Root surface roughness evaluation following application of different periodontal instruments and Er:YAG laser: A profilometry and SEM study.

AIM: The aim of the present study was to evaluate the efficacy of 30°-angled Er:YAG laser tip and different periodontal instruments on root surface roughness and morphology in vitro. METHODS: Eighteen bovine teeth root without carious lesion were decoronated from the cementoenamel junction and seperated longitidunally. A total of 36 obtained blocks were mounted in resin blocks and polished with silicon carbide papers under water irrigation. These blocks were randomly assigned into 3 treatment groups. In Group 1, 30°-angled Er:YAG laser (2.94 µm) tip was applied onto the blocks with a 20 Hz, 120 mJ energy output under water irrigation for 20 s. In Groups 2 and 3, the same treatment was applied to the blocks with new generation ultrasonic tip and conventional curette apico-coronally for 20 s with a sweeping motion. Surface roughness and morphology were evaluated before and after instrumentation with a profilometer and SEM, respectively. RESULTS: After instrumentation, profilometric analysis revealed significantly higher roughness values compared to baseline in all treatment groups(p < 0.05). Laser group revealed the roughest surface morphology followed by conventional curette and new generation ultrasonic tip treatment groups (p < 0.05). In SEM analysis, irregular surfaces and crater defects were seen more frequently in the laser group. CONCLUSION: Results of the study showed that the use of new generation ultrasonic tip was associated with smoother surface morphology compared to 30°-angled Er-YAG laser tip and conventional curette. Further in vitro and in vivo studies with an increased sample size are necessary to support the present study findings.

Sixty-month comperative evaluation of a glass hybrid restorative and a composite resin in non-carious cervical lesions of bruxist individuals.

OBJECTIVE: To compare the clinical performance of a glass hybrid (GH) restorative and a nano-ceramic composite resin (CR) in the restoration of non-carious cervical lesions (NCCLs) of bruxist individuals in a 60-month randomized clinical trial. MATERIALS AND METHODS: Twenty-five bruxist candidates having NCCLs were recruited in this clinical study. The depth, height (cervico-incisal), width (mesio-distal), internal angles of the NCCLs, degree of tooth wear (TWI) and gingival index (GI) were measured. One hundred-and-forty-eight NCCLs were restored either with a GH restorative (Equia Forte Fil) or a CR (Ceram.X One Universal). Modified USPHS criteria was used to evaluate restorations after 1 week and 12, 24, 36 and 60 months. Pearson's Chi-Square, Fisher's Exact and Cochran Q tests were run for analysis. Survival rates of the restorations were compared with Kaplan-Meier analysis (p < 0.05). RESULTS: After 60 months, 97 restorations in 15 patients were examined. The recall rate was 60.0%. Retention rates were 73.5% for CR and 66.7% for GH. A total of 29 restorations were lost (13CR (26.5%), 16GH (33.3%)). There was not a significant difference between tested restoratives in retention (p = 0.464), marginal adaptation (p = 0.856) and marginal discoloration (p = 0.273). There was no relationship between internal angle, depth, height or width and retention of the GH or CR restorations (p > 0.05). The increase in retention loss and marginal discoloration of both restorations over time were significant (p < 0.001). Sensitivity or secondary caries were not detected after 60 months. CONCLUSION: GH and nano-ceramic CR showed similar clinical performances in NCCLs after 60 months in patients with bruxism. CLINICAL SIGNIFICANCE: After 60 months, CR and GH materials showed clinically acceptable performances in restoration of NCCLs in patients with bruxism.

Sandblasting increases the microtensile bond strength between resin and sclerotic dentin in noncarious cervical lesions.

PURPOSE: To evaluate the effect of sandblasting on the microtensile strength between sclerotic dentin and resin composite. METHODS: 32 premolars with noncarious cervical lesions (NCCLs) were collected, and the teeth were randomly assigned to the control group (C group) and the sandblasted group (S group). Teeth in the S group were sandblasted with 110 µm Al2O3 particles at a pressure of 75 psi, while those in the C group received no further treatment. The characteristics of the tooth surface were observed by scanning electron microscopy (SEM), and the relative area of open dentin tubules (OTs) was calculated by IPP6.0 software. Surface roughness (Ra) was also assessed. The noncarious cervical lesions of all teeth were restored with a resin composite and subsequently sectioned into sticks to measure the microtensile bond strength (µTBS). RESULTS: The mean ± SD µTBS (in MPa) of the sandblasted group was 17.9 ± 0.69 and 14.23 ± 0.44 in the control group (P< 0.05). The relative area of OTs at the gingival wall of the sandblasted group was 69.74 ± 5.23%, and 47.24 ± 7.67% in the control group (P< 0.05). The average surface roughness (µm) was 1.01 ± 0.05 in the sandblasted group and 0.16 ± 0.03 in the control group. Sandblasting could increase the bond strength of sclerotic dentin and resin restorations. CLINICAL SIGNIFICANCE: After sandblasting, the microtensile strength of sclerotic dentin on the surface of noncarious cervical lesions increased, prolonging the resin adhesion longevity. Sandblasting could also alleviate the pain of patients during the treatment process and achieve a minimally invasive treatment.

Effects of occlusal wear on 16-year progression of non-carious cervical lesions-Results of the study of health in Pomerania (SHIP-START).

BACKGROUND: It is still discussed whether occlusal wear (OW) affects the formation of non-carious cervical lesions (NCCLs). OBJECTIVE: To estimate effects of OW on the presence and development of NCCLs, using 16-year follow-up data from a cohort study. METHODS: Occlusal and cervical defects were measured in 728 cast models (one from the upper jaw and one from the lower jaw) of 364 participants. Adjusted mixed-effects ordinal logistic models analysing estimated cross-sectional (N = 1308 teeth/291 subjects) and longitudinal (N = 718 teeth/226 subjects) associations of OW with NCCLs using tooth level data. RESULTS: OW size was cross-sectionally (OR = 1.74; 95% CI: 1.27-2.38 for OW size; OR = 0.97; 95% CI: 0.94-0.99 for squared OW size), but not longitudinally (OR = 1.14; 95% CI: 0.99-1.30) associated with odds of higher NCCL sizes. For cross-sectional analyses, predicted probabilities of an NCCL size of 0 decreased from about 0.996 to 0.010 for OW sizes of 0 to 25. CONCLUSION: Results suggest an association between OW and NCCL size. However, as longitudinal results were non-significant, while consistent in direction, large-scaled cohort studies are demanded to more precisely estimate effect strength.

Cone beam computed tomography assessment of maxillary anterior teeth cervix dimensions in healthy adults for optimal anatomic healing abutments.

OBJECTIVES: The abutments produced with circular symmetry failed to accurately replicate the natural teeth's cervical shapes. The purpose of this study was to measure cervical cross-sections of maxillary anterior teeth using cone beam computed tomography (CBCT) images to design anatomic healing abutments. MATERIALS AND METHODS: CBCT data of 61 patients were analyzed using Ez3D Plus software. Measurements were taken at the cemento-enamel junction (CEJ) and 1 mm coronal to CEJ for maxillary central incisors, lateral incisors, and canines. Various parameters, including area, perimeter, and eight line segments in the distal (a), disto-palatal (b), palatal (c), mesio-palatal (d), mesial (e), mesio-labial (f), labial (g), and disto-labial (h) directions, were used to describe dental neck contours. The ratios (f/b and h/d) were analyzed, and differences based on sex and dental arch morphology were explored. RESULTS: Significant differences were found in area and perimeter between males and females, but not in f/b and h/d ratios. Differences in the f/b ratio were observed among dental arch morphologies for maxillary central incisors, lateral incisors, and canines. CONCLUSIONS: CBCT measurements of cervical cross-sections provide more accurate data for designing anatomic healing abutments. The fabrication of anatomical healing abutments needs to consider the influence of gender on cervical size and to explore the potential effect of arch shape on cervical morphology. CLINICAL SIGNIFICANCE: The novel method provides detailed measurements for the description of dental cervical contours for patients with bilateral homonymous teeth missing. The measurements of this study could be utilized to design more accurate anatomic healing abutments to create desired morphology of peri-implant soft tissue.

Biometric analysis of furcation area of molar teeth and its relationship with instrumentation.

The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved.Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn't allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

Evaluation of the relationship between periodontal bone destruction and mesial root concavity of the maxillary first premolar.

BACKGROUND: The purpose of this study was to investigate the morphology of maxillary first premolar mesial root concavity and to analyse its relation to periodontal bone loss (BL) using cone beam computed tomography (CBCT) and panoramic radiographs. METHODS: The mesial root concavity of maxillary premolar teeth was analysed via CBCT. The sex and age of the patients, starting position and depth of the root concavity, apicocoronal length of the concavity on the crown or root starting from the cementoenamel junction (CEJ), total apicocoronal length of the concavity, amount of bone loss both in CBCT images and panoramic radiographs, location of the furcation, length of the buccal and palatinal roots, and buccopalatinal cervical root width were measured. RESULTS: A total of 610 patients' CBCT images were examined, and 100 were included in the study. The total number of upper premolar teeth was 200. The patients were aged between 18 and 65 years, with a mean age of 45.21 ± 13.13 years. All the teeth in the study presented mesial root concavity (100%, n = 200). The starting point of concavity was mostly on the cervical third of the root (58.5%). The mean depth and buccolingual length measurements were 0.96 mm and 4.32 mm, respectively. Depth was significantly related to the amount of alveolar bone loss (F = 5.834, p = 0.001). The highest average concavity depth was 1.29 mm in the group with 50% bone loss. The data indicated a significant relationship between the location of the furcation and bone loss (X2 = 25.215, p = 0.003). Bone loss exceeded 50% in 100% of patients in whom the furcation was in the cervical third and in only 9.5% of patients in whom the furcation was in the apical third (p = 0.003). CONCLUSIONS: According to the results of this study, the depth of the mesial root concavity and the coronal position of the furcation may increase the amount of alveolar bone loss. Clinicians should be aware of these anatomical factors to ensure accurate treatment planning and successful patient management.

A 2-Year Randomized Clinical Trial of Three Bonding Techniques in Non-Carious Cervical Lesions.

Background and objective: The aim of this randomized split-mouth study-controlled clinical trial was to compare the 2-year clinical performance of resin composite restorations placed at non-caries cervical lesions (NCCL) with one-step self-etch, total-etch, and selective enamel etch and self-etch adhesive techniques. Materials and methods: Thirty-two patients received three resin composite restorations each at NCCLs (Tetric EvoCeram/Ivoclar/Vivadent), bonded with a total-etch adhesive agent (ExciTE F/Ivoclar/Vivadent) and a self-etch (AdheSE One F/Ivoclar/Vivadent) without and with selective enamel etching. All restorations were evaluated by two examiners at baseline, 6-, 12-, 18-, and 24-months with FDI clinical criteria (post-operation regarding retention, caries occurrence, marginal adaptation, and marginal staining). A logistic regression analysis, a Cohen's kappa statistic, a multifactorial analysis, and X2 were performed with generalized estimating equations. Results: After 2 years, the retention rate was 86.8% for total etch, 92.26% for self-etch, and 93.63% for selective enamel etching and self-etch. No caries was detected on the restorations. Concerning marginal adaptation, the clinically perfect restorations were 26.9% for the total-etch technique, 16% for self-etch, and 25.9% for selective enamel etch and self-etch. The logistic regression model revealed that only time reduced the probability of perfect marginal adaptation. Conclusions: All three adhesive strategies provided restorations with no significant differences in the retention rate or marginal adaptation, whereas the total etch yielded better performance for marginal staining. All restorations were assessed as clinically acceptable after 2 years.

EFFECT OF LOW-LEVEL DIODE LASER ON DENTIN TOPOGRAPHY AND SYMPTOMATIC NONCARIOUS CERVICAL LESIONS PRIOR TO COMPOSITE RESTORATIONS: A SPLIT-MOUTH RANDOMIZED CONTROLLED TRIAL.

OBJECTIVES: This study assessed alterations in sensitivity among symptomatic noncarious cervical lesions (NCCLs) following the application of 3 low-level diode laser wavelengths before composite restoration. It analyzed the changes in dentin topography using a scanning electron microscope (SEM). MATERIALS AND METHODS: Nine patients with 36 NCCLs were randomly assigned intra-individually to 4 groups based on the laser wavelength: laser simulation, 445 nm, 660 nm, and 970 nm. Cavity preparation, irradiation, and composite restoration were performed for each lesion. Sensitivity to cold stimuli was recorded using a visual analog scale (VAS) before the intervention (baseline) and at 1 day, 14 days, 1-, 3-, and 6-month. Pulp sensibility was recorded using an electrical pulp tester (EPT) at baseline, before treatment, and at 3- and 6-month. Additionally, an in vitro examination was performed on 12 extracted human molars to yield 12 dentin discs. Each disc was randomly divided into 4 quadrants to receive the same laser wavelengths to determine the diameters of the tubules using SEM. Results were analyzed statistically for clinical studies by the Friedman test, while ANOVA (RM-ANOVA) was conducted in-vitro, followed by the Bonferroni test in the case of significance (P < .05). RESULTS: VAS readings decreased across all groups, with a significant decrease observed for 660 nm and 970 nm from 14 days to 6-month, while at 445 nm there was a significant decrease at 6-month compared to the control (P < .05). EPT showed a significant decrease in pain threshold levels at 660 nm and 970 nm at 3- and 6-month, while 445 nm showed a significant decrease at 6-month compared to the control (P < .05). The mean tubular diameter at 445 nm decreased, with no significant difference from the control, whereas a significant decrease was found at 660 nm and 970 nm compared to the control (P < .05). CONCLUSIONS: Prior to composite restoration in symptomatic NCCLs, diode lasers with a wavelength of 660 nm showed the highest reduction in sensitivity, followed by 970 nm, whereas 445 nm diode lasers showed the least reduction. Additionally, diode lasers with wavelengths of 660 and 970 nm reduced the width of the dentinal tubules (DT) without inducing melting, as viewed under SEM.

Clinical and radiographic features of external cervical resorption - An observational study.

AIM: To determine the prevalence of symptoms, clinical signs and radiographic presentation of external cervical resorption (ECR). METHODOLOGY: This study involved 215 ECR lesions in 194 patients referred to the Endodontic postgraduate Unit at King's College London or Specialist Endodontic practice (London, UK). The clinical and radiographic findings (periapical [PA] and cone beam computed tomography [CBCT]) were readily accessible for evaluation. A checklist was used for data collection. Inferential analysis was carried out to determine if there was any potential association between type and location of tooth in the jaw as well as sex, age of the patient and ECR presentation and radiographic feature. RESULTS: Eighty-eight patients (94 teeth) were female and 106 patients were male (121 teeth), the mean age (±SD) was 41.5 (±17.7) years. Fifteen patients (7.7%) had more than one ECR lesion. The most affected teeth were maxillary central incisors (21.4% [46 teeth]) and mandibular first molars (10.2% [22 teeth]). ECR was most commonly detected as an incidental radiographic finding in 58.1% [125 teeth] of the cases. ECR presented with symptoms of pulpal/periapical disease in 23.3% [n = 50] and clinical signs (e.g. pink spot, cavitation) in 16.7% [36 teeth] of the cases. Clinical signs such as cavitation (14%), pink spot (5.1%) and discolouration (2.8%) were uncommon, but their incidence increased up to 24.7% when combined with other clinical findings. ECR was detected in the resorptive and reparative phases in 70.2% and 29.8% of the cases respectively. CONCLUSION: ECR appears to be quiescent in nature, the majority being asymptomatic and diagnosed incidentally from PA or CBCT. When assessed with the Patel classification, most lesions were minimal to moderate in relation to their height (1 or 2) and circumferential spread (A or B). However, the majority of ECRs were in (close) proximity to the pulp. Symptoms and clinical signs were associated with (probable) pulp involvement rather than the height and circumferential spread of the lesion. Clinical signs were more frequently associated when ECR affected multiple surfaces.

The prevalence, characteristics, and risk factors of external cervical resorption: a retrospective practice-based study.

OBJECTIVES: External cervical root resorption (ECR) is a poorly understood and aggressive form of resorption. The purpose of this study was to examine the prevalence, characteristics, and risk factors associated with the occurrence of ECR in patients seeking endodontic care from private practice settings. MATERIALS AND METHODS: Records of 343 patients with 390 teeth diagnosed with ECR were identified from 3 private endodontic practices from 2008 to 2022. The patients' demographic information, systemic conditions, and dental history were recorded. The characteristics of the cases including Heithersay classification, pulpal and periapical status, and their management were documented. The association between case severity and potential predisposing factors was examined using chi-square analysis. RESULTS: The overall prevalence of ECR among patients seeking endodontic care was low (< 1%). However, there was a greater than twofold increase in the pooled prevalence from 2016 to 2021 (0.99%) compared to the data from 2010 to 2015 (0.46%). The most commonly affected teeth were anterior teeth (48.7%). Class II (30.0%) and class III (45.4%) defects were the most often identified. Patients with a history of trauma or orthodontic treatment were significantly more likely to be diagnosed with severe cervical resorption (class III or IV) (p < 0.05). CONCLUSIONS: There has been an increase in the prevalence of ECR in patients seeking endodontic care. A history of orthodontic treatment and traumatic dental mechanical injuries may predict the severity of resorption. CLINICAL RELEVANCE: The upward trend in the occurrence of ECR warrants close monitoring of the patients at high risk of developing the condition to facilitate early detection and management.

Current landmarks for gingival thickness evaluation in maxillary anterior teeth: a systematic review.

OBJECTIVES: To identify and report the current landmarks used for measuring gingival thickness (GT) in healthy maxillary anterior teeth. MATERIAL AND METHODS: The protocol of this Preferred Reporting Items of Systematic Reviews and Meta-Analyses (PRISMA) 2020-compliant systematic review was registered in PROSPERO. A literature search was conducted to identify articles that met the eligibility criteria published up to 2022. The methods of assessing gingival thickness and the landmarks adopted on the studies were described. Primary outcomes were identified, and the frequency of reporting in the selected articles was calculated. Additionally, risk-of-bias assessments were performed for individual articles. RESULTS: Fifty-eight articles (34 with low risk of bias and 24 with medium risk of bias) were selected. A total of 3638 individuals had their gingival thickness measured. Thirty-nine different landmarks were adopted in the studies. Fifty-six articles with 22 landmarks were included in the meta-analysis. A higher heterogeneity was found between the studies (GT ranged from 0.48 to 2.59 mm, mean GT 1.074; 95% CI: 1.024-1.104). The 3 most used landmarks were 2 mm from gingival margin (10 studies, mean GT 1.170 mm, 95% CI: 1.085-1.254), bone crest (9 studies, mean GT 1.01 mm; 95% CI: 0.937-1.083), and cemento-enamel junction (7 studies, mean GT 1.172 mm; 95% CI: 1.105, 1.239). CONCLUSIONS: Within the limits of this study, a large heterogeneity in GT was found, and there was no consensus on the ideal landmark for GT measurement. CLINICAL RELEVANCE: The landmark 2 mm from gingival margin, located at attached gingiva, can be used for GT measurement by clinical and image-based devices. This is an important step for a quantitative instead of a qualitative evaluation of phenotypes.

Evaluation of a novel restorative protocol to treat non-carious cervical lesion associated with gingival recession: a 2-year follow-up randomized clinical trial.

OBJECTIVE: To compare 2 different resin composites and 2 adhesive systems used in a new restorative protocol (partial restoration) to treat non-carious cervical lesions associated with gingival recession type 1 (RT1). MATERIAL AND METHODS: Eighty combined defects (CDs) were treated with a partial restoration and periodontal plastic surgery for root coverage. The CDs were randomly assigned to one of the following groups: NP + TE (n = 20), nanofilled composite and 2-step total-etch adhesive system; NP + UA (n = 20), nanofilled composite and universal adhesive system; MH + TE (n = 20), microhybrid composite and 2-step total-etch adhesive; MH + UA (n = 20), microhybrid composite and universal adhesive. Restorations were assessed using the United States Public Health Service (USPHS) criteria at 1 week (baseline) and 6, 12, and 24 months. Survival rate, periodontal parameters, dentin hypersensitivity (DH), and aesthetics were also evaluated. RESULTS: After 24 months, only the MH + TE group did not lose any restoration, with no significant differences between groups. For surface roughness parameter, MH presented 83.3% of the restorations scoring Bravo, whereas NP presented 48.5% of the restorations scoring Bravo. All groups presented restorations with marginal discoloration. All periodontal parameters behaved similarly, regardless of the restorative material. All groups presented significant reductions of dentin hypersensitivity and improved aesthetic perceptions (p < 0.05). CONCLUSION: Both resin composites and adhesives tested can be combined for partial restorations to treat CDs. CLINICAL RELEVANCE: This new restorative-surgical protocol to treat CDs presents satisfactory outcomes. The partial restorations can be successfully executed with both combinations of adhesives and resin composites evaluated in this investigation. TRN : ClinicalTrial.gov: NCT03215615; registration date July 12, 2017.

Evaluation of the dimensional alternation of the alveolar bone in patients with a congenitally missing mandibular lateral incisor using cone-beam computed tomography.

INTRODUCTION: The alveolar bone is an essential consideration when planning treatment for patients with tooth agenesis. This study evaluated the changes in the alveolar bone and adjacent teeth in patients with a congenitally missing mandibular lateral incisor using cone-beam computed tomography. METHODS: Twenty-three nonorthodontically treated adults with a unilateral congenitally missing mandibular lateral incisor were the missing group (M group). The control group (C group) consisted of 23 nonorthodontically treated adults with normal occlusion and no missing teeth. First, the difference in the arch perimeter between the groups was compared at the cementoenamel junction (CEJ) level and the root apex (RA) level. Next, the root divergence of the anterior teeth in the M group was observed. Finally, the alveolar bone thickness ratio was compared between the M and C groups at different vertical levels. RESULTS: The arch perimeter was significantly decreased in the M group at the CEJ and RA levels (P <0.05). Root divergence was observed adjacent to the missing site (P <0.0001). There were a reduction in total and cancellous cortical alveolar bone thickness (ABT) ratios at the 3-, 6-, and 9-mm positions (P <0.05). The buccal cortical ABT ratios decreased at the 3-and 6-mm positions. The lingual ABT ratio increased at the 9-mm position (P <0.05). CONCLUSIONS: The congenitally missing mandibular lateral incisor caused a reduction in the arch perimeter in the CEJ area and the RA area. The root divergences were observed in the teeth adjacent to the missing areas. A significant decrease in the buccal cortical bone and cancellous bone was observed in the missing area.

Age and sex related change in tooth enamel thickness of maxillary incisors measured by cone beam computed tomography.

BACKGROUND: To measure adequate enamel thickness of maxillary incisors in planning enamel reduction for a porcelain laminate veneer restoration in relation to chronological age and sex by using cone beam computed tomography (CBCT) in an Iraqi subpopulation. METHODS: From 81 CBCT images, 324 maxillary incisors were examined. Enamel thickness was measured at both mesial and distal regions of the tooth in three different levels: cervical, middle, and incisal (occlusal) 1/3 at a sagittal section. Measurements were made for the following tooth areas using CBCT: facial enamel thickness at 1, 3, and 5 mm from the cementoenamel junction (CEJ), palatal enamel thickness at 5 mm from the CEJ (5 mm P), facial and palatal enamel thickness at the incisal edge (IFP), mid incisal enamel thickness (IET), and the incisal edge enamel-pulp distance (IEPD). Relationships of enamel thickness with age and sex were evaluated using Independent t-test, Mann-Whitney U-test and the Pearson correlation coefficient, a simple linear regression analysis used for statistical analysis. RESULTS: Significant differences (P < 0.05) were found in terms of an inverse association between enamel thickness and chronological age at all measurements above the CEJ and the regression model for the mid-incisal enamel thickness was (R2 of 0.4). In contrast, there was an increase in IFP, palatal, and IPED enamel thickness with age. Also, significant differences were found in enamel thickness between males and females, the enamel being thicker in females in relation to facial enamel thickness, enamel palatal thickness above CEJ and IET, while for IEPD, the enamel thickness was greater in males compared to females. CONCLUSION: The measurements for enamel thickness outcome variables in relation to chronological age revealed significant differences for each measured distance and there were statistically significant differences in enamel thickness between males and females at all measurements except at IFP. These results demonstrate that CBCT can be used for noninvasive, accurate measurements of enamel thickness in both sex.

Noncarious cervical lesions: Morphology and progression, prevalence, etiology, pathophysiology, and clinical guidelines for restoration.

PURPOSE: To synthesize the literature regarding noncarious cervical lesions (NCCLs) and propose clinical guidelines when lesion restoration is indicated. MATERIAL AND METHODS: A PubMed search was performed related to NCCL morphology, progression, prevalence, etiology, pathophysiology, and restoration. RESULTS: NCCLs form as either rounded (saucerlike) depressions with smooth, featureless surfaces that progress mainly in height or as V-shaped indentations that increase in both height and depth. Prevalence ranges from less than 10% to over 90% and increases with age. Common locations are the facial surfaces of maxillary premolars. They have a multifactorial etiology due to personal habits such as excessive horizontal toothbrushing and consumption of acidic foods and drinks. Occlusal factors have been identified as contributing to the prevalence of NCCLs in some studies, whereas other studies indicate there is no relationship. The concept of abfraction has been proposed whereby mechanical stress from occlusal loading plays a role in the development and progression of NCCLs with publications supporting the concept and others indicating it lacks the required clinical documentation. Regardless of the development mechanism, demineralization occurs and they are one of the most common demineralization diseases in the body. Treatment should be managed conservatively through preventive intervention with restorative treatment delayed until it becomes necessary due to factors such as lesion progression, impact on patient's quality of life, sensitivity, poor esthetics, and food collection may necessitate restoration. Composite resins are commonly used to restore NCCLs although other materials such as glass ionomer and resin-modified glass ionomer are also used. Sclerotic dentin does not etch like normal dentin and therefore it has been recommended to texture the dentin surface with a fine rotary diamond instrument to improve restoration retention. Some clinicians use mechanical retention to increase retention. Beveling of enamel is used to increase the bonding area and retention as well as enhance the esthetic result by gradually creating a color change between the restoration and tooth. Both multistep and single-step adhesives have been used. Dentin etching should be increased to 30 seconds due to the sclerotic dentin with the adhesive agent applied using a light scrubbing motion for 20 seconds but without excessive force that induces substantial bending of a disposable applicator. Both flowable and sculptable composite resins have been successfully used with some clinicians applying and polymerizing a layer of flowable composite resin and then adding an external layer of sculptable composite resin to provide enhanced resistance to wear. When caries is present, silver diamine fluoride has been used to arrest the caries rather than restore the lesion. CONCLUSIONS: Noncarious cervical lesions (NCCLs) form as smooth saucerlike depressions or as V-shaped notches. Prevalence values as high as 90% and as low as 10% have been reported due to habits such as excessive toothbrushing and an acidic diet. Occlusal factors have been proposed as contributing to their presence but it remains controversial. Publications have both supported and challenged the concept of abfraction. They are one of the most common demineralization diseases in the body. Conservative treatment through prevention is recommended with restorative treatment delayed as long as possible. When treatment is needed, composite resins are commonly used with proposed restorative guidelines including texturing the sclerotic dentin, beveling the enamel, potential use of mechanical retention, 30 seconds of acid etching, and use of either multistep or single-step adhesives in conjunction with a light scrubbing motion for 20 seconds without excessive force placed on disposable applicators.

Association of Non-carious Cervical Lesions with Oral Hygiene Aspects and Occlusal Force.

AIM: The purpose of this case-control (CT) study was to investigate the association between the presence of non-carious cervical lesions (NCCLs) with occlusal force and other potential risk factors. MATERIALS AND METHODS: Thirty-nine participants with NCCLs [cases (CS)] and 39 with no NCCLs [control (CT)] attending the dental clinic of the Faculdades Integradas São Pedro (FAESA), located in Brazil, were enrolled in this study. Information was collected through anamnesis, clinical examination, and a questionnaire addressing aspects related to tooth brushing, dentifrice, and mouthwash use. In clinical examination, patients were submitted to four measurements of occlusal force in the maxillary first premolars and maxillary first molars, using a strain gauge sensor of medium intensity, the Flexiforce (Tekscan, South Boston, Massachusetts, United States of America). The sensor was calibrated for the unit of measurement in Newtons (N). Data were analyzed using a student's t-test and multiple logistic regression, e with a significance level of 5%. RESULTS: There was no statistically significant difference between the case and CT groups regarding the bite force in the four measured regions. Logistic regression identified sex as a factor significantly associated with NCCLs (p = 0.020). The odds ratio showed the female sex had more chance (OR = 6.082; CI = 1.332-27.765) of having NCCLs. CONCLUSION: It is concluded that females presented a higher risk factor for NCCLs than men. In contrast, there was no association of occlusal force, as well as aspects related to brushing and deleterious habits. CLINICAL SIGNIFICANCE: Females have a higher risk factor for non-carious lesions than men.

Non-carious cervical lesions (NCCLs) and associated factors: A multilevel analysis in a cohort study in southern Brazil.

AIM: To investigate the prevalence of non-carious cervical lesions (NCCLs) and their association with individual and tooth-related factors in adults from the 1982 Pelotas Birth Cohort. MATERIALS AND METHODS: Participants were interviewed and clinically examined at the age of 31. NCCL was defined as loss of dental tissue without bacterial involvement in the cervical region. Independent variables were the socioeconomic, demographic, behavioural, and clinical characteristics. Associations were tested using a multilevel Poisson regression model. RESULTS: Five-hundred and thirty-nine participants were clinically examined, with a 26% prevalence of NCCLs, which were more prevalent in the maxilla (56.5%) and in premolars (72.9%). In the multilevel analysis, women presented lower prevalence than men [prevalence ratio (PR) 0.59 (0.48-0.73)]; those who reported smoking at both 22 and 30 years of age had more NCCLs than those who never smoked [PR 1.65 (1.31-2.07)]; and high-frequency brushers presented higher prevalence than low-frequency brushers [PR 1.26 (1.03-1.55)]. Gingival recession increased 10 times the prevalence of NCCLs [PR 10.03 (8.15-12.35)], while the presence of periodontal pockets (≥4 mm) reduced the prevalence of NCCLs [PR 0.43 (0.28-0.66)]. CONCLUSIONS: NCCLs were more prevalent in males, smokers, and those with higher frequency of toothbrushing. While the presence of periodontal pockets was associated with a lower prevalence of NCCLs, gingival recession was a strong clinical indicator for the presence of NCCLs.

External cervical resorption - Treatment outcomes and determinants: A retrospective cohort study with up to 10 years of follow-up.

AIM: To assess long-term external cervical resorption (ECR) treatment outcomes in relation to both local and treatment-related determinants. METHODOLOGY: Information was available for 76 patients (98 teeth) who were diagnosed with ECR during the period from 2008 to 2018 at the University of British Columbia graduate endodontics clinic. The ECR patients were followed up, and a clinical and radiographic examination was conducted. Chi-square test compared failure rates amongst different subgroups. The survival analysis was used to evaluate the overall ECR survival/failure rates in relation to several local and treatment-related determinants. RESULTS: Overall, 67 patients (89 teeth) were followed up. The mean follow-up time was 3.9 years, and the minimum was 1 year. Twenty-four teeth failed (19 extracted, 5 not functional), and the overall probability of failure was 50.0% 8 years after the diagnosis. Significant (p < .05) local ECR determinants were tooth location and the Heithersay classification, and treatment-related determinants were root canal treatment (RCT) and the ECR repair combined with RCT. Treatment outcomes for Heithersay class 1 and 2 cases were better than for class 3 and 4 cases. CONCLUSIONS: Higher failure rates were associated with posterior tooth location and higher Heithersay class, whilst RCT and ECR repair combined with RCT were associated with lower failure rates.

A clinical approach strategy for the diagnosis, treatment and evaluation of external cervical resorption.

AIM: To propose a clinical approach strategy on the diagnosis, treatment and evaluation of external cervical tooth resorption (ECR) cases. To investigate and discuss the outcome of this approach. METHODOLOGY: A clinical approach strategy on ECR was developed based on a retrospective observation study of 542 teeth. Forty-seven teeth were excluded due to lack of clinical/radiographical information, and 182 were immediately extracted. This approach had three steps: diagnosis, treatment planning and evaluation. During diagnosis, the medical, dental history and clinical/radiographical characteristics were evaluated. Depending on the resorption extent, ECR cases were categorized into four classes according to Heithersay's classification. During treatment planning, a treatment decision flowchart was prepared based on four main decisive criteria: probing feasibility, pain, location and extent of resorption (class), and existence of bone-like tissue. Three treatment options were applied: (a) extraction, (b) monitoring or (c) conservative treatment by external, internal or combination of internal-external treatments. During evaluation, assessment of ECR progression, tooth survival and other factors like aesthetics and periodontal attachment were performed. Descriptive statistical analysis of the outcome for up to 10 years (for the overall clinical approach and for each individual treatment decision), was carried out with OriginLabs OriginPro 9 and Microsoft Excel 365. RESULTS: A three-step strategy was developed on how to deal with ECR cases. Indicative examples of each treatment decision were presented and discussed. The overall survival rate of this strategy was 84.6% (3 years), 70.3% (5 years), 42.7% (8 years) and 28.6% (10 years). Higher survival rate was observed for external treatment decision than for internal. The success of each treatment decision depended on the extent of the resorption (class). The success of a treatment decision should be based on the long-term outcome, as a different evolution can be observed with time. CONCLUSIONS: A clinical approach strategy was introduced on ECR pathosis. This strategy was not solely based on ECR class, as other important decisive criteria were considered. This step-wise approach, has a 70.3% survival rate with a mean of 5 years. This work will hopefully provide an incentive for a broader collaboration, to potentially establish a universally accepted ECR treatment strategy.