The Preparation and Physiochemical Characterization of Tenebrio molitor Chitin Using Alcalase.

Chitin is mostly produced from crustaceans, but it is difficult to supply raw materials due to marine pollution, and the commonly used chemical chitin extraction method is not environmentally friendly. Therefore, this study aims to establish a chitin extraction process using enzymes and to develop edible insect-derived chitin as an eco-friendly new material. The response surface methodology (RSM) was used to determine the optimal conditions for enzymatic hydrolysis. The optimal conditions for enzymatic hydrolysis by RSM were determined to be the substrate concentration (7.5%), enzyme concentration (80 µL/g), and reaction time (24 h). The solubility and DDA of the mealworm chitosan were 45% and 37%, respectively, and those of the commercial chitosan were 61% and 57%, respectively. In regard to the thermodynamic properties, the exothermic peak of mealworm chitin was similar to that of commercial chitin. In the FT-IR spectrum, a band was observed in mealworm chitin corresponding to the C=O of the NHCOCH3 group at 1645 cm-1, but this band showed low-intensity C=O in the mealworm chitosan due to deacetylation. Collectively, mealworm chitosan shows almost similar physical and chemical properties to commercial chitosan. Therefore, it is shown that an eco-friendly process can be introduced into chitosan production by using enzyme-extracted mealworms for chitin/chitosan production.

CNTs-CaP/chitosan-coated AZ91D magnesium alloy extract promoted rat dorsal root ganglia neuron growth via activating ERK signalling pathway.

Increasing attention has been paid on the application of biodegradable materials such as magnesium and its alloys in neuron repair. AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated in this study. To evaluate the bioactivity of these AZ91D-based composites, the extracts were prepared by immersing samples in modified simulated body fluid (m-SBF) for 0, 2, 8, 16, 24, 34, 44, 60, or 90 days. Immunofluorescence staining for neuronal class III ß-tubulin (TUJ1) revealed that both CNTs-CaP/CS-AZ91D and CaP/CS-AZ91D extracts promoted axon outgrowth of dorsal root ganglia (DRG) neurons, accompanied with increased expression of phosphorylated focal adhesion kinase (p-FAK) and growth associated protein-43 (GAP-43). Besides, the extracts increased the expression and the release of neurotrophic factors including nerve growth factor (NGF) and brain-derived neurotrophic factor (BDNF). ERK signalling was activated in DRG neurons after treating with either CNTs-CaP/CS-AZ91D or CaP/CS-AZ91D extracts, and its inhibition with U0126 counteracted the beneficial effects of these extracts on DRG neuron. Overall, the extracts from these AZ91D-based composites might promote DRG neuron growth via activating ERK signalling pathway. Notably, CNTs-CaP/CS-AZ91D extracts showed a better promoting effect on neuron growth than CaP/CS-AZ91D. Assessment of ion elements showed that the addition of CNTs coating enhanced magnesium corrosion resistance and reduced the deposition of calcium and phosphorus on the surface of CaP/CS-AZ91D alloy. These findings demonstrate that CNTs-CaP/CS-AZ91D likely provide a more suitable environment for neuron growth, which suggests a potential implantable biomaterial for the treatment of nerve injury. SIGNIFICANCE: AZ91D magnesium alloy coated with carbon nanotubes (CNTs) and/or calcium phosphate (CaP)/chitosan (CS) was fabricated and their immersion extracts were prepared using modified simulated body fluid in this study. Both extracts from CNTs-CaP/CS and CaP/CS-coated AZ91D magnesium alloy promotes rat dorsal root ganglia (DRG) neuron growth via activating ERK signalling pathway. Notably, the addition of CNTs improves the performance of CaP/CS-AZ91D. For the first time, our research demonstrates that CNTs-CaP/CS-AZ91D likely provide a suitable environment for neuron growth, suggesting these AZ91D-based composites as potential implantable biomaterials for the treatment of nerve injury.

Chemical Proprieties of Biopolymers (Chitin/Chitosan) and Their Synergic Effects with Endophytic Bacillus Species: Unlimited Applications in Agriculture.

Over the past decade, reckless usage of synthetic pesticides and fertilizers in agriculture has made the environment and human health progressively vulnerable. This setting leads to the pursuit of other environmentally friendly interventions. Amongst the suggested solutions, the use of chitin and chitosan came about, whether alone or in combination with endophytic bacterial strains. In the framework of this research, we reported an assortment of studies on the physico-chemical properties and potential applications in the agricultural field of two biopolymers extracted from shrimp shells (chitin and chitosan), in addition to their uses as biofertilizers and biostimulators in combination with bacterial strains of the genus Bacillus sp. (having biochemical and enzymatic properties).

Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review.

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.

Effects of Chitosan on Clostridium perfringens and Application in the Preservation of Pork Sausage.

The effects of chitosan with 95% deacetylation degree (DD95) on the spore germination, cell proliferation, and heat resistance of Clostridium perfringens CCRC 10,648 and CCRC 13,019 were investigated, and its application on pork sausage with sodium nitrite reduction was also evaluated. DD95 chitosan can strongly reduce the heat resistance of both strains. The D80 and D100 values for strain CCRC 13,019 decreased from 40.98 and 4.64 min to 39.21 and 3.26 min, respectively, as a result of adding 250 ppm DD95; meanwhile, addition of chitosan decreased the D80 and D100 values for CCRC 10,648 from 41.15 and 6.46 min to 39.52 and 3.78 min, respectively. In pork sausage, addition of 3000 ppm DD95 chitosan considerably slowed down the bacterial proliferation and volatile basic nitrogen production. There were no significant differences in color (L* and b* values), shearing force, and hardness in the pork sausages with or without DD95 chitosan during storage at 4 and 25 °C. However, the addition of DD95 chitosan in pork sausage significantly retarded the decrease of the a* value. Therefore, DD95 chitosan could reduce the concentration of sodium nitrite required in pork sausages for color retention.

Antioxidant, Cytotoxic and Antimicrobial Activity of Chitosan Preparations Extracted from Ganoderma Lucidum Mushroom.

Two chitosan extracts were prepared by chemical and enzymatic treatment of Ganoderma lucidum mushroom, as an alternative source to crustacean shells. The molecular weight of the enzymatic extract was lower than that of the chemical one and of shrimp chitosan, as determined by viscosity measurements. Characteristic signals were identified in the 1 H-NMR spectra and high deacetylation degree indicated good physico-chemical properties for both mushroom chitosan extracts. The scavenging capacity of mushroom chitosan extracts was moderate against the synthetic radicals of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH), but higher values were observed for the enzymatic extract, compared to the chemical extract and shrimp chitosan. In vitro cytotoxicity was evaluated in L929 mouse fibroblast cell lines and the results of MTT assay showed good cytocompatibility in the tested range of concentrations. The growth of Gram-positive bacteria was inhibited more than Gram-negative bacteria in the presence of mushroom chitosan extracts, in particular by the chemical one, indicating their efficiency as antimicrobial agents. All these results strengthen the evidence of mushroom polysaccharide preparations availability for biomedical applications.

The Potential of Insects as Alternative Sources of Chitin: An Overview on the Chemical Method of Extraction from Various Sources.

Chitin, being the second most abundant biopolymer after cellulose, has been gaining popularity since its initial discovery by Braconot in 1811. However, fundamental knowledge and literature on chitin and its derivatives from insects are difficult to obtain. The most common and sought-after sources of chitin are shellfish (especially crustaceans) and other aquatic invertebrates. The amount of shellfish available is obviously restricted by the amount of food waste that is allowed; hence, it is a limited resource. Therefore, insects are the best choices since, out of 1.3 million species in the world, 900,000 are insects, making them the most abundant species in the world. In this review, a total of 82 samples from shellfish-crustaceans and mollusks (n = 46), insects (n = 23), and others (n = 13)-have been collected and studied for their chemical extraction of chitin and its derivatives. The aim of this paper is to review the extraction method of chitin and chitosan for a comparison of the optimal demineralization and deproteinization processes, with a consideration of insects as alternative sources of chitin. The methods employed in this review are based on comprehensive bibliographic research. Based on previous data, the chitin and chitosan contents of insects in past studies favorably compare and compete with those of commercial chitin and chitosan-for example, 45% in Bombyx eri, 36.6% in Periostracum cicadae (cicada sloughs), and 26.2% in Chyrysomya megacephala. Therefore, according to the data reported by previous researchers, demonstrating comparable yield values to those of crustacean chitin and the great interest in insects as alternative sources, efforts towards comprehensive knowledge in this field are relevant.

Insight into Physicochemical, Rheological, and Antibacterial Properties of Chitosan Extracted from Antarctic krill: A Comparative Study.

In this work, physicochemical, rheological, and antibacterial properties of chitosan (CS) extracted from white shrimp (WS), giant river prawn (GP), and Antarctic krill (AK) were investigated. The results demonstrated that molecular weight (MW) of commercial chitosan (CCS), WSCS, GPCS, and AKCS were 1175.8, 2130.4, 1293.3, and 1109.3 kDa with the degree of deacetylation (DDA) of 73.5, 74.1, 82.1, and 75.9%, respectively. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and scanning electron microscope (SEM) were employed to study the structural differences of CS. Moreover, storage modulus (G') and loss modulus (G″) of AKCS were lower than that of WSCS and GPCS, respectively, but higher than that of CCS. Minimum inhibitory concentration (MIC) and minimum bacterial concentration (MBC) of CS against Escherichia coli and Staphylococcus aureus were investigated at concentration between 0.0125 and 1 mg/mL. These results highlighted that AKCS with low viscoelastic properties had a potential application in food and pharmaceutical application.

Chitosan Oligosaccharides Attenuate Amyloid Formation of hIAPP and Protect Pancreatic ß-Cells from Cytotoxicity.

The deposition of aggregated human islet amyloid polypeptide (hIAPP) in the pancreas, that has been associated with ß-cell dysfunction, is one of the common pathological features of patients with type 2 diabetes (T2D). Therefore, hIAPP aggregation inhibitors hold a promising therapeutic schedule for T2D. Chitosan oligosaccharides (COS) have been reported to exhibit a potential antidiabetic effect, but the function of COS on hIAPP amyloid formation remains elusive. Here, we show that COS inhibited the aggregation of hIAPP and disassembled preformed hIAPP fibrils in a dose-dependent manner by thioflavin T fluorescence assay, circular dichroism spectroscopy, and transmission electron microscope. Furthermore, COS protected mouse ß-cells from cytotoxicity of amyloidogenic hIAPP, as well as apoptosis and cycle arrest. There was no direct binding of COS and hIAPP, as revealed by surface plasmon resonance analysis. In addition, both chitin-oligosaccharide and the acetylated monosaccharide of COS and glucosamine had no inhibition effect on hIAPP amyloid formation. It is presumed that, mechanistically, COS regulate hIAPP amyloid formation relating to the positive charge and degree of polymerization. These findings highlight the potential role of COS as inhibitors of hIAPP amyloid formation and provide a new insight into the mechanism of COS against diabetes.

Recent development trends for chiral stationary phases based on chitosan derivatives, cyclofructan derivatives and chiral porous materials in high performance liquid chromatography.

The separation of enantiomers by chromatographic methods, such as gas chromatography, high-performance liquid chromatography and capillary electrochromatography, has become an increasingly significant challenge over the past few decades due to the demand of pharmaceutical, agrochemical, and food analysis. Among these chromatographic resolution methods, high-performance liquid chromatography based on chiral stationary phases has become the most popular and effective method used for the analytical and preparative separation of optically active compounds. This review mainly focuses on the recent development trends for novel chiral stationary phases based on chitosan derivatives, cyclofructan derivatives, and chiral porous materials that include metal-organic frameworks and covalent organic frameworks in high-performance liquid chromatography. The enantioseparation performance and chiral recognition mechanisms of these newly developed chiral selectors toward enantiomers are discussed in detail.

Extraction and characterization of high purity chitosan by rapid and simple techniques from mud crabs taken from Abbottabad.

Chitosan and chitosan based materials offer diverse applications in the field of biotechnology, nanotechnology, pharmaceuticals, environmental protection and tissue engineering due to their various biological and physicochemical properties. Major sources of chitosan are shrimps, crabs and lobsters. Properties of chitosan differ with the degree of deacetylation and the molecular weight. Researchers are investigating to produce high quality chitosan in cost effective and time efficient way which was the aim of present study. The exoskeleton of mud crabs, taken from Abbottabad, was demineralized with 2mol/dm3 H2SO4 solution for 4hour and then, deproteinized with 2mol/dm3 NaOH solution for 4hour at room temperature. Yield of crude chitin was 78% which was deacetylated with 55% NaOH solution at 110°C for 4hour to obtain chitosan. After precipitation, the yield of pure chitosan form the crab shell was 39%. The degree of deacetylation of chitosan was 92% measured by potentiometric titration and the molecular weight was 1.2×106g/mol (1200KD), determined by viscometric method. We concluded that a high quality chitosan can be produced at commercial level in Pakistan by rapid and simple techniques.

Controlled depolymerisation assessed by analytical ultracentrifugation of low molecular weight chitosan for use in archaeological conservation.

The heterogeneity and molecular weight of a chitosan of low molecular weight (molar mass) and low degree of acetylation (0.1) for potential use as a consolidant for decayed archaeological wood were examined by sedimentation velocity and sedimentation equilibrium in the analytical ultracentrifuge before and after depolymerisation. Sedimentation velocity before depolymerisation revealed a uniform distribution of sedimentation coefficient with little concentration dependence. SEDFIT-MSTAR analysis revealed a weight average molecular weight Mw of (14.2 ± 1.2) kDa, and polydispersity index of ~ 1.2. Further analysis using MULTISIG revealed a distribution of material between 2 and 20 kDa and consistent with the weight average Mw. Controlled depolymerisation using hydrogen peroxide and ultra-violet radiation in an acetic acid medium reduced this to (4.9 ± 0.7) kDa, with a similar polydispersity. The depolymerised material appears to be within the range that has been predicted to fully penetrate into archaeological wood. The consequences for this finding and the use of the analytical ultracentrifuge in wood conservation strategies are considered.

Synthesis and Application of Scaffolds of Chitosan-Graphene Oxide by the Freeze-Drying Method for Tissue Regeneration.

Several biomaterials, including natural polymers, are used to increase cellular interactions as an effective way to treat bone injuries. Chitosan (CS) is one of the most studied biocompatible natural polymers. Graphene oxide (GO) is a carbon-based nanomaterial capable of imparting desired properties to the scaffolds. In the present study, CS and GO were used for scaffold preparation. CS was extracted from the mycelium of the fungus Aspergillus niger. On the other hand, GO was synthesized using an improved Hummers-Offemann method and was characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD), and dynamic light scattering (DLS). Subsequently, three formulations (GO 0%, 0.5%, and 1%) were used to prepare the scaffolds by the freeze-drying technique. The scaffolds were characterized by FTIR, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM), to determine their thermal stability and pore size, demonstrating that their stability increased with the increase of GO amount. Finally, the scaffolds were implanted, recollected 30 days later, and studied with an optical microscope, which evidenced the recovery of the tissue architecture and excellent biocompatibility. Hence, these results strongly suggested the inherent nature of chitosan/graphene oxide (CS/GO) scaffolds for their application in bone tissue regeneration.

X-ray crystal structure of anhydrous chitosan at atomic resolution.

We determined the crystal structure of anhydrous chitosan at atomic resolution, using X-ray fiber diffraction data extending to 1.17 Å resolution. The unit cell [a = 8.129(7) Å, b = 8.347(6) Å, c = 10.311(7) Å, space group P21 21 21 ] of anhydrous chitosan contains two chains having one glucosamine residue in the asymmetric unit with the primary hydroxyl group in the gt conformation, that could be directly located in the Fourier omit map. The molecular arrangement of chitosan is very similar to the corner chains of cellulose II implying similar intermolecular hydrogen bonding between O6 and the amine nitrogen atom, and an intramolecular bifurcated hydrogen bond from O3 to O5 and O6. In addition to the classical hydrogen bonds, all the aliphatic hydrogens were involved in one or two weak hydrogen bonds, mostly helping to stabilize cohesion between antiparallel chains. © 2016 Wiley Periodicals, Inc. Biopolymers 105: 361-368, 2016.

Biodegradation kinetics of thin-stillage treatment by Aspergillus awamori and characterization of recovered chitosan.

An attempt has been made to provide solution for distillery wastewater using fungal pretreatment followed by an anaerobic process to achieve higher organic matter removal, which is a challenge at present with currently adopted technologies. Submerged growth kinetics of distillery wastewater supernatant by Aspergillus awamori was also evaluated. The proposed kinetic models using a logistic equation for fungal growth and the Leudeking-Piret equation for product formation were validated experimentally, and substrate consumption equation was derived using estimated kinetic coefficients. Up to 59.6 % chemical oxygen demand (COD) and 70 % total organic carbon (TOC) removals were observed in 96 h of fungal incubation. Maximum specific growth rate of fungi, coefficient of biomass yield on substrate and growth-associated product formation coefficient were estimated to be 0.07 ± 0.01 h(-1), 0.614 kg biomass/kg utilized COD and 0.215 kg CO2/kg utilized TOC, respectively. The chitosan recovery of 0.072-0.078 kg/kg of dry mycelium was obtained using dilute sulphuric acid extraction, showing high purity and characteristic chitosan properties according to FTIR and XRD analyses. After anaerobic treatment of the fungal pretreated effluent with COD concentration of 7.920 ± 0.120 kg COD/m(3) (organic loading rate of 3.28 kg COD/m(3) day), overall COD reduction of 91.07 % was achieved from distillery wastewater.

Structural Characterization of Oligochitosan Elicitor from Fusarium sambucinum and Its Elicitation of Defensive Responses in Zanthoxylum bungeanum.

Oligosaccharide elicitors from pathogens have been shown to play major roles in host plant defense responses involving plant-pathogen chemoperception and interaction. In the present study, chitosan and oligochitosan were prepared from pathogen Fusarium sambucinum, and their effects on infection of Zanthoxylum bungeanum stems were investigated. Results showed that oligochitosan inhibited the infection of the pathogen, and that the oligochitosan fraction with a degree of polymerization (DP) between 5 and 6 showed the optimal effect. Oligochitosan DP5 was purified from fraction DP5-6 and was structurally characterized using electrospray ionization mass spectrometry, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy. Oligochitosan DP5 showed significant inhibition against the infection of the pathogenic fungi on host plant stems. An investigation of the mechanism underlying this effect showed that oligochitosan DP5 increased the activities of defensive enzymes and accumulation of phenolics in host Z. bungeanum. These results suggest that oligochitosan from pathogenic fungi can mediate the infection of host plants with a pathogen by acting as an elicitor that triggers the defense system of a plant. This information will be valuable for further exploration of the interactions between the pathogen F. sambucinum and host plant Z. bungeanum.

Antioxidant and antimicrobial proprieties of chitin and chitosan extracted from Parapenaeus Longirostris shrimp shell waste.

INTRODUCTION: Chitosan, the linear polymer, is produced by alkali deacetylation of chitin (CHI). Recently chitin and chitosan were attracted marked interest due to their biocompatibility, biodegradability and non-toxicity. MATERIALS AND METHODS: In this study, chitin was extracted from shrimp shell (Parapenaeus longirostris) and chitosan was deacetylated by classical and ultrasound-assisted method. The identification of functional groups and the determination of degree of deacetylation of chitin (CHI), classical deacetylated chitosan (CDC) and ultrasound-assisted deacetylated chitosan (UDC) were carried through Fourier Transform-Infrared Spectroscopy. Their antimicrobial and antioxidant activity were also investigated. RESULTS: The degree of deacetylation of CHI, CDC and UDC is 33.64%, 73.68% and 83.55%, respectively. Results showed that CHI, CDC and UDC exhibited a good antimicrobial activity against (S. aureus, E. coli, P. aeruginosa, K. pneumonia) and (C. albicans and C. parapsilosis). The scavenging ability of CHI, CDC and UDC on 1,1-diphenyl-2-picrylhydrazyl radicals is ranging from 4.71% to 21.25%, 11.45% to 32.78% and 18.27% to 44.17%, respectively, at the concentrations of 0.25 to 1mg/mL. The inhibition of lipid peroxidation with thiobarbituric acid-reacting substances is ranging from 11.7% to 51.63%, 17.24% to 63.52% and 29.31% to 77.39%, respectively, at varying concentrations of 0.25 to 1mg/mL. CONCLUSION: The effectiveness of CHI, CDC and UDC is correlated with their degree of deacetylation. The results indicate the possibility of exploiting chitin and chitosan as antimicrobial agent.

Chitin and chitosan preparation from marine sources. Structure, properties and applications.

This review describes the most common methods for recovery of chitin from marine organisms. In depth, both enzymatic and chemical treatments for the step of deproteinization are compared, as well as different conditions for demineralization. The conditions of chitosan preparation are also discussed, since they significantly impact the synthesis of chitosan with varying degree of acetylation (DA) and molecular weight (MW). In addition, the main characterization techniques applied for chitin and chitosan are recalled, pointing out the role of their solubility in relation with the chemical structure (mainly the acetyl group distribution along the backbone). Biological activities are also presented, such as: antibacterial, antifungal, antitumor and antioxidant. Interestingly, the relationship between chemical structure and biological activity is demonstrated for chitosan molecules with different DA and MW and homogeneous distribution of acetyl groups for the first time. In the end, several selected pharmaceutical and biomedical applications are presented, in which chitin and chitosan are recognized as new biomaterials taking advantage of their biocompatibility and biodegradability.

Isolation of chitosan from Ganoderma lucidum mushroom for biomedical applications.

Chitin biopolymer production and its by-product chitosan show great potential. These biomaterials have great applicability in various fields because they are non-toxic, biodegradable, biocompatible, and have antimicrobial effects. The most common source of chitin and chitosan is the crustaceous shell; however, mushrooms are an alternative source for isolating these biopolymers because their cellular wall has a high content of chitin, which may be transformed into chitosan through a deacetylation reaction. The main objective of this research was to obtain chitosan through the deacetylation of chitin isolated from the Ganoderma lucidum basidiomycetes mushroom, which is obtained through biotechnological culture. The material characterization was performed using X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, and an evaluation of cytotoxicity comparing the results obtained with results for commercial chitosan. Protocol results showed that chitosan obtained from this mushroom had a significant similitude with commercial chitosan, yet the one obtained using P2 protocol was the one that rendered the best results: including diffractogram peaks, characteristic infrared analysis bands, and an 80.29 % degree of deacetylation. Cytotoxicity in vitro testing showed that the material was non-toxic; furthermore, it rendered very promising information regarding the evaluation of future applications of this biomaterial in the field of biomedicine.

Effect of the characters of chitosans used and regeneration conditions on the yield and physicochemical characteristics of regenerated products.

The objective of this study was to explore the effect of the character of chitosans used, and the regeneration conditions employed on, the yield and physicochemical characteristics of regenerated products. Different concentrations of acetic acid were used to dissolve chitosans of 61.7% and 94.9% degree of deacetylation (DD), and weight-average molecular weight (Mw) of 176 and 97 kDa, respectively; they were then precipitated with an 8 N NaOH solution, followed by washing and neutral and freeze drying to get the regenerated products. Yields of regenerated products and their physicochemical properties, such as ash content, bulk density, Mw, polydispersity index (PDI), DD, and crystallinity were measured. A higher concentration of acetic acid used resulted in a higher yield. The purity of the regenerated product increased significantly, whereas the bulk density and crystallinity decreased significantly after regeneration. The regeneration process showed its merits of narrowing down the PDI of regenerated products. The DD and structure of chitosan was changed insignificantly after the regeneration process.