Spatial Localization of a Transformer Robot Based on Ultrasonic Signal Wavelet Decomposition and PHAT-ß-γ Generalized Cross Correlation.

ABSTRACT

Because large oil-immersed transformers are enclosed by a metal shell, the on-site localization means it is difficult to achieve the accurate location of the patrol micro-robot inside a given transformer. To address this issue, a spatial ultrasonic localization method based on wavelet decomposition and PHAT-ß-γ generalized cross correlation is proposed in this paper. The method is carried out with a five-element stereo ultrasonic array for the location of a transformer patrol robot. Firstly, the localization signal is decomposed into wavelet coefficients of different scales, which would realize the adaptive decomposition of the frequency of the localization signal from low frequencies to high frequencies. Then, the wavelet coefficients are denoised and reconstructed by using the semi-soft threshold function. Second, a modified phase transform-beta-gamma (PHAT-ß-γ) method is used to calculate the exact time delay between different sensors by increasing the weights of the PHAT weighting function and introducing a correlation function. Finally, by using the proposed method, the accurate localization of the transformer patrol micro-robot is achieved with a five-element stereo ultrasonic array. The simulation and test results show that inside a transformer experimental oil tank (120 cm × 100 cm × 100 cm, L × W × H), the relative error of transformer patrol micro-robot spatial localization is within 4.1%, and the maximum localization error is less than 3 cm, which meets the requirement of engineering localization.