Evaluation of the 3M™ Petrifilm™ Rapid Yeast and Mold Count Plate for the Enumeration of Yeast and Mold in Food: Collaborative Study, First Action 2014.05.

The 3M™ Petrifilm™ Rapid Yeast and Mold (RYM) Count Plate is a simple, ready-to-use chromogenic culture method for the rapid detection and enumeration of yeast and mold in food products. The 3M Petrifilm RYM Count Plate method was compared to the U. S. Food and Drug Administration Bacteriological Analytical Manual (FDA BAM) Chapter 18, Yeasts, Molds and Mycotoxins and the ISO 21527:2008 Microbiology of Food and Animal Feeding Stuffs-Horizontal Method for the Enumeration for Yeast and Molds - Part 1: Colony Count Technique in Products with Water Activity Greater Than 0.95 and Part 2: Colony Count Technique in Products with Water Activity Less Than or Equal to 0.95 reference methods for raw almonds and raw frozen ground beef patties (77% lean). The 3M Petrifilm RYM Count Plate method was evaluated using a paired study design in a multi-laboratory collaborative study following the current AOAC Validation Guidelines. Three target contamination levels (low, 10-100 CFU/g; medium, 100-1000 CFU/g; high 1000-10 000 CFU/g) as well as an uninoculated control level (0 CFU/g) were evaluated for each matrix. Samples evaluated by the 3M Petrifilm RYM Count Plate method were prepared in duplicate and incubated at both 25°C and 28°C. Plates at both temperatures were enumerated after 48 and 60 h of incubation. No significant difference was observed between the 3M Petrifilm RYM Count Plate method and the FDA BAM or ISO 21527 reference methods for each contamination level. No statistical differences were observed between samples analyzed by the 3M Petrifilm RYM Count Plate method (at either 25°C or 28°C) and the reference methods. No statistical significant differences were observed between enumeration of colonies at 48 and 60 h on the 3M Petrifilm RYM Count Plate method and the reference methods.

Evaluation of 3M™ Molecular Detection Assay (MDA) Listeria monocytogenes for the Detection of Listeria monocytogenes in Selected Foods and Environmental Surfaces: Collaborative Study, First Action 2014.07.

The 3M™ Molecular Detection Assay (MDA) Listeria monocytogenes combines isothermal amplification and bioluminescence to detect Listeria monocytogenes with high specificity and efficiency in select foods and environmental samples. The 3M MDA Listeria monocytogenes method was evaluated using an unpaired study design in a multilaboratory collaborative study to the U.S. Department of Agriculture, Food Safety and Inspection Service Microbiology Laboratory Guidebook 8.09 (2011) Isolation and Identification of Listeria monocytogenes from Red Meat, Poultry, and Egg Products and Environmental Samples for deli turkey, and the AOAC Official Method of Analysis(SM) 993.12 Listeria monocytogenes in Milk and Dairy Products for full-fat (4% milk fat) cottage cheese following the current AOAC guidelines. A total of 16 laboratories located in the continental United States and Canada participated in this collaborative study. For deli turkey, 125 g test portions were evaluated using heat-stressed cells by each method. For full-fat cottage cheese, 25 g test portions were evaluated using nonheat-stressed cells. Each matrix had three inoculation levels: an uninoculated control level (0 CFU/test portion), and two levels artificially contaminated with L. monocytogenes, a low inoculum level (0.2-2 CFU/test portion) and a high inoculum level (2-5 CFU/test portion). In total, 1584 unpaired replicate samples were analyzed. Statistical analysis was conducted according to the probability of detection (POD) model. Results obtained for the low inoculum level full-fat cottage cheese test portions produced a difference in cross-laboratory POD (dLPOD) value of -0.08 with a 95% confidence interval (CI) of (-0.20, 0.05). For the low-level deli turkey test portions, a dLPOD value of -0.02 with a 95% CI of (-0.14, 0.11) was obtained.

Evaluation of 3M™ Molecular Detection Assay (MDA) Listeria for the Detection of Listeria species in Selected Foods and Environmental Surfaces: Collaborative Study, First Action 2014.06.

The 3M™ Molecular Detection Assay (MDA) Listeria is used with the 3M Molecular Detection System for the detection of Listeria species in food, food-related, and environmental samples after enrichment. The assay utilizes loop-mediated isothermal amplification to rapidly amplify Listeria target DNA with high specificity and sensitivity, combined with bioluminescence to detect the amplification. The 3M MDA Listeria method was evaluated using an unpaired study design in a multilaboratory collaborative study and compared to the AOAC Official Method of AnalysisSM (OMA) 993.12 Listeria monocytogenes in Milk and Dairy Products reference method for the detection of Listeria species in full-fat (4% milk fat) cottage cheese (25 g test portions). A total of 15 laboratories located in the continental United States and Canada participated. Each matrix had three inoculation levels: an uninoculated control level (0 CFU/test portion), and two levels artificially contaminated with Listeria monocytogenes, a low inoculum level (0.2-2 CFU/test portion) and a high inoculum level (2-5 CFU/test portion) using nonheat-stressed cells. In total, 792 unpaired replicate portions were analyzed. Statistical analysis was conducted according to the probability of detection (POD) model. Results obtained for the low inoculum level test portions produced a difference in cross-laboratory POD value of -0.07 with a 95% confidence interval of (-0.19, 0.06). No statistically significant differences were observed in the number of positive samples detected by the 3M MDA Listeria method versus the AOAC OMA method.

Validation of the Thermo Scientific SureTect Escherichia coli O157:H7 Real-Time PCR Assay for Raw Beef and Produce Matrixes.

The Thermo Scientific™ SureTect™ Escherichia coli O157:H7 Assay is a new real-time PCR assay which has been validated through the AOAC Research Institute (RI) Performance Tested Methods(SM) program for raw beef and produce matrixes. This validation study specifically validated the assay with 375 g 1:4 and 1:5 ratios of raw ground beef and raw beef trim in comparison to the U.S. Department of Agriculture, Food Safety Inspection Service, Microbiology Laboratory Guidebook (USDS-FSIS/MLG) reference method and 25 g bagged spinach and fresh apple juice at a ratio of 1:10, in comparison to the reference method detailed in the International Organization for Standardization 16654:2001 reference method. For raw beef matrixes, the validation of both 1:4 and 1:5 allows user flexibility with the enrichment protocol, although which of these two ratios chosen by the laboratory should be based on specific test requirements. All matrixes were analyzed by Thermo Fisher Scientific, Microbiology Division, Vantaa, Finland, and Q Laboratories Inc, Cincinnati, Ohio, in the method developer study. Two of the matrixes (raw ground beef at both 1:4 and 1:5 ratios) and bagged spinach were additionally analyzed in the AOAC-RI controlled independent laboratory study, which was conducted by Marshfield Food Safety, Marshfield, Wisconsin. Using probability of detection statistical analysis, no significant difference was demonstrated by the SureTect kit in comparison to the USDA FSIS reference method for raw beef matrixes, or with the ISO reference method for matrixes of bagged spinach and apple juice. Inclusivity and exclusivity testing was conducted with 58 E. coli O157:H7 and 54 non-E. coli O157:H7 isolates, respectively, which demonstrated that the SureTect assay was able to detect all isolates of E. coli O157:H7 analyzed. In addition, all but one of the nontarget isolates were correctly interpreted as negative by the SureTect Software. The single isolate giving a positive result was an E. coli O157:NM isolate. Nonmotile isolates of E. coli O157 have been demonstrated to still contain the H7 gene; therefore, this result is not unexpected. Robustness testing was conducted to evaluate the performance of the SureTect assay with specific deviations to the assay protocol, which were outside the recommended parameters and which are open to variation. This study demonstrated that the SureTect assay gave reliable performance. A final study to verify the shelf life of the product, under accelerated conditions was also conducted.

Evaluation of the 3M™ Petrifilm™ Salmonella express system for the detection of Salmonella species in selected foods: collaborative study.

The 3M™ Petriflm™ Salmonella Express (SALX) System is a simple, ready-to-use chromogenic culture medium system for the rapid qualitative detection and biochemical confirmation of Salmonella spp. in food and food process environmental samples. The 3M Petrifilm SALX System was compared using an unpaired study design in a multilaboratory collaborative study to the U.S. Department of Agriculture/Food Safety and Inspection Service (USDA/FSIS) Microbiology Laboratory Guidebook (MLG) 4.07 (2013) Isolation and Identification of Salmonella from Meat, Poultry, Pasteurized Egg and Catfish Products and Carcass and Environmental Sponges for raw ground beef and the U.S. Food and Drug Administration Bacteriological Analytical Manual (FDA/BAM) Chapter 5, Salmonella (2011) reference method for dry dog food following the current AOAC validation guidelines. For this study, a total of 17 laboratories located throughout the continental United States evaluated 1872 test portions. For the 3M Petrifilm SALX System, raw ground beef was analyzed using 25 g test portions, and dry dog food was analyzed using 375 g test portions. For the reference methods, 25 g test portions of each inatrix were analyzed. The two matrices were artificially contaminated with Salmonella at three inoculation levels: an uninoculated control level (0 CFU/test portion), a low inoculum level (0.2-2 CFU/test portion), and a high inoculum level (2-5 CFU/test portion). Each inoculation level was statistically analyzed using the probability of detection statistical model. For the raw ground beef and dry dog food test portions, no significant differences at the 95% confidence interval were observed in the number of positive samples detected by the 3M Petrifilm SALX System versus either the USDA/FSIS-MLG or FDA/BAM methods.

Evaluation of VIDAS UP Listeria assay (LPT) for the detection of Listeria in a variety of foods and environmental surfaces: First Action 2013.10.

The VIDAS UP Listeria (LPT) is an automated rapid screening enzyme phage-ligand based assay for the detection of Listeria species in human food products and environmental samples. The VIDAS LPT method was compared in a multi-laboratory collaborative study to AOAC Official Method 993.12 Listeria monocytogenes in Milk and Dairy Products reference method following current AOAC guidelines. A total of 14 laboratories participated, representing government and industry, throughout the United States. One matrix, queso fresco (soft Mexican cheese), was analyzed using two different test portion sizes, 25 and 125 g. Samples representing each test portion size were artificially contaminated with Listeria species at three levels, an uninoculated control level [0 colony-forming units (CFU)/test portion], a low-inoculum level (0.2-2 CFU/test portion), and a high-inoculum level (2-5 CFU/test portion). For this evaluation, 1800 unpaired replicate test portions were analyzed by either the VIDAS LPT or AOAC 993.12. Each inoculation level was analyzed using the Probability of Detection (POD) statistical model. For the low-level inoculated test portions, difference in collaborator POD (dLPOD) values of 0.01, (-0.10, 0.13), with 95% confidence intervals, were obtained for both 25 and 125 g test portions. The range of the confidence intervals for dLPOD values for both the 25 and 125 g test portions contains the point 0.0 indicating no statistically significant difference in the number of positive samples detected between the VIDAS LPT and the AOAC methods. In addition to Oxford agar, VIDAS LPT test portions were confirmed using Agar Listeria Ottavani and Agosti (ALOA), a proprietary chromogenic agar for the identification and differentiation of L. monocytogenes and Listeria species. No differences were observed between the two selective agars. The VIDAS LPT method, with the optional ALOA agar confirmation method, was adopted as Official First Action status for the detection of Listeria species in a variety of foods and environmental samples.

Evaluation of VIDAS Listeria monocytogenes Xpress (LMX) for the detection of Listeria monocytogenes in a variety of foods: First Action 2013.11.

The VIDAS Listeria monocytogenes Xpress (LMX) is an automated rapid screening enzyme immunoassay for the detection of Listeria monocytogenes in food products. The VIDAS LMX method was compared in a multi-laboratory collaborative study to AOAC Official Method 993.12 Listeria monocytogenes in Milk and Dairy Products reference method following current AOAC guidelines. A total of 14 laboratories participated, representing government and industry, throughout the United States. One matrix, queso fresco (soft Mexican cheese), was analyzed using two different test portion sizes, 25 and 125 g. Samples representing each portion size were artificially contaminated with L. monocytogenes at three levels: an uninoculated control level [0 colony forming units (CFU)/test portion], a low inoculum level (0.2-2 CFU/test portion), and a high inoculum level (2-5 CFU/test portion). For this evaluation, 1800 unpaired replicate test portions were analyzed by either the VIDAS LMX or AOAC 993.12. Each level was analyzed using the Probability of Detection (POD) statistical model. For the low-level inoculated test portions, difference in collaborator POD (dLPOD) values of 0.04, (-0.08, 0.15) and 0.01, (-0.10, 0.13), with 95% confidence intervals, were obtained, respectively, for 25 and 125 g test portions. The range of the confidence intervals for dLPOD values for both the 25 and 125 g test portions contain the point 0.0 indicating no statistically significant difference in the number of positive samples detected between the VIDAS LMX and the AOAC method. In addition to Oxford Agar (OXA), VIDAS LMX test portions were confirmed using Agar Listeria Ottavani and Agosti (ALOA), a proprietary chromogenic agar for the identification and differentiation of L. monocytogenes and Listeria species. No differences were observed between the two selective agars. The VIDAS LMX method, with the optional ALOA agar confirmation method, was adopted as Official First Action status for the detection of L. monocytogenes in a variety of foods.

Evaluation of VIDAS UP Salmonella (SPT) assay for the detection of Salmonella in a variety of foods and environmental samples: collaborative study.

The VIDAS UP Salmonella (SPT) uses recombinant phage proteins to detect Salmonella species in human and animal food products and production environmental samples after 18-26 h of enrichment. The VIDAS SPT assay is performed with the automated VIDAS or mini-VIDAS instruments. The VIDAS SPT method was compared in a multilaboratory collaborative study to the U.S. Department of Agriculture/Food Safety and Inspection Service-Microbiology Laboratory Guidebook (USDA/FSIS-MLG) 4.05 (2011) Isolation and Identification of Salmonella from Meat, Poultry, Pasteurized Egg and Catfish Products reference method following the current AOAC guidelines. A total of 15 laboratories representing government, academia, and industry throughout the United States participated. One matrix, raw ground beef, was analyzed using two different test portion sizes, 25 and 375 g. Each test portion was artificially contaminated with Salmonella at three inoculation levels, an uninoculated control level (0 CFU/test portion), a low inoculum level (0.2-2 CFUltest portion), and a high inoculum level (2-5 CFU/test portion). In this study, 1656 unpaired replicate samples were analyzed. Of those unpaired replicates, 476 were presumptive positive by the VIDAS method, with 475 confirmed positive by the traditional confirmation procedures and 476 confirmed positive by an alternative confirmation procedure. There were 411 confirmed positive replicates by the USDA/FSIS-MLG reference method. Statistical analysis was conducted according to the probability of detection (POD). For the low-level 375 g test portions, the following dLPOD values, with 95% confidence intervals, were obtained: 0.01 (-0.12, +0.15) for samples confirmed following the traditional confirmation; 0.02 (-0.18, +0.2) for samples confirmed following traditional confirmation on IBISA and ASAP; and 0.03 (-0.18, +0.24) for samples confirmed following the alternative confirmation on IBISA and ASAP. For the low-level 25 g test portions, the following dLPOD values, with 95% confidence intervals, were obtained: 0.41, (0.32, +0.49) for samples confirmed following the traditional confirmation, the traditional confirmation on IBISA and ASAP, and the alternative confirmation on IBISA and ASAP. With 0.0 within the confidence intervals for the 375 g test portions, there was no statistically significant difference in the number of positive samples detected by the VIDAS SPT method and the USDA/FSIS-MLG method at the 0.05 level. For the 25 g test portions, a statistically significant difference was observed between the VIDAS SPT method and the reference method for the low inoculum level, where the VIDAS SPT method recovered a higher number of positive results than the reference method. It is recommended that the VIDAS SPT method with the optional ASAP and IBISA agar confirmation method be adopted for Official First Action status for the detection of Salmonella in a variety of foods and environmental samples.

Evaluation of 3M molecular detection assay (MDA) Salmonella for the detection of Salmonella in selected foods: collaborative study.

The 3M Molecular Detection Assay (MDA) Salmonella is used with the 3M Molecular Detection System for the detection of Salmonella spp. in food, food-related, and environmental samples after enrichment. The assay utilizes loop-mediated isothermal amplification to rapidly amplify Salmonella target DNA with high specificity and sensitivity, combined with bioluminescence to detect the amplification. The 3M MDA Salmonella method was compared using an unpaired study design in a multilaboratory collaborative study to the U.S. Department of Agriculture/Food Safety and Inspection Service-Microbiology Laboratory Guidebook (USDA/FSIS-MLG 4.05), Isolation and Identification of Salmonella from Meat, Poultry, Pasteurized Egg and Catfish Products for raw ground beef and the U.S. Food and Drug Administration/Bacteriological Analytical Manual (FDA/BAM) Chapter 5 Salmonella reference method for wet dog food following the current AOAC guidelines. A total of 20 laboratories participated. For the 3M MDA Salmonella method, raw ground beef was analyzed using 25 g test portions, and wet dog food was analyzed using 375 g test portions. For the reference methods, 25 g test portions of each matrix were analyzed. Each matrix was artificially contaminated with Salmonella at three inoculation levels: an uninoculated control level (0 CFU/test portion), a low inoculum level (0.2-2 CFU/test portion), and a high inoculum level (2-5 CFU/test portion). In this study, 1512 unpaired replicate samples were analyzed. Statistical analysis was conducted according to the probability of detection (POD). For the low-level raw ground beef test portions, the following dLPOD (difference between the POD of the reference and candidate method) values with 95% confidence intervals were obtained: -0.01 (-0.14, +0.12). For the low-level wet dog food test portions, the following dLPOD with 95% confidence intervals were obtained: -0.04 (-0.16, +0.09). No significant differences were observed in the number of positive samples detected by the 3M MDA Salmonella method versus either the USDA/FSIS-MLG or FDA/BAM methods.

Evaluation of the VITEK 2 gram positive (GP) microbial identification test card: collaborative study.

A collaborative study was conducted to evaluate the performance of the VITEK 2 Gram Positive (GP) identification card for use with the VITEK 2 automated microbial identification system. The GP test card is used in the identification of selected Gram positive organisms, including Listeria and Staphylococcus species. The VITEK 2 GP card is based on 43 biochemical tests measuring carbon source utilization, inhibition and resistance, and enzymatic activities. A total of 20 laboratories representing government, industry, and private testing laboratories throughout the United States participated. In this study, 720 Gram-positive inclusivity isolates were analyzed by the GP Identification method. Of the 720 well-characterized isolates, 714 were identified correctly, zero were misidentified, zero were unidentified, and six were not characterized as a Gram-positive organism by the VITEK 2 GP method. Additionally, 120 strains exclusive of Gram-positive organisms were screened by Gram stain. A total of 106 isolates were correctly excluded. Fourteen organisms were incorrectly characterized by Gram stain procedures, thus resulting in improper analysis and misidentification by VITEK GP. The VITEK 2 GP identification method is an acceptable automated method for the rapid identification of selected Gram-positive bacteria.

Evaluation of the VITEK 2 Gram-negative (GN) microbial identification test card: collaborative study.

A collaborative study was conducted to evaluate the performance of the VITEK 2 Gram-negative (GN) Identification card for use with the VITEK 2 automated microbial identification system. The GN test card is used in the identification of fermenting and nonfermenting Gram-negative bacilli, including the select agent organisms Brucella melitensis, Francisella tularensis, Burkholderia mallei, B. pseudomallei, and Yersinia pestis. The VITEK 2 GN card is based on 47 biochemical tests measuring carbon source utilization, inhibition and resistance, and enzymatic activities. A total of 20 laboratories representing government, industry, and private testing facilities throughout the United States participated. In this study, 720 Gram-negative inclusivity isolates were analyzed by the GN Identification method. Of the 720 well-characterized isolates, 707 were identified correctly, 0 were misidentified, 0 were unidentified, and 13 were not characterized as a Gram-negative organism. Additionally, 120 isolates exclusive of fermenting and nonfermenting Gram-negative bacilli were screened by Gram stain. A total of 117 isolates were correctly excluded. Three organisms were incorrectly characterized by Gram stain procedures, resulting in incorrect analysis and misidentification by VITEK 2 GN. The VITEK 2 GN identification method is an acceptable automated method for the rapid identification of Gram-negative bacteria.

Validation of the Clear Safety Listeria Method for Detection of Listeria Species in Hot Dogs and on Environmental Surface Matrixes: AOAC Performance Tested MethodSM 091901.

BACKGROUND: The Clear Safety Listeria method utilizes polymerase chain reaction (PCR) amplification and targeted next-generation sequencing technology to detect Listeria species (L. monocytogenes, L. innocua, L. ivanovii, L. marthii, L. grayi, L. welshimeri, and L. seeligeri) in hot dogs and on selected environmental surfaces. OBJECTIVE: The aim was to validate the candidate method according to current AOAC guidelines. METHOD: The candidate method was compared to the reference method for hot dogs and the environmental surfaces. The method was also evaluated for inclusivity and exclusivity using 50 inclusivity strains and 30 exclusivity strains for each reported target. Product consistency and stability was tested and robustness was evaluated with changes in enrichment temperature, volume of sample treatment, and aliquot volume for PCR. RESULTS: The candidate method demonstrated no statistically significant differences using the probability of detection model between candidate and reference methods or between presumptive and confirmed results for all environmental surfaces and hot dogs. Additionally, the candidate method detected all inclusivity organisms and excluded all exclusivity organisms for each reported target. Product lots were shown to be consistent and data supported the kit's shelf life. Finally, the robustness study demonstrated no statistical differences when the volume of sample or the aliquot volume for PCR was altered. Increasing the incubation temperature to 37 ± 1 °C resulted in greater recovery of L. monocytogenes as compared to 35 ± 1 °C and 30 ± 1 °C. CONCLUSIONS: The Clear Safety Listeria method is statistically equivalent to the reference methods for the detection of L. monocytogenes and Listeria spp. in hot dogs and on selected environmental surfaces. HIGHLIGHTS: The Clear Safety Listeria method is an automated, highthroughput NGS-based method capable of detecting Listeria species in the hot dog and environmental samples within 28h.

Validation of the Thermo Scientific SureTect™ Escherichia coli O157:H7 and STEC Screening PCR Assay and SureTect™ Escherichia coli STEC Identification PCR Assay for the Detection of Escherichia coli O157:H7 and the Escherichia coli STEC Serotypes (O26, O45, O103, O111, O121, O145) from Fresh Raw Spinach, Fresh Baby Leaves, Fresh Cut Tomatoes, Frozen Raw Beef, Raw Beef Trim, and Beef Carcass Sponges: AOAC Performance Tested MethodSM 012102.

BACKGROUND: The Thermo Scientific SureTect™ Escherichia coli O157:H7 and STEC Screening PCR Assay and SureTect Escherichia coli STEC Identification PCR Assay are real-time PCR kits for the rapid detection of E. coli O157:H7 and non-E. coli O157 Shiga toxin-producing E. coli (STEC) serotypes (O26, O45, O103, O111, O121, O145) from fresh raw spinach, fresh baby leaves, fresh cut tomatoes, frozen raw beef, raw beef trim, and beef carcass sponges. OBJECTIVE: Both assays were evaluated for AOAC®Performance Tested MethodsSM certification. METHODS: Detection and confirmation inclusivity/exclusivity, matrix, product consistency and stability, and robustness studies were conducted. In the matrix studies, the candidate method was validated against United States and international reference methods for STEC serotypes. RESULTS: Matrix studies showed no statistically significant differences between the candidate and reference method results when analyzed by probability of detection. For each inclusivity/exclusivity study, all inclusivity strains and no exclusivity strains were detected by either kit. Robustness testing demonstrated that the identification assay performed reliably despite method deviations; however, although not statistically significant, the screening assay performance was impacted. Product consistency and stability testing demonstrated no statistically significant differences between kit lots and storage time points. CONCLUSION: The data presented show that both assays constitute a rapid and reliable workflow for the detection and confirmation of E. coli O157:H7 and stipulated non-E. coli O157:H7 STEC serotypes from the tested matrixes. HIGHLIGHTS: Results are obtained in 80 min post-enrichment with both assays run simultaneously, allowing for the detection and confirmation of STEC within a single workflow.

Validation of the Thermo Scientific SureTect™ Campylobacter jejuni, C. coli, and C. lari PCR Kit for the Detection of Campylobacter jejuni, C. coli, and C. lari in Raw Poultry and Ready-to-Cook Poultry Products: AOAC Performance Tested MethodSM 012101.

BACKGROUND: The Thermo Scientific SureTect™ Campylobacter jejuni, C. coli, and C. lari PCR Kit is a real-time PCR assay for the detection and differentiation of C. jejuni, C. coli, and C. lari from raw poultry, ready-to-cook poultry products, and environmental samples. OBJECTIVE: The Thermo Scientific SureTect Campylobacter jejuni, C. coli, and C. lari PCR Kit was evaluated for AOAC®Performance Tested MethodsSM certification. METHODS: Inclusivity/exclusivity, matrix studies, product consistency and stability, and robustness testing were conducted to assess the method's performance. In the matrix studies, the method was validated against United States and international reference methods for Campylobacter detection. RESULTS: There were no statistically significant differences found in the matrix studies between the candidate and reference methods when analyzed by probability of detection. All 52 inclusivity strains and none of the 51 exclusivity strains tested were detected by the assay. Robustness testing demonstrated that the assay gave reliable performance with specific method deviations outside of the recommended parameters, and the real-time stability testing demonstrated that there were no statistically significant differences between kit lots, validating the stated shelf life of the kit. CONCLUSION: The data presented support the product claims that the Thermo Scientific SureTect Campylobacter jejuni, C. coli, and C. lari PCR assay is suitable for the detection and differentiation of C. jejuni, C. coli, and C. lari from raw poultry, ready-to-cook poultry products, and environmental samples. HIGHLIGHTS: Presumptive results can be obtained in as little as 23 h. Microaerophilic incubators are not required for enrichment.

Validation of the Modified Clear Safety Salmonella for Detection of Salmonella enterica in Selected Poultry and Pet Food Matrixes and on Stainless Steel: AOAC Performance Tested MethodSM 111802.

BACKGROUND: The Clear Safety Salmonella method was modified to improve sample preparation, PCR reagents, library preparation, flow cell quality control, library loading mix, priming mix, and sequencing kit reagents and steps. OBJECTIVE: To evaluate the modified Clear Safety Salmonella method (manual and automated) via independent and method developer validation studies according to current AOAC INTERNATIONAL Validation Guidelines. METHOD: Performance of the modified Clear Safety Salmonella method (manual and automated) was assessed for selectivity (using 105 inclusive and 30 exclusive strains), probability of detection in matrixes, product consistency, stability, and robustness. The modified Clear Safety Salmonella method was compared with the appropriate reference method for Salmonella detection on 4 inch × 4 inch stainless steel environmental surfaces, and in chicken carcass rinse (30 mL), raw ground chicken (375 g), dry pet food (375 g), and ready-to-eat deli turkey breast (375 g). RESULTS: The modified Clear Safety Salmonella method (manual and automated) demonstrated no statistically significant differences between the candidate and reference method probability of detection or between the presumptive and confirmed results for all target food matrixes and the stainless steel surface. Additionally, the modified method (manual and automated) detected all 105 inclusivity organisms and excluded all 30 exclusivity organisms. The product consistency and kit stability studies showed no statistical differences between lots or over the term of the kit's shelf life. In robustness studies, changes in enrichment time, diluted sample volume, and sample volume for PCR did not show any statistical difference in terms of assay performance. CONCLUSIONS: The modified Clear Safety Salmonella method (both manual and automated) is statistically equivalent to or better than the reference methods. HIGHLIGHTS: The Clear Safety Salmonella method utilizes PCR amplification and targeted next-generation sequencing technology to selectively detect Salmonella enterica.

Evaluation of VIDAS Salmonella (SLM) easy Salmonella method for the detection of Salmonella in a variety of foods: collaborative study.

The VIDAS Salmonella (SLM) Easy Salmonella method is a specific enzyme-linked fluorescent immunoassay performed in the automated VIDAS instrument. The VIDAS Easy Salmonella method is a simple 2-step enrichment procedure, using pre-enrichment followed by selective enrichment in a newly formulated broth, SX2 broth. This new method was compared in a multilaboratory collaborative study to the U.S. Food and Drug Administration's Bacteriological Analytical Manual, Chapter 5 method for five food matrixes (liquid egg, vanilla ice cream, spinach, raw shrimp, and peanut butter) and the U.S. Department of Agriculture's Microbiology Laboratory Guidebook 4.04 method for deli turkey. Each food type was artificially contaminated with Salmonella at three inoculation levels. A total of 15 laboratories representing government, academia, and industry, throughout the United States, participated. In this study, 1583 samples were analyzed, of which 792 were paired replicates and 791 were unpaired replicates. Of the 792 paired replicates, 285 were positive by both the VIDAS and reference methods. Of the 791 unpaired replicates, 341 were positive by the VIDAS method and 325 were positive by the cultural reference method. A Chi-square analysis of each of the six food types was performed at the three inoculation levels tested. For all foods evaluated, the VIDAS Easy SLM method demonstrated results comparable to those of the reference methods for the detection of Salmonella.

TEMPO EC for the enumeration of Escherichia coli in foods: collaborative study.

The automated method for enumeration of Escherichia coli, TEMPO EC, in foods uses a dehydrated culture medium and enumeration card containing 48 wells across three different dilutions for the automatic determination of the most probable number (MPN). The alternative method was compared in a multilaboratory collaborative study to AOAC Official Method 966.24. Six food types were artificially contaminated with E. coli: raw ground beef, bagged lettuce, cooked chicken, pasteurized crabmeat, frozen green beans, and pasteurized whole milk. All foods were analyzed for E. coli counts by 11 collaborating laboratories throughout the United States. Test portions from the six food types each contaminated at four different contamination levels were evaluated. The study demonstrated that the TEMPO EC method is a reliable, automated assay for the enumeration of E. coli in foods.

Evaluation of the MC-Media Pad® Rapid Aerobic Count Device for the Enumeration of Total Aerobic Counts in a Variety of Foods: Collaborative Study, First Action Official MethodSM 2019.02.

BACKGROUND: The MC-Media Pad® Rapid Aerobic Count (RAC) is a ready-to-use culture device combining a test pad coated with medium and water absorption polymers that are designed for the rapid quantification of total aerobic bacteria in food products. OBJECTIVE: The MC-Media Pad RAC was compared to the U.S. Department of Agriculture Food Safety and Inspection Service Microbiology Laboratory Guidebook, Chapter 3.02: Quantitative Analysis of Bacteria in Foods as Sanitary Indicators for raw ground pork and the Standard Methods for the Examination of Dairy Products, Chapter 6: Microbial Count Methods for yogurt drink. METHOD: The candidate method was evaluated against the reference methods using a paired study design in a multi-collaborator study, following the current AOAC INTERNATIONAL Official Methods of AnalysisSM Appendix J guidelines. Three target contamination levels (low, medium, and high) were evaluated. MC-Media Pad RAC devices were enumerated after 24 and 48 h of incubation. RESULTS: Plate counts obtained by both methods were log10-transformed and the difference of means (including 95% confidence intervals), repeatability SD, and reproducibility SD were determined for each contamination level. All 95% confidence intervals for mean difference fell easily within ±0.10, the performance requirement being ±0.5. CONCLUSION: The MC-Media Pad RAC (for both 24 and 48 h) and both reference methods for each contamination level were therefore shown to be equivalent, with 97.5% confidence. HIGHLIGHTS: The new method offers a convenient alternative to the reference methods for detection of aerobic plate count in food products, yielding reliable and comparable results in 24 or 48 h compared to 48 h for the reference methods.

Evaluation of the Solus One Salmonella Assay in Select Foods: Collaborative Study: First Action 2020.03.

BACKGROUND: The Solus One Salmonella immunoassay utilizes Salmonella specific selective media and automated liquid handling, for the rapid and specific detection of Salmonella species in select food types. OBJECTIVE: The candidate method was evaluated using 375 g test portions in an unpaired study design for a single matrix, instant non-fat dry milk (NFDM) powder. METHOD: The matrix was compared to the United States Food and Drug Administration/Bacteriological Analytical Manual (FDA/BAM) Chapter 5 Salmonella reference method. Eleven participants from 10 laboratories within academia and industry, located within the United States, Mexico, South Africa, Germany, and the United Kingdom, contributed data for the collaborative study. Three levels of contamination were evaluated for each matrix: an uninoculated control level [0 colony forming units (CFU)/test portion], a low inoculum level (0.2-2 CFU/test portion) and a high inoculum level (2-5 CFU/test portion). Statistical analysis was conducted according to the Probability of Detection (POD) statistical model. RESULTS: Results obtained for the low inoculum level test portions produced a dLPOD value with a 95% confidence interval between the candidate method confirmed (both alternative and conventional confirmation procedures) and the reference method of 0.07 (-0.02, 0.15). CONCLUSIONS: The dLPOD results indicate equivalence between the candidate method and the reference method for the matrix evaluated and the method demonstrated acceptable inter-laboratory reproducibility as determined in the collaborative evaluation. False positive and false negative rates were determined for the matrix and produce values of <2%. HIGHLIGHTS: Based on the data generated, the method demonstrated acceptable inter-laboratory reproducibility data and statistical analysis.

Evaluation of the 3M™ Petrifilm™ Rapid E. coli/Coliform Count Plate for the Enumeration of E. coli and Coliforms: Collaborative Study, First Action: 2018.13.

BACKGROUND: The 3M™ Petrifilm™ Rapid E. coli/Coliform Count Plate is a selective and differential sample-ready-culture medium designed for the rapid enumeration of Escherichia coli (E. coli) and coliforms in the food and beverage industries. OBJECTIVE: The 3M Petrifilm Rapid E. coli/Coliform Count Plate was compared to the U.S. Food and Drug Administration Bacteriological Analytical Manual (BAM) Chapter 4 Enumeration of Escherichia coli and the Coliform Bacteria, the International Organization of Standards (ISO) 4832:2006 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coliforms-Colony-count technique, and ISO 16649-2:2017 Microbiology of food and animal feeding stuffs-Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli-Part 2 Colony-count technique at 44 degrees C using bromo-4-chloro-3- indolyl beta-D-glucuronide methods for the enumeration of E. coli and coliforms in dry dog kibble. METHOD: The candidate method was evaluated using two diluents, Butterfield's phosphate buffered diluent and peptone salt solution, in a paired study design with each reference method in a multi-laboratory collaborative study following the current AOAC Validation Guidelines. Three target contamination levels and an uninoculated control level were evaluated. RESULTS: The candidate and reference methods were not statistically different at each contamination level. Reproducibility values obtained during the collaborative study were similar between the candidate and reference methods. CONCLUSION: These results demonstrate that the candidate method is equivalent to the reference methods. HIGHLIGHT: 3M Petrifilm Rapid E. coli/Coliform Count Plate was recommended for Official First Action status for enumeration of E. coli and coliforms in a broad range of foods and environmental surfaces.