Experimental Investigation of a Digital Quadrupole Inductively Coupled Plasma Mass Spectrometer for Elemental Analysis.

ABSTRACT

We describe the development and initial characterization of a digital waveform scanning quadrupole mass filter (digital QMF) used for inductively coupled plasma mass spectrometry (ICP-MS). Unlike a conventional voltage scanning QMF, in the digital QMF, the frequency of the digital waveform is scanned to filter ions with different m/z through the quadrupole, and m/z is proportional to 1/f2. In digital QMF, the duty cycle of the digital waveform driving the quadrupole is modified such that stability regions of interest are accessible for mass analysis with no DC voltage applied. Here, we evaluate the performance of our digital ICP-QMS instrument at several duty cycles and corresponding stability zones from zone 1 to zone 3,2. We demonstrate that, regardless of the stability zone used, frequency vs m/z calibration matches theory. For lower-order stability zones, the mass range of the analyzer is limited by the high-frequency waveform required; however, at zone 3,2, we demonstrate a mass range from at least 40 to 232 Th, which covers most of the elemental mass range. Similar to the conventional QMF, higher stability regions of the digital QMF can yield a higher resolution. We obtained the best resolution for our current instrument at zone 3,2 with a 62.50/37.50 duty cycle. The resolution at full-width at 10% peak height (R10%) was 1200 and 1100 for 115In+ and 232Th+, respectively. Lower pole bias yielded a R10% of 1400 for 40Ar+. Resolution and sensitivity comparisons indicate that higher q values and higher duty cycles lead to enhanced resolution, but lower sensitivity. Our results validate the operation of digital quadrupole ICP-MS and suggest that, with continuous improvement of electronics and instrumentation, a high resolution digital waveform scanning ICP-QMS for elemental analysis is possible.