Imaging luminescent tattoo inks for direct visualization of linac and cobalt irradiation.
Med Phys
; 47(4): 1807-1812, 2020 Apr.
Article
em En
| MEDLINE
| ID: mdl-32056218
ABSTRACT
PURPOSE:
Tattoo fiducials are commonly used in radiotherapy patient alignment, and recent studies have examined the use of UV-excited luminescent tattoo ink as a cosmetic substitute to make these visible under UV illumination. The goal of this study was to show how luminescent tattoo inks could be excited with MV radiation and imaged during beam delivery for direct visualization of field position.METHODS:
A survey of nine UV-sensitive tattoo inks with various emission spectra were investigated using both UV and MV excitation. Images of liquid solutions were collected under MV excitation using an intensified-CMOS imager. Solid skin-simulating phantoms were imaged with both surface-painted ink and in situ tattooing during dose delivery by both a clinical linear accelerator and cobalt-60 source.RESULTS:
The UV inks have peak fluorescence emission ranging from approximately 440 to 600 nm with lifetimes near 11-16 µs. The luminescence intensity is approximately 6x higher during the x-ray pulse than after the pulse, however, the signal-to-noise is only approximately twice as large. Spatial resolution for imaging was achieved at 1.6 mm accuracy in a skin test phantom. Optical filtering allows for continuous imaging using a cobalt source and provides a mechanism to discriminate ink colors using a monochromatic image sensor.CONCLUSIONS:
This study demonstrates how low-cost inks can be used as fiducial markers and imaged both using time-gated and continuous modes during MV dose delivery. Phantom studies demonstrate the potential application of real-time field verification. Further studies are required to understand if this technique could be used as a tool for radiation dosimetry.Palavras-chave
Texto completo:
1
Base de dados:
MEDLINE
Assunto principal:
Aceleradores de Partículas
/
Tatuagem
/
Cobalto
/
Luminescência
/
Radioterapia Guiada por Imagem
/
Tinta
Idioma:
En
Ano de publicação:
2020
Tipo de documento:
Article