The TOG protein Stu2 is regulated by acetylation.

Stu2 in S. cerevisiae is a member of the XMAP215/Dis1/CKAP5/ch-TOG family of MAPs and has multiple functions in controlling microtubules, including microtubule polymerization, microtubule depolymerization, linking chromosomes to the kinetochore, and assembly of γ-TuSCs at the SPB. Whereas phosphorylation has been shown to be critical for Stu2 localization at the kinetochore, other regulatory mechanisms that control Stu2 function are still poorly understood. Here, we show that a novel form of Stu2 regulation occurs through the acetylation of three lysine residues at K252, K469, and K870, which are located in three distinct domains of Stu2. Alteration of acetylation through acetyl-mimetic and acetyl-blocking mutations did not impact the essential function of Stu2. Instead, these mutations lead to a decrease in chromosome stability, as well as changes in resistance to the microtubule depolymerization drug, benomyl. In agreement with our in silico modeling, several acetylation-mimetic mutants displayed increased interactions with γ-tubulin. Taken together, these data suggest that Stu2 acetylation can govern multiple Stu2 functions, including chromosome stability and interactions at the SPB.

Molecularly imprinted polymers for the detection of benomyl residues in water and soil samples.

Benomyl is a benzimidazol fungicide used against various crop pathogens. Although banned in many countries, it is still widely used worldwide and is listed in different monitoring programs among the substances to be monitored to assess human exposure to pesticide residues. The assessment of benomyl is mainly based on the analysis of the residues of its most important metabolite, carbendazim. Existing methods often lack of selectivity and display a limited performance because of the presence of co-extracted compounds. Molecularly imprinted polymers (MIPs) offer an alternative methodology, adsorbing preferentially those target molecules for which the polymers are specifically prepared. In this study, we optimized the synthesis of a polymer imprinted with benomyl. Tests of specificity recognition showed a good performance for carbendazim compared with other similar pesticides. The mean recovery of benomyl (measured as carbendazim) from water samples was estimated to be 90% for MIPs while with real soil samples collected in Morocco the recovery efficiency was 62%. Preliminary tests also suggest that this MIP can implement traditional SPE techniques for assessing benomyl residual concentrations in environmental samples.

Electro-oxidation and determination of benomyl by square-wave adsorptive stripping voltammetry.

The electro-oxidation of the benomyl fungicide was studied by square-wave adsorptive stripping voltammetry. The voltammetric current at a glassy carbon electrode was acquired within the pH range 1.0-10.0. The quantitation was performed using the peak generated at +1144 mV by scanning the potential from +0.00 to +1600 mV (versus an Ag/AgCI reference electrode, 3 M NaCl). Accumulation potential = 0.0 mV, accumulation time=45 s, frequency=75 Hz, pulse amplitude=-60 mV, and staircase step potential = 7 mV were used as square-wave parameters. The peak current versus concentrations plot were rectilinear over the range from 0.081 to 1.496 microg/mL with an LOD of 0.024 microg/mL. Mean recovery was 99.0% (0.198 +/- 0.011 microg/mL), which was very close to the benomyl content spiked into river water (0.20 microg/mL). The method was efficiently applied for benomyl determination in the pesticide formulation Minelate 50WG, and the average determined content of 49.8 +/- 0.16 (n = 5) was consistent with the 50% benomyl (w/w) quoted by the manufacturer. The benomyl voltammograms recorded between days exhibited a negligible degradation into carbendazim metabolite, and therefore all results were given as the total benomyl concentration. The high recoveries and low RSD gave evidence of good accuracy and precision.

Risk assessment of pesticides used in the eastern Avocado Belt of Michoacan, Mexico: A survey and water monitoring approach.

Pesticides use raises concerns regarding environmental sustainability, as pesticides are closely linked to the decline of biodiversity and adverse human health outcomes. This study proposed a holistic approach for assessing the potential risks posed by pesticides for human health and the environment in the eastern region of Michoacan, where extensive agricultural lands, especially corn and avocado fields, surround the Monarch Butterfly Biosphere Reserve. We used a combination of qualitative (semi-structured interviews) and quantitative (chemical analysis) data. Fifty-five interviews with smallholder farmers allowed us to identify pesticide types, quantities, frequencies, and application methods. A robust and precise analytical method based on solid-phase extraction and LC-MS/MS was developed and validated to quantify 21 different pesticides in 16 water samples (rivers, wells, runoff areas). We assessed environmental and human health risks based on the pesticides detected in the water samples and reported in the interviews. The interviews revealed the use of 28 active ingredients, including glyphosate (29 % of respondents), imidacloprid (27 %), and benomyl (24 %). The pesticide analysis showed the presence of 13 different pesticides and degradation products in the water samples. The highest concentrations were found for imidacloprid (1195 ngL-1) and carbendazim (a degradation product of benomyl; 932 ngL-1), along with the metabolite of pyrethroid insecticides, 3-PBA (494 ngL-1). The risk assessment indicates that among the most used pesticides, the fungicide benomyl and carbendazim pose the highest risk to human health and aquatic ecosystems, respectively. This study unveils novel insights on agricultural practices for the avocado, a globally consumed crop that is undergoing rapid production expansion. It calls for the harmonisation of crop protection with environmental responsibility, safeguarding the health of the people involved and the surrounding ecosystems.

Liquid chromatographic determination of benomyl in water samples after dispersive liquid-liquid microextraction.

A dispersive liquid-liquid microextraction (DLLME) method combined with solvolysis reaction for extraction of the carbamate fungicide benomyl as carbendazim from water samples is described. The method is based on the extraction of benomyl from acidified sample solution and its conversion into carbendazim via solvolysis reaction with DMF as organic solvent. The proposed DLLME method was followed by HPLC with fluorimetric detection for determination of benomyl. The proposed method has good linearity (0.998) with wide linear dynamic range (0.01-25 mg/L) and low detection limit (0.0033 mg/L), making it suitable for benomyl determination in water samples.

Terrestrial avoidance behaviour tests as screening tool to assess soil contamination.

To assess soil quality and risk assessment, bioassays can be useful tools to gauge the potential toxicity of contaminants focusing on their bioavailable fraction. A rapid and sublethal avoidance behaviour test was used as a screening tool with the earthworm Eisenia andrei and the isopod Porcellionides pruinosus, where organisms were exposed during 48 h to several chemicals (lindane, dimethoate and copper sulphate, for isopods and carbendazim, benomyl, dimethoate and copper sulphate for earthworms). Both species were also exposed to soils from an abandoned mine. For all bioassays a statistical approach was used to derive EC50 values. Isopods and earthworms were able to perceive the presence of toxic compounds and escaping from contaminated to clean soil. Furthermore the behaviour parameter was equally or more sensitive then other sublethal parameters (e.g. reproduction or growth), expressing the advantages of Avoidance Behaviour Tests as screening tools in ERA.

Flow-through fluorescence-based optosensor with on-line solid-phase separation for the simultaneous determination of a ternary pesticide mixture.

A rapid and selective method was developed for the simultaneous determination of 3 widely used pesticides, carbendazim (CBZ), carbofuran (CF), and benomyl (BNM). The method utilized a single continuous-flow, solid surface fluorometric multioptosensor implemented with a previous separation of the analytes on a minicolumn, placed just before the sensor, that was packed with the same solid support (C18 silica gel) as the flow-through cell. The separation was achieved because of the different kinetics of retention/elution of the pesticides on the solid support in the minicolumn, enabling the sequential arrival of the analytes at the sensing zone. With a single injection of the mixture, 2 of them were more strongly retained in the minicolumn (CF and BNM) while the other (CBZ) passed through the system towards the sensing material where it developed its fluorescence transitory signal. Then, CF and BNM were successively eluted from the solid support using 2 different eluting solutions, and they sequentially reached the sensing zone and developed their respective signals. A multiwavelength fluorescence detection mode was used, recording the signals of each pesticide at its maximum excitation/emission wavelength; therefore, the sensitivity was increased. The system was calibrated using a sample volume of 2000 microL. The linear dynamic range was 80-1400, 250-2400, and 150-2000 ng/mL with detection limits of 15, 68, and 35 ng/mL and relative standard deviation values of 3.5, 3.2, and 2.4% for CBZ, CF, and BNM, respectively. A recovery study was applied to spiked environmental water samples, and recoveries ranged from 96 to 104%.

One-Step Fabrication of a Multifunctional Magnetic Nickel Ferrite/Multi-walled Carbon Nanotubes Nanohybrid-Modified Electrode for the Determination of Benomyl in Food.

Benomyl, as one kind of agricultural pesticide, has adverse impact on human health and the environment. It is urgent to develop effective and rapid methods for quantitative determination of benomyl. A simple and sensitive electroanalytical method for determination of benomyl using a magnetic nickel ferrite (NiFe2O4)/multi-walled carbon nanotubes (MWCNTs) nanohybrid-modified glassy carbon electrode (GCE) was presented. The electrocatalytic properties and electroanalysis of benomyl on the modified electrode were investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). In the phosphate-buffered saline (PBS) of pH 6.0, this constructed biosensor exhibited two linear relationships with the benomyl concentration range from 1.00 × 10(-7) to 5.00 × 10(-7) mol/L and from 5.00 × 10(-7) to 1.00 × 10(-5) mol/L, respectively. The detection limit was 2.51 × 10(-8) mol/L (S/N = 3). Moreover, the proposed method was successfully applied to determine benomyl in real samples with satisfactory results. The NiFe2O4/MWCNTs/GCE showed good reproducibility and stability, excellent catalytic activity, and anti-interference.

High-performance liquid chromatographic determination of benomyl and carbendazim residues in apiarian samples.

Simple procedures for the extraction and chromatographic determination of benomyl and carbendazim in honey, bees wax, larvae, bees and pollen are proposed. The fungicides were extracted from honey, larvae and bees using ethyl acetate, while methanol was more suitable for wax and pollen samples. Pollen extracts need a further clean-up step with n-hexane. The determination is carried out by reversed-phase high-performance liquid chromatography (HPLC) with fluorescence detection. The procedures have been applied to the analysis of benomyl on honey and larvae samples from hives whose bees were nourished with artificial food mixed with benomyl.

Analysis of carbendazim, benomyl, thiophanate methyl and 2,4-dichlorophenoxyacetic acid in fruits and vegetables after supercritical fluid extraction.

Simple methods for the analysis of carbendazim, benomyl and thiophanate methyl in fruits and vegetables and of 2,4-D in citrus fruits are presented. Sample preparation involves supercritical fluid extraction with carbon dioxide and further analysis is performed without any additional clean-up by GC-MS after derivatisation or directly by HPLC-diode array detection. The SFE methods presented are clearly faster and more cost effective than traditional solvent based approaches. The recoveries, detection limits and repeatabilities achieved, meet the needs of tolerance level monitoring of these compounds in fruits and vegetables.

Monitoring of exposure to benomyl in nursery workers.

We compared urinary levels of the metabolite methyl-5-hydroxy-2-benzimidazole carbamate (5-HBC) among nursery workers exposed to the fungicide benomyl (specifically Benlate 50 DF [DuPont, Wilmington, DE]) and workers not exposed to benomyl. Environmental exposures were quantitated from gloves, body patches, and air samples collected with area and personal monitors. The median concentration of 5-HBC in the urine of benomyl-exposed workers was 23.8 mumol of 5-HBC per mole of creatinine. No 5-HBC was detected in the reference group. Industrial hygiene results and biological monitoring findings indicate that use of Benlate 50 DF in the ornamental industry can lead to absorption of the active ingredient, benomyl. Weighing, mixing, and application activities involved the highest exposures. Dermal contact appeared to be the primary route of exposure.

Development of a single fluorescence-based optosensor for rapid simultaneous determination of fungicides benomyl and thiabendazole in waters and commercial formulations.

A novel, sensitive, and straightforward spectrofluorimetric flow injection method is proposed in this work for the resolution of a binary mixture of two widely used fungicides (thiabendazole and benomyl). The continuous flow methodology is based on the implementation of on-line solid phase extraction (SPE), preconcentration, and separation of both analytes on a surface of C(18) silica gel beads placed just in the flow cell, with solid surface fluorescence detection. A 45- and 25-fold sensitivity enhancement was obtained for benomyl and thiabendazole, respectively (in relation to the liquid phase measurements in the absence of solid support). The separation of the pesticides was performed because of the different retention-desorption kinetics in their interaction with the solid support, in the zone where the stream impinges the solid material. No previous separation of the analytes before they reach the flow cell is needed, simplifying extraordinarily both the procedure and the manifold. Using a sample volume of 3200 microL, the system was calibrated in the range of 0.4-20 and 20-400 ng x mL(-)(1) with detection limits of 0.06 and 3.6 ng x mL(-)(1) for thiabendazole and benomyl, respectively, and RSD values (n = 10) smaller than 0.8% for both analytes. The RSD values obtained replacing the solid support in each measurement were lower than 3%, and the day-to-day reproducibility RSD value was also lower than 5%. Sampling frequencies of 10 and 18 h(-)(1) were obtained with 600 and 3200 microL of sample volume. Recovery studies carried out on natural water samples spiked with known amounts of both analytes at concentration levels in the range of 1-10 and 25-200 ng x mL(-)(1) provided mean recovery percentages ranging from 98.8 to 102% and from 98 to 103% for thiabendazole and benomyl, respectively. The proposed methodology was also applied to pesticide formulations.

Evaluation of residual levels of benomyl, methyl parathion, diuron, and vamidothion in pineapple pulp and bagasse (Smooth cayenne).

The objective of this research was to study the residual levels of benomyl, methyl parathion, diuron, and vamidothion in pineapple bagasse and pulp. Benomyl (benlate), methyl parathion (Folidol 600), diuron (Krovar), and Vamidothion (Kilval 300) were applied pre-harvest to pineapples (smooth cayenne). After harvesting, the fruits were washed (100 ppm sodium hypochlorite) and the pulp was separated from the sub-products (peel, core, tops, and tails). The pulp was not submitted to any heat treatment. The sub-products and the juice expressed from them, were submitted to a blanching process (95 degrees C for 1 min). After separating the juice, the bagasse and pulp were analyzed for residues of diuron and benomyl by high performance liquid chromatography, and for residues of vamidothion and methyl parathion by gas chromatography using a TSD detector. No residues of benomyl, diuron, vamidothion, or methyl parathion were detected in the pulp within the quantification limits of the methods (0.1 mg/kg, 0.1 mg/kg, 0.005 mg/kg, and 0.005 mg/kg, respectively). Only methyl parathion (0.052 mg/kg) and vamidothion (0.021 mg/kg) were detected in the bagasse. The presence of these residues in the bagasse was probably due to the action of the wax found in the peel, which prevented the methyl parathion and vamidothion from dissolving in the juice. According to these results, the pulp was fit for human consumption, as far as pesticide residues were concerned, and the bagasse was fit for animal feed and similar applications, because the residual levels found were below the limits established for these compounds.

Comparison of solid-phase extraction and micro-solid-phase extraction for liquid chromatography/mass spectrometry analysis of pesticides in water samples.

Our recent on-line solid-phase extraction (SPE) device for micro-liquid chromatography, known as micro-solid-phase extraction (microSPE), was compared with traditional SPE for the analysis, from aqueous samples, of 4 pesticides belonging to different classes. Two different kinds of adsorbents, C18 and graphitized carbon black, were tested. A 2-stage ion trap mass spectrometer, equipped with homemade microflow electrospray ion (ESI) source, was used. Detection limits with a signal-to-noise ratio of 3:1 for both extraction methods were in the range of 0.1 microg/L for all compounds. However, better recoveries were obtained when microSPE traps were used.

Automated method for cleanup and determination of benomyl and thiabendazole in table-ready foods.

An automated solid-phase extraction (SPE) cleanup with on-line liquid chromatographic (LC) analysis was developed to determine residues of benomyl (as carbendazim) and thiabendazole in table-ready food items from the U.S. Food and Drug Administration Total Diet Study (TDS). A strong-cation-exchange cleanup of an acetone extract replaces the methylene chloride solvent partitioning steps in the procedure described in the Pesticide Analytical Manual (PAM). LC analysis is accomplished with a C8 analytical column and tandem fluorescence and UV detection. Recoveries of both analytes from 32 representative TDS foods fortified at 0.05 and 0.5 microgram/g were determined. Method precision was evaluated with triplicate recovery assays on 11 foods fortified at both levels. Accuracy was tested further by assaying 47 foods for incurred residues in parallel with the validated PAM procedure for comparison, and good agreement was found. The automated SPE method reduces solvent consumption, analysis time, and labor.

Determination of benomyl, diphenyl, o-phenylphenol, thiabendazole, chlorpyrifos, methidathion, and methyl parathion in oranges by solid-phase extraction, liquid chromatography, and gas chromatography.

A simple and rapid method was developed for determination of benomyl, diphenyl (DP), o-phenylphenol (OPP), thiabendazole (TBZ), chlorpyrifos, methidathion, and methyl parathion in whole oranges. These compounds were extracted from a mixture of samples and anhydrous sodium acetate with ethyl acetate. The ethyl acetate extract was concentrated and cleaned up by passing through tandem solid-phase extraction columns consisting of anion-exchange and primary/secondary amine bonded silica. The eluate was concentrated and volume was adjusted with methanol for subsequent liquid chromatography (LC) and gas chromatography (GC). Benomyl (as methyl-2-benzimidazole carbamate, MBC), DP, OPP, and TBZ residues were determined by LC with fluorescence detection. Recoveries at 3 fortified levels (0.1, 1, and 10 micrograms/g) ranged from 63.9 to 97.4%, with coefficients of variation (CVs) of 1.6 to 15.5%. Limits of detection (LODs) were 0.01 microgram/g for DP, OPP, TBZ and 0.05 microgram/g for benomyl. Chlorpyrifos, methidathion, and methyl parathion residues were determined by GC with flame photometric detection. Recoveries ranged from 90.4 to 97.0%, with CVs of 2.1 to 5.9%. LODs were 0.005 microgram/g for chlorpyrifos and methyl parathion, and 0.01 microgram/g for methidathion.

Monitoring of domestic and imported apples and rice by the U.S. Food and Drug Administration pesticide program.

In 1993-94, the U.S. Food and Drug Administration (FDA) conducted a statistically based study of pesticide residues in domestic and imported fresh apples and processed rice. For apples, 769 domestic and 1062 imported samples were collected and analyzed; 85% of the domestic and 86% of the imported samples had detectable residues. Benomyl, a widely used fungicide, was found with greatest frequency in domestic apples, while diphenylamine was found most often in imported apples. One domestic and 4 imported samples contained violative residues of pesticides for which there are no U.S. tolerances on apples. The statistically weighted (by domestic packer throughput or import shipment size) violation rates for domestic and imported apples were 0.30% (0.13 unweighted) and 0.41% (0.38 unweighted), respectively. For rice, 598 domestic and 612 imported samples were collected and analyzed; 56% of the domestic and 12% of the imported samples had detectable residues. Malathion had the greatest frequency of occurrence in both groups of rice. Eight domestic and 9 imported samples were violative, all as a result of use of pesticides for which there are no U.S. tolerances on rice. The statistically weighted violation rates for domestic and imported rice were 0.43% (1.3 unweighted) and 1.1% (1.5 unweighted), respectively. Results of the statistically based study show that, as in FDA's regulatory monitoring, the levels of most pesticide residues found in these 2 commodities are generally well below U.S. tolerances, and few violative residues are found.

High speed liquid chromatography of pesticides.

High speed liquid chromatography has just begun to be explored as an analytical technique for pesticides, particularly residues. It is the intent of this article to provide a comprehensive review of pesticide related applications, point out possibilities for better utilization of existing columns, describe some of the more promising experimental detectors and suggest approaches which could lead to the development of practical analytical methods.

Pesticide residues in products of plant origin in the European Union. Sampling strategy and results from the co-ordinated EU monitoring programmes in 1996 and 1997.

The results of a co-ordinated monitoring programme for pesticide residues in the European Union and Norway carried out in 1996 and 1997 are presented. The aim of this programme is to work towards a system, which makes it possible to estimate actual dietary pesticide intake for the population of the European Union. Based on a statistically dérived sampling plan and within the limited number of pesticides/commodities analysed, the most critical pesticides (benomyl group and dithiocarbamates) and commodities (mandarine and lettuce) were identified. In case of detected non-compliances, repeated sampling and, if necessary, enforcement actions are to be taken by national authorities. The programme will be continued in the next years.

Effects of ozone microbubble treatment on removal of residual pesticides and quality of persimmon leaves.

This study investigated the effects of ozone microbubble (OMCB) treatment on the removal of residual fenitrothion (FT) and benomyl pesticides from red and green persimmon leaves, and also the treatment effect on the leaf colours, physical properties and flavour. The continuous bubbling OMCB treatment was more effective than the non-bubbling OMCB treatments at reducing the FT and benomyl agricultural pesticide residues from both the red and green persimmon leaves. Moreover, the bubbling OMCB treatment had no effect on the colour and pulling strength of the leaves. These results indicate that the treatment by bubbling OMCB is an extremely effective method for removing the residues of FT and benomyl in persimmon leaves and has relatively little effect on leaf quality characteristics.