Flowability and Strength Characteristics of Binary Cementitious Systems Containing Silica Fume, Fly Ash, Metakaolin, and Glass Cullet Powder.
Materials (Basel)
; 16(19)2023 Sep 27.
Article
em En
| MEDLINE
| ID: mdl-37834574
ABSTRACT
The present study examines the effects of supplementary cementitious materials (SCMs) on the flowability and strength development of binary mixes. This study was primarily motivated by the need to bridge the knowledge gap regarding paste and mortar mixes containing binary cement from a variety of performance perspectives. This study examined the flowability and strength development of binary mixes in their pastes and mortars when they contain various doses of silica fume (SF), fly ash (FA), metakaolin (MK), and glass cullet powder (GP) compared with the control mix. While the presence of SF and MK reduced workability because of the nature of their particles, the addition of FA and GP improved it to a certain extent because of the spherical and glassy nature of their particles, respectively. In addition, GP was used to compare its performance against SF, MK, and FA as an alternative cementitious material. In this study, the GP performed comparably to the other SCMs investigated and was found to be satisfactory. An investigation of the rheological properties, heat of hydration, thermal analysis, and pore systems of these mixes was conducted. Compared to the control mix, the presence of 5% GP improved the rheological properties and reduced the heat of hydration by 10%. The reduced workability in SF and MK mixes resulted in a lower content of pore water, while GP and FA incorporation enhanced it, owing to improved workability. The pore area is related to the pore water, which is directly related to improved workability. According to the following order, SF > MK > GP > FA, the strength was highest for mixes containing SF and MK, whereas, with GP and FA, there was a gradual reduction in the strength proportional to replacement level and improved workability. SF, GP, and FA can be identified as performance enhancers when formulating ternary and quaternary cementitious systems for low-carbon cement.
Texto completo:
1
Base de dados:
MEDLINE
Idioma:
En
Ano de publicação:
2023
Tipo de documento:
Article