Image fusion-based low-dose CBCT enhancement method for visualizing miniscrew insertion in the infrazygomatic crest.

Digital dental technology covers oral cone-beam computed tomography (CBCT) image processing and low-dose CBCT dental applications. A low-dose CBCT image enhancement method based on image fusion is proposed to address the need for subzygomatic small screw insertion. Specifically, firstly, a sharpening correction module is proposed, where the CBCT image is sharpened to compensate for the loss of details in the underexposed/over-exposed region. Secondly, a visibility restoration module based on type II fuzzy sets is designed, and a contrast enhancement module using curve transformation is designed. In addition to this, we propose a perceptual fusion module that fuses visibility and contrast of oral CBCT images. As a result, the problems of overexposure/underexposure, low visibility, and low contrast that occur in oral CBCT images can be effectively addressed with consistent interpretability. The proposed algorithm was analyzed in comparison experiments with a variety of algorithms, as well as ablation experiments. After analysis, compared with advanced enhancement algorithms, this algorithm achieved excellent results in low-dose CBCT enhancement and effective observation of subzygomatic small screw implantation. Compared with the best performing method, the evaluation metric is 0.07-2 higher on both datasets. The project can be found at: https://github.com/sunpeipei2024/low-dose-CBCT .

Consideration of the diameter of superficial temporal arteries related to filler injections in the temporal region.

BACKGROUND: The concavity of the temple due to adipose tissue atrophy from aging accentuates the zygomatic arch and lateral orbital rim, leading to an aged appearance. The use of hyaluronic acid filler in the temporal region has gained popularity due to its procedural simplicity and consistent outcomes. OBJECTIVE: To evaluate the safety of administering hyaluronic acid filler in the temporal region concerning the frontal branch of the superficial temporal artery, which is at risk of injury. METHODS: Empirical observations were conducted on the internal diameter of the frontal branch of the superficial temporal artery, a critical anatomical site for potential injury. RESULTS: A significant proportion of the artery segments exhibited an internal diameter below 1 mm. Given that the outer diameter of an 18-gauge cannula is 1.27 mm, this method can be considered a relatively secure approach for enhancing the temporal region. CONCLUSION: The use of an 18-gauge cannula for hyaluronic acid filler administration in the temporal region appears to be a safe and effective method, with the potential risk to the frontal branch of the superficial temporal artery being minimal.

Rotation of a Part of the Composite Flap for Simultaneous Gonion Reduction and Malar Augmentation During Rhytidectomy in Asians.

BACKGROUND: The desired facial shape that Asians aim to achieve through plastic surgery differs from that of westerners. OBJECTIVES: The author facilitates facial volume deflation by using the rotation of a part of the composite flap to the malar area resulting in volumetric augmentation during rhytidectomy; simultaneously, a volumetric reduction was implemented in the gonion. METHODS: Extended deep plane rhytidectomy with the rotation of a part of the composite flap was performed in 49 patients, whereas extended deep plane rhytidectomy without the rotation of a part of the composite flap was performed in 20 patients. For the results, the satisfaction survey of the surgery was conducted in all patients and by 2 surgeons during a follow-up visit 12 months later. To assess the surgical outcome objectively, the author used the Allergan photometric midface volume deficit scale to measure the midface volume. The midface contour and degree of projection were analyzed using lateral view photographs of the patients. The measurement of segment CM (distance between the lateral canthus and mouth corner) and segment MA (distance from segment CM to the most protruding malar area) was performed. RESULTS: The patients who underwent extended deep plane rhytidectomy with the rotation of a part of the composite flap reported higher overall satisfaction and achieved more favorable results, as evaluated by the 2 aesthetic surgeons (P < 0.05). The scores on the Allergan photometric midface volume deficit scale showed a significant increase before and after the surgery in both groups (P < 0.05), also as evaluated by the 2 aesthetic surgeons. However, the change in scores was found to be higher in the extended deep plane rhytidectomy with the rotation of a part of the composite flap group. The midface contour and degree of projection showed an increase of 20.6% on the right face and 22.7% on the left face, respectively (P < 0.001). CONCLUSION: Using the rotation of a part of the composite flap during rhytidectomy resulted in overall satisfactory outcomes for all patients. Based on these findings, it can be concluded that the use of this surgical method is beneficial and effective.

Orthodontic maxillary molar movement-induced zygomatic pillar remodeling and its consequences on occlusal characteristics and stress distribution.

OBJECTIVE: We aimed to evaluate changes in the zygomatic pillar during orthodontic treatment involving premolar extraction, analyze the effects of maxillary first molar movement on zygomatic pillar remodeling, and examine occlusal characteristics and stress distribution after remodeling. METHODS: Twenty-five patients who underwent premolar extraction were included in the study. The zygomatic pillar measurement range was defined, and cross-sectional areas, surface landmark coordinates, alveolar and cortical bone thicknesses, and density changes were assessed using Mimics software based on the cone-beam computed tomography scans taken before (T0) and after the treatment (T1). Multiple linear regression analysis was performed to determine the correlation between changes in the zygomatic pillar and maxillary first molar three-dimensional (3D) movement and rotation. Additionally, the correlation between pillar remodeling and occlusal characteristics was analyzed by Teetester. Pre- and post-reconstruction 3D finite element models were constructed and loaded with an average occlusal force of two periods. RESULTS: The morphological and structural remodeling of the zygomatic pillar after orthodontic treatment involving premolar extraction showed a decreased cross-sectional area of the lower segment of the zygomatic pillar. The zygomatic process point moved inward and backward, whereas the zygomatico-maxillary suture point moved backward. The thicknesses of the zygomatic pillar alveolar and cortical bones were thinner, and reduced alveolar bone density was observed. Simultaneously, the movement and angle change of the maxillary first molar could predict zygomatic pillar reconstruction to a certain extent. With decreasing the total occlusal force and the occlusal force of the first molar, occlusal force distribution was more uniform. With zygomatic pillar remodeling, occlusal stress distribution in the zygomatic alveolar ridge decreased, and occlusal stress was concentrated at the junction of the vertical and horizontal parts of the zygomatic bone and the posterior part of the zygomatic arch. CONCLUSIONS: Orthodontic treatment involving premolar extraction led to zygomatic pillar remodeling, making it more fragile than before and reducing the occlusal force of the maxillary first molar and the entire dentition with stress concentrated in weak areas. CLINICAL RELEVANCE: No other study has focused on the effects of orthodontics on pillar structures. The present study indicates that the mesial movement of the maxillary first molar weakened the zygomatic pillar and reduced occlusal function, thereby providing insights for inserting anchorage screws and facial esthetics.

Transmalar Kirshner Wire Fixation Under Ultrasound Scanning is Useful for Unstable Zygomatic Arch Fracture Combined With Zygomatic Body Fracture.

Plate fixation to zygomatic arch fractures carries the risk of facial nerve palsy and scarring of the cheek; however, without plate fixation, bone deviation or displacement may reoccur after surgery. Furthermore, zygomatic arch fractures combined with zygomatic body fractures are more postoperatively unstable than single zygomatic arch fractures. Few reports have focused on this combined fracture type, and no consensus has been reached regarding treatment. Because plate fixation for slight deviation of the zygomatic body has little advantage for stabilization, the authors, usually opt for transmalar pinning alone instead of plate fixation at the hospital. This study is a retrospective case series of 7 patients, among 100 zygomatic fractures excluding isolated zygomatic arch fractures, treated using transmalar pinning under ultrasound scanning. The reduction was performed through the oral and temporal incision as a surgical procedure. Under ultrasound observation, a Kirshner wire was inserted into the zygomatic body from the unaffected side while maintaining the reduced position. The wire was removed at an outpatient visit 2 to 3 months following surgery. In all cases, the zygomatic body was of the laterally rotated type, and postoperative morphologic evaluation showed improvement without postoperative complications. Scores were higher in middle-aged and older than in young people. Correction of zygomatic rotation also scored higher than zygomatic arch morphology. Transmalar Kirshner wire fixation under ultrasound observation is a simple and minimally invasive method for zygomatic arch fractures, which avoids the possible complications related to plate fixation.

Three-dimensional Measurement of the Zygomatic-maxillary Complex in the Class III Malocclusion Patients with Maxillary Retrusion.

This study investigated the anatomic features of the zygomatic-maxillary complex in patients with maxillary retrusion without clefts. Individuals were grouped, and craniofacial measurements were performed for 21 individuals with skeletal Class III malocclusion with maxillary retrusion (CIII) and 48 individuals from the control group (CG). We evaluated the predetermined hard-tissue and soft-tissue points of the facial profile in each group. Independent sample t -tests were performed to determine the differences between groups (significance set at P <0.05). Multiple points on the midface, including the most posterior point on the contour of the maxillary alveolar process, lowest point of the zygomaticomaxillary suture, furthest point to the zygomatic self-base plane, superior point in the infraorbital foramen, and lowest point of the inferior margin of the orbit to the coronal plane were smaller in CIII than in CG (all P <0.05). The soft tissue thickness in these regions was significantly increased compared with that in the normal group. In summary, for class III malocclusion patients with maxillary retrusion, the deficiency in the midface gradually decreased going upward, with the deficiency at the maxillary alveolar level being the most serious. To some extent, soft tissues compensate for the deficiencies in the facial skeleton, and standard Le Fort I osteotomy advancement was sufficient to achieve a harmonious appearance.

Evaluation of Bone Thickness and Density Values in Resistance Regions in Rapid Maxillary Expansion Using Computed Tomography.

OBJECTIVES: This study used computed tomography (CT) to compare the bone thickness and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures that are resistant to rapid maxillary expansion (RME) treatment according to age, sex, and cervical vertebrae maturation (CVM) stage. METHODS: The study included 200 paranasal sinus records obtained for medical diagnosis and examination in a radiology clinic. The records provided data on 110 males and 90 females aged between 4 and 28 years. Bone thickness and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures were measured using CT imaging. The correlations of bone thickness and density values with the variables of age, sex, and CVM stage were evaluated. RESULTS: No statistically significant difference was revealed between the bone thickness values around the zygomaticomaxillary and zygomaticotemporal sutures and age, sex, CVM stage, and the right and left regions of the same individual ( P >0.05). A strong correlation was identified between Hounsfield units (Hu) values on bone density in all 3 regions and age and sex ( P <0.001). No correlation was found between the CVM stage and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures ( P >0.05). CONCLUSIONS: The Hu values of the records from females were higher than those of males in all age groups. It was observed that with increasing age, bone density values increased in all 3 regions, and thus circummaxillary region's Hu value increased.

The Spatial Relationship Between Coronoid Process and Zygomatic Complex After Reduction Malarplasty.

BACKGROUND: Reduction malarplasty presents challenges in terms of postoperative complications, particularly limited mouth opening. Excessive inward displacement of the zygomatic complex can impinge on the coronoid process resulting in restricted mouth opening. This study aimed to assess the spatial relationship between the coronoid process and the zygomatic complex after reduction malarplasty. METHODS: A retrospective study was conducted, including consecutive patients underwent reduction malarplasty. Radiological measurements were performed before surgery and during the final follow-up, including the coronoid-condylar index, distance between the coronoid process and zygomatic complex, and thickness and density of the temporal and masseter muscles. Clinical and radiographic data were recorded and analyzed. RESULTS: A total of 159 female patients were included with an average age of 28.1 years and a mean follow-up of 6.7 months. The mean coronoid-condylar index was 1:1.4, ranging from 1:0.6 to 1:2.6. Following surgery, the distances between the coronoid process and the anterior zygoma decreased by approximately 1 mm. Additionally, the postoperative distance between the highest point of the coronoid process and the zygomatic arch decreased by around 4 mm horizontally and changed approximately 1 mm vertically. No significant changes were observed in the thickness and density of the temporal and masseter muscles after surgery. CONCLUSIONS: Reduction malarplasty led to a slight decrease in the distance between the coronoid process and the zygoma. The operation generally resulted in proximity between the highest point of the coronoid process and the zygomatic arch. However, we believe that common reduction malarplasty rarely leads to osseous impingement. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Investigating the Contraction Pattern of the Zygomaticus Major Muscle and its Clinical Relevance: A Functional MRI Study.

BACKGROUND: Our understanding of facial anatomy has significantly evolved, yet the detailed contraction patterns of facial muscles and their presentation during clinical imaging remain largely unexplored. Understanding the contraction patterns and visual presentation of these muscles, particularly the zygomaticus major could enhance pre-surgical facial assessments and the development of new treatment strategies. METHODS: A total of 34 healthy young individuals (17 female, 17 male) with a mean age of 23.6 (2.4) years [range: 20-30] were investigated regarding the length, thickness, width, and angle of the zygomaticus major muscle in five different facial expressions (i.e., repose, anger, joy, surprise, and sadness) utilizing MR imaging. RESULTS: Joyful expressions caused a reduction in muscle length to 85.6% of its original length and an increase in width (103.4%), thickness (108.4%), and facial angle (2.72°) when compared to that in repose, suggesting isotonic contraction. Conversely, expressions of anger, surprise, and sadness generally led to muscle stretching, seen through changes in length (98.9%, 104.3%, and 102.7%, respectively), width (98.8%, 96.5%, and 99.4%, respectively), and thickness (91.2%, 91.0%, and 102.7%, respectively), with variable alterations in facial angle (0.55°, 1.85°, and 1.00°, respectively) depending on the specific expression. CONCLUSION: This MRI-based study indicates that the zygomaticus major muscle experiences isotonic contraction, characterized by decreased length and increased width and thickness. The findings underline the importance of muscle thickness as a reliable parameter in assessing facial muscle function and offer valuable guidance for practitioners in accurately evaluating muscle performance during different facial expressions. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Learning curve of dynamic navigation-assisted zygomatic implant surgery: An in vitro study.

STATEMENT OF PROBLEM: Dynamic computer-assisted zygomatic implant surgery (dCAZIS) has been reported to provide clinical efficacy with high accuracy and low risk of complications. However, the learning curve before performing dCAZIS effectively is unknown. PURPOSE: The purpose of this in vitro study was to explore the learning curve of dCAZIS in dentists with different levels of experience in implant dentistry and navigation surgery. MATERIAL AND METHODS: Six senior dental students were randomly divided into 3 groups for initial training (FH-CI group: pretraining on freehand conventional implant surgery; FH-ZI group: pretraining on freehand ZI surgery; DN-CI group: pretraining on conventional implant surgery under dynamic navigation). Then, every operator conducted 6 repeated dCAZIS training sessions on edentulous 3-dimensional (3D) printed skull models and was asked to complete a self-report questionnaire after each training session. A total of 36 postoperative cone beam computed tomography (CBCT) scans with 144 ZI osteotomy site preparations were obtained and superimposed over the preoperative design for accuracy measurements. The operation time, 3D deviations, and results of the self-reports were recorded. Comparisons among groups were analyzed with independent-sample Kruskal-Wallis tests (α=.05), and correlations between study outcomes and the number of practices were calculated. RESULTS: Operator experience and increased practice times did not significantly affect the accuracy of dCAZIS (P>.05). However, the operation time varied among groups (P<.001), and significantly shortened with more practice, reaching 11.51 ±1.68 minutes at the fifth attempt in the FH-CI group (P<.001 compared with the first practice), 14.48 ±3.07 minutes at the third attempt in the FH-ZI group (P=.038), and 8.68 ±0.58 minutes at the sixth attempt in the DN-CI group (P<.001). All groups reached their own learning curve plateau stage within 6 practice sessions. As the number of practice sessions increased, the results from the self-report questionnaires gradually improved. CONCLUSIONS: Among dentists with different levels of experience in implant dentistry and navigation surgery, dCAZIS was found to have a learning curve with respect to operation time but not implant accuracy. Experience in ZI surgery had little impact on the learning curve of dCAZIS, but experience in navigation surgery was a key factor.

Assessing the frequency and variability of accessory zygomatic sutures in dry skulls: clinical insights and potential implications.

PURPOSE: This study aimed to determine the presence and incidence of accessory sutures and bipartite zygomatic bone types, and their effects on population affinity and clinical significance. METHODS: We examined 120 dry skulls and 50 zygomatic bones to evaluate the presence, frequency, and location of accessory zygomatic sutures as well as subtypes of bipartite zygomatic bones. Morphometric analysis included measuring the total width and length of the zygomatic bone with accessory sutures (ASs), the total length of the AS, and the shortest distance between the AS and various anatomical landmarks. RESULTS: Bipartite zygomatic bone was observed in 14 of 120 dry skulls (11.6%) and 1 of 50 zygomatic bones (2%), indicating an overall incidence of 16 occurrences (8.82%). The ASs were predominantly located posterolaterally in 11 cases (six males, five females), anteromedially in two cases (one male, one female), superiorly in one case (male), and superolaterally in one case (male). Significant differences were noted in the distribution of the ASs (p < 0.001). Notably, a vertical inferior bipartite zygomatic type, which has not been reported in the literature, was identified. Correlations were observed between the various anatomical landmarks. Among females, the length of AS was significantly different (p = 0.038). Significant differences were also noted in the shortest distance between the AS and the zygomaticofacial foramen (ZFF) based on the body side (p = 0.034). CONCLUSIONS: Our study suggests that the bipartite zygomatic bone is not a common occurrence, indicating its significance as a morphological variation present in certain individuals. The type VII bipartite zygomatic bone exhibited the highest incidence rate, suggesting potential ethnic-specific differences in the prevalence of certain subtypes. The consistent pattern of suture distribution, along with the asymmetry and variability in suture patterns, emphasizes its potential clinical relevance.

Comparison of stress distribution around all-on-four implants of different angulations and zygoma implants: a 7-model finite element analysis.

BACKGROUND: In recent years, zygomatic implants and the all-on-four treatment concept have been increasingly preferred for rehabilitation of atrophic maxillae. However, debate continues regarding the optimal configuration and angulation of the implants. The aim of this study was to analyze the biomechanical stress in implants and peri-implant bone in an edentulous maxilla with zygomatic implants and the all-on-four concept, using multiple implant configurations. METHODS: A total of 7 models consisting different combinations of 4-tilted dental implants and zygomatic implants were included in the study. In each model, a total of 200 N perpendicular to the posterior teeth and 50 N with 45° to the lateral tooth were applied. A finite element analysis was performed for determination of stress distribution on implants and peri-implant bone for each model. RESULTS: Higher stress values were observed in both cortical and trabecular bone around the 45°-tilted posterior implants in all-on-four models when compared to zygomatic implants. In cortical bone, the highest stress was established in an all-on-four model including 45°-tilted posterior implant with 4,346 megapascal (MPa), while the lowest stress was determined in the model including anterior dental implant combined with zygomatic implants with 0.817 MPa. In trabecular bone, the highest stress was determined in an all-on-four model including 30°-tilted posterior implant with 0.872 MPa while the lowest stress was observed in quad-zygoma model with 0.119 MPa. Regarding von Mises values, the highest stress among anterior implants was observed in an all-on-four model including 17° buccally tilted anterior implant with 38.141 MPa, while the lowest was in the including anterior dental implant combined with zygomatic implants with 20,446 MPa. Among posterior implants, the highest von Mises value was observed in the all-on-four model including 30°-tilted posterior implant with 97.002 MPa and the lowest stress was in quad zygoma model with 35.802 MPa. CONCLUSIONS: Within the limits of the present study, the use of zygoma implants may provide benefit in decreasing biomechanical stress around both dental and zygoma implants. Regarding the all-on-four concept, a 17° buccal angulation of anterior implants may not cause a significant stress increase while tilting the posterior implant from 30° to 45° may cause an increase in the stress around these implants.

Prevalence of Zygomatic Air Cell defects in a sample of 6-18-year-old patients in Saudi Arabia and Yemen: a retrospective study.

OBJECTIVES: This study aimed to comprehensively analyze the prevalence and influencing factors of Zygomatic Air Cell Defects (ZACD) among pediatric and adolescent populations in Saudi Arabia and Yemen. MATERIALS AND METHODS: A cross-sectional retrospective study was conducted, utilizing digital panoramic radiographs of dental outpatients aged 6 to 18 years. The data were collected from registered digital databases of dental clinics in Al-Qassim, Saudi Arabia, and an oral and maxillofacial radiology center in Sana'a, Yemen, covering the period from July 2018 to September 2022. The radiographs were evaluated based on inclusion and exclusion criteria, and ZACD was assessed using standardized descriptions. Statistical analysis, including logistic regression, was employed to examine the impact of the associated factors. RESULTS: The study encompassed a total of 3,169 participants, revealing an overall ZACD prevalence of 28.5%. Age emerged as a significant predictor (p ≤ 0.0001), with the likelihood of ZACD increasing as the age of the individual advances. Gender and geographic region did not exhibit statistically significant differences in ZACD prevalence. CONCLUSION: This study provides crucial insights into the prevalence of Zygomatic Air Cell Defects among pediatric and adolescent populations in Saudi Arabia and Yemen. It underscores the prevalence of ZACD and the notable influence of age on its occurrence. Additionally, the research challenges prior notions of gender and regional variations in ZACD prevalence, emphasizing the complexity of the factors involved. Early detection is essential to avoid unwanted complications during any surgical intervention in this area.

Effects of exposure length, cortical and trabecular bone contact areas on primary stability of infrazygomatic crest mini-screws at different insertion angles.

BACKGROUND: The infrazygomatic crest mini-screw has been widely used, but the biomechanical performance of mini-screws at different insertion angles is still uncertain. The aim of this study was to analyse the primary stability of infrazygomatic crest mini-screws at different angles and to explore the effects of the exposure length (EL), screw-cortical bone contact area (SCA), and screw-trabecular bone contact area (STA) on this primary stability. METHODS: Ninety synthetic bones were assigned to nine groups to insert mini-screws at the cross-combined angles in the occlusogingival and mesiodistal directions. SCA, STA, EL, and lateral pull-out strength (LPS) were measured, and their relationships were analysed. Twelve mini-screws were then inserted at the optimal and poor angulations into the maxillae from six fresh cadaver heads, and the same biomechanical metrics were measured for validation. RESULTS: In the synthetic-bone test, the LPS, SCA, STA, and EL had significant correlations with the angle in the occlusogingival direction (rLPS = 0.886, rSCA = -0.946, rSTA = 0.911, and rEL= -0.731; all P < 0.001). In the cadaver-validation test, significant differences were noted in the LPS (P = 0.011), SCA (P = 0.020), STA (P = 0.004), and EL (P = 0.001) between the poor and optimal angulations in the occlusogingival direction. The STA had positive correlations with LPS (rs = 0.245 [synthetic-bone test] and r = 0.720 [cadaver-validation test]; both P < 0.05). CONCLUSIONS: The primary stability of the infrazygomatic crest mini-screw was correlated with occlusogingival angulations. The STA significantly affected the primary stability of the infrazygomatic crest mini-screw, but the SCA and EL did not.

Round and flat zygomatic implants: effectiveness after a 3­year follow­up non­interventional study.

PURPOSE: This non-interventional study investigates variations in the type and frequency of late complications linked to novel zygomatic implant designs, installed adhering to the Zygoma Anatomy-Guided Approach (ZAGA) concept, over an extended follow-up period of at least 3 years. METHODS: Consecutive patients presenting indications for treatment with ZIs were treated according to ZAGA recommendations. Implants were immediately loaded. The ORIS success criteria for prosthetic offset, stability, sinus changes and soft-tissue status were used to evaluate the outcome. RESULTS: Twenty patients were treated. Ten patients received two ZIs and regular implants; one received three ZIs plus regular implants, and nine received four ZIs. Fifty-nine ZIs were placed: thirty-six (61%) Straumann ZAGA-Flat implants and twenty-three (39%) Straumann ZAGA-Round implants. Four patients (20%) presented earlier sinus floor discontinuities. Fifteen patients (75%) had prior sinus opacities. Nineteen patients were followed for between 38 and 53 months (mean 46.5 months). One patient dropped out after 20 months. When comparing pre-surgical CBCT with post-surgical CBCT, 84.7% of the sites presented identical or less sinus opacity; nine locations (15%) showed decreased, and another nine increased (15%) post-surgical sinus opacity. Fifty-three ZIs (89.8%) maintained stable soft tissue. Six ZIs had recessions with no signs of infection. ZIs and prosthesis survival rate was 100%. CONCLUSIONS: The study highlights the effectiveness of ZAGA-based zygomatic implant rehabilitations using Round and Flat designs. Despite patient number constraints, minimal changes in the frequency of late complications from the 1-year follow-up were observed. 100% implant and prosthesis survival rate over a mean follow-up of 46.5 months is reported.

Apical Abscess on a Zygomaticus Implant Initially Diagnosed as a Cutaneous Carcinoma.

We present a case of an infection on a zygomaticus implant presenting on the skin, mimicking a cutaneous carcinoma, and presenting to a head and neck tumor board. The clinical findings were an intermittently discharging lesion over the zygomatic bone, which resolved upon removing the offending zygomaticus implant. It is essential to be aware that infections on a zygomaticus implant can occur well away from the normal tooth-bearing areas, and having a dentist with knowledge of these implants on a tumor board can prevent misdiagnosis and treatment.

Prosthetic rehabilitation of patients with maxillary oncology defects using zygomatic implants.

PURPOSE: Prosthetics for patients after oncological resection of the upper jaw is a complex problem associated with the physiological and anatomical separation of the oral cavity and the nasal/paranasal region. This study reports the clinical results of the use of the zygomatic implants for prosthetic rehabilitation in patients with maxillectomy due to upper jaw tumors. MATERIALS AND METHODS: The study included 16 patients who underwent prosthetic rehabilitation using a zygomatic implant after maxillectomy period from 2021 to 2023. After the tumor was removed, immediate surgical obturators were placed. Main prosthetic rehabilitation was performed 6-12 months after tumor removal, but before that, a temporary obturator was made and used. Six-twelve months after tumor resection, 1-4 zygomatic implants were inserted into the zygomatic bone unilaterally or bilaterally. A total of 42 zygomatic implants were installed, 2 of which were unsuccessful and were removed in 1 patient. The implants were placed using the surgical guide, which was planned and prepared digitally. RESULTS: No postsurgical complications were seen, and the patients were discharged from the hospital after 7-10 days. The patients were able to return to a normal diet (hard food) after just 7 days following surgery, with no further complaints regarding function or pain, apart from the residual edema caused by the intervention. CONCLUSIONS: The use of prostheses fixed on zygomatic implants in patients with maxillary defects is an effective method of prosthodontic rehabilitation in complex clinical cases after maxillectomy.

The 'Manchester' method of minimal access fixation of the zygomatic arch in zygomatic complex fractures: a case series.

We have introduced a minimally invasive approach for the fixation of the zygomatic arch during the surgical management of zygomatic complex fractures. Access for this technique is provided by a preauricular approach and eyelid incisions with the addition of transcutaneous stab incisions overlying the arch. These stab incisions allow transcutaneous drilling and screw placement through a size CH 20 (5.0 mm) paediatric nasopharyngeal airway (NPA). We present a case series of seven patients. In all patients the arch component was successfully reduced and fixed, and no intraoperative or postoperative complications were observed. The use of an NPA is novel. It functions as a flexible self-irrigating sleeve and protects the skin from mechanical and thermal damage. The technique uses readily available equipment, is easy to learn, and simplifies surgery to the zygomatic arch.

In-house protocol for fully guided zygomatic implant surgery and prosthesis repositioning. A technical note

AIM: The present study aims to describe an in-house protocol for fully guided zygomatic implant surgery and prosthesis repositioning. MATERIALS AND METHODS: Four extramaxillary zygomatic dental implants (ZIs) were placed in one patient. The preoperative phase included digital planning, through which a surgical guide was designed and created. The analysis of the accuracy of guided surgery and the guided prosthesis repositioning was carried out by superimposing the digital planning with the final postsurgical implant positioning through CBCT. The radiologic evaluation included implant angular deviation, entrance and exit deviation, platform deviation, and apex apicocoronal and mesiodistal deviation. The prosthetic evaluation was performed in three directions: buccopalatal, apicocoronal, and mesiodistal. RESULTS: All the ZIs successfully osseointegrated after 3 months of healing, with no complications. The mean axial angular implant deviation was 0.52 ± 0.36 degrees, and the mean implant depth deviation was 0.47 ± 0.28 mm. The entrance and exit deviation of the implants was 0.74 ± 0.42 mm and 0.7 ± 0.43 mm, respectively. The virtual prosthesis was superimposed and compared with the standard tessellation language file of the provisional polymethyl methacrylate prosthesis at the level of the first molars and central incisors; the mean buccopalatal deviation was 0.6 ± 0.035 mm, the mean apicocoronal deviation was 0.65 ± 0.11 mm, and the mean mesiodistal deviation was 0.3 ± 0.07 mm. CONCLUSIONS: According to the results obtained in this first case of the present case series, careful and meticulous digital planning based on the correct prosthetic parameters can safely guide the performance of surgery.

Modeling stability post zygomatic fracture reconstruction.

Zygomaticomaxillary complex (ZMC) fracture repair is one of the most common surgical procedures performed in craniomaxillofacial trauma management. Miniplates and screws are used to stabilize the fractured bone using small local incisions, however, these procedures are not infrequently associated with hardware-related post-operative complications. The amount of fixation hardware utilized varies depending on the fracture pattern and surgical judgment, with three-point fixation being the conventionally accepted treatment. However, limited experimental testing and clinical studies have suggested that ZMC stabilization may be achieved with less than three-point fixation. In this study, we utilized a previously developed finite element modeling approach that allows for detailed bone and muscle representation to study the mechanical behavior of the fractured craniomaxillofacial skeleton (CMFS) under one, two, or three-point fixation of the ZMC. Results suggest that using a miniplate along the infraorbital rim in three-point fixation increases the amount of strain and load transfer to this region, rather than offloading the bone. Two-point (zygomaticomaxillary and zygomaticofrontal) fixation yielded strain patterns most similar to the intact CMFS. One-point (zygomaticofrontal) fixation resulted in higher tensile and compressive strains in the zygomaticofrontal region and the zygomatic arch, along with a higher tensile strain on the zygomatic body. These modeling results provide biomechanical evidence for the concept of over-engineering in the stabilization of facial fractures. Furthermore, they support previous suggestions that less than three-point fixation of ZMC fractures may be adequate to achieve uneventful healing.