High-Efficiency FRET Processes in BODIPY-Functionalized Quantum Dot Architectures.

Efficient FRET systems are developed combining colloidal CdSe quantum dots (QDs) donors and BODIPY acceptors. To promote effective energy transfer in FRET architectures, the distance between the organic fluorophore and the QDs needs to be optimized by a careful system engineering. In this context, BODIPY dyes bearing amino-terminated functionalities are used in virtue of the high affinity of amine groups in coordinating the QD surface. A preliminary QD surface treatment with a short amine ligand is performed to favor the interaction with the organic fluorophores in solution. The successful coordination of the dye to the QD surface, accomplishing a short donor-acceptor distance, provides effective energy transfer already in solution, with efficiency of 76 %. The efficiency further increases in the solid state where the QDs and the dye are deposited as single coordinated units from solution, with a distance between the fluorophores down to 2.2 nm, demonstrating the effectiveness of the coupling strategy.

High Surface Area Mesoporous Silica Nanoparticles with Tunable Size in the Sub-Micrometer Regime: Insights on the Size and Porosity Control Mechanisms.

Mesoporous silica nanostructures (MSNs) attract high interest due to their unique and tunable physical chemical features, including high specific surface area and large pore volume, that hold a great potential in a variety of fields, i.e., adsorption, catalysis, and biomedicine. An essential feature for biomedical application of MSNs is limiting MSN size in the sub-micrometer regime to control uptake and cell viability. However, careful size tuning in such a regime remains still challenging. We aim to tackling this issue by developing two synthetic procedures for MSN size modulation, performed in homogenous aqueous/ethanol solution or two-phase aqueous/ethyl acetate system. Both approaches make use of tetraethyl orthosilicate as precursor, in the presence of cetyltrimethylammonium bromide, as structure-directing agent, and NaOH, as base-catalyst. NaOH catalyzed syntheses usually require high temperature (>80 °C) and large reaction medium volume to trigger MSN formation and limit aggregation. Here, a successful modulation of MSNs size from 40 up to 150 nm is demonstrated to be achieved by purposely balancing synthesis conditions, being able, in addition, to keep reaction temperature not higher than 50 °C (30 °C and 50 °C, respectively) and reaction mixture volume low. Through a comprehensive and in-depth systematic morphological and structural investigation, the mechanism and kinetics that sustain the control of MSNs size in such low dimensional regime are defined, highlighting that modulation of size and pores of the structures are mainly mediated by base concentration, reaction time and temperature and ageing, for the homogenous phase approach, and by temperature for the two-phase synthesis. Finally, an in vitro study is performed on bEnd.3 cells to investigate on the cytotoxicity of the MNSs.

Gold-Speckled SPION@SiO2 Nanoparticles Decorated with Thiocarbohydrates for ASGPR1 Targeting: Towards HCC Dual Mode Imaging Potential Applications.

Efforts are made to perform an early and accurate detection of hepatocellular carcinoma (HCC) by simultaneous exploiting multiple clinically non-invasive imaging modalities. Original nanostructures derived from the combination of different inorganic domains can be used as efficient contrast agents in multimodal imaging. Superparamagnetic iron oxide nanoparticles (SPIONs) and Au nanoparticles (NPs) possess well-established contrasting features in magnetic resonance imaging (MRI) and X-ray computed tomography (CT), respectively. HCC can be targeted by using specific carbohydrates able to recognize asialoglycoprotein receptor 1 (ASGPR1) overexpressed in hepatocytes. Here, two different thiocarbohydrate ligands were purposely designed and alternatively conjugated to the surface of Au-speckled silica-coated SPIONs NPs, to achieve two original nanostructures that could be potentially used for dual mode targeted imaging of HCC. The results indicated that the two thiocarbohydrate decorated nanostructures possess convenient plasmonic/superparamagnetic properties, well-controlled size and morphology and good selectivity for targeting ASGPR1 receptor.

PbS Quantum Dots Decorating TiO2 Nanocrystals: Synthesis, Topology, and Optical Properties of the Colloidal Hybrid Architecture.

Fabrication of heterostructures by merging two or more materials in a single object. The domains at the nanoscale represent a viable strategy to purposely address materials' properties for applications in several fields such as catalysis, biomedicine, and energy conversion. In this case, solution-phase seeded growth and the hot-injection method are ingeniously combined to fabricate TiO2/PbS heterostructures. The interest in such hybrid nanostructures arises from their absorption properties that make them advantageous candidates as solar cell materials for more efficient solar light harvesting and improved light conversion. Due to the strong lattice mismatch between TiO2 and PbS, the yield of the hybrid structure and the control over its properties are challenging. In this study, a systematic investigation of the heterostructure synthesis as a function of the experimental conditions (such as seeds' surface chemistry, reaction temperature, and precursor concentration), its topology, structural properties, and optical properties are carried out. The morphological and chemical characterizations confirm the formation of small dots of PbS by decorating the oleylamine surface capped TiO2 nanocrystals under temperature control. Remarkably, structural characterization points out that the formation of heterostructures is accompanied by modification of the crystallinity of the TiO2 domain, which is mainly ascribed to lattice distortion. This result is also confirmed by photoluminescence spectroscopy, which shows intense emission in the visible range. This originated from self-trapped excitons, defects, and trap emissive states.

Encapsulation of Curcumin-Loaded Liposomes for Colonic Drug Delivery in a pH-Responsive Polymer Cluster Using a pH-Driven and Organic Solvent-Free Process.

The present study aimed to develop and optimize liposome formulation for the colonic delivery of biologically active compounds. A strategy to facilitate such targeting is to formulate liposomes with a polymer coating sensitive to the pH shifts in the gastrointestinal tract. To this end, liposomes encapsulating curcumin-chosen as the biologically active compound model-and coated with the pH-responsive polymer Eudragit S100 were prepared and characterized. Curcumin was encapsulated into small unilamellar vesicles (SUVs) by the micelle-to-vesicle transition method (MVT) in a simple and organic solvent-free way. Curcumin-loaded liposomes were coated with Eudragit S100 by a fast and easily scalable pH-driven method. The prepared liposomes were evaluated for size, surface morphology, entrapment efficiency, stability, in vitro drug release, and curcumin antioxidant activity. In particular, curcumin-loaded liposomes displayed size lower than 100 nm, encapsulation efficiency of 98%, high stability at both 4 °C and 25 °C, high in vitro antioxidant activity, and a cumulative release that was completed within 200 min. A good Eudragit S100 coating which did not alter the properties of the curcumin-loaded liposomes was obtained. The present work therefore provides a fast and solvent-free method to prepare pH-responsive polymer-coated liposomes for the colonic delivery of biologically active compounds.

Unveiling the compositional variety of cardiolipins in Rhodobacter sphaeroides by liquid chromatography with electrospray ionization and multistage collision-induced dissociation mass spectrometry.

Cardiolipins (CL) contained in the lipid extracts of the photosynthetic bacterium Rhodobacter sphaeroides (strain R26) were systematically characterized by reversed-phase liquid chromatography coupled to electrospray ionization mass spectrometry, performed in single (MS), tandem (MS/MS) and sequential (MS3) modes using a linear ion trap mass spectrometer. The total number of carbon atoms and C=C bonds of each CL and, subsequently, those related to each of the constituting phosphatidic acid (PA) units, along with the location of the latter on the central glycerol backbone, were inferred from MS and MS/MS data, respectively. Moreover, the composition and location of both acyl chains on the glycerol backbone of each PA unit was obtained by MS3 measurements, an approach used for the first time for the structural elucidation of CL in R. sphaeroides. As a result, an unprecedented profile of CL in this bacterium was obtained, with 27 main species characterized, many of which are represented by compositional or regiochemical isomers. Interestingly, such a variability is generated from a limited number of different acyl chains, either saturated (i.e. 12:0, 16:0, 17:0, 18:0, 19:0) or mono-unsaturated (16:1, 18:1). The absence of polyunsaturated chains, more susceptible to oxidation damage, appeared to be indirectly related to the lack of carotenoids potentially acting as antioxidant agents, a specific feature of R. sphaeroides R26. The occurrence of odd-numbered acyl chains was ascribed to the need to guarantee membrane fluidity, through a less compact packing of CL, thus compensating for the lack of CL bearing polyunsaturated side chains. Graphical abstract Representation of MS signals due to carboxylate anions that would be detected, as separate couples, in the fragmentation spectra of the anions resulting from the two phosphatidic acid units included in a cardiolipin molecule bearing four different acyl chains.

Isotope ratio mass spectrometry in combination with chemometrics for characterization of geographical origin and agronomic practices of table grape.

BACKGROUND: Although table grape is one of the most cultivated and consumed fruits worldwide, no study has been reported on its geographical origin or agronomic practice based on stable isotope ratios. This study aimed to evaluate the usefulness of isotopic ratios (i.e. 2 H/1 H, 13 C/12 C, 15 N/14 N and 18 O/16 O) as possible markers to discriminate the agronomic practice (conventional versus organic farming) and provenance of table grape. RESULTS: In order to quantitatively evaluate which of the isotopic variables were more discriminating, a t test was carried out, in light of which only δ13 C and δ18 O provided statistically significant differences (P ≤ 0.05) for the discrimination of geographical origin and farming method. Principal component analysis (PCA) showed no good separation of samples differing in geographical area and agronomic practice; thus, for classification purposes, supervised approaches were carried out. In particular, general discriminant analysis (GDA) was used, resulting in prediction abilities of 75.0 and 92.2% for the discrimination of farming method and origin respectively. CONCLUSION: The present findings suggest that stable isotopes (i.e. δ18 O, δ2 H and δ13 C) combined with chemometrics can be successfully applied to discriminate the provenance of table grape. However, the use of bulk nitrogen isotopes was not effective for farming method discrimination. © 2016 Society of Chemical Industry.

Synthetic Antenna Functioning As Light Harvester in the Whole Visible Region for Enhanced Hybrid Photosynthetic Reaction Centers.

The photosynthetic reaction center (RC) from the Rhodobacter sphaeroides bacterium has been covalently bioconjugated with a NIR-emitting fluorophore (AE800) whose synthesis was specifically tailored to act as artificial antenna harvesting light in the entire visible region. AE800 has a broad absorption spectrum with peaks centered in the absorption gaps of the RC and its emission overlaps the most intense RC absorption bands, ensuring a consistent increase of the protein optical cross section. The covalent hybrid AE800-RC is stable and fully functional. The energy collected by the artificial antenna is transferred to the protein via FRET mechanism, and the hybrid system outperforms by a noteworthy 30% the overall photochemical activity of the native protein under the entire range of visible light. This improvement in the optical characteristic of the photoenzyme demonstrates the effectiveness of the bioconjugation approach as a suitable route to new biohybrid materials for energy conversion, photocatalysis, and biosensing.

Promoting oxygen vacancy formation and p-type conductivity in SrTiO3via alkali metal doping: a first principles study.

Strontium titanate (SrTiO3, STO) is a prototypical perovskite oxide, widely exploited in many technological applications, from catalysis to energy conversion devices. In the context of solid-oxide fuel cells, STO has been recently applied as an epitaxial substrate for nano-sized layers of mixed ion-electron conductive catalysts with enhanced electrochemical performances. To extend the applications of such heterogeneous nano-cathodes in real devices, also the STO support should be active for both electron transport and oxide diffusion. To this end, we explored using first-principles calculations the strategy of doping of STO at the Sr site with sodium and potassium. These two ions fit in the perovskite structure and induce holes in the STO valence band, so as to obtain the desired p-type electronic conduction. At the same time, the doping with alkali ions also promotes the formation of oxygen vacancies in STO, a prerequisite for effective oxide diffusion. Analysis of electron density rearrangements upon defect formation allows relating the favorable vacancy formation energies to an improved electronic delocalization over the oxide sub-lattice, as observed in closely related materials (e.g. Sr2Fe1.5Mo0.5O6). Overall, our results suggest the alkali-doped STO as a new potential substrate material in nanoscale heterogeneous electrodes for solid oxide electrochemical cells.

Fabrication of photoactive heterostructures based on quantum dots decorated with Au nanoparticles.

Silica based multifunctional heterostructures, exhibiting near infrared (NIR) absorption (650-1200 nm) and luminescence in the visible region, represent innovative nanosystems useful for diagnostic or theranostic applications. Herein, colloidal synthetic procedures are applied to design a photoactive multifunctional nanosystem. Luminescent silica (SiO2) coated quantum dots (QDs) have been used as versatile nanoplatforms to assemble on their surface gold (Au) seeds, further grown into Au spackled structures. The synthesized nanostructures combine the QD emission in the visible region, and, concomitantly, the distinctive NIR absorption of Au nanodomains. The possibility of having multiple QDs in a single heterostructure, the SiO2 shell thickness, and the extent of Au deposition onto SiO2 surface have been carefully controlled. The work shows that a single QD entrapped in 16 nm thick SiO2 shell, coated with Au speckles, represents the most suitable geometry to preserve the QD emission in the visible region and to generate NIR absorption from metal NPs. The resulting architectures present a biomedical potential as an effective optical multimodal probes and as promising therapeutic agents due to the Au NP mediated photothermal effect.

Semiquinone oscillations as a tool for investigating the ubiquinone binding to photosynthetic reaction centers.

Semiquinone oscillations induced by light pulses in the presence of exogenous electron donors are a valuable source of information on the kinetics and thermodynamics of ubiquinone chemistry relevant to the QB site of the photosynthetic reaction center (RC). In previous attempts to achieve the quantitative interpretation of data, the ubiquinone concentration was considered constant during the experiment since it was much bigger than that of RC. In this work, we extended existing models to low ubiquinone concentrations revealing several hidden processes taking place during the ubiquinone photoreduction and enabling the evaluation of the ubiquinone binding constant K Q at the QB site. The proposed approach provides for the first time the evaluation of K Q without any preliminary treatment of ubiquinone extraction from the binding site, thereby better preserving its native structure.

Rose Bengal-photosensitized oxidation of 4-thiothymidine in aqueous medium: evidence for the reaction of the nucleoside with singlet state oxygen.

The photoreactivity of 4-thiothymidine (S(4)TdR) under visible light in the presence of Rose Bengal (RB), acting as a photosensitizer, was investigated in aqueous solutions at pH 7 and 12, using UV-vis, FTIR-ATR and (1)H-NMR spectroscopic techniques, time resolved absorption spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Evidence for the generation of thymidine (TdR) as the main product, after one hour of irradiation, was obtained from UV-Vis data, that suggested 4-thiothymidine photodegradation to be faster at basic pH, and confirmed by FTIR-ATR and (1)H-NMR data. Clues for the presence of a further product, likely corresponding to a dimeric form of S(4)TdR, were obtained from the latter techniques. Besides indicating the presence of thymidine, the ESI-MS and MS/MS spectra of the reaction mixtures enabled the identification of the additional product as a S-S bridged covalent dimer of 4-thiothymidine. The concentration of the dimeric species could be estimated with the aid of (1)H-NMR data and was found to be lower than that of thymidine in pH 7 reaction mixtures and almost negligible in the pH 12 ones. From a mechanistic point of view, time-resolved absorption spectroscopy measurements provided direct evidence that the formation of the two products cannot be ascribed to a photoinduced electron transfer involving S(4)TdR and the excited triplet state of RB. Rather, their generation can be interpreted as the result of a bimolecular reaction occurring between singlet state oxygen ((1)O2), photogenerated by RB, and S(4)TdR, as demonstrated by the direct detection of (1)O2 through IR luminescence spectroscopy. More specifically, a sequential reaction pathway, consisting in the generation of an electrophilic hydroxylated form of S(4)TdR and its subsequent, rapid reaction with S(4)TdR, was hypothesized to explain the presence of the S-S bridged covalent dimer of 4-thiothymidine in the reaction mixtures. The described processes make S(4)TdR an interesting candidate in the role of molecular probe for the detection of (1)O2 under different pH conditions.

Photo-thermal effects in gold nanoparticles dispersed in thermotropic nematic liquid crystals.

The last few years have seen a growing interest in the ability of metallic nanoparticles (MNPs) to control temperature at the nanoscale. Under a suitable optical radiation, MNPs feature an enhanced light absorption/scattering, thus turning into an ideal nano-source of heat, remotely controllable by means of light. In this framework, we report our recent efforts on modeling and characterizing the photo-thermal effects observed in gold nanoparticles (GNPs) dispersed in thermotropic Liquid Crystals (LCs). Photo-induced temperature variations in GNPs dispersed in Nematic LCs (NLCs) have been studied by implementing an ad hoc theoretical model based on the thermal heating equation applied to an anisotropic medium. Theoretical predictions have been verified by performing photo-heating experiments on a sample containing a small percentage of GNPs dispersed in NLCs. Both theory and experiments represent an important achievement in understanding the physics of heat transfer at the nanoscale, with applications ranging from photonics to nanomedicine.

Tuning light emission of PbS nanocrystals from infrared to visible range by cation exchange.

Colloidal semiconductor nanocrystals, with intense and sharp-line emission between red and near-infrared spectral regions, are of great interest for optoelectronic and bio-imaging applications. The growth of an inorganic passivation layer on nanocrystal surfaces is a common strategy to improve their chemical and optical stability and their photoluminescence quantum yield. In particular, cation exchange is a suitable approach for shell growth at the expense of the nanocrystal core size. Here, the cation exchange process is used to promote the formation of a CdS passivation layer on the surface of very small PbS nanocrystals (2.3 nm in diameter), blue shifting their optical spectra and yielding luminescent and stable nanostructures emitting in the range of 700-850 nm. Structural, morphological and compositional investigation confirms the nanocrystal size contraction after the cation-exchange process, while the PbS rock-salt crystalline phase is retained. Absorption and photoluminescence spectroscopy demonstrate the growth of a passivation layer with a decrease of the PbS core size, as inferred by the blue-shift of the excitonic peaks. The surface passivation strongly increases the photoluminescence intensity and the excited state lifetime. In addition, the nanocrystals reveal increased stability against oxidation over time. Thanks to their absorption and emission spectral range and the slow recombination dynamics, such highly luminescent nano-objects can find interesting applications in sensitized photovoltaic cells and light-emitting devices.

Photosystem II based multilayers obtained by electrostatic layer-by-layer assembly on quartz substrates.

Photosystem II (PSII) proteins from spinach leaves were immobilized onto quartz substrates according to the Layer-by-Layer (LbL) procedure, alternating protein to polyethylenimine (PEI) layers by exploiting electrostatic interactions. The effects of several factors, such as storage conditions, ageing of the PSII-modified substrates, as well as PSII concentration in buffer, on the quality of the prepared multilayers, were investigated by UV-vis Absorption Spectroscopy and Atomic Force Microscopy (AFM). A number of 13 layers was found to be optimal to guarantee intense PSII optical signals with homogeneous morphological distributions of proteins. The multilayers resulted stable if stored in contact with air at 4 °C, as observed by UV-vis Absorption spectra recorded after 48 h. The best results in terms of AFM images and electron transfer efficiency (measured by Hill Reaction assays) were gained by using 5.6 × 10(-7) M chlorophyll concentration, obtaining multilayers with the most ordered protein distributions and the highest electron transfer efficiency, i.e. 85% of an iso-absorbing PSII suspension. The results highlight the possibility to successfully immobilize PSII proteins, without considerable loss of bioactivity, thanks to the mild nature of the electrostatic LbL technique, opening up possibilities of applications in the bioelectrochemical energy conversion and biosensoristic fields.

Electroactive layer-by-layer plasmonic architectures based on Au nanorods.

Nanostructured films based on Au nanorods (NRs) have been obtained by layer-by-layer (LbL) assembly driven by electrostatic interaction between metal nanoparticles and polyelectrolytes. Multilayer films have been fabricated by using LbL assembly of poly(sodium styrenesulfonate) (PSS) and positively charged Au NRs on a polyelectrolyte-modified substrate. The effect of fabrication parameters, including the nature of the substrate, the polyelectrolyte initial anchoring layer, and the number of layers has been investigated by means of UV-vis absorbance spectroscopy and atomic force microscopy (AFM). The results demonstrated the dependence of morphology and plasmonic features in the multilayered nanostructured architectures from the nature of the anchoring polyelectrolyte on the substrate, the number of layers, and the kind of NR mutual assembly. In addition, a study of the electrochemical activity at the solid/liquid interface has been carried out in order to assess charge transport through the NR multilayer by using two molecular probes in solution, namely, potassium ferricyanide, a common and well-established redox mediator with reversible behavior, and cytochrome C, a robust model redox protein. The presented systematic study of the immobilization of Au NRs opens the venue to several application areas, such as (bio)chemical sensing.

Hybrid assemblies of fluorescent nanocrystals and membrane proteins in liposomes.

Because of the growing potential of nanoparticles in biological and medical applications, tuning and directing their properties toward a high compatibility with the aqueous biological milieu is of remarkable relevance. Moreover, the capability to combine nanocrystals (NCs) with biomolecules, such as proteins, offers great opportunities to design hybrid systems for both nanobiotechnology and biomedical technology. Here we report on the application of the micelle-to-vesicle transition (MVT) method for incorporation of hydrophobic, red-emitting CdSe@ZnS NCs into the bilayer of liposomes. This method enabled the construction of a novel hybrid proteo-NC-liposome containing, as model membrane protein, the photosynthetic reaction center (RC) of Rhodobacter sphaeroides. Electron microscopy confirmed the insertion of NCs within the lipid bilayer without significantly altering the structure of the unilamellar vesicles. The resulting aqueous NC-liposome suspensions showed low turbidity and kept unaltered the wavelengths of absorbance and emission peaks of the native NCs. A relative NC fluorescence quantum yield up to 8% was preserved after their incorporation in liposomes. Interestingly, in proteo-NC-liposomes, RC is not denatured by Cd-based NCs, retaining its structural and functional integrity as shown by absorption spectra and flash-induced charge recombination kinetics. The outlined strategy can be extended in principle to any suitably sized hydrophobic NC with similar surface chemistry and to any integral protein complex. Furthermore, the proposed approach could be used in nanomedicine for the realization of theranostic systems and provides new, interesting perspectives for understanding the interactions between integral membrane proteins and nanoparticles, i.e., in nanotoxicology studies.

The binding of quinone to the photosynthetic reaction centers: kinetics and thermodynamics of reactions occurring at the QB-site in zwitterionic and anionic liposomes.

Liposomes represent a versatile biomimetic environment for studying the interaction between integral membrane proteins and hydrophobic ligands. In this paper, the quinone binding to the QB-site of the photosynthetic reaction centers (RC) from Rhodobacter sphaeroides has been investigated in liposomes prepared with either the zwitterionic phosphatidylcholine (PC) or the negatively charged phosphatidylglycerol (PG) to highlight the role of the different phospholipid polar heads. Quinone binding (K Q) and interquinone electron transfer (L AB) equilibrium constants in the two type of liposomes were obtained by charge recombination reaction of QB-depleted RC in the presence of increasing amounts of ubiquinone-10 over the temperature interval 6-35 °C. The kinetic of the charge recombination reactions has been fitted by numerically solving the ordinary differential equations set associated with a detailed kinetic scheme involving electron transfer reactions coupled with quinone release and uptake. The entire set of traces at each temperature was accurately fitted using the sole quinone release constants (both in a neutral and a charge separated state) as adjustable parameters. The temperature dependence of the quinone exchange rate at the QB-site was, hence, obtained. It was found that the quinone exchange regime was always fast for PC while it switched from slow to fast in PG as the temperature rose above 20 °C. A new method was introduced in this paper for the evaluation of constant K Q using the area underneath the charge recombination traces as the indicator of the amount of quinone bound to the QB-site.

Selective confinement of oleylamine capped Au nanoparticles in self-assembled PS-b-PEO diblock copolymer templates.

Amphiphilic polystyrene-block-polyethylene oxide (PS-b-PEO) block copolymers (BCPs) have been demonstrated to be effective in directing organization of colloidal Au nanoparticles (NPs). Au NPs have been incorporated into the polymer and the different chemical affinity between the NP surface and the two blocks of the BCP has been used as a driving force of the assembling procedure. The morphology of the nanocomposites, prepared and fabricated as thin films, has been investigated by means of atomic force and scanning electron microscopies as a function of the NP content and BCP molecular weight. NPs have been effectively dispersed in PS-b-PEO hosts at any investigated content (up to 17 wt%) and a clear effect of the BCP properties on the final nanocomposite morphology has been highlighted. Finally, electrostatic force microscopy has demonstrated the conductive properties of the nanocomposite films, showing that the embedded Au NPs effectively convey their conductive properties to the film. The overall investigation has confirmed the selective confinement of the as-prepared surfactant-coated metal NPs in the PS block of PS-b-PEO, thus proposing a very simple and prompt assembling tool for nanopatterning, potentially suitable for optoelectronic, sensing and catalysis applications.

The lipidome of the photosynthetic bacterium Rhodobacter sphaeroides R26 is affected by cobalt and chromate ions stress.

A detailed characterization of membrane lipids of the photosynthetic bacterium Rhodobacter (R.) sphaeroides was accomplished by thin-layer chromatography coupled with matrix-assisted laser desorption ionization mass spectrometry. Such an approach allowed the identification of the main membrane lipids belonging to different classes, namely cardiolipins (CLs), phosphatidylethanolamines, phosphatidylglycerols (PGs), phosphatidylcholines, and sulfoquinovosyldiacylglycerols (SQDGs). Thus, the lipidomic profile of R. sphaeroides R26 grown in abiotic stressed conditions by exposure to bivalent cobalt cation and chromate oxyanion, was investigated. Compared to bacteria grown under control conditions, significant lipid alterations take place under both stress conditions; cobalt exposure stress results in the relative content increase of CLs and SQDGs, most likely compensating the decrease in PGs content, whereas chromate stress conditions result in the relative content decrease of both PGs and SQDGs, leaving CLs unaltered. For the first time, the response of R. sphaeroides to heavy metals as Co(2+) and CrO4 (2-) is reported and changes in membrane lipid profiles were rationalised.