Metal (Mo, W, Ti) Carbide Catalysts: Synthesis and Application as Alternative Catalysts for Dry Reforming of Hydrocarbons-A Review.

Dry reforming of hydrocarbons (DRH) is a pro-environmental method for syngas production. It owes its pro-environmental character to the use of carbon dioxide, which is one of the main greenhouse gases. Currently used nickel catalysts on oxide supports suffer from rapid deactivation due to sintering of active metal particles or the deposition of carbon deposits blocking the flow of gases through the reaction tube. In this view, new alternative catalysts are highly sought after. Transition metal carbides (TMCs) can potentially replace traditional nickel catalysts due to their stability and activity in DR processes. The catalytic activity of carbides results from the synthesis-dependent structural properties of carbides. In this respect, this review presents the most important methods of titanium, molybdenum, and tungsten carbide synthesis and the influence of their properties on activity in catalyzing the reaction of methane with carbon dioxide.

Probing CO Generation through Metal-Assisted Alcohol Dehydrogenation in Metal-2-(arylazo)phenol Complexes Using Isotopic Labeling (Metal = Ru, Ir): Synthesis, Characterization, and Cytotoxicity Studies.

The reaction of 2-{2-(benzo[1,3]dioxol-5-yl)- diazo}-4-methylphenol (HL) with [Ru(PPh3)3Cl2] in ethanol resulted in the carbonylated ruthenium complex [RuL(PPh3)2(CO)] (1), wherein metal-assisted decarbonylation via in situ ethanol dehydrogenation is observed. When the reaction was performed in acetonitrile, however, the complex [RuL(PPh3)2(CH3CN)] (2) was obtained as the main product, probably by trapping of a common intermediate through coordination of CH3CN to the Ru(II) center. The analogous reaction of HL with [Ir(PPh3)3Cl] in ethanol did not result in ethanol decarbonylation and instead gave the organoiridium hydride complex [IrL(PPh3)2(H)] (3). Unambiguous evidence for the generation of CO via ruthenium-assisted ethanol oxidation is provided by the synthesis of the 13C-labeled complex, [Ru(PPh3)2L(13CO)] (1A) using isotopically labeled ethanol, CH313CH2OH. To summarize all the evidence, a ruthenium-assisted mechanistic pathway for the decarbonylation and generation of alkane via alcohol dehydrogenation is proposed. In addition, the in vitro antiproliferative activity of complexes 1-3 was tested against human cervical (HeLa) and human colorectal adenocarcinoma (HT-29) cell lines. Complexes 1-3 showed impressive cytotoxicity against both HeLa (half-maximal inhibitory concentration (IC50) value of 3.84-4.22 µM) and HT-29 cancer cells (IC50 values between 3.3 and 4.5 µM). Moreover, the complexes were comparatively less toxic to noncancerous NIH-3T3 cells.

CO and CN- syntheses by [FeFe]-hydrogenase maturase HydG are catalytically differentiated events.

The synthesis and assembly of the active site [FeFe] unit of [FeFe]-hydrogenases require at least three maturases. The radical S-adenosyl-l-methionine HydG, the best characterized of these proteins, is responsible for the synthesis of the hydrogenase CO and CN(-) ligands from tyrosine-derived dehydroglycine (DHG). We speculated that CN(-) and the CO precursor (-):CO2H may be generated through an elimination reaction. We tested this hypothesis with both wild type and HydG variants defective in second iron-sulfur cluster coordination by measuring the in vitro production of CO, CN(-), and (-):CO2H-derived formate. We indeed observed formate production under these conditions. We conclude that HydG is a multifunctional enzyme that produces DHG, CN(-), and CO at three well-differentiated catalytic sites. We also speculate that homocysteine, cysteine, or a related ligand could be involved in Fe(CO)x(CN)y transfer to the HydF carrier/scaffold.

A [11 C] CO dispensing system for rapid screening of carbonylation reactions.

[11 C] CO is a highly versatile synthon that allows for labeling at carbonyl positions of many molecules by means of transition metal-mediated carbonylation reactions. The intrinsic complexity of carbonylation reactions often requires tedious screening of reaction conditions for obtaining satisfying yields. Herein, a [11 C] CO dispending system for performing multiple reactions with a single batch of cyclotron-produced [11 C]CO2 is described. This semiautomated setup allows for more rapid and efficient screening of reactions and reaction conditions compared with the traditional "one beam for one reaction" strategy.

Last-Step Pd-Mediated [11C]CO Labeling of a Moxestrol-Conjugated o-Iodobenzyl Alcohol: From Model Experiments to in Vivo Positron Emission Tomography Studies.

The fast, efficient, and functional group tolerant last-step radiolabeling of bioconjugates is crucial for positron emission tomography (PET) applications. In this context, o-iodobenzyl alcohol based structures were identified as ideal tags for an easy Pd-catalyzed carbonylation after bioconjugation, and a moxestrol-conjugated precursor was chosen as the model compound for the further studies. Despite scale and time constraints, conditions developed with [12C]CO and [13C]CO were easily transferred to the 11C isotope, and the desired radioactive product was obtained in amounts up to 740 MBq with radiochemical purities higher than 99%. Radio-high-performance liquid chromatography analyses of rat blood samples demonstrated excellent in vivo stability within the time of the acquisition. MicroPET-magnetic resonance imaging showed excretion pathways similar to moxestrol, and molecular modeling was also performed to evaluate the potential ability of this conjugate to bind estrogen receptors α. Thus, being both synthetically and biologically suitable, this strategy clears the path to potential novel biotracers for preclinical PET imaging.

Click and Release: A Chemical Strategy toward Developing Gasotransmitter Prodrugs by Using an Intramolecular Diels-Alder Reaction.

Prodrug strategies have been proven to be a very effective way of addressing delivery problems. Much of the chemistry in prodrug development relies on the ability to mask an appropriate functional group, which can be removed under appropriate conditions. However, developing organic prodrugs of gasotransmitters represent unique challenges. This is especially true with carbon monoxide, which does not have an easy "handle" for bioreversible derivatization. By taking advantage of an intramolecular Diels-Alder reaction, we have developed a prodrug strategy for preparations of organic CO prodrugs that are stable during synthesis and storage, and yet readily release CO with tunable release rates under near physiological conditions. The effectiveness of the CO prodrug system in delivering a sufficient quantity of CO for possible therapeutic applications has been studied using a cell culture anti-inflammatory assay and a colitis animal model. These studies fully demonstrate the proof of concept, and lay a strong foundation for further medicinal chemistry work in developing organic CO prodrugs.

Unusual way of suicide by carbon monoxide. Case Report.

OBJECTIVES: Authors discuss the case of a suicide of a 29-year-old man caused by carbon monoxide (CO) intoxication. What the authors found interesting was the unusual way of committing suicide that required good technical skills and expert knowledge. METHODS: The level of carboxyhemoglobin (COHb) in the blood of the deceased man was routinely determined by the modified method by Blackmoore (1970), using gas chromatography/thermal conductivity detection. The level of saturation of the hemoglobin by CO in the collected blood sample is determined relatively to the same sample saturated to 100%. RESULTS: In the blood sample of the deceased man the lethal concentration of COHb of 76.5% was determined. Within the following examinations the blood alcohol concentration of 0.05 g.kg(-1) was determined. Further analysis revealed traces of sertraline, its metabolite N-desmethylsertraline, omeprazole and caffeine in the liver tissue, traces of N-desmethylsertraline, ibuprofen and caffeine in urine sample, and only traces of caffeine in the stomach content and blood samples were proved. To commit suicide the man used a sophisticated double container-system equipped with a timer for controlled generation of CO based on the chemical reaction of concentrated sulphuric acid and formic acid. The used timer was set by an electromechanical timer switch that triggered the fatal reaction of the acids while the man was sleeping. CONCLUSIONS: The authors discuss an unusual case of suicide by CO intoxication rarely seen in the area of forensic medicine and toxicology that is specific due to its sophisticated way of execution.

Research report: Charcoal type used for hookah smoking influences CO production.

A hookah smoker who was treated for severe carbon monoxide poisoning with hyperbaric oxygen reported using a different type of charcoal prior to hospital admission, i.e., quick-light charcoal. This finding led to a study aimed at determining whether CO production differs between charcoals commonly used for hookah smoking, natural and quick-light. Our hypothesis was that quick-light charcoal produces significantly more CO than natural charcoal. A medium-sized hookah, activated charcoal filter, calibrated syringe, CO gas analyzer and infrared thermometer were assembled in series. A single 9-10 g briquette of either natural or quick-light charcoal was placed atop the hookah bowl and ignited. CO output (ppm) and temperature (degrees C) were measured in three-minute intervals over 90 minutes. The mean CO levels produced by quick-light charcoal over 90 minutes was significantly higher (3728 ± 2028) compared to natural charcoal (1730 ± 501 ppm, p = 0.016). However, the temperature was significantly greater when burning natural charcoal (292 ± 87) compared to quick-light charcoal (247 ± 92 degrees C, p = 0.013). The high levels of CO produced when using quick-light charcoals may be contributing to the increase in reported hospital admissions for severe CO poisoning.

Selective visible-light-driven CO2 reduction on a p-type dye-sensitized NiO photocathode.

We present a photocathode assembly for the visible-light-driven selective reduction of CO2 to CO at potentials below the thermodynamic equilibrium in the dark. The photoelectrode comprises a porous p-type semiconducting NiO electrode modified with the visible-light-responsive organic dye P1 and the reversible CO2 cycling enzyme carbon monoxide dehydrogenase. The direct electrochemistry of the enzymatic electrocatalyst on NiO shows that in the dark the electrocatalytic behavior is rectified toward CO oxidation, with the reactivity being governed by the carrier availability at the semiconductor-catalyst interface.

Supramolecular assembly promotes the electrocatalytic reduction of carbon dioxide by Re(I) bipyridine catalysts at a lower overpotential.

The addition of methyl acetamidomethyl groups at the 4,4'-positions of a 2,2'-bipyridyl ligand is found to enhance the rate of a bimolecular reduction mechanism of CO2 by Re(I) fac-tricarbonyl chloride complexes. Electrochemical studies, spectroelectrochemical measurements, and molecular dynamics simulations indicate that these methyl acetamidomethyl groups promote the formation of a hydrogen-bonded dimer. This supramolecular complex catalyzes the reductive disproportionation of CO2 to CO and CO3(2-) at a lower overpotential (ca. 250 mV) than the corresponding single-site 2 e(-) reduction of CO2 to CO and H2O catalyzed by the corresponding model complex with a 4,4'-dimethyl-2,2'-bipyridyl ligand. These findings demonstrate that noncovalent self-assembly can modulate the catalytic properties of metal complexes by favoring alternate catalytic pathways.

Studies of cobalt-mediated electrocatalytic CO2 reduction using a redox-active ligand.

The cobalt complex [Co(III)N4H(Br)2](+) (N4H = 2,12-dimethyl-3,7,11,17-tetraazabicyclo-[11.3.1]-heptadeca-1(7),2,11,13,15-pentaene) was used for electrocatalytic CO2 reduction in wet MeCN with a glassy carbon working electrode. When water was employed as the proton source (10 M in MeCN), CO was produced (fCO= 45% ± 6.4) near the Co(I/0) redox couple for [Co(III)N4H(Br)2](+) (E1/2 = -1.88 V FeCp2(+/0)) with simultaneous H2 evolution (fH2= 30% ± 7.8). Moreover, we successfully demonstrated that the catalytically active species is homogeneous through the use of control experiments and XPS studies of the working glassy-carbon electrodes. As determined by cyclic voltammetry, CO2 catalysis occurred near the formal Co(I/0)redox couple, and attempts were made to isolate the triply reduced compound ("[Co(0)N4H]"). Instead, the doubly reduced ("Co(I)") compounds [CoN4] and [CoN4H(MeCN)](+) were isolated and characterized by X-ray crystallography. Their molecular structures prompted DFT studies to illuminate details regarding their electronic structure. The results indicate that reducing equivalents are stored on the ligand, implicating redox noninnocence in the ligands for H2 evolution and CO2 reduction electrocatalysis.

Self-sufficient and exclusive oxygenation of methane and its source materials with oxygen to methanol via metgas using oxidative bi-reforming.

A combination of complete methane combustion with oxygen of the air coupled with bi-reforming leads to the production of metgas (H2/CO in 2:1 mole ratio) for exclusive methanol synthesis. The newly developed oxidative bi-reforming allows direct oxygenation of methane to methanol in an overall economic and energetically efficient process, leaving very little, if any, carbon footprint or byproducts.

Ring-shaped Re(I) multinuclear complexes with unique photofunctional properties.

We synthesized for the first time a series of emissive ring-shaped Re(I) complexes (Re-rings) with various numbers of Re(I) units and various lengths of bridge ligands. The photophysical properties of the Re-rings could be varied widely through changes in the size of the central cavity. A smaller central cavity of the Re-rings induced intramolecular π-π interactions between the ligands and consequently caused a stronger emission and a longer lifetime of the excited state. The Re-rings can function as efficient and durable photosensitizers. The combination of a trinuclear Re-ring photosensitizer with fac-[Re(bpy)(CO)3(MeCN)](+) (bpy = 2,2'-bipyridine) as a catalyst photocatalyzed CO2 reduction with the highest quantum yield of 82%.

Manganese as a substitute for rhenium in CO2 reduction catalysts: the importance of acids.

Electrocatalytic properties, X-ray crystallographic studies, and infrared spectroelectrochemistry (IR-SEC) of Mn(bpy-tBu)(CO)3Br and [Mn(bpy-tBu)(CO)3(MeCN)](OTf) are reported. Addition of Brönsted acids to CO2-saturated solutions of these Mn complexes and subsequent reduction of the complexes lead to the stable and efficient production of CO from CO2. Unlike the analogous Re catalysts, these Mn catalysts require the addition of Brönsted acids for catalytic turnover. Current densities up to 30 mA/cm(2) were observed during bulk electrolysis using 5 mM Mn(bpy-tBu)(CO)3Br, 1 M 2,2,2-trifluoroethanol, and a glassy carbon working electrode. During bulk electrolysis at -2.2 V vs SCE, a TOF of 340 s(-1) was calculated for Mn(bpy-tBu)(CO)3Br with 1.4 M trifluoroethanol, corresponding to a Faradaic efficiency of 100 ± 15% for the formation of CO from CO2, with no observable production of H2. When compared to the analogous Re catalysts, the Mn catalysts operate at a lower overpotential and exhibit similar catalytic activities. X-ray crystallography of the reduced species, [Mn(bpy-tBu)(CO)3](-), shows a five-coordinate Mn center, similar to its rhenium analogue. Three distinct species were observed in the IR-SEC of Mn(bpy-tBu)(CO)3Br. These were of the parent Mn(bpy-tBu)(CO)3Br complex, the dimer [Mn(bpy-tBu)(CO)3]2, and the [Mn(bpy-tBu)(CO)3](-) anion.

A convenient method to produce [(14) C]carbon monoxide and its application to the radiosynthesis of [carboxyl-(14) C]celivarone, [carboxyl-(14) C]SSR149744.

[carboxyl-(14) C]Celivarone was synthesised from barium [(14) C]carbonate with overall radiochemical yields in the range 49-53%. The synthetic route involves [(14) C]carbonylation methodology, which both decreased the number of synthetic steps and increased the yields obtained from previous synthetic routes.

Aqueous CO2 reduction at very low overpotential on oxide-derived Au nanoparticles.

Carbon dioxide reduction is an essential component of many prospective technologies for the renewable synthesis of carbon-containing fuels. Known catalysts for this reaction generally suffer from low energetic efficiency, poor product selectivity, and rapid deactivation. We show that the reduction of thick Au oxide films results in the formation of Au nanoparticles ("oxide-derived Au") that exhibit highly selective CO(2) reduction to CO in water at overpotentials as low as 140 mV and retain their activity for at least 8 h. Under identical conditions, polycrystalline Au electrodes and several other nanostructured Au electrodes prepared via alternative methods require at least 200 mV of additional overpotential to attain comparable CO(2) reduction activity and rapidly lose their activity. Electrokinetic studies indicate that the improved catalysis is linked to dramatically increased stabilization of the CO(2)(•-) intermediate on the surfaces of the oxide-derived Au electrodes.

A general chelate-assisted co-assembly to metallic nanoparticles-incorporated ordered mesoporous carbon catalysts for Fischer-Tropsch synthesis.

The organization of different nano objects with tunable sizes, morphologies, and functions into integrated nanostructures is critical to the development of novel nanosystems that display high performances in sensing, catalysis, and so on. Herein, using acetylacetone as a chelating agent, phenolic resol as a carbon source, metal nitrates as metal sources, and amphiphilic copolymers as a template, we demonstrate a chelate-assisted multicomponent coassembly method to synthesize ordered mesoporous carbon with uniform metal-containing nanoparticles. The obtained nanocomposites have a 2-D hexagonally arranged pore structure, uniform pore size (~4.0 nm), high surface area (~500 m(2)/g), moderate pore volume (~0.30 cm(3)/g), uniform and highly dispersed Fe(2)O(3) nanoparticles, and constant Fe(2)O(3) contents around 10 wt %. By adjusting acetylacetone amount, the size of Fe(2)O(3) nanoparticles is readily tunable from 8.3 to 22.1 nm. More importantly, it is found that the metal-containing nanoparticles are partially embedded in the carbon framework with the remaining part exposed in the mesopore channels. This unique semiexposure structure not only provides an excellent confinement effect and exposed surface for catalysis but also helps to tightly trap the nanoparticles and prevent aggregating during catalysis. Fischer-Tropsch synthesis results show that as the size of iron nanoparticles decreases, the mesoporous Fe-carbon nanocomposites exhibit significantly improved catalytic performances with C(5+) selectivity up to 68%, much better than any reported promoter-free Fe-based catalysts due to the unique semiexposure morphology of metal-containing nanoparticles confined in the mesoporous carbon matrix.

Theoretical study of atomic oxygen on gold surface by Hückel theory and DFT calculations.

It is fundamental to understand the behavior of atomic oxygen on gold surfaces so as to elucidate the mechanism of nano gold catalysts for low-temperature CO oxidation reactions since the atomic oxygen on gold system is an important intermediate involved in both the processes of O(2) dissociation and CO oxidation. We performed theoretical analysis of atomic oxygen adsorption on gold by using Hückel theory. It is found that formation of linear O-Au-O structure on Au surfaces greatly stabilizes the atomic oxygen adsorption due to stronger bond energy and bond order, which is confirmed subsequently by density functional theory (DFT) calculations. The linear O-Au-O structure may explain the surprising first order kinetics behavior of O(2) desorption from gold surfaces. This view of the linear O-Au-O structure as the natural adsorption status is quite different from the conventional view, which may lead to new understanding toward the reaction mechanism of low-temperature CO oxidation reaction on nano gold catalysts.

Ex situ generation of stoichiometric and substoichiometric 12CO and 13CO and its efficient incorporation in palladium catalyzed aminocarbonylations.

A new technique for the ex situ generation of carbon monoxide (CO) and its efficient incorporation in palladium catalyzed carbonylation reactions was achieved using a simple sealed two-chamber system. The ex situ generation of CO was derived by a palladium catalyzed decarbonylation of tertiary acid chlorides using a catalyst originating from Pd(dba)(2) and P(tBu)(3). Preliminary studies using pivaloyl chloride as the CO-precursor provided an alternative approach for the aminocarbonylation of 2-pyridyl tosylate derivatives using only 1.5 equiv of CO. Further design of the acid chloride CO-precursor led to the development of a new solid, stable, and easy to handle source of CO for chemical transformations. The synthesis of this CO-precursor also provided an entry point for the late installment of an isotopically carbon-labeled acid chloride for the subsequent release of gaseous [(13)C]CO. In combination with studies aimed toward application of CO as the limiting reagent, this method provided highly efficient palladium catalyzed aminocarbonylations with CO-incorporations up to 96%. The ex situ generated CO and the two-chamber system were tested in the synthesis of several compounds of pharmaceutical interest and all of them were labeled as their [(13)C]carbonyl counterparts in good to excellent yields based on limiting CO. Finally, palladium catalyzed decarbonylation at room temperature also allowed for a successful double carbonylation. This new protocol provides a facile and clean source of gaseous CO, which is safely handled and stored. Furthermore, since the CO is generated ex situ, excellent functional group tolerance is secured in the carbonylation chamber. Finally, CO is only generated and released in minute amounts, hence, eliminating the need for specialized equipment such as CO-detectors and equipment for running high pressure reactions.

From HCOOH to CO at Pd electrodes: a surface-enhanced infrared spectroscopy study.

The decomposition of HCOOH on Pd surfaces over a potential range of practical relevance to hydrogen production and fuel cell anode operation was probed by combining high-sensitivity in situ surface-enhanced IR spectroscopy with attenuated total reflection and thin-layer flow cell configurations. For the first time, concrete spectral evidence of CO(ad) formation has been obtained, and a new main pathway from HCOOH to CO(ad) involving the reduction of the dehydrogenation product of HCOOH (i.e., CO(2)) is proposed.