Amplification-free detection of SARS-CoV-2 with CRISPR-Cas13a and mobile phone microscopy.

The December 2019 outbreak of a novel respiratory virus, SARS-CoV-2, has become an ongoing global pandemic due in part to the challenge of identifying symptomatic, asymptomatic, and pre-symptomatic carriers of the virus. CRISPR diagnostics can augment gold-standard PCR-based testing if they can be made rapid, portable, and accurate. Here, we report the development of an amplification-free CRISPR-Cas13a assay for direct detection of SARS-CoV-2 from nasal swab RNA that can be read with a mobile phone microscope. The assay achieved ∼100 copies/µL sensitivity in under 30 min of measurement time and accurately detected pre-extracted RNA from a set of positive clinical samples in under 5 min. We combined crRNAs targeting SARS-CoV-2 RNA to improve sensitivity and specificity and directly quantified viral load using enzyme kinetics. Integrated with a reader device based on a mobile phone, this assay has the potential to enable rapid, low-cost, point-of-care screening for SARS-CoV-2.

Ultrasonography or Radiography for Suspected Pediatric Distal Forearm Fractures.

BACKGROUND: Data on whether ultrasonography for the initial diagnostic imaging of forearm fractures in children and adolescents is noninferior to radiography for subsequent physical function of the arm are limited. METHODS: In this open-label, multicenter, noninferiority, randomized trial in Australia, we recruited participants 5 to 15 years of age who presented to the emergency department with an isolated distal forearm injury, without a clinically visible deformity, in whom further evaluation with imaging was indicated. Participants were randomly assigned to initially undergo point-of-care ultrasonography or radiography, and were then followed for 8 weeks. The primary outcome was physical function of the affected arm at 4 weeks as assessed with the use of the validated Pediatric Upper Extremity Short Patient-Reported Outcomes Measurement Information System (PROMIS) score (range, 8 to 40, with higher scores indicating better function); the noninferiority margin was 5 points. RESULTS: A total of 270 participants were enrolled, with outcomes for 262 participants (97%) available at 4 weeks (with a window of ±3 days) as prespecified. PROMIS scores at 4 weeks in the ultrasonography group were noninferior to those in the radiography group (mean, 36.4 and 36.3 points, respectively; mean difference, 0.1 point; 95% confidence interval [CI], -1.3 to 1.4). Intention-to-treat analyses (in 266 participants with primary outcome data recorded at any time) produced similar results (mean difference, 0.1 point; 95% CI, -1.3 to 1.4). No clinically important fractures were missed, and there were no between-group differences in the occurrence of adverse events. CONCLUSIONS: In children and adolescents with a distal forearm injury, the use of ultrasonography as the initial diagnostic imaging method was noninferior to radiography with regard to the outcome of physical function of the arm at 4 weeks. (Funded by the Emergency Medicine Foundation and others; BUCKLED Australian New Zealand Clinical Trials Registry number, ACTRN12620000637943).

Long-Term Cost-Effectiveness of Case Finding and Mass Screening for Celiac Disease in Children.

BACKGROUND & AIMS: Celiac disease (CD) is a common yet underdiagnosed autoimmune disease with substantial long-term consequences. High-accuracy point-of-care tests for CD antibodies conducted at youth primary health care centers may enable earlier identification of CD, but evidence about the cost-effectiveness of such strategies is lacking. We estimated the long-term cost-effectiveness of active case finding and mass screening compared with clinical detection in the Netherlands. METHODS: A decision tree and Markov model were used to simulate a cohort of 3-year-old children with CD according to each strategy, taking into account their impact on long-term costs (from a societal perspective) and quality-adjusted life-years (QALYs). Model parameters incorporated data from the GLUTENSCREEN project, the Dutch Celiac Society, the Dutch Pediatric Surveillance Unit, and published sources. The primary outcome was the incremental cost-effectiveness ratio (ICER) between strategies. RESULTS: Mass screening produced 7.46 more QALYs and was €28,635 more costly compared with current care (ICER: €3841 per QALY), and case finding produced 4.33 more QALYs and was €15,585 more costly compared with current care (ICER: €3603 per QALY). At a willingness to pay of €20,000 per QALY, both strategies were highly cost-effective compared with current care. Scenario analyses indicated that mass screening is likely the optimal strategy, unless no benefit in detecting asymptomatic cases is assumed. CONCLUSIONS: An earlier identification of CD through screening or case finding in children using a point-of-care tests leads to improved health outcomes and is cost-effective in the long-term compared with current care. If the feasibility and acceptability of the proposed strategies are successful, implementation in Dutch regular care is needed.

Accelerated Development of a COVID-19 Lateral Flow Test in an Academic Setting: Lessons Learned.

The COVID-19 pandemic further demonstrated the need for usable, reliable, and cost-effective point-of-care diagnostics that can be broadly deployed, ideally for self-testing at home. Antigen tests using more-detectable reporter labels (usually at the cost of reader complexity) achieve better diagnostic sensitivity, supporting the value of higher-analytical-sensitivity reporter technologies in lateral flow.We developed a new approach to simple, inexpensive lateral flow assays (LFAs) of great sensitivity, based on the glow stick peroxyoxalate chemistry widely used in emergency settings and in children's toys. At the peak of the COVID-19 pandemic, we had the opportunity to participate in the pandemic-driven NIH Rapid Acceleration of Diagnostics (RADx) initiative aiming to develop a deployable lateral flow diagnostic for SARS-CoV-2 nucleoprotein based on our novel glow stick-inspired light-emitting reporter technology. During this project, we screened more than 250 antibody pairs for analytical sensitivity and specificity directly in LFA format, using recombinant nucleoprotein and then gamma-irradiated virions spiked into negative nasal swab extracts. Membranes and other LFA materials and swabs and extraction reagent components also were screened and selected. Optimization of conjugate preparation and spraying as well as pretreatment/conditioning of the sample pad led to the final optimized LFA strip. Technology development also included optimization of excitation liquid enclosed in disposable droppers, design of a custom cartridge and smartphone-based reader, and app development, even a prototype reader usable with any mobile phone. Excellent preclinical performance was first demonstrated with contrived samples and then with leftover clinical samples. Moving beyond traditional academic focus areas, we were able to establish a quality management system (QMS), produce large numbers of customized LFA cassettes by contract injection molding, build in-house facilities to assemble and store thousands of complete tests for verification and validation and usability studies, and source kitting/packaging services and quality standard reagents and build partnerships for clinical translation, regulatory guidance, scale up, and market deployment. We were not able to bring this early stage technology to the point of commercialization within the limited time and resources available, but we did achieve strong proof-of-concept and advance translational aspects of the platform including initial high-performance LFAs, reading by the iPhone app using only a $2 plastic dark box with no lens, and convenient, usable excitation liquid packaging in droppers manufacturable in very large numbers.In this Account, we aim to provide a concise overview of our 18-month sprint toward the practical development of a deployable antigen lateral flow assay under pandemic conditions and the challenges and successes experienced by our team. We highlight what it takes to coach a technically savvy but commercially inexperienced academic team through the accelerated translation of an early stage technology into a useful product. Finally, we provide a guided tutorial and workflow to empower others interested in the rapid development of translatable LFAs.

Characterization of a thermostable Cas13 enzyme for one-pot detection of SARS-CoV-2.

Type VI CRISPR-Cas systems have been repurposed for various applications such as gene knockdown, viral interference, and diagnostics. However, the identification and characterization of thermophilic orthologs will expand and unlock the potential of diverse biotechnological applications. Herein, we identified and characterized a thermostable ortholog of the Cas13a family from the thermophilic organism Thermoclostridium caenicola (TccCas13a). We show that TccCas13a has a close phylogenetic relation to the HheCas13a ortholog from the thermophilic bacterium Herbinix hemicellulosilytica and shares several properties such as thermostability and inability to process its own pre-CRISPR RNA. We demonstrate that TccCas13a possesses robust cis and trans activities at a broad temperature range of 37 to 70 °C, compared with HheCas13a, which has a more limited range and lower activity. We harnessed TccCas13a thermostability to develop a sensitive, robust, rapid, and one-pot assay, named OPTIMA-dx, for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection. OPTIMA-dx exhibits no cross-reactivity with other viruses and a limit of detection of 10 copies/µL when using a synthetic SARS-CoV-2 genome. We used OPTIMA-dx for SARS-CoV-2 detection in clinical samples, and our assay showed 95% sensitivity and 100% specificity compared with qRT-PCR. Furthermore, we demonstrated that OPTIMA-dx is suitable for multiplexed detection and is compatible with the quick extraction protocol. OPTIMA-dx exhibits critical features that enable its use at point of care (POC). Therefore, we developed a mobile phone application to facilitate OPTIMA-dx data collection and sharing of patient sample results. This work demonstrates the power of CRISPR-Cas13 thermostable enzymes in enabling key applications in one-pot POC diagnostics and potentially in transcriptome engineering, editing, and therapies.

Point-of-care high-sensitivity cardiac troponin in suspected acute myocardial infarction assessed at baseline and 2†h.

BACKGROUND AND AIMS: Strategies to assess patients with suspected acute myocardial infarction (AMI) using a point-of-care (POC) high-sensitivity cardiac troponin I (hs-cTnI) assay may expedite emergency care. A 2-h POC hs-cTnI strategy for emergency patients with suspected AMI was derived and validated. METHODS: In two international, multi-centre, prospective, observational studies of adult emergency patients (1486 derivation cohort and 1796 validation cohort) with suspected AMI, hs-cTnI (Siemens Atellica® VTLi) was measured at admission and 2 h later. Adjudicated final diagnoses utilized the hs-cTn assay in clinical use. A risk stratification algorithm was derived and validated. The primary diagnostic outcome was index AMI (Types 1 and 2). The primary safety outcome was 30-day major adverse cardiac events incorporating AMI and cardiac death. RESULTS: Overall, 81 (5.5%) and 88 (4.9%) patients in the derivation and validation cohorts, respectively, had AMI. The 2-h algorithm defined 66.1% as low risk with a sensitivity of 98.8% [95% confidence interval (CI) 89.3%-99.9%] and a negative predictive value of 99.9 (95% CI 99.2%-100%) for index AMI in the derivation cohort. In the validation cohort, 53.3% were low risk with a sensitivity of 98.9% (95% CI 92.4%-99.8%) and a negative predictive value of 99.9% (95% CI 99.3%-100%) for index AMI. The high-risk metrics identified 5.4% of patients with a specificity of 98.5% (95% CI 96.6%-99.4%) and a positive predictive value of 74.5% (95% CI 62.7%-83.6%) for index AMI. CONCLUSIONS: A 2-h algorithm using a POC hs-cTnI concentration enables safe and efficient risk assessment of patients with suspected AMI. The short turnaround time of POC testing may support significant efficiencies in the management of the large proportion of emergency patients with suspected AMI.

Plasmonic Optical Wells-Based Enhanced Rate PCR.

Rapid, sensitive, inexpensive point-of-care molecular diagnostics are crucial for the efficient control of spreading viral diseases and biosecurity of global health. However, the gold standard, polymerase chain reaction (PCR) is time-consuming and expensive and needs specialized testing laboratories. Here, we report a low-cost yet fast, selective, and sensitive Plasmonic Optical Wells-Based Enhanced Rate PCR: POWER-PCR. We optimized the efficient optofluidic design of 3D plasmonic optical wells via the computational simulation of light-to-heat conversion and thermophoretic convection in a self-created plasmonic cavity. The POWER-PCR chamber with a self-passivation layer can concentrate incident light to accumulate molecules, generate rapid heat transfer and thermophoretic flow, and minimize the quenching effect on the naked Au surface. Notably, we achieved swift photothermal cycling of nucleic acid amplification in POWER-PCR on-a-chip in 4 min 24 s. The POWER-PCR will provide an excellent solution for affordable and sensitive molecular diagnostics for precision medicine and preventive global healthcare.

Mass Production of Carbon Nanotube Transistor Biosensors for Point-of-Care Tests.

Low-dimensional semiconductor-based field-effect transistor (FET) biosensors are promising for label-free detection of biotargets while facing challenges in mass fabrication of devices and reliable reading of small signals. Here, we construct a reliable technology for mass production of semiconducting carbon nanotube (CNT) film and FET biosensors. High-uniformity randomly oriented CNT films were prepared through an improved immersion coating technique, and then, CNT FETs were fabricated with coefficient of performance variations within 6% on 4-in. wafers (within 9% interwafer) based on an industrial standard-level process. The CNT FET-based ion sensors demonstrated threshold voltage standard deviations within 5.1 mV at each ion concentration, enabling direct reading of the concentration information based on the drain current. By integrating bioprobes, we achieved detection of biosignals as low as 100 aM through a plug-and-play portable detection system. The reliable technology will contribute to commercial applications of CNT FET biosensors, especially in point-of-care tests.

Review: Current Laboratory and Point-of-Care Pharyngitis Diagnostic Testing and Knowledge Gaps.

Pharyngitis is an inflammatory condition of the pharynx and/or tonsils commonly seen in both children and adults. Viruses and bacteria represent the most common encountered etiologic agents-yeast/fungi and parasites are infrequently implicated. Some of these are predominantly observed in unique populations (eg, immunocompromised or unvaccinated individuals). This manuscript (part 2 of 3) summarizes the current state of laboratory and point-of-care diagnostic testing and highlights the expanding role of nucleic acid amplification in the expedited diagnosis and management of patients with acute pharyngitis. It discusses preanalytical, analytical, and postanalytical variables that impact the performance of culture, rapid antigen, and nucleic acid amplification testing. Finally, it sets the stage for part 3, which discusses the emerging role of biomarkers in the management of individuals with acute pharyngitis.

Point-of-Care Testing for Hepatitis C in the Priority Settings of Mental Health, Prisons, and Drug and Alcohol Facilities-the PROMPt Study.

BACKGROUND: A barrier to hepatitis C virus (HCV) cure is conventional testing. The aim of this study was to evaluate the effect of HCV antibody and RNA point-of-care testing (POCT) on testing rates, linkage to care, treatment, and acceptability of testing in 3 priority settings in Australia. METHODS: Participants were enrolled in an interventional cohort study at a reception prison, inpatient mental health service, and inpatient alcohol and other drug unit, between October 2020 and December 2021. HCV POCT was performed using SD Bioline HCV antibody fingerstick test and a reflexive Xpert HCV Viral Load Fingerstick test using capillary blood samples. A retrospective audit of HCV testing and treatment data was performed at each site for the preceding 12-month period to generate a historical control. RESULTS: A total of 1549 participants received a HCV antibody test with 17% (264 of 1549) receiving a positive result, of whom 21% (55 of 264) tested HCV RNA positive. Across all settings the rate of testing per year significantly increased between the historical controls and the study intervention period by 2.57 fold (rate ratio, 2.57 [95% confidence interval, 2.32-2.85]) for HCV antibody testing and 1.62 (rate ratio, 1.62 [95% confidence interval, 1.31-2.01]) for RNA testing. Treatment uptake was higher during the POCT intervention (86% [47 of 55]; P = .01) compared to the historical controls (61% [27 of 44]). CONCLUSIONS: This study demonstrated across 3 settings that the use of HCV antibody and RNA POCT increased testing rates, treatment uptake, and linkage to care. The testing model was highly acceptable for most participants. CLINICAL TRIALS REGISTRATION: ACTRN-12621001578897.

Multicomponent Strategy with Decentralized Molecular Testing for Tuberculosis.

BACKGROUND: Effective strategies are needed to facilitate the prompt diagnosis and treatment of tuberculosis in countries with a high burden of the disease. METHODS: We conducted a cluster-randomized trial in which Ugandan community health centers were assigned to a multicomponent diagnostic strategy (on-site molecular testing for tuberculosis, guided restructuring of clinic workflows, and monthly feedback of quality metrics) or routine care (on-site sputum-smear microscopy and referral-based molecular testing). The primary outcome was the number of adults treated for confirmed tuberculosis within 14 days after presenting to the health center for evaluation during the 16-month intervention period. Secondary outcomes included completion of tuberculosis testing, same-day diagnosis, and same-day treatment. Outcomes were also assessed on the basis of proportions. RESULTS: A total of 20 health centers underwent randomization, with 10 assigned to each group. Of 10,644 eligible adults (median age, 40 years) whose data were evaluated, 60.1% were women and 43.8% had human immunodeficiency virus infection. The intervention strategy led to a greater number of patients being treated for confirmed tuberculosis within 14 days after presentation (342 patients across 10 intervention health centers vs. 220 across 10 control health centers; adjusted rate ratio, 1.56; 95% confidence interval [CI], 1.21 to 2.01). More patients at intervention centers than at control centers completed tuberculosis testing (adjusted rate ratio, 1.85; 95% CI, 1.21 to 2.82), received a same-day diagnosis (adjusted rate ratio, 1.89; 95% CI, 1.39 to 2.56), and received same-day treatment for confirmed tuberculosis (adjusted rate ratio, 2.38; 95% CI, 1.57 to 3.61). Among 706 patients with confirmed tuberculosis, a higher proportion in the intervention group than in the control group were treated on the same day (adjusted rate ratio, 2.29; 95% CI, 1.23 to 4.25) or within 14 days after presentation (adjusted rate ratio, 1.22; 95% CI, 1.06 to 1.40). CONCLUSIONS: A multicomponent diagnostic strategy that included on-site molecular testing plus implementation supports to address barriers to delivery of high-quality tuberculosis evaluation services led to greater numbers of patients being tested, receiving a diagnosis, and being treated for confirmed tuberculosis. (Funded by the National Heart, Lung, and Blood Institute; XPEL-TB ClinicalTrials.gov number, NCT03044158.).

A Fully Integrated Handheld Electrochemical Sensing Platform for Point-of-Care Testing of Escherichia coli O157:H7.

Fully integrated devices that enable full functioning execution without or with minimum external accessories or equipment are deemed to be one of the most desirable and ultimate objectives for modern device design and construction. Escherichia coli O157:H7 (E. coli O157:H7) is often linked to outbreaks caused by contaminated water and food. However, the sensors that are currently used for point-of-care E. coli O157:H7 (E. coli O157:H7) detection are often large and cumbersome. Herein, we demonstrate the first example of a handheld and pump-free fully integrated electrochemical sensing platform with the capability to point-of-care test E. coli O157:H7 in the actual samples of E. coli O157:H7-spiked tap water and E. coli O157:H7-spiked watermelon juice. This platform was made possible by overcoming major engineering challenges in the seamless integration of a microfluidic module for pump-free liquid sample collection and transportation, a sensing module for efficient E. coli O157:H7 testing, and an electronic module for automatically converting and wirelessly transmitting signals into a single and compact electrochemical sensing platform that retains its inimitable stand-alone, handheld, pump-free, and cost-effective feature. Although our primary emphasis in this study is on detecting E. coli O157:H7, this pump-free fully integrated handheld electrochemical sensing platform may also be used to monitor other pathogens in food and water by including specific antipathogen antibodies.

Photoactivatable CRISPR/Cas12a Sensors for Biomarkers Imaging and Point-of-Care Diagnostics.

In recent years, the CRISPR/Cas12a-based sensing strategy has shown significant potential for specific target detection due to its rapid and sensitive characteristics. However, the "always active" biosensors are often insufficient to manipulate nucleic acid sensing with high spatiotemporal control. It remains crucial to develop nucleic acid sensing devices that can be activated at the desired time and space by a remotely applied stimulus. Here, we integrated photoactivation with the CRISPR/Cas12a system for DNA and RNA detection, aiming to provide high spatiotemporal control for nucleic acid sensing. By rationally designing the target recognition sequence, this photoactivation CRISPR/Cas12a system could recognize HPV16 and survivin, respectively. We combined the lateral flow assay strip test with the CRISPR/Cas12a system to realize the visualization of nucleic acid cleavage signals, displaying potential instant test application capabilities. Additionally, we also successfully realized the temporary control of its fluorescent sensing activity for survivin by photoactivation in vivo, allowing rapid detection of target nucleic acids and avoiding the risk of contamination from premature leaks during storage. Our strategy suggests that the CRISPR/Cas12a platform can be triggered by photoactivation to sense various targets, expanding the technical toolbox for precise biological and medical analysis. This study represents a significant advancement in nucleic acid sensing and has potential applications in disease diagnosis and treatment.

Dried Blood Spots and Miniaturized Ultrasonic Nebulization Microplasma Optical Emission Spectrometry for Point-of-Care Testing of Blood Lithium.

Despite the significant importance of blood lithium (Li) detection in the treatment of bipolar disorder (BD), its point-of-care testing (POCT) remains a great challenge due to tedious sample preparation and the use of large-footprint atomic spectrometers. Herein, a system coupling dried blood spots (DBS) with a point discharge optical emission spectrometer equipped with a miniaturized ultrasonic nebulizer (MUN-µPD-OES) was developed for POCT of blood Li. Three microliters of whole blood were used to prepare a dried blood spot on a piece of filter paper to which 10 µL of eluent (1% (v/v) formic acid and 0.05% (v/v) Triton-X) was added. Subsequently, the paper was placed onto the vibrating steel membrane of the ultrasonic nebulizer and powered on to generate aerosol. The aerosol was directly introduced to the µPD-OES for quantification of Li by monitoring its atomic emission line at 670.8 nm. The proposed method minimized matrix interference caused by high levels of salts and protein. It is worth noting that the MUN suitably matches the needs of DBS sampling and can provide aerosolized introduction of Li into the assembled µPD-OES, thus eliminating all tedious sample preparation and the need for a commercial atomic spectrometer. Calibration response is linear in the therapeutic range and a limit of detection (LOD) of 1.3 µg L-1 is well below the Li minimum therapeutic concentration (2800 µg L-1). Li in mouse blood was successfully detected in real-time using MUN-µPD-OES after intraperitoneal injection of lithium carbonate, confirming that the system holds great potential for POCT of blood Li for patients with BD.

Realizing Ultrasensitive and Accurate Point-of-Care Profiling for ATP with a Triple-Mode Strategy Based on the ATP-Induced Reassembly of a Copper Coordination Polymer Nanoflower.

New strategies for accurate and reliable detection of adenosine triphosphate (ATP) with portable devices are significant for biochemical analysis, while most recently reported approaches cannot satisfy the detection accuracy and independent of large instruments simultaneously, which are unsuitable for fast, simple, and on-site ATP monitoring. Herein, a unique, convenient, and label-free point-of-care sensing strategy based on novel copper coordination polymer nanoflowers (CuCPNFs) was fabricated for multimode (UV-vis, photothermal, and RGB values) onsite ATP determination with high selectivity, sensitivity, and accuracy. The resulting CuCPNFs with a 3D hierarchical structure exhibit the ATP-triggered decomposition behavior because the competitive coordination between ATP and the copper ions of CuCPNFs can result in the formation of ATP-Cu, which reveals preeminent peroxidase mimics activity and can accelerate the oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) to form oxTMB. During this process, the detection system displayed not only color changes but also a strong NIR laser-driven photothermal effect. Thus, the photothermal and color signal variations are easily monitored by a portable thermometer and a smartphone. This multimode point-of-care platform can meet the requirements of onsite, without bulky equipment, accuracy, and reliability all at once, greatly enhancing its application in practice and paving a new way in ATP analysis.

Exonuclease III/Cas12a Cascade Amplification Strategy and Smartphone-Based Portable Fluorescence Detector to Repurpose the Commercial AFP Strip for the POCT of Multiple RNAs.

Point of care testing (POCT) of nucleic acid (NA) contributes to the timely disease diagnosis, like bacteria and virus screening in households or resource-constrained areas, but its development has always been stagnant. Herein, we proposed an exonuclease III cascaded with CRISPR/Cas12a (Exo-III/Cas12a) amplification strategy and constructed a smartphone-based portable fluorescence detector (SPFD) to repurpose the commercial alpha-fetoprotein (AFP) strip for the ultrasensitive and hand-held detection of NA samples. In detail, the target-initiated-Exo-III/Cas12a strategy realizes the signal amplification and liberates AFP from magnetic beads through the trans-cleavages of activated Cas12a toward the AFP aptamer. After magnetic separation and migration, the fluorescence signals of the test (FT) and control (FC) lines on the AFP strip were digitally output by the SPFD, and the FT/FC was employed for the quantitative analysis to minimize external disturbances and improve accuracy. We experimentally assessed the universe applicability of the proposed NA-POCT platform toward miRNA-155, 16S rRNA of Staphylococcus aureus, and ORF1a/b RNA of Covid-19 pseudovirus, achieving favorable detection limits of 42 aM, 18 CFU/mL, and 87 copies/µL, respectively. Moreover, its simplicity, universality, and admirable detection performance demonstrate a great potential in the aspect of rapidly transforming the existing POCT devices for multiple new applications at the time of need.

Filter Membrane-Based Colorimetric Approach for Point-of-Care Detection of Biomarkers Using CRISPR-Cas12a.

CRISPR-Cas-based point-of-care testing (POCT) strategies have been widely explored for the detection of diverse biomarkers. However, these methods often require complicated operations, such as careful solution transfer steps, to achieve high sensitivity and accuracy. In this study, we combine a filter membrane-based POCT method with CRISPR-Cas12a for colorimetric detection of biomarkers. For the nucleic acid target, the trans-cleavage activity of CRISPR-Cas12a is directly triggered, cutting the single-stranded DNA linkers on glucose oxidase (GOx)-modified polymer nanoparticles. Due to the size difference between GOx and the polymer nanoparticles, GOx can be separated using a filter membrane. The filtrate containing GOx reacts with the substrate to generate a colorimetric signal. For the non-nucleic acid target, the non-nucleic acid signal is converted into a nucleic acid signal that activates CRISPR-Cas12a, resulting in a colorimetric signal. The entire operation is easy to perform, and the signal can be directly observed via the naked eye, which circumvents the use of costly instruments. The developed strategy holds great promise for accurate and accessible POCT detection of disease biomarkers in resource-limited settings.

Nanoenzyme Hydrogel Film-Based Portable Point-of-Care Testing Platform for Double-Signal Visual Detection of PSA.

The development of the Point-of-Care Testing (POCT) platform that combines convenience and cost-effectiveness is crucial for enabling the visual detection of disease biomarkers. In this work, a POCT platform for the sensitive in situ detection of prostate specific antigen (PSA) with dual-signal output was constructed by functionalizing the Eppendorf (EP) tube. This was achieved through the modification of aptamer hairpin probes (AHPs) on the lid of the EP tube and the assembly of a nanoenzyme hydrogel film on its inner wall. The target could trigger the release of Ag+ by AHP and subsequently activate Ag+-dependent DNAzyme (Ag-DNAzyme). This would initiate the cleavage of the DNA-Au/Pt NP hydrogel network, leading to the release of Au/Pt NPs. The released Au/Pt NPs exhibit both peroxidase (POD)-like and catalase (CAT)-like activity to produce a colorimetric response and induce liquid flow under pressure. Therefore, the target can be measured visually and quantitatively through colorimetric analysis and the measurement of total dissolved solids (TDS) using a pressure-triggered liquid flow device integrated into the platform. The designed platform is distinguished by its simplicity, specificity, cost-effectiveness, and remarkable sensitivity. It allows for the visual detection of PSA within concentration ranges of 0.5-100 ng/L (colorimetric) and 3-100 ng/L (TDS reading), boasting detection limits as low as 0.15 ng/L (colorimetric) and 0.57 ng/L (TDS reading). The strategy of target-triggered nanoenzyme release significantly enhances sensitivity and provides a guiding approach for visual biomarker detection.

Electrochemical Biosensor for Point-of-Care Testing of Low-Abundance Biomarkers of Neurological Diseases.

The neurofilament protein light chain (NEFL) is a potential biomarker of neurodegenerative diseases, and interleukin-6 (IL-6) is also closely related to neuroinflammation. Especially, NEFL and IL-6 are the two most low-abundance known protein markers of neurological diseases, making their detection very important for the early diagnosis and prognosis prediction of such kinds of diseases. Nevertheless, quantitative detection of low concentrations of NEFL and IL-6 in serum remains quite difficult, especially in the point-of-care test (POCT). Herein, we developed a portable, sensitive electrochemical biosensor combined with smartphones that can be applied to multiple scenarios for the quantitative detection of NEFL and IL-6, meeting the need of the POCT. We used a double-antibody sandwich configuration combined with polyenzyme-catalyzed signal amplification to improve the sensitivity of the biosensor for the detection of NEFL and IL-6 in sera. We could detect NEFL as low as 5.22 pg/mL and IL-6 as low as 3.69 pg/mL of 6 µL of serum within 2 h, demonstrating that this electrochemical biosensor worked well with serum systems. Results also showed its superior detection capabilities over those of high-sensitivity ELISA for serum samples. Importantly, by detecting NEFL and IL-6 in sera, the biosensor showed its potential for the POCT model detection of all known biomarkers of neurological diseases, making it possible for the mass screening of patients with neurodegenerative diseases.

Ultrasensitive Rapid Antigen Test by Geometric Lateral Flow Assays and Highly Doped Upconversion Nanoparticles.

The paper-based lateral flow assay (LFA) testing strips are currently the most widely used for point-of-care testing (POCT), valued for their rapid result turnaround times in a few minutes. However, their sensitivity has been limited. Upconversion nanoparticles (UCNPs), especially highly doped ones, have emerged as promising luminescent reporters to enhance the LFA sensitivity. These UCNPs exhibit a nonlinear enhancement in luminescence with excitation power density, necessitating higher power densities for higher brightness. In this study, we utilized a geometric paper strip design to minimize the immune reaction area and maximize the excitation power density, enabling ultrasensitive detection of the SARS-CoV-2 nucleoprotein antigen. This design also slowed the antigen flow on the paper strip, extending the reaction time between antigen and antibody, thereby enhancing the efficiency of the immune reaction. Through this design, our approach achieved over a 100-fold enhancement in the limit of detection (LOD) compared with the widely used LFAs, based on gold colloidal nanoparticles and europium nanoparticles. This innovation expands the scope of LFA applications that require a low LOD.