Photocatalytic degradation of 2,4-dichlorophenoxyacetic acid by electrospun TiO2 nanofibres synthesised from two different titanium molecular precursors.

ABSTRACT

The evaluation of the photocatalytic properties of electrospun TiO2 nanofibres (TiO2-NFs) synthesised in the same experimental conditions using two distinct precursors, tetraisopropyl orthotitanate (TTIP) and tetrabutyl orthotitanate (TNBT), with morphology and crystalline structure controlled by annealing at 460 °C for 3 h is presented. The presence of circular-shaped TiO2-NFs was corroborated by scanning electron microscopy (SEM). By using X-ray photoelectron spectroscopy (XPS), the chemical binding energies and their interactions of the TiO2 with the different incorporated impurities were determined; the most intense photoelectronic transitions of Ti 2p3/2 (458.39 eV), O 1 s (529.65 eV) and C 1 s (284.51 eV) were detected for TTIP and slightly blue-shifted for TNBT. By using energy-dispersive X-ray spectroscopy (EDS), the chemical element percentages in TiO2 were determined. Using X-ray diffraction, it was found that the annealed electrospun TiO2-NFs presented the anatase crystalline phase and confirmed by Raman scattering. Bandgap energies were determined by diffuse reflectance spectroscopy at room temperature. The photocatalytic degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide under exposure to ultraviolet light was studied using the TiO2-NFs obtained with the two molecular precursors. The results showed that the catalyst, prepared with the TTIP precursor, turned out to be the one that presented the highest photocatalytic activity with a half-life time (t1/2) of 28 min and a degradation percentage of 93%. The total organic carbon (TOC) in the solutions resulting from the 2,4-D degradation by the TiO2-NFs was measured, which showed a TOC removal of 50.67% for the TTIP sample and 36.14% for the TNBT sample. Finally, by using FTIR spectroscopy, the final chemical compounds of the degradation were identified as H2O and CO2.