Your browser doesn't support javascript.
loading
Coercivity Increase of the Recycled HDDR Nd-Fe-B Powders Doped with DyF3 and Processed via Spark Plasma Sintering & the Effect of Thermal Treatments.
Ikram, Awais; Mehmood, M Farhan; Samardzija, Zoran; Sheridan, Richard Stuart; Awais, Muhammad; Walton, Allan; Sturm, Saso; Kobe, Spomenka; Zuzek Rozman, Kristina.
Afiliação
  • Ikram A; Department for Nanostructured Materials, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia. rana.awaisikram@yahoo.com.
  • Mehmood MF; Jozef Stefan International Postgraduate School, Jamova 39, SI-1000 Ljubljana, Slovenia. rana.awaisikram@yahoo.com.
  • Samardzija Z; Department for Nanostructured Materials, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia. farhan@ijs.si.
  • Sheridan RS; Jozef Stefan International Postgraduate School, Jamova 39, SI-1000 Ljubljana, Slovenia. farhan@ijs.si.
  • Awais M; Department for Nanostructured Materials, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia. zoran.samardzija@ijs.si.
  • Walton A; School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK. R.S.Sheridan.1@bham.ac.uk.
  • Sturm S; School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK. m.awais@bham.ac.uk.
  • Kobe S; School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham B15 2TT, UK. A.Walton@bham.ac.uk.
  • Zuzek Rozman K; Department for Nanostructured Materials, Jozef Stefan Institute, Jamova 39, SI-1000 Ljubljana, Slovenia. saso.sturm@ijs.si.
Materials (Basel) ; 12(9)2019 May 08.
Article em En | MEDLINE | ID: mdl-31071992
ABSTRACT
The magnetic properties of the recycled hydrogenation disproportionation desorption recombination (HDDR) Nd-Fe-B powder, doped with a low weight fraction of DyF3 nanoparticles, were investigated. Spark plasma sintering (SPS) was used to consolidate the recycled Nd-Fe-B powder blends containing 1, 2, and 5 wt.% of DyF3 grounded powder. Different post-SPS sintering thermal treatment conditions (600, 750, and 900 °C), for a varying amount of time, were studied in view of optimizing the magnetic properties and developing characteristic core-shell microstructure in the HDDR powder. As received, recycled HDDR powder has coercivity (HCi) of 830 kA/m, and as optimally as SPS magnets reach 1160 kA/m, after the thermal treatment. With only 1-2 wt.% blended DyF3, the HCi peaked to 1407 kA/m with the thermal treatment at 750 °C for 1 h. The obtained HCi values of the blend magnet is ~69.5% higher than the starting recycled HDDR powder and 17.5% higher than the SPS processed magnet annealed at 750 °C for 1 h. Prolonging the thermal treatment time to 6 h and temperature conditions above 900 °C was detrimental to the magnetic properties. About ~2 wt.% DyF3 dopant was suitable to develop a uniform core-shell microstructure in the HDDR Nd-Fe-B powder. The Nd-rich phase in the HDDR powder has a slightly different and fluorine rich composition i.e., Nd-O-F2 than in the one reported in sintered magnets (Nd-O-F). The composition of reaction zone-phases after the thermal treatment and Dy diffusion was DyF4, which is more abundant in 5 wt.% doped samples. Further doping above 2 wt.% DyF3 is ineffective in augmenting the coercivity of the recycled HDDR powder, due to the decomposition of the shell structure and formation of non-ferromagnetic rare earth-based complex intermetallic compounds. The DyF3 doping is a very effective single step route in a controlled coercivity improvement of the recycled HDDR Nd-Fe-B powder from the end of life magnetic products.
Palavras-chave

Texto completo: 1 Base de dados: MEDLINE Idioma: En Ano de publicação: 2019 Tipo de documento: Article

Texto completo: 1 Base de dados: MEDLINE Idioma: En Ano de publicação: 2019 Tipo de documento: Article