Periodontal pockets: Predictors for site-related worsening after non-surgical therapy-A long-term retrospective cohort study.

AIM: To evaluate site-related changes in periodontal pocket depth (PPD) after non-surgical periodontal therapy and to identify predictors for PPD changes in a retrospective patient data analysis. MATERIALS AND METHODS: PPD, clinical attachment level, bleeding on probing, tooth mobility (TM), furcation involvement (FI), abutment status, adherence to supportive periodontal care (SPC) and SPC follow-ups were obtained from fully documented patient data before periodontal therapy (baseline, T0), after active periodontal therapy (APT, T1) and during SPC (T2). PPD changes were classified into deteriorated or unchanged/improved at the site level. Multi-level logistic regression analysis was performed to identify factors influencing PPD changes during SPC. RESULTS: This retrospective study included 51 females and 65 males (mean T0 age: 54.8 ± 10.1 years, 25 smokers, 12 diabetics) suffering from Stage III/IV periodontitis. Evaluation outcome: T0/16,044 sampling sites/2674 teeth; T1/15,636/2606; T2/14,754/2459. During 9.0 ± 2.3 years SPC, PPD decreased (-1.33 ± 0.70 mm) by 21.8% of the sites, remained unchanged by 41.4% and increased (1.40 ± 0.78 mm) by 36.8%. Distopalatal FI (p < .001, odds ratio [OR]: 0.252, 95% confidence interval [CI] for OR: 0.118-0.540), residual pockets (p < .001, OR: 0.503, 95% CI: 0.429-0.590) and TM Degrees I-III (Degree I: p = .002, OR: 0.765, 95% CI: 0.646-0.905; Degree II: p = .006, OR: 0.658, 95% CI: 0.489-0.886; Degree III: p = .023, OR: 0.398, 95% CI: 0.180-0.879) correlated significantly with increasing PPD. CONCLUSIONS: Over 75% of PPD remained unchanged or increased during SPC. Distopalatal FI, TM Degrees I-III and residual pockets after APT lead to worsening of periodontal pockets.

A nomogram-based predictive model for tooth survival in Chinese patients with periodontitis: An 11-year retrospective cohort study.

AIM: To develop a nomogram-based predictive model of tooth survival by comprehensively analysing clinical and radiographic risk factors of tooth loss (TL). MATERIALS AND METHODS: In this study, 3447 teeth of 131 subjects who underwent non-surgical periodontal treatment were examined retrospectively within a mean follow-up period of 11.6 years. The association of risk factors including clinical and radiographic parameters with TL was assessed using univariate and multivariate Cox regression analyses. A nomogram-based predictive model was developed, and its validation and discriminatory ability were analysed. RESULTS: In all, 313 teeth were lost in 94 patients in this study (overall tooth loss [OTL] 9.08%; 0.21 teeth/patient/year). Male, heavy smoking, molar teeth, probing depth (PD), attachment loss (AL), tooth mobility and radiographic bone loss were significantly associated with TL (p < .05). A gradient effect of tooth mobility on TL increased from degree I to III versus none (p < .0001). The area under the curve (AUC) of the model was 0.865. Calibration curve and decision curve analysis demonstrated good performance and high net benefit, respectively. CONCLUSIONS: Adopting a specific nomogram could facilitate the prediction of tooth survival and the development of tailored treatment plans in Chinese patients with advanced periodontitis.

Changes in periodontal parameters of splinted versus non-splinted posterior teeth during ten years of supportive periodontal therapy - A retrospective evaluation.

OBJECTIVES: To compare periodontal parameters of splinted posterior teeth versus control teeth over ten years of supportive periodontal therapy (SPT) and to assess the survival rate of splints. MATERIAL AND METHODS: Retrospective data of 372 SPT-patients was screened for splints (composite/fiberglass-reinforced composite) in the posterior (molars/premolars) which were inserted at least ten years before due to increased tooth mobility. For each splinted tooth (test), a corresponding control tooth had to be present at the first SPT-session after splint insertion (T1). Data was assessed at T1 and ten years later (T2). Possible influencing covariates for splint survival (mobility degree/Eichner class) were tested by Cox regression. The change in clinical attachment level (ΔCAL), probing pocket depth (ΔPPD) and the testing of possible influencing covariates was analyzed by using mixed linear regression. RESULTS: Twenty-four patients (32 splints, 58 splinted teeth) were included. Ten test and two control teeth were lost. No differences were observed between ΔCAL and ΔPPD of test teeth compared to control teeth (ΔCAL -0.38 ± 1.90 vs. 0.20 ± 1.27 mm; ΔPPD -0.17 ± 1.18 vs. 0.10 ± 1.05 mm). Twenty-two splints fractured during the observation period (survival-rate: 31%). Mobility degree and Eichner class did not influence time until fracture. CONCLUSIONS: Splinting of periodontally compromised and mobile posterior teeth does not have any disadvantage regarding the clinical periodontal situation when regular SPT is applied. However, splint fractures occur very often. CLINICAL RELEVANCE: Splinting of posterior teeth is a treatment option in addition to active periodontal therapy when patients are disturbed by tooth mobility but splints have a high susceptibility to fracture.

Comparison of two composite resin materials for splinting of dental luxation injuries: A double blind randomized controlled trial.

BACKGROUND/AIM: Luxation is a common traumatic dental injury treated with a wire composite (WC) splint. However, bulk-fill flowable composite and conventional packable composite have not been compared for retaining these splints. Therefore, the objectives of this randomized controlled trial were (1) to compare retention of WC splints, and (2) to compare adhesive point dimension, application and removal time, and effect on tooth mobility between the two WC splints. MATERIALS AND METHODS: In this parallel group, non-inferiority double blind randomized controlled trial, a total of 90 patients, aged 16-50 years participated. They were randomly allocated into two groups, the packable composite group (PC) n = 45 and the bulk-fill flowable composite group (BF-FC) n = 45 by lottery method. Following measurements were taken at the splint application appointment. Horizontal tooth mobility measured via Periotest, splint application time, and frontal images of splinted teeth to measure the percentage composite adhesive point area. After 2 weeks, splints were visually inspected for retention, whereas mobility and removal times were also recorded. Statistically, comparisons were made using independent samples sample T-test, Fisher's exact test, and Mann-Whitney U at p ≤ .05. RESULTS: A total of 88 patients with 156 luxated teeth completed the trial, as two patients were lost to follow-up. Two patients in the PC group reported with completely de-bonded splints while none de-bonded in the BF-FC group. Both groups were similar in terms of splint retention (p = .352), reduction of mobility (p = .426), and splint removal times (p = .372). The BF-FC group performed significantly better in adhesive point dimension percentages (p < .001) and splint application time (p < .001). CONCLUSION: Both groups were comparable in most parameters of the study. However, for BF-FC group application time and adhesive point dimension were significantly less.

Effect of wire diameter and extent of wire composite splint on the mobility of luxated and anchor primary teeth: A typodont study.

BACKGROUND/AIMS: The recommendations for splinting are well established for the injuries of permanent dentition; however, ambiguity still exists for the injuries in primary dentition. Hence, this study aimed to determine the most appropriate dimensions of stainless steel wire and its extent, for achieving the physiologic mobility in primary dentition. MATERIAL AND METHODS: This study was designed as an in vitro experiment by using a typodont model of primary dentition. The baseline mobility of primary maxillary incisors was calibrated to the physiologic mobility of natural primary incisors by using a Teflon tape wrapped around the roots of resin teeth. Splinting was done using a stainless steel wire of 0.2 mm (Group I), 0.3 mm (Group II), and 0.4 mm (Group III). These groups were subdivided (a, b, and c) on the basis of the extent of the splint, and pre splint mobility (Pre-PV) and post-splint mobility (Post-PV) were tested by Periotest M. The splint effect was calculated by subtracting Post-PVs and Pre-PVs. RESULTS: The normal values of mobility in healthy human volunteers ranged from 10.5 to 13. The overall splint effect was higher in Group III irrespective of the extent of the splint, whereas it was found to be the lowest in Group I (b and c). The splint effect increased with the extent of the splint in all the groups. Among all the groups, the splint effect on the anchor teeth was observed to increase with the extent of the splint and the diameter of the wire. CONCLUSION: The mobility of the injured and anchor teeth splinted with 0.2-mm stainless steel wire was similar to the pre-splint and physiologic mobility. The most favorable extension was one tooth adjacent to the injured tooth on each side for both 0.2- and 0.3-mm wires.

Tooth mobility restriction by multistranded and CAD/CAM retainers-an in vitro study.

OBJECTIVES: Orthodontic retainers should restrict physiological tooth mobility as little as possible. While this has been investigated for multistranded retainers, there is a lack of data for novel CAD/CAM retainers. To address this, the present study compared the restriction of physiological tooth mobility in multistranded retainers and different CAD/CAM retainers. MATERIAL/METHODS: One group of multistranded (n = 8) and five groups of CAD/CAM retainers (nickel-titanium (NiTi), titanium grade 5 (Ti5), polyetheretherketone (PEEK), zirconia (ZrO2), and cobalt-chromium (CoCr); each n = 8) bonded from canine to canine were investigated for their influence on vertical and horizontal tooth mobility using an in vitro model of a lower arch in a universal testing machine. Load-deflection curves were determined and statistically analysed. RESULTS: All retainers restricted tooth mobility to varying extents. The retainers had less of an influence on vertical tooth mobility, with less of a difference between retainers (14%-38% restriction). In contrast, significant (P ≤ 0.05) differences were observed between retainers in the restriction of horizontal tooth mobility. ZrO2 retainers had the greatest impact, restricting horizontal tooth mobility by 82% (68 ± 20 µm/100N), followed by CoCr (75%, 94 ± 26 µm/100N) and PEEK (73%, 103 ± 28 µm/100N) CAD/CAM retainers, which had comparable effects on horizontal tooth mobility. Ti5 (54%, 175 ± 66 µm/100N) and NiTi (34%, 248 ± 119 µm/100N) CAD/CAM retainers had less of an influence on horizontal tooth mobility, and were comparable to multistranded retainers (44%, 211 ± 77 µm/100N). LIMITATIONS: This is an in vitro study, so clinical studies are needed to draw clinical conclusions. CONCLUSIONS: Multistranded and CAD/CAM retainers have different effects on tooth mobility in vitro. These effects should be further explored in future in vivo studies.

Comparative evaluation of treatment of angular bone defect related to over-erupted tooth using guided tissue regeneration (GTR) followed by orthodontic intrusion (OI) versus OI followed by GTR: a controlled clinical trial.

BACKGROUND: Prematurity resulted from pathological migration of periodontally involved teeth with the loss of vertical stopping points between teeth, which can lead to teeth over eruption with dimensional changes favoring occlusal discrepancies. Therefore, evaluating and comparing the effect of guided tissue regeneration followed by orthodontic intrusion as opposed to orthodontic intrusion tracked by guided tissue regeneration in the treatment of an over-erupted tooth with angular bone loss. METHODS: Twenty teeth in ten cases were selected with at least two teeth with vertical over-eruption and angular bone loss with the presence of their opposing. In group one, ten teeth over-erupted were treated by guided tissue regeneration followed by orthodontic intrusion, whereas, in group two, ten teeth over-erupted were treated by orthodontic intrusion followed by guided tissue regeneration. They were evaluated clinically for pocket depth, bleeding on probing, and tooth mobility. Radiographical evaluation assessed by cone beam computed tomography. RESULTS: Clinically, there existed a statistically significant difference (P value ≤ 0.05) in favor of group one at six months post and in favor of group two at one year from re-evaluation regarding pocket depth and tooth mobility. Radiographically, in group one, there was a statistically significant improvement (P value ≤ 0.05) at six months post-guided tissue regeneration or orthodontic intrusion regarding defect depth and dimensional changes of the defect area, with a statistically significant difference (P value ≤ 0.05) in favor of group two at one year from re-evaluation phase regarding defect depth and defect area dimensional changes. CONCLUSION: There was a short-term improvement in group one, which deteriorated over a long period compared with group two, so it is preferable to start orthodontic intrusion before guided tissue regeneration.

Multifactorial analysis of factors influencing premolar mobility in stage III/IV grade C periodontitis patients ≤ 35 years of age: a cross-sectional study.

BACKGROUND: Previous studies have suggested a potential link between the crown-to-root ratio (CRR) and root morphology in patients with mild chronic periodontitis, which may be associated with tooth mobility. However, these findings have not been thoroughly investigated. Our previous study found that 76% of patients with aggressive periodontitis, particularly those with premolar involvement, exhibited abnormal root morphology, severe alveolar bone loss, and increased tooth mobility, leading to poor clinical outcomes. This study aims to investigate the specific correlations among alveolar bone resorption, root morphology, CRR, and periodontal clinical indicators with premolar mobility in stage III/IV grade C periodontitis patients aged ≤ 35 years. MATERIALS AND METHODS: A total of 1,064 premolars from 151 stage III/IV grade C periodontitis patients aged ≤ 35 years were included in the study. Clinical periodontal parameters and radiographic measurements were recorded. Logistic regression analysis was used to explore the relationships between these indicators and tooth mobility. RESULTS: Significant variations in premolar root lengths were observed, ranging from 6.80 mm to 20.96 mm. Teeth with shorter roots (mean length: 10.22 mm) exhibited grade I mobility with only 28% alveolar bone resorption, whereas those with medium-length (mean length: 12.67 mm) and longer roots (mean length: 14.91 mm) exhibited mobility at 34% and 37% bone resorption, respectively. Regression models incorporating the bone-level CRR, average probing depth, and root length demonstrated strong predictive accuracy for tooth mobility (P < 0.001, AIC = 1700.574). CONCLUSION: Premolar mobility is influenced by variations in root length, alveolar bone resorption, and probing depth. The bone-level CRR is an effective predictor for assessing tooth mobility, especially when there are differences in root length and alveolar bone resorption.

Reliability of early stage symptoms/clinical findings of osteonecrosis of the jaw: Japanese Osteoporosis Intervention Trial-05 (JOINT-05).

INTRODUCTION: To investigate the differences in the incidence rates of suspected stage 0/1 osteonecrosis of the jaw (ONJ) and incidence risk of relevant clinical findings of suspected stage 0 ONJ between patients treated with sequential therapy comprising weekly teriparatide for 72 weeks followed by alendronate for 48 weeks vs. those who received monotherapy with alendronate for 120 weeks. MATERIALS AND METHODS: Suspected stage 0/1 ONJ was defined by non-specific symptoms. Tooth mobility and periodontal symptoms (gingival bleeding, swelling, and/or pain) were selected as clinical findings of suspected stage 0 ONJ. Poisson regression models were applied to calculate the incidence rate ratios of suspected stage 0/1 between the teriparatide group (TG) and alendronate group (AG). Generalized linear models were used to calculate the risk ratios of clinical findings between groups. RESULTS: Two hundred and sixty-one participants in the TG and 344 in the AG answered a structured questionnaire on oral health and were included in this study. There were no significant differences between the groups in the incidence rate of suspected stage 0/1 ONJ at both 72 and 120 weeks. The risk ratio of the TG to AG for tooth mobility was 0.34 (95% confidence interval [CI] 0.13-0.88, p = 0.02) at 72 weeks and 0.90 (95% CI 0.40-2.03, p = 0.83) at 120 weeks. The incidence rate of tooth mobility related to periodontal symptoms decreased in the TG and increased in the AG during the study. CONCLUSION: Tooth mobility accompanied by clinical periodontal symptoms may be a useful early sign of stage 0 ONJ.

A new CAD/CAM tooth mobility simulating model for dental in vitro investigations.

OBJECTIVES: To validate a new tooth mobility simulating in vitro model for biomechanical tests of dental appliances and restorations. MATERIAL AND METHODS: Load-deflection curves for teeth in CAD/CAM models (n = 10/group, 6 teeth/model) of the anterior segment of a lower jaw with either low tooth mobility (LM) or high tooth mobility (HM) were recorded with a universal testing device and a Periotest device. All teeth were tested before and after different ageing protocols. Finally, vertical load capacity (Fmax) was tested in all teeth. RESULTS: At F = 100 N load, vertical/horizontal tooth deflections before ageing were 80 ± 10 µm/400 ± 40 µm for LM models and 130 ± 20 µm/610 ± 100 µm for HM models. Periotest values were 1.6 ± 1.4 for LM models and 5.5 ± 1.5 for HM models. These values were within the range of physiological tooth mobility. No visible damage occurred during ageing and simulated ageing had no significant effect on tooth mobility. Fmax values were 494 ± 67 N (LM) and 388 ± 95 N (HM). CONCLUSION: The model is practical, easy to manufacture and can reliably simulate tooth mobility. The model was also validated for long-term testing, so is suitable for investigating various dental appliances and restorations such as retainers, brackets, dental bridges or trauma splints. CLINICAL RELEVANCE: Using this in-vitro model for high standardised investigations of various dental appliances and restorations can protect patients from unnecessary burdens in trials and practice.

Biomechanical properties of periodontal tissues in non-periodontitis and periodontitis patients assessed with an intraoral computerized electronic measurement device.

OBJECTIVE: To identify tooth mobility (TM) by time-dependent tooth displacement using an electronic intra-oral loading device (ILD) in periodontally healthy and periodontally compromised patients. MATERIALS AND METHODS: Twenty-eight untreated periodontitis and 20 periodontally healthy patients [25 female and 26 male; ages: 20-81 years], contributing with 68 teeth (periodontitis: nteeth = 28; non-periodontitis: nteeth = 40), participated in the study. TM was measured in vivo by displacing central or lateral incisors to a maximum of 0.2 mm orally over durations of 0.5 s, 1 s, and 10 s with the ILD. The maximum force (Fmax) was extracted from the measured force/deflection curves for every single measurement. RESULTS: Differences in TM-ILD values were found for periodontitis as compared to non-periodontitis patients derived from the same loading durations (differences of 3.9 (0.5 s), 3.1 (1 s), 2.8 (10 s), (95% CI for 0.5 s (1.2-6.7), p = 0.024; 1 s (1.4-6.0), p = 0.067; 10 s (0.2-5.3), p = 0.001), rejecting the null hypothesis of no difference (T-test) for durations of 0.5 and 10 s. There was a significant correlation of TM-ILD (Fmax) with BOP at 0.5 s (- 0.52) and with attachment loss at all time durations (- 0.47 at 0.5 s; - 0.57 at 1 s; - 0.47 at 10 s). CONCLUSIONS: This clinical investigation could demonstrate that time-dependent tooth displacements using a new computerized electronic device were associated with attachment loss and bleeding on probing. CLINICAL RELEVANCE: ILD can improve the monitoring of tooth mobility, as TM-ILD values reflect qualitative (inflammatory status interpreted by BOP) and quantitative parameters (interpreted as the amount of CAL loss) of periodontal disease.

Digital workflow for periodontal splinting with a guided device.

OBJECTIVE: To detail a technique for bonding periodontal splint precisely in a digital workflow. CLINICAL CONSIDERATIONS: Periodontal splinting can be considered to stabilize the mobile teeth, especially for mandibular anterior teeth. Reliable bonding of periodontal splints is a prerequisite for successful clinical performance. However, when bonding the indirect splint to place or making direct splint intraorally, there is a significant risk of mobile teeth drifting away from the splint. To guide accurate insertion of periodontal splint with no risk of displacement of mobile teeth, a guide device fabricated by digital workflow is introduced in this article. CONCLUSIONS: Periodontal compromised teeth can be provisionally fixed during splinting, with the help of the guided device, and precise bonding of the splint is readily accomplished by using such digital workflow. This technique is not only applicable to the lingual splints, but also suitable for the labial ones. CLINICAL SIGNIFICANCE: The use of a guided device, after being digitally designed and fabricated, enables to stabilize the mobile teeth, in case of any displacement during splinting. It is straightforward, and beneficial to reduce the risk of complications, such as debonding of the splint, and secondary occlusal trauma.

Patterns and predictors of periodontal disease and tooth loss among users of smokeless tobacco.

BACKGROUND: Smokeless tobacco (SLT) products of several different types are widely used in several South Asian countries including Pakistan. These products are consumed in different forms and with different names. The study aims to determine adverse effects of the SLT consumption on periodontal tissues. METHODS: This cross sectional study was conducted in Karachi, Pakistan. It recruited 377 users of (SLT) with 231 males (61.3%) and 146 females (38.7%) of age 15 to 45 years. After obtaining informed consent, quantitative data were collected via a questionnaire followed by intra oral clinical examination to determine presence of periodontal diseases using community periodontal index (CPI). To determine the association between periodontal diseases and smokeless tobacco consumption habits, Chi Square test was conducted. RESULTS: Gingival recession (Class II-IV) (65.8%) was the most prevalent periodontal disease among SLT users. CPI score was high (CPI score 3 and 4) in 31.3% participants, whereas tooth loss was found in 21%. Among types of SLT products, gutka (28.6%) and betel quid (23.3%) were most commonly used. Using SLT for five or more years was found to be associated with a high CPI score, gingival recession (Class II-IV), moderate to severe tooth mobility, and presence of tooth loss. CONCLUSIONS: The study found statistically significant association between duration in years of using SLT and periodontal disease including gingival recession, tooth mobility and tooth loss. However, no significant results were found between retention during single use and frequency of SLT use per day. However, the link of these factors with the periodontal disease cannot be eliminated.

The Impact of Progesterone and Estrogen on the Tooth Mobility.

Background and Objectives: Progesterone and estrogen modify the bone metabolism directly related to the periodontium, this study aimed at answering the question whether fluctuations in the levels of these hormones or the use of their synthetic equivalents in modern contraceptives have a significant impact on the natural tooth mobility (TM) in its alveolus. Materials and Methods: Sixty healthy women who had never been pregnant and when interviewed reported either (1) having regular menstruations every 28-30 days or (2) taking oral two-phase two-ingredient hormonal contraceptives formed, respectively, groups M and S in the study. TM evaluated as the Periotest value (PTV) was checked in the menstruation, ovulation, and luteal phases of the menstrual cycle (group M) and on the days corresponding to the moment of the menstrual cycle in group S. Results: Although the PTV-s were within the limits of norm, the canines and the molars were always more stable than the other teeth. In group M, the TM was statistically comparable (p > 0.05) in the menstrual and ovulation phases, thus significantly increased (p < 0.001) in the luteal phase. The TM remained constant (p = 0.758) in all studies in group S. The results demonstrated that the canines and the molars in the luteal phase were significantly more mobile in group M than in group S (p < 0.001), although increased mobility of the teeth in group M affected the canines and the first molars to a significantly lesser degree than the other teeth. Conclusions: However, since women between 20 and 30 years old constitute the majority of ortho-dontic patients, possible determination of the optimum moment of force application in relation to the sex hormones cycle, namely, to its luteal phase, is clinically very promising.

Assessing the Sealing Performance and Clinical Outcomes of Endodontic Treatment in Patients with Chronic Apical Periodontitis Using Epoxy Resin and Calcium Salicylate Seals.

Background and Objectives: Recognizing the significance of a hermetic apical seal for successful root canal treatment, the present investigation aimed to evaluate two sealing materials through an in vitro analysis, as well as to ascertain the clinical outcomes of patients treated with these two sealers in an in vivo setting. Materials and Methods: For the in vitro part of the study, two control groups of thirty monoradicular teeth were obturated with two sealers. Then, the sealers' performance was tested based on a predefined protocol. Group A included 30 patients treated with an epoxy oligomer resin-based sealer (Adseal, MetaBiomed), while Group S comprised 30 patients treated with a polymeric calcium salicylate-based sealer (Sealapex, Kerr). Samples were sectioned and evaluated under the microscope to determine the sealer's tightness by measuring the dye penetration into the root canal filling. For the in vivo part, a prospective study was designed to include 60 patients with chronic apical periodontitis in two endodontic treatment groups, using the same two sealers. Results: The in vitro analysis found that dye penetration in Group A was 0.82 mm (±0.428), while in Group S, the dye penetration was statistically significantly deeper, being 1.23 mm (±0.353). In the in vivo part of the study, the periapical index (PAI) significantly decreased 6 months after endodontic treatment, with 80.0% of patients in Group A having a PAI score of 2 compared to only 56.7% in Group S (p-value = 0.018). Similarly, tooth mobility scores significantly decreased after treatment, but with no difference between groups. The marginal bone loss decreased significantly more in the Adseal group compared to the Sealapex group (23.3% vs. 50.0%, p-value = 0.032). At the same time, 40.0% of patients in Group S had failed tooth healing compared to only 13.3% in Group A (p-value = 0.048). Conclusions: The in vitro study showed that Adseal had a better sealing capacity and a lower degree of dye penetration compared to Sealapex. However, on clinical evaluation in the in vivo study, both patient groups exhibited significant improvements in periapical index, tooth mobility scores, and pain reduction following endodontic treatment. Nevertheless, patients treated with Adseal showed a significantly greater improvement in PAI values, tooth mobility, and teeth healing after treatment. Overall, Adseal, as an endodontic sealer, may provide better sealing capabilities and enhanced clinical outcomes in the treatment of chronic apical periodontitis.

Changes in Tooth Mobility and Position in an Established Dentition Following Placement of a New Restoration.

The aim of this study is to examine and evaluate physiologic tooth mobility and movement in different groups of patients. Four groups of patients were examined and recordings were taken. Group A1 consisted of 12 undergraduate students under the age of 30, A2 consisted of 11 members of staff over the age of 30 and A3 consisted of 9 patients with periodontal disease between the ages of 40-65 years old. The fourth Group B, 14 patients between 30-70 years old, received single-tooth restorations and recordings were taken immediately after, a month and four months following the cementation of the restoration. Patients in the first 3 groups showed no significant change in tooth mobility and movement between appointments. The fourth group demonstrated a non-statistically significant increase in tooth mobility following the cementation of the restoration due to the force applied on the occlusal surface of the tooth during the cementation process, while tooth movement was not observed beyond that of physiological tooth migration. Regardless of the age or the restorations a patient receives over the years, with careful occlusal consideration, no significant changes in tooth mobility and movement should be observed.

EVALUATION OF THE CLINICAL CONDITION OF THE ORAL CAVITY BEFORE ADHESIVE SPLINTING OF MOVABLE TEETH.

The purpose of the study is to analyze the condition of the oral cavity tissues to choose the method of adhesive splinting of the anterior teeth. Increasing the efficiency of patient curation strategies and tactics based on forecasting the functional capabilities of the dental and periodontal complex. In the period from 2017 and 2021, 81 male and female patients aged 35 to 45 years were examined and treated for preventive examination and rehabilitation at the University Clinic Educational and Medical Center of Bukovinian State Medical University and diagnosed with periodontitis of varying severity. The following criteria were taken into account when forming patient groups: type of bite, absence of foci of chronic infection in the body, absence of multiple lesions of hard dental tissues, depth of periodontal pocket. During the examination, attention was paid to the shape of the dental arch, the inclination of the crowns of the teeth in the anterior region, the location of individual teeth, occlusion, the state of the oral vestibule (places of attachment of the transitional fold, depth, presence of gingival recession). Among the pathological conditions that interfere with splinting, the following were identified: traumatic occlusion (95.7%), anomalies in the location of individual teeth, fan-shaped tooth separation, crowded teeth (73.5%), pathology of the oral vestibule (46.7%), and the third degree of tooth mobility. These pathological conditions required preliminary orthodontic preparation or surgical treatment. The predominant complaints in periodontal tissue diseases were gum bleeding when brushing teeth (82.7%), tooth mobility of varying degrees (80.2%), bad breath (40.7%), and tooth bleeding when eating (30.8%). Oral hygiene was not maintained by 45.6% of the surveyed. The pathology of the attachment of the transitional fold of the oral cavity was detected in 46.7% of patients, that is, almost half of the examined. Abnormalities of the position of individual teeth were found in 73.5% of the examined. Traumatic occlusion was detected in 95.7% of the subjects.

Efficacy of tooth splinting and occlusal adjustment in patients with periodontitis exhibiting masticatory dysfunction: A systematic review.

OBJECTIVE: To evaluate the efficacy of tooth splinting (TS) and occlusal adjustment (OA) compared to no TS or OA in patients with periodontitis exhibiting masticatory dysfunction. MATERIAL: The primary outcome criterion was tooth loss (TL), and the secondary outcome parameters were change in probing pocket depth (PPD), change in clinical attachment level (CAL), tooth mobility (TM), and patient-reported outcome measures (PROMs). Literature search was performed on three electronic databases (from 01/1965 to 04/2021) and focused on clinical studies with at least 12 months follow-up. RESULTS: From a total of 1515 publications, 51 articles were identified for full-text reading, of which 2 retrospective case series on TS with low risk of bias and 1 randomized and 2 prospective studies on OA with unclear risk of bias were included. For TS, synthesis of data showed that in 72 patients, 26 out of 311 teeth (weighted mean incidence of TL 8.4%) and 156 out of 1541 teeth with no TS (weighted mean incidence of TL 10.1%) were lost over 2 years following non-surgical periodontal therapy. The randomized controlled clinical trial (RCT) indicated CAL gain for teeth with OA compared to no OA. For the effect of OA on TL, PPD, and TM, heterogeneous data were retrieved from the included studies. CONCLUSIONS: Within the limitations of this review and based on a low level of evidence, it is concluded that TS does not improve survival of mobile teeth in patients with advanced periodontitis. OA on teeth with mobility and/or premature contacts may lead to improved CAL, while the effect of OA on the remaining periodontal parameters remains unclear.

Food intake, masticatory function, tooth mobility, loss of posterior support, and diminished quality of life are associated with more advanced periodontitis stage diagnosis.

AIM: To describe periodontal and functional characteristics of subjects diagnosed with different stages of periodontitis and to associate measures of masticatory function and quality of life with periodontitis stage. MATERIALS AND METHODS: This was a cross-sectional study on a convenience sample of 214 subjects with periodontitis seeking oral care in a hospital setting. They received a full-mouth intra-oral examination including dental and periodontal charting by a single calibrated examiner who also established the periodontitis stage diagnosis. Subjects were assessed using the OHIP-14, a validated masticatory dysfunction questionnaire, and a quantitative test based on the ability to mix a dual colour chewing gum. Mixing was quantified based on the variance of hue (VOH) with a colorimetric software. Descriptive, univariate, and multivariate analyses were performed. RESULTS: Subjects with stage IV periodontitis reported greater impairment of oral-health-related quality of life, reduced food intake or altered food type intake attributed to difficulties in chewing, objective measures of masticatory dysfunction, tooth loss, as well as more advanced periodontal breakdown compared with subjects with stages I-III of the disease. Quantitative assessment of masticatory function was associated, in a multivariate analysis, with (i) loss of functional tooth units in the premolar/molar region, presence of hypermobile teeth, and severity of periodontal attachment loss, and (ii) age, body mass index, and periodontitis stage IV and grade C diagnosis. CONCLUSIONS: Subjects with stage IV periodontitis are characterized by a specific set of signs and symptoms of advanced periodontal breakdown and functional impairment, which impact on the quality of life and masticatory function/food intake choices. Stage IV periodontitis captures a clinical entity with distinct features and treatment needs. This study is registered in ClinicalTrials.gov (NCT03928080).

Splint stiffness and extension effects on a simulated avulsed permanent incisor-A patient-specific finite element analysis.

BACKGROUND/AIM: Splinting is an important procedure after avulsion. However, the role of splint stiffness and extension is not fully understood. The aim of this study was to evaluate the effect of splint stiffness and extensions on the mobility and stress on an injured tooth under physiological biting load. MATERIALS AND METHODS: Three-dimensional (3D) finite element models were created from a cone beam computer tomogram of a patient with normal occlusion. An avulsion injury of the right central incisor was created with a 1000 N load application on the palatal of the injured tooth, causing increased socket width. Splints made from four materials were tested: 0.9 mm diameter wire-composite splint (WCS1), 0.4 mm diameter wire-composite splint (WCS2), 1.0 mm diameter nylon-composite splint (NCS), and a 2 mm high by 0.2 mm thick plastic strip composite splint (PSS). Three splint extensions (involving 6, 5, and 3 teeth) were evaluated. Mobility of the avulsed tooth and the maximum principal stress distributions in the adjacent teeth were calculated. RESULTS: The injured incisor tooth mobility was not affected by the splint extensions. The NCS and PSS stabilized the avulsed incisor but allowed, respectively, 10 and 20 times more mobility under horizontal loading than the WCS1, which inhibited most mobility, while the WCS2 allowed double the mobility compared with WCS1. The NCS and PSS allowed more tooth mobility, mainly in the extrusion direction. Splints were 2-3 times more effective in limiting mobility under intrusive loads than extrusive loads. High levels of stress were found at the base of the composite attachments in the adjacent incisors. CONCLUSION: Splinting an avulsed tooth to one or two teeth bilaterally using a nylon splint or a plastic strip is appropriate for tooth stabilization and should be recommended over the 0.4mm wire-composite splint, while the 0.9 mm orthodontic wire is too rigid and not recommended.