Isothermal and kinetic screening of methyl red and methyl orange dyes adsorption from water by Delonix regia biochar-sulfur oxide (DRB-SO).

ABSTRACT

In this study, Delonix regia seed pods (DRSPs) as a locally available material were refluxed in 90% H2SO4 to yield a novel D. regia seed pods biochar-sulfur oxide (DRB-SO). FTIR, BET, BJH, SEM, EDX, XRD, DSC and TGA were applied to investigate the characterizations of the prepared DRB-SO. Various adsorption parameters like pH effect, dye concentration effect, adsorbent dose, reaction time isotherm and kinetic study were carried out to explain the process of adsorption of methyl orange (MO) and methyl red (MR) onto DRB-SO. Langmuir's adsorption model perfectly explained the adsorption process onto the surface of DRB-SO as a monolayer. The maximum adsorption efficiency of DRB-SO was (98%) and (99.6%) for MO and MR respectively which attained after 150 min with an adsorbent dose of 0.75 g/L. The pseudo-second-order kinetic model best explained the process of adsorption of MO and MR dyes by DRB-SO. The highest observed adsorption amount was as high as 144.9 mg/g for MO dye and 285.7 mg/g for MR dye, comparable with other reported materials based on activated carbon materials. All of the outcomes signposted a prodigious perspective of the fabricated biochar composite material in wastewater treatment. Using the regenerating DRB-SO through an acid-base regeneration process, six cycles of adsorption/desorption were examined. Over the course of the cycles, there was a minor decrease in the adsorption and desorption processes. Also, it was revealed what the most plausible mechanism was for DRB-SO to absorb the ions of the MO and MR dyes.