Cartilage-like protein hydrogels engineered via entanglement.

Load-bearing tissues, such as muscle and cartilage, exhibit high elasticity, high toughness and fast recovery, but have different stiffness (with cartilage being significantly stiffer than muscle)1-8. Muscle achieves its toughness through finely controlled forced domain unfolding-refolding in the muscle protein titin, whereas articular cartilage achieves its high stiffness and toughness through an entangled network comprising collagen and proteoglycans. Advancements in protein mechanics and engineering have made it possible to engineer titin-mimetic elastomeric proteins and soft protein biomaterials thereof to mimic the passive elasticity of muscle9-11. However, it is more challenging to engineer highly stiff and tough protein biomaterials to mimic stiff tissues such as cartilage, or develop stiff synthetic matrices for cartilage stem and progenitor cell differentiation12. Here we report the use of chain entanglements to significantly stiffen protein-based hydrogels without compromising their toughness. By introducing chain entanglements13 into the hydrogel network made of folded elastomeric proteins, we are able to engineer highly stiff and tough protein hydrogels, which seamlessly combine mutually incompatible mechanical properties, including high stiffness, high toughness, fast recovery and ultrahigh compressive strength, effectively converting soft protein biomaterials into stiff and tough materials exhibiting mechanical properties close to those of cartilage. Our study provides a general route towards engineering protein-based, stiff and tough biomaterials, which will find applications in biomedical engineering, such as osteochondral defect repair, and material sciences and engineering.

Brushing Up on Cartilage Lubrication: Polyelectrolyte-Enhanced Tribological Rehydration.

This study presents new insights into the potential role of polyelectrolyte interfaces in regulating low friction and interstitial fluid pressurization of cartilage. Polymer brushes composed of hydrophilic 3-sulfopropyl methacrylate potassium salt (SPMK) tethered to a PEEK substrate (SPMK-g-PEEK) are a compelling biomimetic solution for interfacing with cartilage, inspired by the natural lubricating biopolyelectrolyte constituents of synovial fluid. These SPMK-g-PEEK surfaces exhibit a hydrated compliant layer approximately 5 µm thick, demonstrating the ability to maintain low friction coefficients (µ ∼ 0.01) across a wide speed range (0.1-200 mm/s) under physiological loads (0.75-1.2 MPa). A novel polyelectrolyte-enhanced tribological rehydration mechanism is elucidated, capable of recovering up to ∼12% cartilage strain and subsequently facilitating cartilage interstitial fluid recovery, under loads ranging from 0.25 to 2.21 MPa. This is attributed to the combined effects of fluid confinement within the contact gap and the enhanced elastohydrodynamic behavior of polymer brushes. Contrary to conventional theories that emphasize interstitial fluid pressurization in regulating cartilage lubrication, this work demonstrates that SPMK-g-PEEK's frictional behavior with cartilage is independent of these factors and provides unabating aqueous lubrication. Polyelectrolyte-enhanced tribological rehydration can occur within a static contact area and operates independently of known mechanisms of cartilage interstitial fluid recovery established for converging or migrating cartilage contacts. These findings challenge existing paradigms, proposing a novel polyelectrolyte-cartilage tribological mechanism not exclusively reliant on interstitial fluid pressurization or cartilage contact geometry. The implications of this research extend to a broader understanding of synovial joint lubrication, offering insights into the development of joint replacement materials that more accurately replicate the natural functionality of cartilage.

Cartilage-Inspired, High-Strength, and Heat-Tolerant Lubricating Hydrogels by Macrophase Separation.

Hydrogels are considered as a potential cartilage replacement material based on their structure being similar to natural cartilage, which are of great significance in repairing cartilage defects. However, it is difficult for the existing hydrogels to combine the high load bearing and low friction properties (37 °C) of cartilage through sample methods. Herein, we report a facile and new fabrication strategy to construct the PNIPAm/EYL hydrogel by using the macrophase separation of supersaturated N-isopropylacrylamide (NIPAm) monomer solution to promote the formation of liposomes from egg yolk lecithin (EYL) and asymmetric template method. The PNIPAm/EYL hydrogels possess a relatively high compressive strength (more than 12 MPa), fracture energy (9820 J/m2), good fatigue resistance, lubricating properties, and excellent biocompatibility. Compared with the PNIPAm hydrogel, the friction coefficient (COF 0.046) of PNIPAm/EYL hydrogel is reduced by 50%. More importantly, the COF (0.056) of PNIPAm/EYL hydrogel above lower critical solution temperature (LCST) does not increase significantly, exhibiting heat-tolerant lubricity. The finite element analysis further proves that PNIPAm/EYL hydrogel can effectively disperse the applied stress and dissipate energy under load conditions. This work not only provides new insights for the design of high-strength lubricating hydrogels but also lays a foundation for the treatment of cartilage injury as a substitute material.

Effect of high in comparison to low dairy intake intervention on markers of bone and cartilage remodeling and phosphate metabolism in healthy adults with overweight.

BACKGROUND: In the ageing population, issues with bone and joint health are highly prevalent. Both beneficial and potential risks of dairy products on bone and joint health are reported in epidemiological studies. Furthermore, the phosphorus (P) load from dairy could potentially lead to unfavorable changes in P metabolism. OBJECTIVE: To investigate the effect of dairy intake on markers of bone and joint metabolism and P metabolism in an intervention study with high and low dairy intake. METHODS: In a post hoc analysis of a randomized cross-over trial with overweight adults, the effect of a standardized high dairy intake [HDI (5-6 dairy portions per day) versus low dairy intake (LDI, ≤ 1 dairy portion/day)] for 6 weeks on markers of bone and joint health was assessed using enzyme-linked immunosorbent assays and electrochemiluminescence immunoassays. Markers indicative for cartilage breakdown, including urinary CTX-II, serum COMP and 4-hydroxyproline, and markers indicative for bone remodeling, such as serum CTX-I, PTH, 25(OH)D, osteocalcin, P1NP and FGF23, were investigated using linear mixed models. Furthermore, changes in P metabolism, including the main phosphate-regulating hormone FGF23 were explored. RESULTS: This study was completed by 46 adults (57% female, age 59 ± 4 years, BMI 28 ± 2 kg/m2). Following HDI, markers such as urinary CTX-II excretion, COMP, 25(OH)D, PTH and CTX-I were significantly lower after HDI, as compared to LDI. For example, CTX-II excretion was 1688 ng/24 h at HDI, while it was 2050 ng/24 h at LDI (p < 0.001). Concurrently, P intake was higher at HDI than at LDI (2090 vs 1313 mg/day, p < 0.001). While plasma P levels did not differ (1.03 vs 1.04 mmol/L in LDI, p = 0.36), urinary P excretion was higher at HDI than at LDI (31 vs 28 mmol/L, p = 0.04). FGF23 levels tended to be higher at HDI than at LDI (76.3 vs. 72.9 RU/mL, p = 0.07). CONCLUSIONS: HDI, as compared to LDI, reduced markers that are indicative for joint and bone resorption and bone turnover. No changes in P metabolism were observed. CLINICAL TRIAL REGISTRY: This trial was registered at https://trialsearch.who.int/Trial2.aspx?TrialID=NTR4899 as NTR4899.

Complex-Type N-Glycans Are Associated with Cartilage Degeneration within Different Loading Sites of the Tibial Plateau for Knee Osteoarthritis Patients.

Abnormal N-glycosylation has been shown to play an important role in the pathogenesis of multiple diseases. However, little is known about the relationship between N-glycosylation and knee osteoarthritis (KOA) progression at the tissue level. Thus, the aim of this study was to quantify the cartilage histomorphometric changes in formalin-fixed paraffin-embedded (FFPE) tissue collected from the lateral and medial compartments of the tibial plateau KOA patients (n = 8). Subsequently, N-glycans were analyzed by matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) followed by in situ MS/MS fragmentation. Overall, the Osteoarthritis Research Society International (OARSI) histological grade and cartilage surface fibrillation index were significantly higher, and chondrocyte size in the superficial zone was much larger, for the medial high-loaded cartilage compared to the lateral less-loaded cartilage. Among 92 putative N-glycans observed by MALDI-MSI, 3 complex-type N-glycans, (Hex)4(HexNAc)3, (Hex)4(HexNAc)4, and (Hex)5(HexNAc)4, and 1 oligomannose-type N-glycan, (Hex)9(HexNAc)2, were significantly higher in intensity in the medial cartilage compared to the lateral cartilage, whereas 2 tetra-antennary fucosylated-type N-glycans, (Hex)3(HexNAc)6(Fuc)2 and (Hex)3(HexNAc)6(Fuc)3, were significantly higher in intensity in the lateral cartilage than the medial cartilage. Our findings indicate that complex-type N-glycans are associated with higher severity of cartilage degeneration and may influence the cellular processes of KOA.

Enzymatic mineralization generates ultrastiff and tough hydrogels with tunable mechanics.

The cartilage and skin of animals, which are made up of more than fifty per cent water, are rather stiff (having elastic moduli of up to 100 megapascals) as well as tough and hard to break (with fracture energies of up to 9,000 joules per square metre). Such features make these biological materials mechanically superior to existing synthetic hydrogels. Lately, progress has been made in synthesizing tough hydrogels, with double-network hydrogels achieving the toughness of skin and inorganic-organic composites showing even better performance. However, these materials owe their toughness to high stretchability; in terms of stiffness, synthetic hydrogels cannot compete with their natural counterparts, with the best examples having elastic moduli of just 10 megapascals or less. Previously, we described the enzyme-induced precipitation and crystallization of hydrogels containing calcium carbonate, but the resulting materials were brittle. Here we report the enzyme-induced formation of amorphous calcium phosphate nanostructures that are homogenously distributed within polymer hydrogels. Our best materials have fracture energies of 1,300 joules per square metre even in their fully water-swollen state-a value superior to that of most known water-swollen synthetic materials. We are also able to modulate their stiffness up to 440 megapascals, well beyond that of cartilage and skin. Furthermore, the highly filled composite materials can be designed to be optically transparent and to retain most of their stretchability even when notched. We show that percolation drives the mechanical properties, particularly the high stiffness, of our uniformly mineralized hydrogels.

Isolation and Biochemical Properties of Type II Collagen from Blue Shark (Prionace glauca) Cartilage.

Numerous studies have shown that type II collagen (CII) has a potential role in the treatment of rheumatoid arthritis. However, most of the current studies have used terrestrial animal cartilage as a source of CII extraction, with fewer studies involving marine organisms. Based on this background, collagen (BSCII) was isolated from blue shark (Prionace glauca) cartilage by pepsin hydrolysis and its biochemical properties including protein pattern, total sugar content, microstructure, amino acid composition, spectral characteristics and thermal stability were further investigated in the present study. The SDS-PAGE results confirmed the typical characteristic of CII, comprising three identical α1 chains and its dimeric ß chain. BSCII had the fibrous microstructure typical of collagen and an amino acid composition represented by high glycine content. BSCII had the typical UV and FTIR spectral characteristics of collagen. Further analysis revealed that BSCII had a high purity, while its secondary structure comprised 26.98% of ß-sheet, 35.60% of ß-turn, 37.41% of the random coil and no α-helix. CD spectra showed the triple helical structure of BSCII. The total sugar content, denaturation temperature and melting temperature of BSCII were (4.20 ± 0.03)%, 42 °C and 49 °C, respectively. SEM and AFM images confirmed a fibrillar and porous structure of collagen and denser fibrous bundles formed at higher concentrations. Overall, CII was successfully extracted from blue shark cartilage in the present study, and its molecular structure was intact. Therefore, blue shark cartilage could serve as a potential source for CII extraction with applications in biomedicine.

microRNA-seq of cartilage reveals an overabundance of miR-140-3p which contains functional isomiRs.

miR-140 is selectively expressed in cartilage. Deletion of the entire Mir140 locus in mice results in growth retardation and early-onset osteoarthritis-like pathology; however, the relative contribution of miR-140-5p or miR-140-3p to the phenotype remains to be determined. An unbiased small RNA sequencing approach identified miR-140-3p as significantly more abundant (>10-fold) than miR-140-5p in human cartilage. Analysis of these data identified multiple miR-140-3p isomiRs differing from the miRBase annotation at both the 5' and 3' end, with >99% having one of two seed sequences (5' bases 2-8). Canonical (miR-140-3p.2) and shifted (miR-140-3p.1) seed isomiRs were overexpressed in chondrocytes and transcriptomics performed to identify targets. miR-140-3p.1 and miR-140-3p.2 significantly down-regulated 694 and 238 genes, respectively, of which only 162 genes were commonly down-regulated. IsomiR targets were validated using 3'UTR luciferase assays. miR-140-3p.1 targets were enriched within up-regulated genes in rib chondrocytes of Mir140-null mice and within down-regulated genes during human chondrogenesis. Finally, through imputing the expression of miR-140 from the expression of the host gene WWP2 in 124 previously published data sets, an inverse correlation with miR-140-3p.1 predicted targets was identified. Together these data suggest the novel seed containing isomiR miR-140-3p.1 is more functional than original consensus miR-140-3p seed containing isomiR.

Mass spectrometry imaging spatially identifies complex-type N-glycans as putative cartilage degradation markers in human knee osteoarthritis tissue.

N-Glycan alterations contribute to the pathophysiology and progression of various diseases. However, the involvement of N-glycans in knee osteoarthritis (KOA) progression at the tissue level, especially within articular cartilage, is still poorly understood. Thus, the aim of this study was to spatially map and identify KOA-specific N-glycans from formalin-fixed paraffin-embedded (FFPE) osteochondral tissue of the tibial plateau relative to cadaveric control (CTL) tissues. Human FFPE osteochondral tissues from end-stage KOA patients (n=3) and CTL individuals (n=3), aged >55 years old, were analyzed by matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Overall, it was revealed that 22 N-glycans were found in the cartilage region of KOA and CTL tissue. Of those, 15 N-glycans were more prominent in KOA cartilage than CTL cartilage. We then compared sub-regions of KOA and CTL tissues based on the Osteoarthritis Research Society International (OARSI) histopathological grade (1 to 6), where 1 is an intact cartilage surface and 6 is cartilage surface deformation. Interestingly, three specific complex-type N-glycans, (Hex)4(HexNAc)3, (Hex)4(HexNAc)4, and (Hex)5(HexNAc)4, were found to be localized to the superficial fibrillated zone of degraded cartilage (KOA OARSI 2.5-4), compared to adjacent cartilage with less degradation (KOA OARSI 1-2) or relatively healthy cartilage (CTL OARSI 1-2). Our results demonstrate that N-glycans specific to degraded cartilage in KOA patients have been identified at the tissue level for the first time. The presence of these N-glycans could further be evaluated as potential diagnostic and prognostic biomarkers.

Preparation and Characterization of Nano-Selenium Decorated by Chondroitin Sulfate Derived from Shark Cartilage and Investigation on Its Antioxidant Activity.

In the present study, a selenium-chondroitin sulfate (SeCS) was synthesized by the sodium selenite (Na2SeO3) and ascorbic acid (Vc) redox reaction using chondroitin sulfate derived from shark cartilage as a template, and characterized by SEM, SEM-EDS, FTIR and XRD. Meanwhile, its stability was investigated at different conditions of pH and temperatures. Besides, its antioxidant activity was further determined by the DPPH and ABTS assays. The results showed the SeCS with the smallest particle size of 131.3 ± 4.4 nm and selenium content of 33.18% was obtained under the optimal condition (CS concentration of 0.1 mg/mL, mass ratio of Na2SeO3 to Vc of 1:8, the reaction time of 3 h, and the reaction temperature of 25 °C). SEM image showed the SeCS was an individual and spherical nanostructure and its structure was evidenced by FTIR and XRD. Meanwhile, SeCS remained stable at an alkaline pH and possessed good storage stability at 4 °C for 28 days. The results on scavenging free radical levels showed that SeCS exhibited significantly higher antioxidant activity than SeNPs and CS, indicating that SeCS had a potential antioxidant effect.

Preprocessing Strategies for Sparse Infrared Spectroscopy: A Case Study on Cartilage Diagnostics.

The aim of the study was to optimize preprocessing of sparse infrared spectral data. The sparse data were obtained by reducing broadband Fourier transform infrared attenuated total reflectance spectra of bovine and human cartilage, as well as of simulated spectral data, comprising several thousand spectral variables into datasets comprising only seven spectral variables. Different preprocessing approaches were compared, including simple baseline correction and normalization procedures, and model-based preprocessing, such as multiplicative signal correction (MSC). The optimal preprocessing was selected based on the quality of classification models established by partial least squares discriminant analysis for discriminating healthy and damaged cartilage samples. The best results for the sparse data were obtained by preprocessing using a baseline offset correction at 1800 cm-1, followed by peak normalization at 850 cm-1 and preprocessing by MSC.

Strategies to Control or Mimic Growth Factor Activity for Bone, Cartilage, and Osteochondral Tissue Engineering.

Growth factors play a critical role in tissue repair and regeneration. However, their clinical success is limited by their low stability, short half-life, and rapid diffusion from the delivery site. Supraphysiological growth factor concentrations are often required to demonstrate efficacy but can lead to adverse reactions, such as inflammatory complications and increased cancer risk. These issues have motivated the development of delivery systems that enable sustained release and controlled presentation of growth factors. This review specifically focuses on bioconjugation strategies to enhance growth factor activity for bone, cartilage, and osteochondral applications. We describe approaches to localize growth factors using noncovalent and covalent methods, bind growth factors via peptides, and mimic growth factor function with mimetic peptide sequences. We also discuss emerging and future directions to control spatiotemporal growth factor delivery to improve functional tissue repair and regeneration.

Gelatin-coated indium tin oxide slides improve human cartilage-bone tissue adherence and N-glycan signal intensity for mass spectrometry imaging.

Matrix-assisted laser desorption/ionisation mass spectrometry imaging (MALDI-MSI) has been successfully used to elucidate the relative abundance and spatial mapping of analytes in situ. Currently, sample preparation workflows for soft formalin-fixed paraffin-embedded (FFPE) tissues, such as brain, liver, kidney, and heart, have been successfully developed. However, hard tissues, such as cartilage-bone, tooth, and whole mouse body, have resulted in the loss of morphology or tissue during the heat-induced epitope retrieval (HIER) step on commercially available conductive indium tin oxide (ITO) slides. Therefore, we have successfully developed a novel and cost-effective sample preparation workflow in which commercial conductive ITO slides are pre-coated with gelatin and chromium potassium sulfate dodecahydrate to improve the adherence of FFPE human osteoarthritic cartilage-bone tissue sections. Gelatin-coated ITO slides also resulted in overall higher N-glycan signal intensity for not only FFPE osteoarthritic cartilage-bone tissue but also for FFPE hard-boiled egg white used as a quality control to assess the quality of sample preparation and MALDI-MSI acquisition. In summary, we present a novel straightforward workflow to improve slide adherence and morphological preservation of FFPE cartilage-bone tissue sections during HIER while improving the signal intensity of N-glycans spatially mapped from the same tissue sections by MALDI-MSI.

Nuclear relaxation rate enhancement by a 14N quadrupole nucleus in a fluctuating electric-field gradient.

We consider the longitudinal quadrupole relaxation rate enhancement (QRE) of a 1H nucleus due to the time fluctuations of the local dipolar magnetic field created by a close quadrupole 14N nucleus, the electric-field gradient (EFG) Hamiltonian of which changes with time because of vibrations/distortions of its chemical environment. The QRE is analytically expressed as a linear combination of the cosine Fourier transforms of the three quantum time auto-correlation functions GAA(t) of the 14N spin components along the principal axes A = X, Y, and Z of the mean (time-averaged) EFG Hamiltonian. Denoting the three transition frequencies between the energy levels of this mean Hamiltonian by νA, the functions GAA(t) oscillate at frequencies νA + sA/(2π) with mono-exponential decays of relaxation times τA, where the frequency dynamic shifts sA and the relaxation times τA are closed expressions of the magnitude of the fluctuations of the instantaneous EFG Hamiltonian about its mean and of the characteristic fluctuation time. Thus, the theoretical QRE is the sum of three Lorentzian peaks centered at νA + sA/(2π) with full widths at half maxima 1/(πτA). The predicted peak widths are nearly equal. The predicted dynamic shifts of the peaks are much smaller than their widths and amazingly keep proportional to the transition frequencies νA for reasonably fast EFG fluctuations. The theory is further improved by correcting the transition frequencies by the 14N Zeeman effects of second order. It is successfully applied to reinterpret the QRE pattern measured by Broche, Ashcroft, and Lurie [Magn. Reson. Med. 68, 358 (2012)] in normal cartilage.

Fabrication and characterization of microstructure-controllable COL-HA-PVA hydrogels for cartilage repair.

Polyvinyl alcohol (PVA) hydrogel has gained interest in cartilage repair because of its highly swollen, porosity, and viscoelastic properties. However, PVA has some deficiencies, such as its poor biocompatibility and microstructure. This research aimed to design novel hydroxyapatite (HA)-collagen (COL)-PVA hydrogels. COL was added to improve cell biocompatibility, and the microstructure of the hydrogels was controlled by fused deposition modeling (FDM). The feasibility of the COL-HA-PVA hydrogels in cartilage repair was evaluated by in vitro and in vivo experiments. The scanning electron microscopy results showed that the hybrid hydrogels had interconnected macropore structures that contained a COL reticular scaffold. The diameter of the macropore was 1.08-1.85 mm, which corresponds to the diameter of the denatured PVA column. The chondrocytes were then seeded in hydrogels to assess the cell viability and formation of the cartilage matrix. The in vitro results revealed excellent cellular biocompatibility. Osteochondral defects (8 mm in diameter and 8 mm in depth) were created in the femoral trochlear of goats, and the defects were implanted with cell-seeded hydrogels, cell-free hydrogels, or a blank control. The in vivo results showed that the COL-HA-PVA hydrogels effectively repaired cartilage defects, especially the conditions inoculated with chondrocyte in advance. This research suggests that the COL-HA-PVA hydrogels have promising application in cartilage repair.

Bioprinting Via a Dual-Gel Bioink Based on Poly(Vinyl Alcohol) and Solubilized Extracellular Matrix towards Cartilage Engineering.

Various hydrogel systems have been developed as biomaterial inks for bioprinting, including natural and synthetic polymers. However, the available biomaterial inks, which allow printability, cell viability, and user-defined customization, remains limited. Incorporation of biological extracellular matrix materials into tunable synthetic polymers can merge the benefits of both systems towards versatile materials for biofabrication. The aim of this study was to develop novel, cell compatible dual-component biomaterial inks and bioinks based on poly(vinyl alcohol) (PVA) and solubilized decellularized cartilage matrix (SDCM) hydrogels that can be utilized for cartilage bioprinting. In a first approach, PVA was modified with amine groups (PVA-A), and mixed with SDCM. The printability of the PVA-A/SDCM formulations cross-linked by genipin was evaluated. On the second approach, the PVA was functionalized with cis-5-norbornene-endo-2,3-dicarboxylic anhydride (PVA-Nb) to allow an ultrafast light-curing thiol-ene cross-linking. Comprehensive experiments were conducted to evaluate the influence of the SDCM ratio in mechanical properties, water uptake, swelling, cell viability, and printability of the PVA-based formulations. The studies performed with the PVA-A/SDCM formulations cross-linked by genipin showed printability, but poor shape retention due to slow cross-linking kinetics. On the other hand, the PVA-Nb/SDCM showed good printability. The results showed that incorporation of SDCM into PVA-Nb reduces the compression modulus, enhance cell viability, and bioprintability and modulate the swelling ratio of the resulted hydrogels. Results indicated that PVA-Nb hydrogels containing SDCM could be considered as versatile bioinks for cartilage bioprinting.

Applications of Vibrational Spectroscopy for Analysis of Connective Tissues.

Advances in vibrational spectroscopy have propelled new insights into the molecular composition and structure of biological tissues. In this review, we discuss common modalities and techniques of vibrational spectroscopy, and present key examples to illustrate how they have been applied to enrich the assessment of connective tissues. In particular, we focus on applications of Fourier transform infrared (FTIR), near infrared (NIR) and Raman spectroscopy to assess cartilage and bone properties. We present strengths and limitations of each approach and discuss how the combination of spectrometers with microscopes (hyperspectral imaging) and fiber optic probes have greatly advanced their biomedical applications. We show how these modalities may be used to evaluate virtually any type of sample (ex vivo, in situ or in vivo) and how "spectral fingerprints" can be interpreted to quantify outcomes related to tissue composition and quality. We highlight the unparalleled advantage of vibrational spectroscopy as a label-free and often nondestructive approach to assess properties of the extracellular matrix (ECM) associated with normal, developing, aging, pathological and treated tissues. We believe this review will assist readers not only in better understanding applications of FTIR, NIR and Raman spectroscopy, but also in implementing these approaches for their own research projects.

Tissue Fluid Triggered Enzyme Polymerization for Ultrafast Gelation and Cartilage Repair.

The in situ gelation of injectable precursors is desirable in the field of tissue regeneration, especially in the context of irregular defect filling. The current driving forces for fast gelation include the phase-transition of thermally sensitive copolymers, click chemical reactions with tissue components, and metal coordination effect. However, the rapid formation of tough hydrogels remains a challenge. Inspired by aerobic metabolism, we herein propose a tissue-fluid-triggered cascade enzymatic polymerization process catalyzed by glucose oxidase and ferrous glycinate for the ultrafast gelation of acryloylated chondroitin sulfates and acrylamides. The highly efficient production of carbon radicals and macromolecules contribute to rapid polymerization for soft tissue augmentation in bone defects. The copolymer hydrogel demonstrated the regeneration-promoting capacity of cartilage. As the first example of using artificial enzyme complexes for in situ polymerization, this work offers a biomimetic approach to the design of strength-adjustable hydrogels for bio-implanting and bio-printing applications.

Biocompatible implant mimicking cartilage: A new horizon for reconstructive facial field.

Cartilage is avascular with limited to no regenerative capacity, so its loss could be a challenge for reconstructive surgery. Current treatment options for damaged cartilage are also limited. In this aspect there is a tremendous need to develop an ideal cartilage-mimicking biomaterial that could repair maxillofacial defects. Considering this fact in this study we have prepared twelve silicone-based materials (using Silicone 40, 60, and 80) reinforced with hydroxyapatite, tri-calcium phosphate, and titanium dioxide which itself has proven their efficacy in several studies and able to complement the shortcomings of using silicones. Among the mechanical properties (Young's modulus, tensile strength, percent elongation, and hardness), hardness of Silicone-40 showed similarities with goat ear (P > .05). Silicone peaks have been detected in FTIR. Both AFM morphology and SEM images of the samples confirmed more roughed surfaces. All the materials were nonhemolytic in hemocompatibility tests, but among the twelve materials S2, S3, S5, and S6 showed the least hemolysis. For all tested bacterial strains, adherence was lower on each material than that grown on the plain industrial silicone material which was used as a positive control. S2, S3, S5, and S6 samples were selected as the best based on mechanical characterizations, surface characterizations, in vitro hemocompatibility tests and bacterial adherence activity. So, outcomes of this present study would be promising when developing ideal cartilage-mimicking biocomposites and their emerging applications to treat maxillofacial defects due to cartilage damage.

Enhancement of cartilage extracellular matrix synthesis in Poly(PCL-TMC)urethane scaffolds: a study of oriented dynamic flow in bioreactor.

The development of new technologies to produce three-dimensional and biocompatible scaffolds associated with high-end cell culture techniques have shown to be promising for the regeneration of tissues and organs. Some biomedical devices, as meniscus prosthesis, require high flexibility and tenacity and such features are found in polyurethanes which represent a promising alternative. The Poly(PCL-TMC)urethane here presented, combines the mechanical properties of PCL with the elasticity attributed by TMC and presents great potential as a cellular carrier in cartilage repair. Scanning electron microscopy showed the presence of interconnected pores in the three-dimensional structure of the material. The scaffolds were submitted to proliferation and cell differentiation assays by culturing mesenchymal stem cells in bioreactor. The tests were performed in dynamic flow mode at the rate of 0.4 mL/min. Laser scanning confocal microscopy analysis showed that the flow rate promoted cell growth and cartilage ECM synthesis of aggrecan and type II collagen within the Poly(PCL-TMC)urethane scaffolds. This study demonstrated the applicability of the polymer as a cellular carrier in tissue engineering, as well as the ECM was incremented only when under oriented flow rate stimuli. Therefore, our results may also provide data on how oriented flow rate in dynamic bioreactors culture can influence cell activity towards cartilage ECM synthesis even when specific molecular stimuli are not present. This work addresses new perspectives for future clinical applications in cartilage tissue engineering when the molecular factors resources could be scarce for assorted reasons.