Eyelid retraction during smiling in a patient with monocular congenital ptosis: a case report.

BACKGROUND: Blepharoptosis is a common symptom in ophthalmology clinic, but eyelid retraction when smiling in a ptosis eye is a rare manifestation. Here we report a novel manifestation that eyelid retraction during smiling in a patient with monocular congenital ptosis. CASE DESCRIPTION: A 10-year-old girl with isolated and mild unilateral congenital ptosis showed eyelid retraction in ptotsis eye when smiling together with a lid lag on downgaze. She didn't have any systematic and ocular diseases other than myopia and astigmatism.Eyelid retraction during smiling is 5 mm, resulting in a significant difference in the height of bilateral palpebral fissures.As for ptosis, is mild.The margin to reflex distance 1 is 1.0 mm on the right eye(ptosis eye) and 3.0 mm on the left eye. A lid lag of 1.0 mm on downward gaze was noted on the right, she could close her eyes fully while sleeping.The ice pack test, laboratory test for thyroid function, whole-exome sequencing (WES) and magnetic resonance imaging(MRI) of the orbital and ocular motor nerves showed normal results.Her symptoms alleviated after 6 months, with the retraction of the right upper eyelid when smiling was approximately 3 mm, thus the difference in the palpebral fissure height when smiling was smaller than that at the initial presentation. CONCLUSION: Blepharoptosis may accompanied with abnormal innervation like eyelid retraction, this phenomenon can be alleviated with age.The results of the levator muscle function test should be carefully examined to determine whether it is ptosis in an impaired innervation eyelid.

Customized planning of the visible maxillary arch width in harmony with interparopia width and smile width for female facial aesthetics.

BACKGROUND: The visible maxillary arch width (VAW) is an important aesthetic-determining feature. To date, there is no well-established methodology to determine the aesthetically optimal VAW in customized treatment planning. METHODS: In this study, the common traits of the dentofacial configuration were investigated in most attractive Asian and Caucasian female smiles. The smiling photo of a subject was digitally modified based on combined variations of VAW, smile width (SW), transverse facial dimensions (TFD), and vertical facial dimensions. These modified photos were assessed for aesthetics. The aesthetically essential parameters were identified, and their mathematic correlations and reference ranges were determined for different vertical facial patterns. Using the obtained results, a mathematic guidance was constructed for customized smile designing. The applicability of this guidance was tested in Asian females. RESULTS: The most attractive Asian and Caucasian female smiles have intraracial and interracial commonalities in the VAW-to-TFD ratios. The interparopia width (IPD) predominated over facial widths in determining well-matched VAW and SW. For optimal smile aesthetics, the VAW and SW were correlated as simulated by the formula 1.92 IPD ≤ VAW + 2.3 SW ≤ 2.17 IPD, plus the VAW-to-IPD ratio within 0.54 to 0.62 and the SW-to-IPD ratio within 0.61 to 0.71, ranges tailored to vertical facial patterns. This constitutes a mathematic guidance for customized planning of the aesthetically optimal VAW. This guidance was preliminarily validated to be applicable to Asian females. CONCLUSIONS: The VAW-to-TFD ratios were essential for Caucasian and Asian female smile aesthetics. The mathematic guidance could serve as a reference for customized smile designs for Asian females.

Malocclusion or laterorhinia: Which one impacts aesthetic facial perception the most?

INTRODUCTION: This study aimed to evaluate the perception of facial attractiveness when nose and teeth, together or isolated, present different degrees of disharmony. The secondary objective was to compare the perception of laypersons with that of dentists. MATERIALS AND METHODS: This cross-sectional observational study included 112 individuals (58 laypersons and 54 dentists) that evaluated 6 manipulated images of the face of the same model, scoring their attractiveness using 10 cm Visual Analogue Scales (VAS), with least and most attractive at the left and right anchors, respectively. The images contained manipulations performed only on the nose (laterorhinia) and mouth (misaligned teeth), as follows: (1) standard photograph, with symmetrical nose + aligned teeth; (2) 2 mm nasal deviation + aligned teeth; (3) 4 mm nasal deviation + aligned teeth; (4) symmetrical nose + misaligned teeth; (5) 2 mm nasal deviation + misaligned teeth and (6) 4 mm nasal deviation + misaligned teeth. We used the repeated measures ANOVA test and Tukey's post-test for intra-group comparison of the images. The independent t-test was used for inter-group comparison of each image. RESULTS: In the laypersons' group, the highest grades were given to images with aligned teeth and the lowest to misaligned teeth (smallest mean difference = 2.88 cm). For this group, there was no statistically significant difference (P-values ranged from .988 to 1.000) between scores of the three images in which teeth were aligned (range of 7.70-7.78 cm). In the group of dentists, highest grades were given to images with aligned teeth and the lowest to misaligned teeth. Difference between images 3 and 4 was not statistically significant (P = .204). All other differences between any image of straight teeth and any image with misaligned teeth were significant and the smallest mean difference between the two groups of images was 1.87 (P = .039). However, in the images with aligned teeth, there was also a statistically significant difference with higher scores to the images with symmetrical nose in contrast with those with significant laterorhinia (mean difference = 1.03 cm). CONCLUSION: Teeth disharmonies had a more negative impact on the aesthetic perception of the face than did nose deviations, for both dentists and laypersons.

Evaluation of the impact of orthodontists' smile with malocclusions on social media and professional credibility.

OBJECTIVES: This study assessed laypeople's perceptions of orthodontist credibility based on malocclusions and whether these views affect their choice to seek treatment. Eye-tracking technology and questionnaires were utilized. MATERIALS AND METHODS: Ninety-five lay raters, through eye tracking and a questionnaire, assessed 12 images of orthodontists with malocclusions. Malocclusions were categorized by the Index Of Treatment Need (IOTN) as grade 1 (near ideal), 3 (anterior crowding), and 5 (with diastemas). Fixation points were recorded, and credibility was gauged via questionnaires. A Mentimeter word cloud was generated. RESULTS: IOTN 1 orthodontists were viewed as more credible than IOTN 3 (p < 0.001) and 5 (p < 0.001). Raters were more willing to receive treatment from IOTN 1 orthodontists. The focus for IOTN 1 was between eyes and mouth, while IOTN 3 and 5 were on the mouth. "Crooked teeth" and "spacing" were predominant in word clouds for IOTN 3 and 5. CONCLUSION: Orthodontists with an IOTN grade 1 rating were perceived as more competent, reliable, and professional, thus making it more likely for laypeople to choose them as their preferred providers. CLINICAL RELEVANCE: The smiles of professionals play a significant role in laypeople's decision to choose them as their orthodontist, and strategic utilization of social media can effectively deliver health information to a larger audience in a faster and more direct manner.

Study on the Association between anterior tooth Colour Preference based on the FAHP and individual factors.

BACKGROUND: The relationship between tooth colour and individual satisfaction in oral aesthetics has long been a topic of interest. In this study, we utilized the fuzzy analytic hierarchy process (FAHP) to investigate the impacts of sex and age on tooth colour preference. The findings of this study should provide a scientific basis for oral aesthetic practice. METHODS: In the current study, a random selection method was employed, and a survey was completed by 120 patients. To obtain tooth colour data, standard tooth colour charts were used. Smile photos were taken as template images using a single-lens reflex camera. The FAHP was utilized to conduct a weight analysis of tooth colour preferences among patients of different sexes and age groups. RESULTS: There were significant differences in tooth colour preference based on sex and age. Men tend to prefer the B1 colour, while women may prioritize the aesthetic effects of other colours. Additionally, as patients age, their preferences for tooth colour become more diverse. These findings offer valuable insights for oral aesthetics practitioners, enabling them to better address the aesthetic needs of patients across different sexes and ages. This knowledge can aid in the development of more personalized treatment plans that align with patients' expectations. CONCLUSION: In this study, we utilized scientific analysis methods to quantify the popularity of different tooth colours among various groups of people. By doing so, we established a scientific foundation for clinical practice. The findings of this study offer valuable insights for oral aesthetic research, enhancing our understanding of tooth colour. Additionally, these findings have practical applications in the field of oral medicine, potentially improving patients' quality of life and overall oral health.

Does supercharging with cross-face nerve graft enhance smile in non-flaccid facial paralysis patients undergoing selective neurectomy?

BACKGROUND: Cross face nerve grafting (CFNG) is a well-established nerve transfer technique in facial reanimation; however, no study has assessed outcome of supercharging the smile with CFNG in patients with synkinesis. The goal of this study was to examine the smile outcome in non-flaccid facial paralysis (NFFP) patients after supercharging with CFNG during selective neurectomy. METHODS: NFFP patients who underwent CFNG with end-to-side coaptation to a smile branch on the paralyzed side during selective neurectomy were retrospectively identified and their charts were reviewed. Pre-operative and post-operative facial function was assessed with the electronic clinician-graded facial function tool (eFACE), and an automated computer-aided facial assessment tool (Emotrics). Smile metrics were compared pre-operatively, in early post-operative time (EPO, <6 months), and late post-operative time (LPO, >9 months) when CFNG contribution would be expected. RESULTS: Thirteen cases were performed between June 2019 and December 2021. No objective smile metrics improved following supercharging with CFNG. Oral commissure excursion improved by 1.23 points in eFACE (p = .812), and by 0.84 in Emotrtics (p = .187) from EPO to LPO. EFACE dynamic score was improved by 0.08 points from EPO to LPO (p = .969). CONCLUSIONS: Using CFNG for supercharging the smile during selective neurectomy in NFFP patients may not enhance smile. Longer term results following supercharging and long term natural history of selective neurectomy should be assessed.

Slow Well-Being Gardening: Creating a Sensor Network for Radiation Therapy Patients via Horticultural Therapeutic Activity.

Well-being can reflect people's psychological conditions and be used alongside physiological parameters to evaluate patients' physical and mental health. The modern medical environment increasingly incorporates digital carriers, human-computer interaction devices, sensible spaces, and the execution of suitable algorithms. Slow design in healthy human-computer interaction is often used to reflect people's dependence on or support from behaviors or objects, promoting the stability of behaviors as well as meaningful and positive changes. Therefore, in this study, we propose a slow sensing model, develop a Slow Well-Being Gardening system, and use it to evaluate behavioral data from radiation therapy patients during treatment sessions and horticultural therapy. This study is based on SENS and slow design, setting the hospital lounge as a sensible space and establishing a sensor system. After a 10-day inspection, the process was evaluated and verified. Ultimately, data from facial detection (smile) and HRV showed that the patients in the experimental group experienced a significant improvement in their well-being, feeling better than those in the control group who maintained the most common state in normal treatment. Therefore, it can be inferred that the Slow Well-Being Gardening model is indeed valid and can be further developed.

Nerve to the zygomaticus major muscle: An anatomical study and surgical application to smile reconstruction.

Smile reconstruction using the branches that supply the zygomaticus major muscle as a motor source is an established procedure in facial reanimation surgery for facial paralysis. However, the anatomy of the nerve to the muscle remains unclear. Therefore, we herein examined the topographical anatomy of the nerve to the zygomaticus major muscle to obtain more detailed information on donor nerve anatomy. Preserved cadaver dissection was performed under a microscope on 13 hemifaces of 8 specimens. The branches that innervate the zygomaticus major muscle and their peripheral routes medial to the muscle were traced and examined. A median of four (ranges 2-4) branches innervated the zygomaticus major muscle. The proximal two branches (near the muscle origin) arose from the zygomatic branch, the second of which was the major branch. The distal branches (near the oral commissure) arose from the buccal branch or zygomaticobuccal plexus. The vertical distance from the caudal margin of the zygomatic arch to the major branch intersecting point was 19 ± 4.0 mm, while the horizontal distance parallel to the Frankfort plane was 29 ± 5.2 mm. The proximal two branches innervating the zygomaticus major muscle were detected in the majority of specimens. The anatomical findings obtained herein on the nerve to the zygomaticus major muscle will allow for more reliable donor selection in facial reanimation surgery.

Smile dynamics: A comparative study of Fijians and NZ Europeans.

BACKGROUND: The Fijian 'Bula Smile' is often described as the world's friendliest; however, its description remains anecdotal. OBJECTIVE: This study aimed to describe and compare the dynamics of Fijians' smiles with those of New Zealand Europeans. METHODS: An observational study was conducted on two ethnic groups, Fijians (FJ; N = 23) and New Zealand Europeans (NZ; N = 23), age- and gender-matched. All participants were asked to watch amusing videos, and their reactions were video recorded. The videos were analysed by software to assess the frequency, duration, intensity and genuineness of smiling episodes. Based on the Facial Action Coding System, Action Unit 6 (AU6-cheek raiser), Action Unit 12 (AU12-lip corner puller) and Action Unit 25 (AU25-lips apart) were assessed. Data were analysed by generalised linear models after adjusting for personality traits. RESULTS: Fijians smiled longer than New Zealand Europeans (+19.9%; p = .027). Mean intensity of AU6 (+1.0; 95%CIs = 0.6-1.5; p < .001), AU12 (+0.5; 95%CIs = 0.1-0.9; p = .008) and AU25 (+22.3%; 95%CIs = 7.3%-37.3%; p = .005) were significantly higher in FJ group than the NZ group. CONCLUSION: Smiling features of Fijians and New Zealanders showed objective differences, the most distinctive being a higher activation of the Duchenne's marker (AU6) in the Fijian group, which is regarded as a sign of smile genuineness.

Defining Standard Values for FaceReader Facial Expression Software Output.

BACKGROUND: FaceReader is a validated software package that uses computer vision technology for facial expression recognition which has become increasingly popular in academic research to expedite, scale, and decrease the cost of facial emotion analysis. In this study, we compare FaceReader analysis to human evaluator interpretation in order to define standard values for the software output. METHODS: Randomly generated facial images produced by generative adversarial networks were analyzed using FaceReader and by survey participants (n=496). The age, facial emotion, and intensity of emotion as determined by the software and survey participants were recorded. Results were analyzed and compared. RESULTS: 80 randomly generated images (20 children, 20 young adult, 20 middle aged, and 20 elderly; 38 male and 42 female) were included. Analysis of correlation between most common expression identified by FaceReader and the primary emotion detected by surveyors showed strong correlation (κ = 0.77, 95% CI = 0.64-0.91). On analyzing this correlation by age group, there was fair correlation in children (κ = 0.40, 95% CI = 0.078-0.72), perfect correlation in young adults (κ = 1.0, 95% CI = 1.0-1.0), strong correlation in middle aged adults (κ = 0.79, 95% CI = 0.53-1) and near perfect in elderly adults(κ = 0.9 , 95% CI = 0.7-1.0). CONCLUSIONS: We provided the first study defining the expected average values generated by FaceReader in generally smiling images. This can be used as a standard in future studies. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors   www.springer.com/00266 .

The influence of different tooth proportions obtained using digital smile design on the perception of smile esthetics.

OBJECTIVE: The aim of this study is to examine the effect of designs using different esthetic dental proportions made with a digital smile design program on the esthetic perception of individuals of different ages, genders and educational statuses. MATERIALS AND METHODS: Different smile designs were made on facial photos taken of a female and male model using a smile design program. Four different dental proportions (golden proportion [GPR], golden percentage [GPE]), Preston proportion [P] and recurring esthetic dental proportion [RED]) and two different tooth shapes (oval and square) were used. Images with 16 different smile designs were presented to 4th and 5th-year students of a faculty of dentistry, dentists, specialist dentists and laypersons for scoring. RESULTS: The gender of the participants did not affect the scores given (p > 0.05), and participants over the age of 30 and lay people had higher scores (p < 0.05). The GPR design was scored lower than RED when all designs were subdivided by tooth shape and gender (p < 0.001). CONCLUSIONS: The esthetic perceptions of people of different ages and dentistry education levels may differ from each other. Using the GPR when designing a digital smile may not be suitable for both genders. CLINICAL SIGNIFICANCE: If esthetic dental proportions are to be utilized when designing a smile, it may be more appropriate to use the P and RED proportions instead of the GPR. In addition, if the patients whose smiles will be designed are young and have received dental education, it should be considered that their esthetic expectations may be high. Trial registration ClinicalTrials.gov Identifier: NCT0567043.

The impact of dental midline angulation towards the facial flow curve on the esthetics of an asymmetric face: Perspective of laypeople and orthodontists.

PURPOSE: The objective of the present article was to evaluate the impact of dental midline angulation in asymmetrical faces. MATERIALS AND METHODS: A full-portrait image was used to create a set of digitally modified images with a different degree of facial asymmetry, towards the right and the left side of the face respectively. Half of the images were designed with an equivalent angulation of the dental midline in respect to the curve of the lower third of the face and half of them without. Through a web survey, 250 laypeople and 250 orthodontists were asked to assess the attractiveness of each image separately. RESULTS: As the asymmetry of the face was increased, facial attractiveness was further decreased both for laypersons and orthodontists. For each one of the modified images, when the dental midline was following the curve that was formed from the inclination of the simulated asymmetry of the face, the smile attractiveness scores were significantly higher compared to a straight dental midline. CONCLUSION: Facial asymmetries derived from the inclination of the nose, the chin and the commissural line of the lips can significantly affect the smile attractiveness. An orientation of the dental midline towards the facial asymmetry in order to follow the facial curve, can be beneficial for the smile attractiveness compared to a perpendicular to the face dental midline. During the design of a smile, clinicians have to take into consideration deviations in facial midline, in order their restorations to be in harmony with the rest of the face. CLINICAL SIGNIFICANCE: During the design of a smile, clinicians have to take into consideration deviations in the facial midline, in order their restorations to be in harmony with the rest of the face.

Digitalization: New era of dentistry.

The visual appeal of teeth and smiles significantly influences both how others perceive individuals and their self-image and confidence. The subjective nature of dental esthetics, varying greatly among patients and dental professionals, has made digital smile design tools essential for creating natural and personalized esthetics. Contemporary digital methods and workflows encompass all clinical phases, from diagnosis to the creation of a smile aligned with the patient's facial features, and the completion of the restoratives. Digital technologies not only streamline treatment planning, smile designing, and the creation of restorations but also enable effective and time-efficient collaboration among different dental specialists and dental laboratory technicians, enhancing overall patient care. The use of contemporary digital tools in interdisciplinary esthetic treatments is presented, underscoring the role of high magnification for precision, implant placement, minimal invasiveness, and clinical effectiveness.

Influence of orthodontic bracket prescription on smile attractiveness in patients with different sagittal skeletal patterns: A 3-dimensional cross-sectional study.

INTRODUCTION: The objective of this study was to evaluate the influence of orthodontic bracket prescription on smile attractiveness. METHODS: Three women were chosen according to their sagittal skeletal pattern: skeletal Class I, II, or III malocclusion. For each, 3 smiling pictures were taken in frontal, oblique, and lateral views. The maxillary arch was then scanned, and a 3-dimensional digital model was constructed on the OrthoAnalyzer software. The information of 3 orthodontic prescriptions, namely Roth, MBT, and Ricketts, was simulated after the virtual placement of orthodontic brackets on 10 maxillary teeth. The simulations were then superimposed on the smile photographs in the 3 views, creating a total of 27 images. Groups of orthodontists, dentists, and laypeople rated the attractiveness of each smile using the visual analog scale. RESULTS: This study included 167 evaluators: 54 orthodontists, 54 dentists, and 59 laypersons. In terms of orthodontic prescription, MBT esthetic scores were 4% lower than Roth scores (P <0.001), and Ricketts scores were 13.6% lower than Roth scores (P <0.001). In terms of skeletal pattern, Class II and III scores were 15.0% and 16.4% lower than Class I scores, respectively (P <0.001). Regarding the smiling view, oblique view scores were 3.1% lower than frontal view scores (P = 0.031), whereas lateral view scores were 8.4% lower than frontal view scores (P <0.001). In contrast to gender and age, the specialty of the evaluators significantly affected the esthetic rating of the smiles. CONCLUSIONS: The attractiveness of a smile is affected by the prescription of the brackets. The Roth prescription tends to obtain the most favorable esthetic scores, especially in sagittal smiling images. Profile smiles with excessively proclined incisors are considered unattractive. Different views of the same smile do not get similar esthetic scores because sagittal views are rated the most severely.

Smile attractiveness in patients treated with or without 4 premolar extractions: A 36-year follow-up.

INTRODUCTION: This study aimed to assess the smile attractiveness in patients treated with or without 4 premolar extractions at a 36-year follow-up. METHODS: The sample comprised 52 patients with Class I and II malocclusion divided into 2 groups. Group 1 consisted of 15 patients treated without extractions (10 females and 5 males), with a mean pretreatment, posttreatment, and long-term posttreatment (T3) age of 13.2, 15.1, and 49.8 years, respectively. The mean treatment time was 1.9 years, and the mean long-term follow-up period was 34.7 years. Group 2 consisted of 37 patients (25 females and 12 males) treated with 4 premolar extractions, with a mean pretreatment, posttreatment, and long-term posttreatment age of 13.3, 15.7, and 53.6 years, respectively. The mean treatment time was 2.3 years, and the mean long-term follow-up period was 37.9 years. The mean retention time was 2 years for both groups. Frontal smiling photographs were obtained at long-term follow-up. Smile attractiveness was evaluated in an online questionnaire in which the evaluator could rate the smiling photographs with a 10-point scale. The randomly selected evaluator sample consisted of 62 laypeople, 33 dentists, and 89 orthodontists. Independent t tests, 1-way analysis of variance, and Tukey tests were used for intergroup comparisons at P <0.05. RESULTS: The smile attractiveness on the long term was similar in the groups treated with 4 premolar extractions (4.70 ± 1.35) or without extractions (4.51 ± 1.46). Women and orthodontists were more critical in assessing smile attractiveness than men, dentists, and laypeople. CONCLUSIONS: After long-term posttreatment, the smile attractiveness was similar in patients treated with 4 premolar extractions or without extractions.

Influence of education level and gender of dental students on perception of dental aesthetics.

BACKGROUND: Fulfilling aesthetic norms is an imperative of modern society. Accordingly, aesthetics has found its important role in dental medicine. The aim was to study whether there is a difference in the perception of tooth shade change and anatomical variations of anterior maxillary teeth among dental students depending on the level of education, gender, and experience in assisting in a dental office. METHODS: The research was conducted among dental students via the Google Forms platform. Students evaluated the aesthetic acceptability of a smile on the unaltered, reference photograph (RP) and on the other 28 photographs in which the tooth shade (lighter and darker teeth), length (shortened central incisors, elongated, and beveled lateral incisors, elongated canines) and position (atypical and typical rotations and diastemas) of the upper maxillary teeth were altered by digital manipulation. The 1-10 assessment scale was used. Statistical analysis comprised one-way Kolmogorov-Smirnov test, X2 tests, t-test, and 3-way MANOVA. RESULTS: In the research 208 students participated, 113 were preclinical students, 104 assisted in dental office and 175 were females. There were no significant effects of gender regarding length and position modifications (p > .05), while women were stricter in evaluation of lighter shade (p < .05). Clinical students were stricter in evaluating all manipulated photographs (MP) except those towards darker shade modifications, while assisting in a dental office or having a dentist in close family showed no significant effects (p > .05). CONCLUSIONS: With a higher level of targeted academic education, dental students sharpen their ability to notice deviations from the aesthetic norms of a smile.

Smile aesthetics in Pakistani population: dentist preferences and perceptions of anterior teeth proportion and harmony.

BACKGROUND: This study aimed to evaluate dentist perceptions of attractive smiles in the Pakistani population, considering different dental proportions. METHODS: Maxillary casts and digital images were used to create symmetrical representations of anterior teeth. dentists' preferences for good and bad teeth proportions, width/height ratios, and various dental proportions (golden, recurring esthetic dental (RED), golden percentage, Preston, and local/observed) were assessed using one sample and paired t-test. The Chi-square test was used to determine the gender disparities and factors affecting smile attractiveness. A p-value of ≤ 0.05 was taken as significant. RESULTS: The RED proportion emerged as the preferred choice for normal-sized teeth, with specialists and general dentists favoring it over the golden proportion. For tall teeth, the golden proportion was predominantly preferred. The golden percentage received limited preference for aesthetic smile construction. CONCLUSIONS: The smiles created using the principles of RED proportion were opted as the most attractive by local dentists. Factors such as tooth arrangement, color, and midline were highlighted as essential considerations in aesthetic smile construction.

A comparative study of the use of digital technology in the anterior smile experience.

OBJECTIVES: this study aims to compare the clinical outcomes of traditional and digital crown extension guides in the aesthetic restoration of anterior teeth. Additionally, the study will analyze the differences in the results of various digital crown extension guides in anterior aesthetic restorations. METHODS: Sixty-two patients who required aesthetic restoration of their anterior teeth were selected for this study. The patients had a total of 230 anterior teeth and were randomly divided into three groups: a control group of 22 cases who received diagnostic wax-up with pressure film, an experimental group 1 of 20 cases who received 3D printed digital models with pressure film, and an experimental group 2 of 20 patients who received digital dual-positioning guides. The control group had a total of 84 anterior teeth, experimental group 1 had 72 anterior teeth, and experimental group 2 had 74 anterior teeth. The study compared three methods for fabricating crown extension guides: the control group used the diagnostic wax-up plus compression film method, while experimental group 1 used compression film on 3D printed models and experimental group 2 used 3D printed digital dual-positioning crown extension guides. After the crown lengthening surgery, the control group patients wore DMG resin temporary crown material for gingival contouring, while the experimental group patients wore 3D printed resin temporary crowns for the same purpose. The patients were followed up in the outpatient clinic after wearing temporary crowns for 1 month, 3 months, and 6 months, respectively. The clinical results were evaluated in terms of marginal fit, red aesthetic index, and white aesthetic index. RESULTS: Based on the statistical analysis, the experimental group required significantly fewer follow-up visits and less time for guide design and fabrication compared to the control group. Additionally, the surgical time for the experimental group was significantly shorter than that of the control group. During the postoperative period between the 1st and 3rd month, the PES index scores for the marginal gingival level, proximal, and distal mesiodistal gingival papillae of the experimental group showed a trend of superiority over those of the control group. By the 6th month, the marginal gingival level exhibited a significant difference between the experimental and control groups. The experimental group demonstrated superior results to the control group in terms of shape, contour, and volume of the teeth, color, surface texture, and transparency of the restorations, and features during the 1st and 3rd postoperative months. In the 6th month, the comparative results indicated that the experimental group continued to exhibit superior outcomes to the control group in terms of the shape, color, surface texture, and transparency of the restorations, as well as the characteristics of the teeth. Additionally, the experimental group demonstrated significantly fewer gingival alterations than the control group at 1 month, 3 months, and 6 months post-procedure, with this difference being statistically significant. Furthermore, the combination of 3D printing technology and restorative techniques was utilized, resulting in consistent patient satisfaction. CONCLUSION: Digitalisation plays an important role in anterior aesthetic restorations. The use of digital technology to manage the entire process of anterior cosmetic restorations can improve restorative results, reduce the number of follow-up appointments, shorten consultation time, and achieve better patient satisfaction.

Determining the widths of the maxillary anterior teeth for esthetics: comparison of the Mondelli and Albers formulas, esthetic proportion, and golden ratio.

The purpose of this study was to compare various formulas for idealized proportions of the maxillary incisors to the actual dimensions of natural teeth. The Mondelli formula 1 (MF1), Mondelli formula 2 (MF2), Albers formula (AF), esthetic proportion (EP) for width and height of anterior teeth, and golden ratio (GR) were calculated for a total of 50 dental students (30 women and 20 men) who participated in the study. The following measurements were obtained directly in the participant's mouth with a digital caliper: the mesiodistal and incisogingival dimensions of the maxillary central incisors, lateral incisors, and canines; the intercanine distance; and the smile width. The participants were photographed, and the smile width was also measured on the photographs. The MF1 and MF2 were each calculated twice, using both direct measurements and photographic measurements. The projected central incisor widths calculated using the MF1, MF2, and AF were compared among themselves and against the actual measurements using analysis of variance and Fisher test for multiple comparisons (α = 0.05). The EP and GR were analyzed using descriptive statistics. There was a statistically significant difference between all of the widths projected by the formulas and the actual widths of the central incisors (P < 0.05). Whether calculated from a direct or a photographic measurement, the incisor widths projected by the MF1 and MF2 were statistically similar to each other (P > 0.05). The EP values were similar to those reported in the literature. Only 2% of the participants had an incisor width ratio (central incisor/lateral incisor) that matched the GR of 1.618, while 86% fell within the range of 1.2 to 1.4. Overall, the proportions calculated with the MF1, MF2, AF, EP, and GR did not exactly match the actual dimensions of natural teeth. The formulas and the proportions available in the literature can assist in esthetic planning, but the individual characteristics of each patient and expertise of the dentist should guide treatment for each case.

Chocolate unicorns and smiling teddy biscuits: analysis of the use of child-directed marketing on the packages of Australian foods.

OBJECTIVE: The use of food packaging as a vehicle for marketing to children is under investigated. Our objective was to determine the prevalence and types of child-directed promotional techniques used on food packaging in Australia. DESIGN: Based on existing literature and regulations, we developed a framework to classify on-pack child-directed promotional techniques involving the use of characters and other elements that appeal to children. We analysed the packaging of all products in eight food categories available for sale from supermarkets in 2019 and recorded the use of child-directed promotions on pack. We assessed the number and proportion of products displaying child-directed promotional techniques overall and assessed the healthiness of products using child-directed promotions against four indicators of healthiness to provide summary data overall and for the manufacturers who most frequently employed child-targeted strategies. SETTING: Data were collected from the FoodSwitch database in Sydney, Australia. RESULTS: 901/8006 (11·3 %) products displayed one or more child-directed on-pack element. Most frequent was on foods for infants and young children (n 315), confectionery (n 283), snack foods (n 172) and dairy (n 168). Personified characters were the most commonly used element (n 512). Products using child-directed promotional techniques scored poorly on all four indicators of healthiness: mean health star rating 2·34 (out of 5); 81 % ultra-processed and 6·1 % and 4·5 % products eligible to market to children under Western Pacific and Mexican nutrient profiling schemes, respectively. CONCLUSIONS: Australian children are targeted by promotional techniques on the packaging of unhealthy food products. Stronger regulation of these techniques is warranted to protect children's health.