Repurposing dried blood spot device technology to examine bile acid profiles in human dried fecal spot samples.

Dried blood spot (DBS) analysis has existed for >50 years, but application of this technique to fecal analysis remains limited. To address whether dried fecal spots (DFS) could be used to measure fecal bile acids, we collected feces from five subjects for each of the following cohorts: 1) healthy individuals, 2) individuals with diarrhea, and 3) Clostridioides difficile-infected patients. Homogenized fecal extracts were loaded onto quantitative DBS (qDBS) devices, dried overnight, and shipped to the bioanalytical lab at ambient temperature. For comparison, source fecal extracts were shipped on dry ice and stored frozen. After 4 mo, frozen fecal extracts and ambient DFS samples were processed and subjected to targeted liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based metabolomics with stable isotope-labeled standards. We observed no differences in the bile acid levels measured between the traditional extraction and the qDBS-based DFS methods. This pilot data demonstrates that DFS-based analysis is feasible and warrants further development for fecal compounds and microbiome applications.NEW & NOTEWORTHY Stool analysis in remote settings can be challenging, as the samples must be stored at -80°C and transported on dry ice for downstream processing. Our work indicates that dried fecal spots (DFS) on Capitainer quantitative DBS (qDBS) devices can be stored and shipped at ambient temperature and yields the same bile acid profiles as traditional samples. This approach has broad applications for patient home testing and sample collection in rural communities or resource-limited countries.

Preserving frozen stallion sperm on dry ice using polymers that modulate ice crystalization kinetics.

Cryopreserved semen is routinely shipped in liquid nitrogen. Dry ice could serve as an alternative coolant, however, frozen storage above liquid nitrogen temperatures (LN2, -196 °C) may negatively affect shelf-life and cryosurvival. In this study, we determined critical temperatures for storage of cryopreserved stallion sperm. We evaluated: (i) effects of cooling samples to different subzero temperatures (-10 °C to -80 °C) prior to storing in LN2, (ii) stability at different storage temperatures (i.e., in LN2, dry ice, -80 °C and -20 °C freezers, 5 °C refrigerator), and (iii) sperm cryosurvival during storage on dry ice (i.e., when kept below -70 °C and during warming). Furthermore, (iv) we analyzed if addition of synthetic polymers (PVP-40, Ficoll-70) modulates ice crystallization kinetics and improves stability of cryopreserved specimens. Sperm motility and membrane intactness were taken as measures of cryosurvival, and an artificial insemination trial was performed to confirm fertilizing capacity. We found that adding PVP-40 or Ficoll-70 to formulations containing glycerol reduced ice crystal sizes and growth during annealing. Post-thaw sperm viability data indicated that samples need to be cooled below -40 °C before they can be safely plunged and stored in LN2. No negative effects of relocating specimens from dry ice to LN2 and vice versa became apparent. However, sample warming above -50 °C during transport in dry ice should be avoided to ensure preservation of viability and fertility. Moreover, addition of PVP-40 or Ficoll-70 was found to increase sperm cryosurvival, especially under non-ideal storage conditions where ice recrystallization may occur.

Equilibrium vitrification of oocytes using low concentrations of cryoprotectants.

In order to make dry ice transportation of vitrified embryos practical, a near-equilibrium vitrification was developed using a cryoprotectant solution (EDFS10/10a), by which mouse embryos at various stages were vitrified in a near-equilibrium environment. EDFS10/10a consisted of 10% (v/v) ethylene glycol, 10% (v/v) Me2SO, 0.4 M sucrose and 24% (w/v) Ficoll PM70. This method exhibited the benefits of slow freezing and vitrification, with a low risk of osmotic injury. In this study, we investigated whether mouse oocytes are vitrifiable with EDFS10/10a in a highly dehydrated/concentrated state, and whether they can remain fertilizable and developing into embryos after vitrification. When mature mouse oocytes were vitrified in liquid nitrogen and after 4-28 days of storage at -80 °C, high survival rates were observed (88-99%). Vitrified and warmed oocytes were subjected to partial zona dissection and in vitro fertilized. The rate of 2-cell stage was 80-82%. Blastocyst formation rate was 55-70% which was similar to that of embryos derived from fresh oocytes. After the 2-cell embryos were transferred to recipient mice, the implantation and offspring rates did not differ significantly from those of embryos derived from fresh oocytes, indicating that vitrified oocytes retained the developmental ability. Therefore, it is possible to vitrify mouse oocytes in a near-equilibrium state using EDFS10/10a and conveniently transported using dry ice.

Recent developments in cell shipping methods.

As opposed to remarkable advances in the cell therapy industry, research reveal inexplicable difficulties associated with preserving and post-thawing cell death. Post cryopreservation apoptosis is a common occurrence that has attracted the attention of scientists to use apoptosis inhibitors. Transporting cells without compromising their survival and function is crucial for any experimental cell-based therapy. Preservation of cells allows the safe transportation of cells between distances and improves quality control testing in clinical and research applications. The vitality of transported cells is used to evaluate the efficacy of transportation strategies. For many decades, the conventional global methods of cell transfer were not only expensive but also challenging and had adverse effects. The first determination of some projects is optimizing cell survival after cryopreservation. The new generation of cryopreservation science wishes to find appropriate and alternative methods for cell transportation to ship viable cells at an ambient temperature without dry ice or in media-filled flasks. The diversity of cell therapies demands new cell shipping methodologies and cryoprotectants. In this review, we tried to summarize novel improved cryopreservation methods and alternatives to cryopreservation with safe and viable cell shipping at ambient temperature, including dry preservation, hypothermic preservation, gel-based methods, encapsulation methods, fibrin microbeads, and osmolyte solution compositions.

Suicide by Gaseous Displacement of Atmospheric Oxygen With Carbon Dioxide From Dry Ice Sublimation.

ABSTRACT: Deaths from gaseous substances can occur from exposure to toxic gases or from accumulation of nontoxic gases that displace oxygen. We present a 38-year-old man with no known medical history, who was found deceased in a small bathroom with blankets and towels shoved under the door from the inside.At autopsy, the decedent was found to be in a moderate state of decomposition. There was mild pulmonary congestion, with no other significant findings. Standard postmortem toxicology on femoral blood was noncontributory.A search of the decedent's cell phone revealed statements and internet searches regarding carbon dioxide (CO 2 ) and asphyxia using dry ice. A journal entry also outlined a suicide plan using large amounts of dry ice, which was enacted by placing a laundry basket of dry ice into a bathtub containing water. Based on the investigation, the cause of death was determined to be asphyxia from displacement of oxygen with CO 2 .Dry ice sublimates into gaseous CO 2 , which quickly accumulates, with concentrations of 10% or more, rapidly becoming life-threatening. There are no pathognomonic autopsy findings seen in CO 2 -related asphyxia. In these circumstances, scene investigation is the most important factor in determining cause of death.

Transporting cells over several days without dry-ice.

This paper describes a simple, hazard-free and inexpensive procedure that allows researchers to send cultured cells across the globe at ambient temperatures. The method enables transit of up to 2 weeks without compromising cell recovery. Its use will assist collaborators in distant laboratories to exchange cells without using dry-ice.

Equilibrium vitrification of mouse embryos at various developmental stages using low concentrations of cryoprotectants.

We previously developed a new vitrification method (equilibrium vitrification) by which two-cell mouse embryos can be vitrified in liquid nitrogen in a highly dehydrated/concentrated state using low concentrations of cryoprotectants. In the present study, we examined whether this method is effective for mouse embryos at multiple developmental stages. Four-cell embryos, eight-cell embryos, morulae, and blastocysts were vitrified with EDFS10/10a, 10% (v/v) ethylene glycol and 10% (v/v) DMSO in FSa solution. The FSa solution was PB1 medium containing 30% (w/v) Ficoll PM-70 plus 0.5 M sucrose. The state of dehydration/concentration was assessed by examining the survival of vitrified embryos after storage at -80°C. When four-cell embryos and eight-cell embryos were vitrified with EDFS10/10a in liquid nitrogen and then stored at -80°C, the survival rate was high, even after 28 days, with relatively high developmental ability. On the other hand, the survival of morulae and blastocysts vitrified in liquid nitrogen and stored at -80°C for four days was low. Therefore, morulae and blastocysts cannot be vitrified in a highly dehydrated/concentrated state using the same method as with two-cell embryos. However, when blastocysts were shrunken artificially before vitrification, survival was high after storage at -80°C for four days with high developmental ability. In conclusion, the equilibrium vitrification method using low concentrations of cryoprotectants, which is effective for two-cell mouse embryos, is also useful for embryos at multiple stages. This method enables the convenient transportation of vitrified embryos using dry ice.

Logistics of an advanced therapy medicinal product during COVID-19 pandemic in Italy: successful delivery of mesenchymal stromal cells in dry ice.

BACKGROUND: During the coronavirus disease-2019 (COVID-19) pandemic, Italian hospitals faced the most daunting challenges of their recent history, and only essential therapeutic interventions were feasible. From March to April 2020, the Laboratory of Advanced Cellular Therapies (Vicenza, Italy) received requests to treat a patient with severe COVID-19 and a patient with acute graft-versus-host disease with umbilical cord-derived mesenchymal stromal cells (UC-MSCs). Access to clinics was restricted due to the risk of contagion. Transport of UC-MSCs in liquid nitrogen was unmanageable, leaving shipment in dry ice as the only option. METHODS: We assessed effects of the transition from liquid nitrogen to dry ice on cell viability; apoptosis; phenotype; proliferation; immunomodulation; and clonogenesis; and validated dry ice-based transport of UC-MSCs to clinics. RESULTS: Our results showed no differences in cell functionality related to the two storage conditions, and demonstrated the preservation of immunomodulatory and clonogenic potentials in dry ice. UC-MSCs were successfully delivered to points-of-care, enabling favourable clinical outcomes. CONCLUSIONS: This experience underscores the flexibility of a public cell factory in its adaptation of the logistics of an advanced therapy medicinal product during a public health crisis. Alternative supply chains should be evaluated for other cell products to guarantee delivery during catastrophes.

Cryopreservation without dry ice-induced acidification during sample transport.

Dry ice (solid CO2) remains highly useful when temperature-sensitive biological samples need to be cryogenically transported. CO2 released during the sublimation of dry ice can diffuse through gas permeable receptacle material or any defective seals resulting in potential sample acidification and compromised integrity. In addition, the quality of cryopreservation can be undermined once the dry ice is exhausted. The dry ice carrier design described here has been demonstrated to prevent sublimated CO2 from reaching the samples while maintaining storage temperature below -60 °C for 19 h. It is also equipped with microcontroller-based temperature monitoring for traceability and CO2 gas monitoring for safety.

Dry ice in the eye: A rare occupational hazard!

Superficial corneal foreign bodies (FBs) are a common occupational ocular hazard and can cause visually important astigmatism. A 23-year-old male working in a factory, which produced dry ice (solid carbon dioxide), presented to our emergency unit with symptoms of whitish discolouration of the right cornea for 1 day. Visual acuity in both eyes was 20/20 and slit-lamp examination of the right eye revealed an irregularly shaped whitish superficial FB in the inferior paracentral cornea with surrounding superior nebular opacity. Its gentle removal with a moistened cotton bud revealed an underlying epithelial defect with residual whitish changes. At 1-month of follow-up, the patient had nebulo-macular corneal opacity with stromal thinning at the site of impacted dry ice. We speculate that dry ice causes corneal damage due to its extremely cold temperatures and the formation of carbonic acid.

Rapid cooling via dry ice preserves the genetic and morphological integrity of fish embryos.

Larval fishes provide a valuable metric for assessing and monitoring species, populations, and ecosystem trends and condition. However, taxonomic resolution for this life stage is inherently problematic because of their individual sizes, limited morphological characteristics and high tissue degradation rates. There is little research on methods that rapidly preserve larval tissues for later morphological and molecular identification. The goal of this study was to test methods of rapidly killing fish embryos that maintain both morphological and molecular integrity. Rapid cooling with dry ice successfully maintained morphological and molecular integrity and may offer a simple and cost-effective approach for larval fish identification.

Actual approaches to the transportation of biological samples at low temperatures.

Taking into account the impact of shipment method of biosamples is necessary for obtaining high-quality biological samples in biobanking and laboratory research. The impact of liquid nitrogen, dry ice and cold accumulators on the quality of biological markers was considered, as well as recommendations to reduce the impact of these methods of shipment. The liquid nitrogen provides the best preservation of samples, however, dry ice is used much more often during their transportation. When transporting certain types of cells using dry ice, there is the way to use CryoStor CS1 and Cell Banker 1 cryoprotectors. The dry ice has a significant effect on both the pH of liquid biological samples and the coagulological parameters of plasma samples. The penetration of CO2 into the sample leads to changes in the parameters of PTT and APPT, as well as to decrease the protein C and fibrinogen level under certain conditions. Serum and plasma samples exposed to dry ice for more than 16 hours should be thawed open at room temperature, or instead of it should be kept at -80 °C for 24 hours to avoid changes in coagulation parameters, The use of cold accumulators is unacceptable for long-term shipment of serum and plasma containing unstable biomarkers because of insufficiently low temperature (increase over time to -25 °C and above). Besides, metal pellets can be used as cold storage batteries at low temperatures (up to -80 ° C), but they are not as effective as dry ice, since it is able to hold the required temperature for much longer.

Low-Temperature Storage Improves the Over-Time Stability of Implantable Glucose and Lactate Biosensors.

Molecular biomarkers are very important in biology, biotechnology and even in medicine, but it is quite hard to convert biology-related signals into measurable data. For this purpose, amperometric biosensors have proven to be particularly suitable because of their specificity and sensitivity. The operation and shelf stability of the biosensor are quite important features, and storage procedures therefore play an important role in preserving the performance of the biosensors. In the present study two different designs for both glucose and lactate biosensor, differing only in regards to the containment net, represented by polyurethane or glutharaldehyde, were studied under different storage conditions (+4, -20 and -80 °C) and monitored over a period of 120 days, in order to evaluate the variations of kinetic parameters, as VMAX and KM, and LRS as the analytical parameter. Surprisingly, the storage at -80 °C yielded the best results because of an unexpected and, most of all, long-lasting increase of VMAX and LRS, denoting an interesting improvement in enzyme performances and stability over time. The present study aimed to also evaluate the impact of a short-period storage in dry ice on biosensor performances, in order to simulate a hypothetical preparation-conservation-shipment condition.

Effects of rosemary (Rosmarinus officinalis L.) extracts and dry ice on the physicochemical stability of omega-3 fatty-acid-fortified surimi-like meat products.

BACKGROUND: Lipid peroxidation entails major quality degradation in omega-3 (ω-3) fatty-acid-fortified surimi-like meat products upon storage. Currently, the use of label-friendly alternatives to synthetic antioxidants is encouraged in the industry. Hence, we aimed to examine the applicability of the hurdle-technology concept, using an 80% (v/v) ethanol solution to obtain rosemary extracts (REs) containing substantial amounts of polyphenol, and dry ice (DI) which can create a cryogenic environment, on the physicochemical stabilities of ω-3 fatty-acid (FA)-fortified meat products after manufacturing and storage periods. The polyphenolic profiles of the REs were also investigated. RESULTS: Carnosol and rosmarinic acid are major phenolic components in REs. Furthermore, DI addition during the chopping procedure increased (P < 0.05) whiteness values and hardness of products, while total ω-3 and ω-6 FAs were relatively well preserved (P < 0.05) in products with flaxseed oil premixed with RE. During 14-day storage at 4 °C, combined treatment with RE and DI decreased (P < 0.05) thiobarbituric acid reactive substance (TBARS) levels and the centrifugation loss of products. Single or combined treatment with RE and/or DI decreased (P < 0.05) TBARS levels in products after 60 days of storage at -20 °C. CONCLUSION: Due to the antioxidant-polyphenol profile of REs and a possible oxygen exclusion of DI treatment under atmospheric pressure during food manufacturing, application of the hurdle-technology concept, using treatment with both RE and DI, can reduce lipid peroxidation and maintain a greater water-holding capacity of ω-3 FA-fortified meat products upon storage. © 2019 Society of Chemical Industry.

Freezing sperm in short straws reduces storage space and allows transport in dry ice.

Efficient cryopreservation and transportation of mouse sperm are among the most desirable strategies for current and future research on mouse genetics. However, the current method for sperm cryopreservation uses an 11-cm plastic straw, which is a bulky and fragile container. Developing an alternative to overcome the limitations associated with this method would accelerate biomedical research. Here, we developed the ST (sperm-freezing in ShorT STraw to reduce STorage space) method for cryopreserving mouse sperm in short 3.8-cm plastic straws. Up to nine short straws can be stored in a cryotube, reducing storage space. We further show that sperm frozen by the ST method can be transported in liquid nitrogen or dry ice without any detrimental effects on subsequent fertilization and the birth rate. Our findings suggest that this sperm-freezing method is beneficial not only for individual laboratories but also for large-scale mutagenesis/knockout and phenotyping programs.

Ultra Cryo-Milling with Liquid Nitrogen and Dry Ice Beads: Characterization of Dry Ice as Milling Beads for Application to Various Drug Compounds.

Ultra cryo-milling using liquid nitrogen (LN2) and dry ice beads has been proposed as a contamination-free milling technique. The morphological change of dry ice beads was visually monitored in LN2 to clarify their production process and cryo-milling process. We found that dry ice pellets, which are starting material of beads and available on the market, immediately disintegrate in LN2, resulting in the spontaneous production of dry ice beads. In addition, the resultant beads maintain their size and shape even under vigorous agitation in LN2, demonstrating that they could play a role of milling media in the milling process. The driving conditions of this cryogenic milling process including beads size were optimized to enhance the milling efficiency. Dry ice beads provided superior milling efficiency compared to original pellets. The milling efficiency increased as the size of the dry ice beads decreased; furthermore, the larger the amount of beads used, the finer the milled particles. Any crystals of three drug compounds were effectively pulverized to the sub- or single-micron range. Cryo-milling with dry ice beads is valuable on pharmaceutical field because it does not contaminate the product with fractured and/or eroded beads.

Effects of a dry-ice process on surface and carcase decontamination in the poultry industry.

1. The objective of this study was to evaluate the effects of dry-ice decontamination on equipment and carcase surfaces in a poultry slaughterhouse and to present an effective alternative method to the conventional decontamination processes. 2. Appreciable reductions occurred in total aerobic mesophilic bacterial counts of surface swab samples treated with dry ice (maximum difference 3.92 log cfu/100 cm2). 3. After dry-ice treatment, Listeria spp. were detected on surfaces of pluckers and chiller cylinders, whereas Salmonella spp. were totally inhibited. 4. A dry-ice spraying application was more effective than a dry-ice immersing application on total aerobic mesophilic bacteria and yeast and mould counts on poultry carcases. 5. Dry-ice treatment has advantages over conventional processes. Unlike other decontamination techniques, there are no residues, so no need to wash off chemical residues from surfaces as it removes contaminants effortlessly and is environmentally friendly. 6. Dry-ice blasting of production equipment can reduce the microbial load and has potential for use in the poultry industry.

The effects of dry ice exposure on plasma pH and coagulation analyses.

BACKGROUND: We recently observed that exposure to dry ice lowered sample pH and increased clotting times in lupus anticoagulant analyses, and that such changes could be prevented by placing samples at -80°C after dry ice exposure. In the current study, we sought to evaluate the effects of dry ice exposure on pH and various commonly used coagulation analyses. METHODS: Citrated plasma from 30 healthy blood donors was allocated to four preanalytical regimes: (1) immediate analysis of fresh plasma or (2) storage at -20°C; (3) storage at -20°C followed by dry ice exposure for 24 h or (4) storage at -20°C followed by dry ice exposure for 24 h and storage at -80°C for 24 h before analysis. Analyses of pH, prothrombin time international normalized ratio (PT-INR), activated partial thromboplastin time (APTT), antithrombin, fibrinogen, protein C and protein S was performed. RESULTS: Samples exposed to dry ice had significantly lower pH, prolonged clotting times in PT-INR, APTT and fibrinogen analyses as well as lower levels of protein C, than samples not exposed to dry ice. These changes in coagulation analyses were not present if samples were stored at -80°C for 24 h after dry ice exposure. Antithrombin and protein S were not significantly affected by dry ice exposure. CONCLUSIONS: Dry ice exposure lowered sample pH and affected various coagulation analyses. These effects were avoided by storing samples at -80°C for 24 h after dry ice exposure.

Experimental determination of surface heat transfer coefficient in a dry ice-ethanol cooling bath using a numerical approach.

BACKGROUND: Dry ice-ethanol bath (-78 degree C) have been widely used in low temperature biological research to attain rapid cooling of samples below freezing temperature. The prediction of cooling rates of biological samples immersed in dry ice-ethanol bath is of practical interest in cryopreservation. The cooling rate can be obtained using mathematical models representing the heat conduction equation in transient state. Additionally, at the solid cryogenic-fluid interface, the knowledge of the surface heat transfer coefficient (h) is necessary for the convective boundary condition in order to correctly establish the mathematical problem. OBJECTIVE: The study was to apply numerical modeling to obtain the surface heat transfer coefficient of a dry ice-ethanol bath. MATERIALS AND METHODS: A numerical finite element solution of heat conduction equation was used to obtain surface heat transfer coefficients from measured temperatures at the center of polytetrafluoroethylene and polymethylmetacrylate cylinders immersed in a dry ice-ethanol cooling bath. The numerical model considered the temperature dependence of thermophysical properties of plastic materials used. RESULTS: A negative linear relationship is observed between cylinder diameter and heat transfer coefficient in the liquid bath, the calculated h values were 308, 135 and 62.5 W/(m2K) for PMMA 1.3, PTFE 2.59 and 3.14 cm in diameter, respectively. CONCLUSION: The calculated heat transfer coefficients were consistent among several replicates; h in dry ice-ethanol showed an inverse relationship with cylinder diameter.