated approach to produce SnO2 nanoparticles and demonstrates their effectiveness in various applications, including cancer therapy, drug administration, and disinfectant.

Overcoming the Trade-Off between Optical Transmittance and Areal Capacitance of Transparent Supercapacitors for Practical Application.

It is substantially challenging for transition metal oxide nanoparticle (NP)-based electrodes for supercapacitors to achieve high transparency and large capacity simultaneously due to the inherent trade-off between optical transmittance (T) and areal capacitance (CA ). This study demonstrates how this trade-off limitation can be overcome by replacing some electrode NPs with transparent tin oxide (SnO2 ) NPs. Although SnO2 NPs are non-capacitive, they provide effective paths for charge transport, which simultaneously increase the CA and T550nm of the manganese oxide (Mn3 O4 ) NP electrode from 11.7 to 13.4 mF cm-2 and 82.1% to 87.4%, respectively, when 25 wt% of Mn3 O4 are replaced by SnO2 . The obtained CA values at a given T are higher than those of the transparent electrodes previously reported. An energy storage window fabricated using the mixed-NP electrodes exhibits the highest energy density among transparent supercapacitors previously reported. The improved energy density enables the window to operate various electronic devices for a considerable amount of time, demonstrating its applicability in constructing a reliable and space-efficient building-integrated power supply system.

Visible Light Driven Ultrasensitive and Selective NO2 Detection in Tin Oxide Nanoparticles with Sulfur Doping Assisted by l-Cysteine.

In the pandemic era, the development of high-performance indoor air quality monitoring sensors has become more critical than ever. NO2 is one of the most toxic gases in daily life, which induces severe respiratory diseases. Thus, the real-time monitoring of low concentrations of NO2 is highly required. Herein, a visible light-driven ultrasensitive and selective chemoresistive NO2 sensor is presented based on sulfur-doped SnO2 nanoparticles. Sulfur-doped SnO2 nanoparticles are synthesized by incorporating l-cysteine as a sulfur doping agent, which also increases the surface area. The cationic and anionic doping of sulfur induces the formation of intermediate states in the band gap, highly contributing to the substantial enhancement of gas sensing performance under visible light illumination. Extraordinary gas sensing performances such as the gas response of 418 to 5 ppm of NO2 and a detection limit of 0.9 ppt are achieved under blue light illumination. Even under red light illumination, sulfur-doped SnO2 nanoparticles exhibit stable gas sensing. The endurance to humidity and long-term stability of the sensor are outstanding, which amplify the capability as an indoor air quality monitoring sensor. Overall, this study suggests an innovative strategy for developing the next generation of electronic noses.

N-acetylcysteine alleviates pulmonary alveolar proteinosis induced by indium-tin oxide nanoparticles in male rats: involvement of the NF-κB signaling pathway.

Indium-tin oxide (ITO) was previously found to have a toxic effect on lung tissues, and oxidative stress and the inflammatory response are two important mechanisms of ITO­induced lung injury. N-acetylcysteine (NAC) has been found to exhibit antioxidant and anti­inflammatory properties. The current study aimed to evaluate the possible protective effects of NAC against ITO nanoparticle (Nano-ITO)-induced pulmonary alveolar proteinosis (PAP) in adult male Sprague-Dawley rats, especially via modulation of nuclear factor-kappa B (NF-κB) signaling. For this purpose, 50 rats were randomly allocated into five groups (10 rats each) as follows: (1) control group; (2) saline group; (3) NAC (200 mg/kg) group; (4) PAP model group receiving a repeated intratracheal dose of Nano-ITO (6 mg/kg); and (5) PAP model+NF-κB inhibitor (NAC) group pre-treated intraperitoneally with NAC (200 mg/kg) twice per week before the administration of an intratracheal dose of Nano-ITO (6 mg/kg). Rats were then euthanized under anesthesia, and their lungs were removed for histopathological and biochemical investigations. A 6 mg/kg dose of Nano-ITO markedly altered the levels of some oxidative stress biomarkers. The histological examination of Nano-ITO-exposed rats demonstrated diffused alveolar damage that involved PAP, cholesterol crystals, alveolar fibrosis, pulmonary fibrosis, and alveolar emphysema. The immunohistochemical results of Nano-ITO-exposed rats revealed strongly positive NF-κB p65 and inhibitory kappa B kinase (IKK)-ß and weakly positive inhibitor of kappa-B subunit alpha (IκB-α) staining reactivity in the nuclei of cells lining the epithelium of the bronchioles and alveoli. Moreover, Nano-ITO activated the NF-κB pathway. However, pre-treatment with NAC significantly attenuated Nano-ITO-evoked alterations in the previously mentioned parameters, highlighting their antioxidant, anti-inflammatory, and anti-apoptotic potential. The results indicated that the degree of pulmonary fibrosis and proteinosis in the NAC­treated group was improved compared with that in the Nano-ITO-induced PAP model group. The level of malondialdehyde was also decreased overall in the NAC-treated group compared with that in the Nano-ITO-induced model group, indicating that the pulmonary fibrosis degree and oxidation levels were decreased. The present study also demonstrated that NAC increased the activity of antioxidant enzyme superoxide dismutase and total antioxidant capacity, indicating that it could alleviate oxidative stress in the lung tissue of Nano-ITO­exposed rats. In addition, NAC reduced the production of pro­inflammatory cytokines interleukin (IL)­1ß, IL­6, and tumor necrosis factor (TNF)­α, and increased the levels of anti­inflammatory factor IL­10. The current study demonstrated that NAC can effectively attenuate Nano-ITO­induced lung injury by reducing oxidative damage and the inflammatory response.

Photoinduced-reset and multilevel storage transistor memories based on antimony-doped tin oxide nanoparticles floating gate.

Recently, antimony-doped tin oxide nanoparticles (ATO NPs) have been widely used in the fields of electronics, photonics, photovoltaics, sensing, and other fields because of their good conductivity, easy synthesis, excellent chemical stability, high mechanical strength, good dispersion and low cost. Herein, for the first time, a novel nonvolatile transistor memory device is fabricated using ATO NPs as charge trapping sites to enhance the memory performance. The resulting organic nano-floating gate memory (NFGM) device exhibits outstanding memory properties, including tremendous memory window (∼85 V), superhigh memory on/off ratio (∼109), long data retention (over 10 years) and eminent multilevel storage behavior, which are among the optimal performances in NFGM devices based on organic field effect transistors. Additionally, the device displays photoinduced-reset characteristic with low energy consumption erasing operation. This study provides novel avenues for the manufacture of simple and low-cost data storage devices with outstanding memory performance, multilevel storage behavior and suitability as platforms for integrated circuits.

Layer-by-Layer Assembled Oxide Nanoparticle Electrodes with High Transparency, Electrical Conductivity, and Electrochemical Activity by Reducing Organic Linker-Induced Oxygen Vacancies.

Solution-processable transparent conducting oxide (TCO) nanoparticle (NP)-based electrodes are limited by their low electrical conductivity, which originates from the low level of oxygen vacancies within NPs and the contact resistance between neighboring NPs. Additionally, these electrodes suffer from the troublesome trade-off between electrical conductivity and optical transmittance and the restricted shape of substrates (i.e., only flat substrates). An oxygen-vacancy-controlled indium tin oxide (ITO) NP-based electrode is introduced using carbon-free molecular linkers with strong chemically reducing properties. Specifically, ITO NPs are layer-by-layer assembled with extremely small hydrazine monohydrate linkers composed of two amine groups, followed by thermal annealing. This approach markedly improves the electrical conductivity of ITO NP-based electrodes by significantly increasing the level of oxygen vacancies and decreasing the interparticle distance (i.e., contact resistance) without sacrificing optical transmittance. The prepared electrodes surpass the optical/electrical performance of TCO NP-based electrodes reported to date. Additionally, the nanostructured ITO NP films can be applied to more complex geometric substrates beyond flat substrates, and furthermore exhibit a prominent electrochemical activity. This approach can provide an important basis for developing a wide range of highly functional transparent conducting electrodes.

Superwettability Strategy: 1D Assembly of Binary Nanoparticles as Gas Sensors.

Binary 1D nanowires consisting of both SnO2 nanoparticles and Au nanorods are fabricated through a "substrate-particle solution template" assembling method, which shows highly enhanced gas sensitivity toward acetone under ambient conditions.

Understanding Macrophage Interaction with Antimony-Doped Tin Oxide Plasmonic Nanoparticles.

Antimony-doped tin oxide nanoparticles (ATO NPs) have emerged as a promising tool in biomedical applications, namely robust photothermal effects upon near-infrared (NIR) light exposure, enabling controlled thermal dynamics to induce spatial cell death. This study investigated the interplay between ATO NPs and macrophages, understanding cellular uptake and cytokine release. ATO NPs demonstrated biocompatibility with no impact on macrophage viability and cytokine secretion. These findings highlight the potential of ATO NPs for inducing targeted cell death in cancer treatments, leveraging their feasibility, unique NIR properties, and safe interactions with immune cells. ATO NPs offer a transformative platform with significant potential for future biomedical applications by combining photothermal capabilities and biocompatibility.

Acute Aquatic Toxicity to Zebrafish and Bioaccumulation in Marine Mussels of Antimony Tin Oxide Nanoparticles.

Antimony tin oxide (Sb2O5/SnO2) is effective in the absorption of infrared radiation for applications, such as skylights. As a nanoparticle (NP), it can be incorporated into films or sheets providing infrared radiation attenuation while allowing for a transparent final product. The acute toxicity exerted by commercial Sb2O5/SnO2 (ATO) NPs was studied in adults and embryos of zebrafish (Danio rerio). Our results suggest that these NPs do not induce an acute toxicity in zebrafish, either adults or embryos. However, some sub-lethal parameters were altered: heart rate and spontaneous movements. Finally, the possible bioaccumulation of these NPs in the aquacultured marine mussel Mytilus sp. was studied. A quantitative analysis was performed using single particle inductively coupled plasma mass spectrometry (sp-ICP-MS). The results indicated that, despite being scarce (2.31 × 106 ± 9.05 × 105 NPs/g), there is some accumulation of the ATO NPs in the mussel. In conclusion, commercial ATO NPs seem to be quite innocuous to aquatic organisms; however, the fact that some of the developmental parameters in zebrafish embryos are altered should be considered for further investigation. More in-depth analysis of these NPs transformations in the digestive tract of humans is needed to assess whether their accumulation in mussels presents an actual risk to humans.

In vitro inhibition of biofilm and virulence factor production in azole-resistant strains of Candida albicans isolated from diabetic foot by Artemisia vulgaris stabilized tin (IV) oxide nanoparticles.

The advent of nanotechnology has been instrumental in the development of new drugs with novel targets. Recently, metallic nanoparticles have emerged as potential candidates to combat the threat of drug-resistant infections. Diabetic foot ulcers (DFUs) are one of the dreadful complications of diabetes mellitus due to the colonization of numerous drug-resistant pathogenic microbes leading to biofilm formation. Biofilms are difficult to treat due to limited penetration and non-specificity of drugs. Therefore, in the current investigation, SnO2 nanoparticles were biosynthesized using Artemisia vulgaris (AvTO-NPs) as a stabilizing agent and were characterized using ultraviolet-visible (UV-vis) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). Furthermore, the efficacy of AvTO-NPs against biofilms and virulence factors of drug-resistant Candida albicans strains isolated from DFUs was assessed. AvTO-NPs displayed minimum inhibitory concentrations (MICs) ranging from 1 mg/mL to 2 mg/mL against four strains of C. albicans. AvTO-NPs significantly inhibited biofilm formation by 54.8%-87%, germ tube formation by 72%-90%, cell surface hydrophobicity by 68.2%-82.8%, and exopolysaccharide (EPS) production by 69%-86.3% in the test strains at respective 1/2xMIC. Biosynthesized NPs were effective in disrupting established mature biofilms of test strains significantly. Elevated levels of reactive oxygen species (ROS) generation in the AvTO-NPs-treated C. albicans could be the possible cause of cell death leading to biofilm inhibition. The useful insights of the present study could be exploited in the current line of treatment to mitigate the threat of biofilm-related persistent DFUs and expedite wound healing.

Pluronic-F-127-Passivated SnO2 Nanoparticles Derived by Using Polygonum cuspidatum Root Extract: Synthesis, Characterization, and Anticancer Properties.

Nanotechnology has emerged as the most popular research topic with revolutionary applications across all scientific disciplines. Tin oxide (SnO2) has been gaining considerable attention lately owing to its intriguing features, which can be enhanced by its synthesis in the nanoscale range. The establishment of a cost-efficient and ecologically friendly procedure for its production is the result of growing concerns about human well-being. The novelty and significance of this study lie in the fact that the synthesized SnO2 nanoparticles have been tailored to have specific properties, such as size and morphology. These properties are crucial for their applications. Moreover, this study provides insights into the synthesis process of SnO2 nanoparticles, which can be useful for developing efficient and cost-effective methods for large-scale production. In the current study, green Pluronic-coated SnO2 nanoparticles (NPs) utilizing the root extracts of Polygonum cuspidatum have been formulated and characterized by several methods such as UV-visible, Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDAX), transmission electron microscope (TEM), field emission-scanning electron microscope (FE-SEM), X-ray diffraction (XRD), photoluminescence (PL), and dynamic light scattering (DLS) studies. The crystallite size of SnO2 NPs was estimated to be 45 nm, and a tetragonal rutile-type crystalline structure was observed. FESEM analysis validated the NPs' spherical structure. The cytotoxic potential of the NPs against HepG2 cells was assessed using the in vitro MTT assay. The apoptotic efficiency of the NPs was evaluated using a dual-staining approach. The NPs revealed substantial cytotoxic effects against HepG2 cells but failed to exhibit cytotoxicity in different liver cell lines. Furthermore, dual staining and flow cytometry studies revealed higher apoptosis in NP-treated HepG2 cells. Nanoparticle treatment also inhibited the cell cycle at G0/G1 stage. It increased oxidative stress and promoted apoptosis by encouraging pro-apoptotic protein expression in HepG2 cells. NP treatment effectively blocked the PI3K/Akt/mTOR axis in HepG2 cells. Thus, green Pluronic-F-127-coated SnO2 NPs exhibits enormous efficiency to be utilized as an talented anticancer agent.

Pulmonary and Systemic Toxicity in a Rat Model of Pulmonary Alveolar Proteinosis Induced by Indium-Tin Oxide Nanoparticles.

PURPOSE: The main objective of this study was to clarify the biodistribution and in vivo toxicological effects of indium-tin oxide nanoparticles (Nano-ITO) in male rats. METHODS: Dose-response (three divided doses) and time-course studies (six exposure durations) were performed to examine Nano­ITO-induced pulmonary and systemic toxicity. At the end of the experiment, hematology and serum biochemical parameters were determined, and cytokines levels and oxidative stress were analyzed in the bronchoalveolar lavage fluid. In addition, indium biodistribution following Nano­ITO exposure was determined using inductively coupled plasma mass spectrometer to measure indium concentration in the lung, spleen, brain, liver, kidney, and testis. Rat lung tissues were also harvested for staining with hematoxylin and eosin, periodic acid Schiff stain, Masson's trichrome, and Sirius red. RESULTS: Relative lung weights were significantly increased in all Nano-ITO-exposed groups. All organs exhibited a statistically significant difference in indium levels. Rat exposure to Nano­ITO resulted in a dose-response increase in acute systemic inflammation and injury. BALF analysis revealed significantly elevated levels of lung oxidative stress, pulmonary injury, and inflammatory markers across most groups. Serum biochemistry results showed that Nano-ITO could affect the liver and renal functions of rats when exposed for 3 days. Compared with the control group, significant inflammatory responses or pathological changes were observed in the liver, kidney, and testis of rats at different sampling times and three doses examined. Histopathologically, foci of slight-to-severe pulmonary inflammatory response along with acute inflammatory, pulmonary fibrosis and alveolar proteinosis were detected, and the severity of these lesions worsened in a dose- and time-dependent manner. DISCUSSION: These findings provide novel evidence that enhanced progressive massive pulmonary fibrosis, diffuse interstitial fibrosis, and collagen accumulation play a role in the development of pulmonary alveolar proteinosis following Nano-ITO exposure.

Tin oxide nanoparticles trigger the formation of amyloid ß oligomers/protofibrils and underlying neurotoxicity as a marker of Alzheimer's diseases.

Alzheimer's disease (AD) is known as one of the most common forms of dementia, and oligomerization of amyloid ß (Aß42) peptides can result in the onset of AD. Tin oxide nanoparticles (SnO2 NPs) showed several applications in biomedical fields can trigger unwanted interaction with proteins and inducing protein aggregation. Herein, we synthesized SnO2 NPs via the hydrothermal method and characterized by UV-visible, XRD, FTIR, TEM, and DLS techniques. Afterward, the formation of Aß42 amyloid oligomers/protofibrils treated alone and with SnO2 NPs was explored by ThT and Nile red fluorescence and CD spectroscopic methods along with TEM imaging. The neurotoxicity of different spices of Aß42 samples against PC-12 cells was then explored by MTT and caspase-3 activity assays. The characterization of SnO2 NPs confirmed the successful synthesis of crystalline NPs (20-30 nm). Different biophysical and cellular analyses indicated that SnO2 NPs accelerated Aß42 fibrillogenesis and promoted amyloid oligomers/protofibrils cytotoxicity. As compared to the Aß42 samples grown alone, the ThT and ANS fluorescence intensity along with ellipticity results indicated the promotory effect of SnO2 NPs on the formation of oligomers/protofibrils. Also, the cellular results showed that the treated Aß42 samples with SnO2 NPs further reduced cell viability through activation of caspase-3. In conclusion, SnO2 NPs greatly accelerate the fibrillation of Aß42 peptides and lead to the formation of more toxic species. The present data may offer further warrants into nano-based systems for biomedical applications in the central nervous system.

An improved electrochemical sensor based on triton X-100 functionalized SnO2 nanoparticles for ultrasensitive determination of cadmium.

The drastic increases in the concentration of heavy metals ions in the environment have become a serious concern for a number of years. Heavy metals pose serious impacts on human and aquatic life and cause severe health hazards. Amongst heavy metals, cadmium is known for its lethal effects on human health as it easily reacts with enzymes and creates free radicals in the biological system that causes carcinogenicity and other serious diseases. Thus, to tackle this challenge, TX-100 SnO2 nanoparticles based chemically modified sensor is introduced to assess the quantity of Cd+2 in the water system. The engineered SnO2 nanoparticles were electrochemically characterized through cyclic voltammetry and electrochemical impedance spectroscopy to ensure the better charge transfer kinetics and electrocatalytic properties of fabricated sensors. Under the optimized conditions e.g., scan rate 80 mV/s, PBS electrolyte pH 7, and potential window (-0.2 to -1.4 V), the engineered TX-100/SnO2/GCE-based sensor manifested a phenomenal response for cadmium ions in water media. The LOD and LOQ of developed TX-100/SnO2/GCE were calculated in the nanomolar range as 0.0084 nM and 0.27 nM. The recovery values of the proposed method for Cd+2 were found in an acceptable limit that witnesses the effectiveness of the fabricated sensor. Moreover, the excellent stability and anti-interference behavior of the sensor highlights its dynamic profile to be commercially utilized for the determination of Cd+2 ions in water bodies.

Pathological Comparison of Rat Pulmonary Models Induced by Silica Nanoparticles and Indium-Tin Oxide Nanoparticles.

Purpose: The objective of this study was to evaluate and compare the histopathological implications of silica nanoparticles (Nano-SiO2) and indium-tin oxide nanoparticles (Nano-ITO), in vivo. Methods: Male Sprague-Dawley rats were exposed to Nano-SiO2 (50 mg/kg) and Nano-ITO (6 mg/kg) by a single intratracheal instillation, respectively. Broncho-alveolar lavage fluid (BALF) and lung tissue were obtained at 7, 14, 28, and 56 days post exposure for analysis of BALF inflammatory factors, total protein, and for lung tissue pathology. Histopathological and ultrastructural change in lungs were investigated by hematoxylin and eosin, Masson's trichrome, sirius red staining, periodic acid Schiff stain, and transmission electron microscopy. The expression of SP-A, collagen type I and III in lung tissue was determined by immunohistochemistry and ELISA. Results: The rats in both models exhibited obvious collagen fibrosis and the severity of the lung injury increased with time after exposure to respective dosage increased. Several parameters of pulmonary inflammation and fibrosis significantly increased in both groups, which was reflected by increased LDH activity, total proteins, TNF-α, and IL-6 levels in BALF, and confirmed by histopathological examination. The results also showed that the two models exhibited different features. Exposure to Nano-ITO caused persistent chronic lung inflammation, illustrated by the infiltration of a large amount of enlarged and foamy macrophages and neutrophils into the lung parenchyma. In Nano-SiO2 exposed rat lung tissue, granulomatous inflammation was most prominent followed by progressive and massive fibrotic nodules. Compared with the Nano-SiO2 rats, Nano-ITO exposed rats exhibited significantly severe pulmonary alveolar proteinosis (PAP) pathological changes, lower fibrosis, and higher levels of inflammatory biomarkers. However, Nano-SiO2 exposed rats had greater fibrosis pathological changes and more severe granulomas than Nano-ITO exposed rats. Conclusion: This study suggests that the Nano-SiO2-induced model has greater value in research into granulomas and fibrosis, while the Nano-ITO-induced model has greater repeatability in area of PAP.

Ultrafine Mix-Phase SnO-SnO2 Nanoparticles Anchored on Reduced Graphene Oxide Boost Reversible Li-Ion Storage Capacity beyond Theoretical Limit.

Tin-based materials with high specific capacity have been studied as high-performance anodes for Li-ion storage devices. Herein, a mix-phase structure of SnO-SnO2@rGO (rGO = reduced graphene oxide) was designed and prepared via a simple chemical method, which leads to the growth of tiny nanoparticles of a mixture of two different tin oxide phases on the crumbled graphene nanosheets. The three-dimensional structure of graphene forms the conductive framework. The as-prepared mix phase SnO-SnO2@rGO exhibits a large Brunauer-Emmett-Teller surface area of 255 m2 g-1 and an excellent ionic diffusion rate. When the resulting mix-phase material was examined for Li-ion battery anode application, the SnO-SnO2@rGO was noted to deliver an ultrahigh reversible capacity of 2604 mA h g-1 at a current density of 0.1 A g-1. It also exhibited superior rate capabilities and more than 82% retention of capacity after 150 charge-discharge cycles at 0.1 A g-1, lasting until 500 cycles at 1 A g-1 with very good retention of the initial capacity. Owing to the uniform defects on the rGO matrix, the formation of LiOH upon lithiation has been suggested to be the primary cause of this very high reversible capacity, which is beyond the theoretical limit. A Li-ion full cell was assembled using LiNi0.5Mn0.3Co0.2O2 (NMC-532) as a high-capacity cathodic counterpart, which showed a very high reversible capacity of 570 mA h g-1 (based on the anode weight) at an applied current density of 0.1 A g-1 with more than 50% retention of capacity after 100 cycles. This work offers a favorable design of electrode material, namely, mix-phase tin oxide-nanocarbon matrix, exhibiting adequate electrochemical performance for Li storage applications.

Green and Cost-Effective Synthesis of Tin Oxide Nanoparticles: A Review on the Synthesis Methodologies, Mechanism of Formation, and Their Potential Applications.

Nanotechnology has become the most promising area of research with its momentous application in all fields of science. In recent years, tin oxide has received tremendous attention due to its fascinating properties, which have been improved with the synthesis of this material in the nanometer range. Numerous physical and chemical methods are being used these days to produce tin oxide nanoparticles. However, these methods are expensive, require high energy, and also utilize various toxic chemicals during the synthesis. The increased concerns related to human health and environmental impact have led to the development of a cost-effective and environmentally benign process for its production. Recently, tin oxide nanoparticles have been successfully synthesized by green methods using different biological entities such as plant extract, bacteria, and natural biomolecules. However, industrial-scale production using green synthesis approaches remains a challenge due to the complexity of the biological substrates that poses a difficulty to the elucidations of the reactions and mechanism of formations that occur during the synthesis. Hence, the present review summarizes the different sources of biological entities and methodologies used for the green synthesis of tin oxide nanoparticles and the impact on their properties. This work also describes the advances in the understanding of the mechanism of formation reported in the literature and the different analytical techniques used for characterizing these nanoparticles.

Porous, flexible, and core-shell structured carbon nanofibers hybridized by tin oxide nanoparticles for efficient carbon dioxide capture.

HYPOTHESIS: Carbon based nanofibrous materials are considered to be promising sorbents for the CO2 capture and storage. However, the precise control of porous structure with flexibility still remains a challenging task. In this research, we report a simple strategy to develop tin oxide (SnO2) embedded, flexible and highly porous core-shell structured carbon nanofibers (CNFs) derived from polyacrylonitrile (PAN)/polyvinylidene fluoride (PVDF) core-shell nanofibers. EXPERIMENT: PAN/PVDF core-shell solutions were electrospun using co-axial electrospinning process. The as spun PAN core, and PVDF shell, with an appropriate amount of SnO2, fibers were stabilized followed by carbonization to develop SnO2 embedded highly porous and flexible core-shell structured CNFs. FINDINGS: The optimized CNFs membrane shows a prominent CO2 capture capacity of 2.6 mmol g-1 at room temperature, excellent CO2 selectivity than N2, and a remarkable cyclic stability. After 20 adsorption-desorption cycles, the CO2 capture capacity retains >95% of the preliminary value showing the long-term stability and practical worth of the final product. The loading of SnO2 nanoparticles in the carbon matrix not only enhanced the thermal stability of the precursor nanofibers, their surface characteristics, and porous structure to capture CO2 molecules, but also improves the flexibility of the CNFs by serving as a plasticizer for single-fiber-crack connection. Meaningfully, the flexible SnO2 embedded core-shell CNFs with excellent structural stability can prevail the limitations of annihilation and collapse of structures for conventional adsorbents, which makes them strongly useful and applicable. This research introduces a new route to produce highly porous and flexible materials as solid adsorbents for CO2 capture.

Charge-Transfer-Modulated Transparent Supercapacitor Using Multidentate Molecular Linker and Conductive Transparent Nanoparticle Assembly.

One of the most critical issues in preparing high-performance transparent supercapacitors (TSCs) is to overcome the trade-off between areal capacitance and optical transmittance as well as that between areal capacitance and rate capability. Herein, we introduce a TSC with high areal capacitance, fast rate capability, and good optical transparency by minimizing the charge transfer resistance between pseudocapacitive nanoparticles (NPs) using molecular linker- and conductive NP-mediated layer-by-layer (LbL) assembly. For this study, bulky ligand-stabilized manganese oxide (MnO) and indium tin oxide (ITO) NP multilayers are LbL-assembled through a ligand exchange reaction between native ligands and small multidentate linkers (tricarballylic acid). The introduced molecular linker substantially decreases the separation distance between neighboring NPs, thereby reducing the contact resistance of electrodes. Moreover, the periodic insertion of ITO NPs into the MnO NP-based electrodes can lower the charge transfer resistance without a meaningful loss of transmittance, which can significantly improve the areal capacitance. The areal capacitances of the ITO NP-free electrode and the ITO NP-incorporated electrode are 24.6 mF cm-2 (at 61.6% transmittance) and 40.5 mF cm-2 (at 60.8%), respectively, which outperforms state of the art TSCs. Furthermore, we demonstrate a flexible symmetric solid-state TSC that exhibits scalable areal capacitance and optical transmittance.

Thermal Calcination-Based Production of SnO2 Nanopowder: An Analysis of SnO2 Nanoparticle Characteristics and Antibacterial Activities.

SnO2 nanoparticle production using thermal treatment with tin(II) chloride dihydrate and polyvinylpyrrolidone capping agent precursor materials for calcination was investigated. Samples were analyzed using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), diffuse UV-vis reflectance spectra, photoluminescence (PL) spectra and the electron spin resonance (ESR). XRD analysis found tetragonal crystalline structures in the SnO2 nanoparticles generated through calcination. EDX and FT-IR spectroscopy phase analysis verified the derivation of the Sn and O in the SnO2 nanoparticle samples from the precursor materials. An average nanoparticle size of 4–15.5 nm was achieved by increasing calcination temperature from 500 °C to 800 °C, as confirmed through TEM. The valence state and surface composition of the resulting nanoparticle were analyzed using XPS. Diffuse UV-vis reflectance spectra were used to evaluate the optical energy gap using the Kubelka-Munk equation. Greater calcination temperature resulted in the energy band gap falling from 3.90 eV to 3.64 eV. PL spectra indicated a positive relationship between particle size and photoluminescence. Magnetic features were investigated through ESR, which revealed the presence of unpaired electrons. The magnetic field resonance decreases along with an increase of the g-factor value as the calcination temperature increased from 500 °C to 800 °C. Finally, Escherichia coli ATCC 25922 Gram (–ve) and Bacillus subtilis UPMC 1175 Gram (+ve) were used for in vitro evaluation of the tin oxide nanoparticle’s antibacterial activity. This work indicated that the zone of inhibition of 22 mm has good antibacterial activity toward the Gram-positive B. subtilis UPMC 1175.