Super-Flexible Water-Proof Actuators.

Humidity-responsive materials hold broad application prospects in sensing, energy production, and other fields. Particularly, humidity-sensitive, flexibility, and water resistance are pivotal factors in the development of optimized humidity-responsive materials. In this study, hydrophobic linear polyurethane and hydrophilic 4-vinylphenylboronic acid (4-VPBA) form a semi-intercross cross-linking network. This copolymer of polyurethane exhibits excellent humidity-sensitive, mechanical properties, and water resistance. Its maximum tensile strength and maximum elongation can reach 40.56 MPa and 543.47%, respectively. After being immersed in water at various temperatures for 15 days, it exhibited a swelling ratio of only 3.28% in water at 5 °C and 9.58% in water at 70 °C. While the presence of 4-VPBA network imparts humidity-sensitive, reversible, and multidirectional bending abilities, under the stimulus of water vapor, it can bend 43° within 1.4 s. The demonstrated material surpasses current bidirectional humidity actuators in actuating ability. Based on these characteristics, automatically opening waterproof umbrellas and windows, as well as bionic-arms, crawling robots, and self-propelled boats, are successfully developed.

Double-Phase-Networking Polyimide Hybrid Aerogel with Exceptional Dimensional Stability for Superior Thermal Protection System.

Polyimide aerogels have been extensively used in thermal protection domain because they possess a combination of intrinsic characteristics of aerogels and unique features of polyimide. However, polyimide aerogels still suffer significant thermally induced shrinkage at temperatures above 200 °C, restricting their application at high temperature. Here, a novel "double-phase-networking" strategy is proposed for fabricating a lightweight and mechanically robust polyimide hybrid aerogel by forming silica-zirconia-phase networking skeletons, which possess exceptional dimensional stability in high-temperature environments and superior thermal insulation. The rational mechanism responsible for the formation of double-phase-networking aerogel is further explained, generally attributing to chemical crosslinking reactions and supramolecular hydrogen bond interactions derived from the main chains of polyimide and silane/zirconia precursor/sol. The as-prepared aerogels exhibit excellent high-temperature (270 °C) dimensional stability (5.09% ± 0.16%), anti-thermal-shock properties, and low thermal conductivity. Moreover, the hydrophobic treatment provides aerogels high water resistance with water contact angle of 136.9°, further suggestive of low moisture content of 3.6% after exposure to 70 °C and 85% relative humidity for 64 h. The proposed solution for significantly enhancing high-temperature dimensional stability and thermal insulation provides a great supporting foundation for fabricating high-performance organic aerogels as thermal protection materials in aerospace.

Asymmetric Coordination of Single-Atom Ru Sites Achieves Efficient N(sp3)-H Dehydrogenation Catalysis for Ammonia Oxidation.

Ruthenium single-atom catalysts have great potential in ammonia-selective catalytic oxidation (NH3-SCO); however, the stable sp3 hybrid orbital of NH3 molecules makes N(sp3)-H dissociation a challenge for conventional symmetrical metallic oxide catalysts. Herein, we propose a heterogeneous interface reverse atom capture strategy to construct Ru with unique asymmetric Ru1N2O1 coordination. Ru1N2O1/CeO2 exhibits intrinsic low-temperature conversion (T100 at 160 °C) compared to symmetric coordinated Ru-based (280 °C), Ir-based (220 °C), and Pt-based (200 °C) catalysts, and the TOF is 65.4 times that of Ag-based catalysts. The experimental and theoretical studies show that there is a strong d-p orbital interaction between Ru and N atoms, which not only enhances the adsorption of ammonia at the Ru1N2O1 position but also optimizes the electronic configuration of Ru. Furthermore, the affinity of Ru1N2O1/CeO2 to water is significantly weaker than that of conventional catalysts (the binding energy of the Pd3Au1 catalyst is -1.19 eV, but it is -0.39 eV for our material), so it has excellent water resistance. Finally, the N(sp3)-H activation of NH3 requires the assistance of surface reactive oxygen species, but we found that asymmetric Ru1N2O1 can directly activate the N(sp3)-H bond without the involvement of surface reactive oxygen species. This study provides a novel principle for the rational design of the proximal coordination of active sites to achieve its optimal catalytic activity in single-atom catalysis.

Stable O3 Decomposition by Layered Double Hydroxides: The Pivotal Role of NiOOH Transformation.

Because ozone (O3) is a significant air pollutant, advanced O3 elimination technologies, particularly those under high-humidity conditions, have become an essential research focus. In this study, a nickel-iron layered double hydroxide (NiFe-LDH) was modified via intercalation with octanoate to develop an effective hydrophobic catalyst (NiFe-OAa-LDH) for O3 decomposition. The NiFe-OAa-LDH catalyst sustained its O3 decomposition rate of >98% for 48 h under conditions of 90% relative humidity, 840 L/(g·h) space velocity, and 100 ppm inlet O3 concentration. Moreover, it maintained a decomposition rate of 90% even when tested at a higher airflow rate of 2500 L/(g·h). Based on the changes induced by the Ni-OII to Ni-OIII bonds in NiFe-OAa-LDH during O3 treatment, catalytic O3 decomposition was proposed to occur in two stages. The first stage involved the reaction between the hydroxyl groups and O3, leading to the breakage of the O-H bonds, formation of NiOOH, and structural changes in the catalyst. This transformation resulted in the formation of abundant and stable hydrogen vacancies. According to density functional theory calculations, O3 can be effectively decomposed at the hydrogen vacancies with a low energy barrier during the second stage. This study provides new insights into O3 decomposition.

Lattice matching enables construction of CaS@NaYF4 heterostructure with synergistically enhanced water resistance and luminescence for antibiotic detection.

Rare earth (RE)-doped CaS phosphors have been widely used as light-emitting components in various fields. Nevertheless, the application of nanosized CaS particles is still significantly limited by their poor water resistance and weak luminescence. Herein, a lattice-matching strategy is developed by growing an inert shell of cubic NaYF4 phase on the CaS luminescent core. Due to their similarity in crystal structure, a uniform core-shell heterostructure (CaS:Ce3+@NaYF4) can be obtained, which effectively protects the CaS:Ce3+ core from degradation in aqueous environment and enhances its luminescence intensity. As a proof of concept, a label-free aptasensor is further constructed by combining core-shell CaS:Ce3+@NaYF4 and Au nanoparticles (AuNPs) for the ultrasensitive detection of kanamycin antibiotics. Based on the efficient FRET process, the detection linear range of kanamycin spans from 100 to 1000 nM with a detection limit of 7.8 nM. Besides, the aptasensor shows excellent selectivity towards kanamycin antibiotics, and has been successfully applied to the detection of kanamycin spiked in tap water and milk samples, demonstrating its high potential for sensing applications.

Effect of Fiber Loading on Mechanical and Flame-Retardant Properties of Poplar-Fiber-Reinforced Gypsum Composites.

Gypsum-based composites were prepared via a slurry casting process using construction gypsum as the binding material and poplar fibers as reinforcing material. The effects of different fiber content and curing time on the mechanical properties, water resistance, and flame retardancy of these composites were investigated, and the influence mechanism was characterized by infrared spectroscopy, scanning electron microscopy, and X-ray diffractometry. The results showed that the best composite mechanical strength was achieved with 10% poplar fiber- content, and the absolute dry flexural and compressive strengths reached 3.59 and 8.06 MPa, respectively. Compared with pure gypsum, the flexural strength and compressive strength increased by 10% and 19%, respectively. The inclusion of fibers somewhat prevented the migration of free water within the composites and enhanced their water resistance. At 10% fiber content, the composite's 24 h water absorption rate was 34.3%, 8% lower than that of pure gypsum, with a softening coefficient of 0.55. However, fiber content increases the porosity of gypsum-based composites. When heated, this increased porosity accelerates' heat conduction within the matrix, raising the peak and total exothermic rates, thereby weakening the composites' inherently flame-retardant properties. Poplar-fiber-reinforced gypsum-based composites offered superior performance in commercial applications, compared to pure gypsum board, providing a sustainable and green alternative for ceilings, partitions, and other applications, while broadening the prospects for gypsum-based composites in the engineering field.

High-strength gypsum binder with improved water-resistance coefficient derived from industrial wastes.

The article presents the possibility of increasing the water resistance of gypsum binders (GBs) obtained based on synthetic gypsum by introducing additives derived from industrial wastes. Regularities were obtained for the influence of the type and amount of additives on the water/gypsum ratio (W/G), strength indicators and water resistance of high-strength GB. The introduction of a single-component additive to improve water resistance does not have a significant effect. Complex additives based on Portland cement, granulated blast-furnace slag, electric steel-smelting slag, expanded clay dust and granite screenings of various fractions have been developed that make the maximum contribution to improving the water resistance of a high-strength GB based on synthetic calcium sulphate dihydrate, which made it possible to increase the water-resistance coefficient from 0.39 to 0.82.

Water-Resistance-Based S-Scheme Heterojunction for Deep Mineralization of Toluene.

Deep mineralization of low concentration toluene (C7 H8 ) is one of the most significant but challenging reactions in photocatalysis. It is generally assumed that hydroxyl radicals (⋅OH) as the main reactive species contribute to the enhanced photoactivity, however, it remains ambiguous at this stage. Herein, a S-scheme ZnSn(OH)6 -based heterojunction with AlOOH as water resistant surface layer is in situ designed for tuning the free radical species and achieving deep mineralization of C7 H8 . By employing a combination of in situ DRIFTS and materials characterization techniques, we discover that the dominant intermediates such as benzaldehyde and benzoic acid instead of toxic phenols are formed under the action of holes (h+ ) and superoxide radicals (⋅O2 - ). These dominant intermediates turn out to greatly decrease the ring-opening reaction barrier. This study offers new possibilities for rationally tailoring the active species and thus directionally producing dominant intermediates via designing water resistant surface layer.

Molecular Crystals Constructed by Polar Molecular Cages: A Promising System for Exploring High-performance Infrared Nonlinear Optical Crystals.

Polar molecular crystals, with their densely stacked polar nonlinear optical (NLO) active units, are favored for their large second harmonic generation (SHG) responses and birefringence. However, their potential for practical applications as Infrared (IR) NLO materials has historically been underappreciated due to the weak inter-molecular interaction forces that may compromise their physicochemical properties. In this study, we propose molecular crystals with polar molecular cages as a treasure-house for the development of superior IR NLO materials and a representative system, binary chalcogenide molecular crystals, composed of [P4 Sn ] (n=3-9) polar molecular cages, is introduced. These crystals may not only achieve wide band gap, large SHG response, and birefringence in a single structure, but also exhibit favorable physicochemical properties. We subsequently obtained a polar molecular crystal, α-P4 S5 , which demonstrated exceptional IR optical properties, including a strong SHG response (1.1×AGS), wide band gap (3.02 eV), large birefringence (0.134@2050 nm), and a broad transmission range (0.41-14.7 µm). Moreover, it showed excellent water resistance and hardness. These findings highlight the potential of polar molecular crystals as a promising platform for the development of high-performance IR NLO materials.

Insulative Biobased Glaze from Wood Laminates Obtained by Self-Adhesion.

The combination of optical transparency and mechanical strength is a highly desirable attribute of wood-based glazing materials. However, such properties are typically obtained by impregnation of the highly anisotropic wood with index-matching fossil-based polymers. In addition, the presence of hydrophilic cellulose leads to a limited water resistance. Herein, this work reports on an adhesive-free lamination that uses oxidation and densification to produce transparent all-biobased glazes. The latter are produced from multilayered structures, free of adhesives or filling polymers, simultaneously displaying high optical clarity and mechanical strength, in both dry and wet conditions. Specifically, high values of optical transmittance (≈85.4%), clarity (≈20% with low haze) at a thickness of ≈0.3 mm, and highly isotropic mechanical strength and water resistance (wet strength of ≈128.25 MPa) are obtained for insulative glazes exhibiting low thermal conductivity (0.27 W m-1 K-1 , almost four times lower than glass). The proposed strategy results in materials that are systematically tested, with the leading effects of self-adhesion induced by oxidation rationalized by ab initio molecular dynamics simulation. Overall, this work demonstrates wood-derived materials as promising solutions for energy-efficient and sustainable glazing applications.

Insight into the Promotion Effect of Trace Pd Doping on the Catalytic Performance of Ag/Al2O3 for C3H6-SCR of NOx.

The mechanistic cause of the enhancement of the C3H6-SCR activity of Ag/Al2O3 by trace Pd doping and the corresponding structure-property relationship were investigated. Pd doping enhanced the water resistance of Ag/Al2O3 for C3H6-SCR by changing the reaction pathway. Under wet conditions, a series of in situ DRIFT studies indicated that the production of an active acetate intermediate on Ag/Al2O3 was suppressed during the partial oxidation of C3H6, while trace Pd doping promoted the formation of another active intermediate, an enolic species. Furthermore, a pathway for the formation of enolic species by the reaction of acrylate with hydroxyl species was proposed. DFT calculations revealed that the surface of Ag clusters was easily covered by hydroxyl in the presence of water vapor, which could inhibit the formation of acetates. Doping with Pd facilitated the activation of acrylate which might further react with hydroxyl species to form enolic species. These findings can be helpful for the future design of efficient HC-SCR catalysts.

Valorization of sewage sludge for facile and green wood bio-adhesives production.

A method is presented herein for the design of wood bio-adhesives using sewage sludge extracts (SSE). SSE was extracted from SS using deep eutectic solvents and processed with glycerol triglycidyl ether (GTE) to disrupt the secondary structure of proteins. An additive was also used to improve mechanical performance. The resulting bio-adhesive (SSE/GTE@TA) had a wet shear strength of 0.93 MPa, meeting the Chinese national standard GB/T 9846-2015 (≥0.7 MPa). However, the high polysaccharide content in SSE would weaken the mechanical properties of wood bio-adhesives. The key to improve bio-adhesive quality was the formation of a strong chemical bond via Maillard reaction as well as higher temperatures (140 °C) to reduce polysaccharide content via dehydration. This approach has lower environmental impact and higher economic efficiency compared to incineration and anaerobic digestion of sewage sludge. This work provides a new perspective on the high-value utilization of SS and offers a novel approach to developing bio-adhesives for the wood industry.

Structure and Properties of the Xerogels Based on Potassium Silicate Liquid Glass and Urea.

The xerogels based on the aqueous solutions of urea in potassium silicate liquid glass (PSLG) were produced by CO2 bubbling and investigated. The structure and chemical composition of the obtained materials were analyzed. Using the SEM, XRD, IR-FT, DSC, and low energy local EDS analysis, it was recognized that the dried gels (xerogels) contained three forms of urea: oval crystals of regular shape appeared onto the surface of xerogel particles; fibrous crystals were located in the silicate matrix; and molecules/ions were incorporated into the silicate matrix. It was shown that an increase in [(NH2)2CO] in the gel-forming system promoted increased contents in crystalline forms of urea as well as the diameter of the fiber-shaped urea crystals. A rate of the urea release in water from the granulated xerogels containing 5.8, 12.6, and 17.9 wt.% of urea was determined by the photometric method. It was determined that the obtained urea-containing xerogels were characterized with a slow release of urea, which continued up to 120 days, and could be used as controlled release fertilizers containing useful nutrients (N, K).

DRIFTS-MS Investigation of Low-Temperature CO Oxidation on Cu-Doped Manganese Oxide Prepared Using Nitrate Aerosol Decomposition.

Cu-doped manganese oxide (Cu-Mn2O4) prepared using aerosol decomposition was used as a CO oxidation catalyst. Cu was successfully doped into Mn2O4 due to their nitrate precursors having closed thermal decomposition properties, which ensured the atomic ratio of Cu/(Cu + Mn) in Cu-Mn2O4 close to that in their nitrate precursors. The 0.5Cu-Mn2O4 catalyst of 0.48 Cu/(Cu + Mn) atomic ratio had the best CO oxidation performance, with T50 and T90 as low as 48 and 69 °C, respectively. The 0.5Cu-Mn2O4 catalyst also had (1) a hollow sphere morphology, where the sphere wall was composed of a large number of nanospheres (about 10 nm), (2) the largest specific surface area and defects on the interfacing of the nanospheres, and (3) the highest Mn3+, Cu+, and Oads ratios, which facilitated oxygen vacancy formation, CO adsorption, and CO oxidation, respectively, yielding a synergetic effect on CO oxidation. DRIFTS-MS analysis results showed that terminal-type oxygen (M=O) and bridge-type oxygen (M-O-M) on 0.5Cu-Mn2O4 were reactive at a low temperature, resulting in-good low-temperature CO oxidation performance. Water could adsorb on 0.5Cu-Mn2O4 and inhibited M=O and M-O-M reaction with CO. Water could not inhibit O2 decomposition to M=O and M-O-M. The 0.5Cu-Mn2O4 catalyst had excellent water resistance at 150 °C, at which the influence of water (up to 5%) on CO oxidation could be completely eliminated.

Preparation and properties of environmentally benign waterborne polyurethane composites from sodium-alginate-modified nano calcium carbonate.

Well-dispersed inorganic nanoparticles in organic polymers are critical in the preparation of high-performance nanocomposites. This study prepared a series of waterborne polyurethane (WPU)/calcium carbonate nanocomposites using the solution blending method. Next, FT-IR, TG-DTG and XRD tests were carried out to confirm that the biopolymer sodium alginate (SA) was successfully encapsulated on the surface of the calcium carbonate nanoparticles, and that SA achieved satisfactory surface modification of the calcium carbonate nanoparticles. The Zeta and ultraviolet (UV) absorbance test results reveal that SA-modified nano calcium carbonate (MCC) had good dispersion stability in water. The effects of the MCC dosage on the composite mechanical properties, thermal stability, and cross-sectional morphology observed by scanning electron microscopy, and the water resistance of the nanocomposite were investigated. The results reveal that the incorporation of 3wt% of MCC in WPU had stable distribution, which led to a 54% increase in the tensile strength of the nanocomposite, while maintaining excellent elongation at break (2187%) and increasing the maximum decomposition temperature to 419.6 °C. Importantly, the improved water resistance facilitates the application of this environmentally benign composite material in humid environments.

Enhanced Water Resistance and Catalytic Performance of Ru/TiO2 by Regulating Brønsted Acid and Oxygen Vacancy for the Oxidative Removal of 1,2-Dichloroethane and Toluene.

The compositions of volatile organic compounds (VOCs) under actual industrial conditions are often complex; especially, the interaction of intermediate products easily leads to more toxic emissions that are harmful to the atmospheric environment and human health. Herein, we report a comparative investigation on 1,2-dichloroethane (1,2-DCE) and (1,2-DCE + toluene) oxidation over the Ru/TiO2, phosphotungstic acid (HPW)-modified Ru/TiO2, and oxygen vacancy-rich Ru/TiOx catalysts. The doping of HPW successfully introduced the 1,2-DCE adsorption sites to promote its oxidation and exhibited outstanding water resistance. For the mixed VOCs, Ru/HPW-TiO2 promoted the preferential and superfluous adsorption of toluene and resulted in the inhibition of 1,2-DCE degradation. Therefore, HPW modification is a successful strategy in catalytic 1,2-DCE oxidation, but Brønsted acid sites tend to adsorb toluene in the mixed VOC oxidation. The Ru/TiOx catalyst exhibited excellent activity and stability in the oxidation of mixed VOCs and could inhibit the generation of byproducts and Cl2 compared with the Ru/HPW-TiO2 catalyst. Compared with the Brønsted acid modification, the oxygen vacancy-rich catalysts are significantly suitable for the oxidation of multicomponent VOCs.

Synergistic Effect of Reactive Oxygen Species in Photothermocatalytic Removal of VOCs from Cooking Oil Fumes over Pt/CeO2/TiO2.

The volatile organic compounds (VOCs) from cooking oil fumes are very complex and do harm to humans and the environment. Herein, we develop the high-efficiency and energy-saving synergistic photothermocatalytic oxidation approach to eliminate the mixture of heptane and hexanal, the representative VOCs with high concentrations in cooking oil fumes. The Pt/CeO2/TiO2 catalyst with nanosized Pt particles was prepared by the simple hydrothermal and impregnation methods, and the physicochemical properties of the catalyst were measured using numerous techniques. The Pt/CeO2/TiO2 catalyst eliminated the VOC mixture at low light intensity (100 mW cm-2) and low temperature (200 °C). In addition, it showed 25 h of catalytic stability and water resistance (water concentration up to 20 vol %) at 140 or 190 °C. It is concluded that O2 picked up the electrons from Pt to generate the •O2- species, which were transformed to the O22- and O- species after the rise in temperature. In the presence of water, the •OH species induced by light irradiation on the catalyst surface and the •OOH species formed via the thermal reaction were both supplementary oxygen species for VOC oxidation. The synergistic interaction of photo- and thermocatalysis was generated by the reactive oxygen species.

A Hydrophobic Sisal Cellulose Microcrystal Film for Fire Alarm Sensors.

At present, environmentally friendly biobased flexible films are of particular interest as next-generation fireproof packaging and sensor materials. To reduce the moisture uptake and fire risks induced by hygroscopic and flammable biobased films, we report a simple and green approach to develop a hydrophobic, flame-retardant composite film with synergetic benefit from soy protein isolate (SPI), sisal cellulose microcrystals (MSF-g-COOH), graphene nanosheets (GN), and citric acid (CA). Compared with SPI/MSF-g-COOH composite films, the as-prepared SPI/MSF-g-COOH/CA/GN composite films have significantly improved water resistance and can maintain excellent physical structure and good electrical conductivity in an ethanol flame. This work opens a pathway for the development of novel fire-retardant fire alarm biosensors.

A Water-Soluble Epoxy-Based Green Crosslinking System for Stabilizing PVA Nanofibers.

With the ever-growing concern about environmental conservation, green production and water-based nanofibers have attracted more and more interest from both academic and industrial fields; nevertheless, the stabilization process of water-based nanofibers is primarily relying on the application of organic solvent-based crosslinking agents. In this work, we develop a green approach to fabricate water-resistant polyvinyl alcohol (PVA) nanofibers by using a water-based epoxy compound, N1, N6-bis(oxiran-2-ylmethyl) hexane-1,6-diamine (EH), as the crosslinker. This EH/sodium carbonate/sodium bicarbonate (CBS) solution system can break down large aggregates of PVA molecules into small ones and promote the uniform distribution of EH in the solution, resulting in the improved stability of crosslinked PVA nanofibers. We firstly report that the uniform dispersion of crosslinking agents in the electrospinning solution plays a vital role in improving the stability of spinning solutions and the water resistance of crosslinked PVA nanofibers by comparing crosslinking performances between water-based epoxy and conventional water-based blocked isocyanate (BI). This work could open up a novel strategy and green approach for the stabilization of water-based nanofibers.

Effects of Different Denaturants on the Properties of a Hot-Pressed Peanut Meal-Based Adhesive.

Plant protein-based adhesives could fundamentally solve the problem of formaldehyde-based adhesive releasing formaldehyde, but enhancing bonding strength and water resistance is a necessary measure to realize practical applications. In this study, the effects of different denaturants on the properties of a hot-pressed peanut meal (HPM)-based adhesive before and after crosslinking were studied. Papain, sodium dodecyl sulfate (SDS), urea and crosslinker-polyamide epichlorohydrin (PAE) were used to prepare HPM-based adhesives. The functional groups, bonding strength, thermal behaviors, mass loss, moisture uptake value, viscosity and fracture surface of adhesive samples were analyzed. As a result, (1) papain was used to break HPM protein (HPMP) into polypeptide chains and to reduce the water resistance. (2) SDS and urea unfold the HPMP molecule and expose internal hydrophobic groups to improve the water resistance of the adhesive. (3) A denser network structure was formed by PAE and HPMP molecules, which significantly improved the bonding strength and water resistance of adhesives. In particular, after SDS denaturation and PAE crosslinking, compared with pure HPM adhesive, the wet shear strength increased by 96.4%, the mass loss and moisture uptake value reduced by 41.4% and 69.4%, and viscosity increased by 30.4%. This work provided an essential guide to design and prepare HPM-based adhesives.