Synthesis of orthogonally assembled 3D cross-stacked metal oxide semiconducting nanowires.

Assemblies of metal oxide nanowires in 3D stacks can enable the realization of nanodevices with tailored conductivity, porous structure and a high surface area. Current fabrication methods require complicated multistep procedures that involve the initial preparation of nanowires followed by manual assembly or transfer printing, and thus lack synthesis flexibility and controllability. Here we report a general synthetic orthogonal assembly approach to controllably construct 3D multilayer-crossed metal oxide nanowire arrays. Taking tungsten oxide semiconducting nanowires as an example, we show the spontaneous orthogonal packing of composite nanorods of poly(ethylene oxide)-block-polystyrene and silicotungstic acid; the following calcination gives rise to 3D cross-stacked nanowire arrays of Si-doped metastable ε-phase WO3. This nanowire stack framework was also tested as a gas detector for the selective sensing of acetone. By using other polyoxometallates, this fabrication method for woodpile-like 3D nanostructures can also be generalized to different doped metal oxide nanowires, which provides a way to manipulate their physical properties for various applications.

Highly Selective Recovery of Lanthanides by Using a Layered Vanadate with Acid and Radiation Resistance.

It is of vital importance to capture lanthanides (nuclear fission products) from waste solutions for radionuclide remediation owing to their hazards. The effective separation of lanthanides are achieved by an acid/base-stable and radiation-resistant vanadate, namely, [Me2 NH2 ]V3 O7 (1). It exhibits high adsorption capacities for lanthanides (qm Eu =161.4 mg g-1 ; qm Sm =139.2 mg g-1 ). And high adsorption capacities are maintained over a pH range of 2.0-6.9 (qm Eu =75.1 mg g-1 at low pH of 2.5). It displays high selectivity for Eu3+ (simulant of An3+ ) against a large excess of interfering ions. It can efficiently separate Eu3+ and Cs+ (or Sr2+ ) with the highest separation factor SFEu/Cs of 156 (SFEu/Sr of 134) to date. The adsorption mechanism is revealed by calculations and XPS, EXAFS, Raman, and elemental analyses. These merits combined with facile synthesis and convenient elution makes the title vanadate a promising lanthanide scavenger for environmental remediation.

Efficient elimination of Cr(VI) from aqueous solutions using sodium dodecyl sulfate intercalated molybdenum disulfide.

In recent years, the heavy metal ions have been immoderately released into the ecological system and result in potential hazardous to public health. Herein, the sodium dodecyl sulfate intercalated molybdenum disulfide (SDS-MoS2) was synthesized for the adsorption of Cr(VI). The SDS molecule was flat and vertically intercalated into the interlayer of MoS2, which was further evidenced by density functional theory calculations. The capture of Cr(VI) on the sphere-like SDS-MoS2 relied on solution pH. The retention of Cr(VI) on SDS-MoS2 attained 63.92 mg/g, and the removal process was endothermic, spontaneous and increased with temperature increasing. The main removal mechanism of Cr(VI) onto SDS-MoS2 was Cr(VI) fixing on the surface of the composites by chemisorption involving possible Cr-S coordination bonding. More importantly, Cr(VI) passed into the increased interlamination and reacted at the interlamination of SDS-MoS2, which was further proved at molecular level. The results can provide critical information for the application of SDS-MoS2 in Cr(VI) elimination or other kinds of pollutants removal in natural aquatic environment.

Excited-State Decay Pathways of Flavin Molecules in Five Redox Forms: The Role of Conical Intersections.

Flavin molecules play an important role in light-driven biological activities. They have drawn significant interest for decades because of their rich photochemistry. In addition to the well-explored FADH- (anionic hydroquinone), which is supposed to be the only catalytic active state to repair DNA lesions, other four flavin molecules (i.e., FAD, FAD·-, FADH·, and FADH2) in three redox forms combined the redox cycle of flavins. Although extensive studies have been carried out for steady-state spectroscopic properties of five redox flavins in various proteins and solutions, the photochemistry and photophysical properties of those different redox states significantly complicate the corresponding theoretical studies. In present work, we employed the ab initio wave function based CASSCF method to systematically investigate the excited state decay pathways of flavins in five redox forms through two approaches. First, the comparison of the absorption and emission spectra from both theoretical calculation and experiment allows a detailed mapping of the transition properties of different redox states in flavins. Second, we identified four kinds of conical intersections (CIs) for five different redox states as the possible deactivation mechanisms responsible for internal conversion or intersystem crossing from the initially populated excited state. The theoretical calculations provide atomic details for the photochemical and photophysical properties of flavins on photoinduced processes. Our findings highlight the indispensable effects of CIs in the excited state decay of flavin molecules and thereby provide basic theoretical information for light-driven biological activities.

Macroscopic, Spectroscopic, and Theoretical Investigation for the Interaction of Phenol and Naphthol on Reduced Graphene Oxide.

Interaction of phenol and naphthol with reduced graphene oxide (rGO), and their competitive behavior on rGO were examined by batch experiments, spectroscopic analysis and theoretical calculations. The batch sorption showed that the removal percentage of phenol or naphthol on rGO in bisolute systems was significantly lower than those of phenol or naphthol in single-solute systems. However, the overall sorption capacity of rGO in bisolute system was higher than single-solute system, indicating that the rGO was a very suitable material for the simultaneous elimination of organic pollutants from aqueous solutions. The interaction mechanism was mainly π-π interactions and hydrogen bonds, which was evidenced by FTIR, Raman and theoretical calculation. FTIR and Raman showed that a blue shift of C═C and -OH stretching modes and the enhanced intensity ratios of ID/IG after phenols sorption. The theoretical calculation indicated that the total hydrogen bond numbers, diffusion constant and solvent accessible surface area of naphthol were higher than those of phenol, indicating higher sorption affinity of rGO for naphthol as compared to phenol. These findings were valuable for elucidating the interaction mechanisms between phenols and graphene-based materials, and provided an essential start in simultaneous removal of organics from wastewater.

Coagulation Behavior of Graphene Oxide on Nanocrystallined Mg/Al Layered Double Hydroxides: Batch Experimental and Theoretical Calculation Study.

Graphene oxide (GO) has attracted considerable attention because of its remarkable enhanced adsorption and multifunctional properties. However, the toxic properties of GO nanosheets released into the environment could lead to the instability of biological system. In aqueous phase, GO may interact with fine mineral particles, such as chloridion intercalated nanocrystallined Mg/Al layered double hydroxides (LDH-Cl) and nanocrystallined Mg/Al LDHs (LDH-CO3), which are considered as coagulant molecules for the coagulation and removal of GO from aqueous solutions. Herein the coagulation of GO on LDHs were studied as a function of solution pH, ionic strength, contact time, temperature and coagulant concentration. The presence of LDH-Cl and LDH-CO3 improved the coagulation of GO in solution efficiently, which was mainly attributed to the surface oxygen-containing functional groups of LDH-Cl and LDH-CO3 occupying the binding sites of GO. The coagulation of GO by LDH-Cl and LDH-CO3 was strongly dependent on pH and ionic strength. Results of theoretical DFT calculations indicated that the coagulation of GO on LDHs was energetically favored by electrostatic interactions and hydrogen bonds, which was further evidenced by FTIR and XPS analysis. By integrating the experimental results, it was clear that LDH-Cl could be potentially used as a cost-effective coagulant for the elimination of GO from aqueous solutions, which could efficiently decrease the potential toxicity of GO in the natural environment.

Adsorption of 4-n-Nonylphenol and Bisphenol-A on Magnetic Reduced Graphene Oxides: A Combined Experimental and Theoretical Studies.

Adsorption of 4-n-nonylphenol (4-n-NP) and bisphenol A (BPA) on magnetic reduced graphene oxides (rGOs) as a function of contact time, pH, ionic strength and humic acid were investigated by batch techniques. Adsorption of 4-n-NP and BPA were independent of pH at 3.0- 8.0, whereas the slightly decreased adsorption was observed at pH 8.0-11.0. Adsorption kinetics and isotherms of 4-n-NP and BPA on magnetic rGOs can be satisfactorily fitted by pseudo-second-order kinetic and Freundlich model, respectively. The maximum adsorption capacities of magnetic rGOs at pH 6.5 and 293 K were 63.96 and 48.74 mg/g for 4-n-NP and BPA, respectively, which were significantly higher than that of activated carbon. Based on theoretical calculations, the higher adsorption energy of rGOs + 4-n-NP was mainly due to π-π stacking and flexible long alkyl chain of 4-n-NP, whereas adsorption of BPA on rGOs was energetically favored by a lying-down configuration due to π-π stacking and dispersion forces, which was further demonstrated by FTIR analysis. These findings indicate that magnetic rGOs is a promising adsorbent for the efficient elimination of 4-n-NP/BPA from aqueous solutions due to its excellent adsorption performance and simple magnetic separation, which are of great significance for the remediation of endocrine-disrupting chemicals in environmental cleanup.

Direct determination of resonance energy transfer in photolyase: structural alignment for the functional state.

Photoantenna is essential to energy transduction in photoinduced biological machinery. A photoenzyme, photolyase, has a light-harvesting pigment of methenyltetrahydrofolate (MTHF) that transfers its excitation energy to the catalytic flavin cofactor FADH¯ to enhance DNA-repair efficiency. Here we report our systematic characterization and direct determination of the ultrafast dynamics of resonance energy transfer from excited MTHF to three flavin redox states in E. coli photolyase by capturing the intermediates formed through the energy transfer and thus excluding the electron-transfer quenching pathway. We observed 170 ps for excitation energy transferring to the fully reduced hydroquinone FADH¯, 20 ps to the fully oxidized FAD, and 18 ps to the neutral semiquinone FADH(•), and the corresponding orientation factors (κ(2)) were determined to be 2.84, 1.53 and 1.26, respectively, perfectly matching with our calculated theoretical values. Thus, under physiological conditions and over the course of evolution, photolyase has adopted the optimized orientation of its photopigment to efficiently convert solar energy for repair of damaged DNA.

Alkyl modified cationic COFs for preferential trapping of charge dispersed perrhenate: Synergistic hydrophobicity and anion-recognition effects.

Charge dispersed oxoanionic pollutants (such as TcO4- and ReO4-) with low hydrophilicity are typically difficult to be preferentially extracted. Recently, cationic covalent organic frameworks (COFs) have received considerable attention for anions trapping. Two cationic COFs, denoted as Tp-S and Tp-D, were synthesized by incorporating ethyl and cyclic alkylated diquats into 2,2'-bipyridine-based COF. A synergistic effect of hydrophobic channel and anion-recognition sites were achieved by branched chains, which effectively surmounted the Hofmeister bias. Both Tp-S and Tp-D exhibited raising removal performance for surrogate ReO4- at high acidity with adsorption capacities of 435.6 and 291.4 mg g-1, respectively. Obvious variations caused by side chains were displayed in microstructures and adsorption performance. Specially, compared with Tp-D, Tp-S demonstrated desirable priority in uptake capacity and selectivity. In a real-scenario experiment, Tp-S could remove 72.8 % of ReO4- in a simulated Hanford LAW stream, which was attributed to the spatial effects and charge distribution arising from the open and flexible side chains of Tp-S. Otherwise, the rigid cyclic chains endowed pyridine-base Tp-D material an unprecedented alkaline stability. Spectra and theoretical calculations revealed a mechanism of preferential capture based on electrostatic interaction and hydrogen bonding between charge dispersed ReO4-/TcO4- and Tp-S/Tp-D. This work provides an innovative perspective to tailored materials for the treatment of oxoanionic contaminants.

New insight into the mechanism of biofouling-resistant thiazole-linked covalent organic frameworks for selective uranium capture from seawater.

The extraction of uranium from seawater is crucial for the sustainable production of nuclear fuel. Traditional amidoxime-functionalized adsorbents suffer from competitive adsorption of vanadium ion and biofouling. These challenges motivate the development of novel adsorbents for selective uranium extraction from seawater. Herein, four kinds of thiazole-linked covalent organic frameworks (COFs) were investigated to harvest uranium from seawater. The selectivity and anti-biofouling performance were systematically investigated through the molecular dynamics (MD) simulations. Driven by the pore size sieving effect and electrostatic interaction, the Ca2UO2(CO3)3 complex and vanadate anions were selectively separated by different COFs in special areas. On one hand, benefits from the small steric partition factor, the Ca2UO2(CO3)3 complex can stick on the surface of COFs. On the other hand, the dispersive negatively and positively charged areas of studied COFs work as potential binding sites for the Ca2UO2(CO3)3 complex and vanadate anions, respectively. Moreover, an analysis of pulling force and desorption time between uranium and vanadium ions further confirmed the selectivity of various thiazole-linked COFs. The anti-biofouling property was comparatively investigated by dynamic trajectory and solvent accessible surface area. Our outcomes illustrate that the hydroxyl and zwitterionic groups in the thiazole-linked COFs endow their strong surface hydrations to resist marine biofouling. In particular, the TpBdsaPa is identified as a promising candidate due to charge dispersed zwitterionic group as well as remarkable anti-biofouling ability. The present study sheds an atomic-level understanding of the thiazole-linked COFs for selective uranium uptaking from seawater, which will provide aid to design novel adsorbent with highly selective uranium extraction capacity and strong anti-biofouling property.

Theoretical studies on the isomerization mechanism of the ortho-green fluorescent protein chromophore.

We present a systematic theoretical investigation on the overall ground state and excited-state isomerization reaction mechanism of ortho-green fluorescent protein chromophore (o-HBDI) using the density functional theory and the multireference methods. The calculated results and subsequent analysis suggest the possible isomerization mechanism for o-HBDI. By comparison with experimental observation and detailed analysis, it is concluded that as initiated by the excited-state intramolecular proton transfer reaction, the conical intersection between the ground state and the excited state along the C4-C5 single-bond rotational coordinate is responsible for the rapid deactivation of o-HBDI.

X-ray spectroscopy of blocked alanine in water solution from supermolecular and supermolecular-continuum solvation models: a first-principles study.

The N1s near-edge X-ray absorption fine structure (NEXAFS) and X-ray emission spectra (XES) of blocked alanine in water solution have been investigated at the first-principles level based on cluster models constructed from classical molecular dynamics simulations. The bulk solvent has been described by both supermolecular and combined supermolecular-continuum models. With the former model we show that NEXAFS spectra convergent with respect to system size require at least the inclusion of the second solvation shell and that averaged spectra over several hundreds of snapshots can well represent the statistical effect of different instantaneous configurations of the solvation shells. With the combined model we demonstrate that calculations of a medium-sized peptide-water supermolecule qualitatively predict the NEXAFS spectrum of the solvated peptide even considering a single geometry. Furthermore, sampling over hundreds of snapshots by the combined model, the explicit inclusion of even a few waters yields an averaged spectrum in good quantitative agreement with the discrete model results. In comparison, the XES spectra show little dependence on the structures of either the solvent shell or the peptide itself. The ramifications of these findings are discussed.

Chelating effect between uranyl and pyridine N containing covalent organic frameworks: A combined experimental and DFT approach.

Covalent organic frameworks (COFs) are promising adsorbents for removing heavy metal ions, and have high crystallinity, a porous structure, and conjugated stability. N-containing functional groups are known to have great affinity for uranyl ions. In this work, to explore the peculiarity of the pyridine N structure as an efficient adsorbent, we chose 2,2'-dipyridine-5,5'-diamine (Bpy) and pyridine-2,5'-diamine (Py) as the core skeletons, and 1,3,5-triformylphloroglucinol (Tp) as the linker to synthesize two crystalline and stable N-containing COFs named TpBpy and TpPy, respectively, through a facile solvothermal method. Characterization results demonstrated that TpBpy and TpPy possessed regularly growing pore sizes, large specific surface areas and relatively strong thermal resistances. The results of batch experiments showed that both COF materials were capable of the effective removal of uranyl with uptake capacities of 115.45 mg g-1 and 291.79 mg g-1, respectively. In addition, density functional theory (DFT) simulations highlighted the beneficial chelation effect of the double N structure in pyridine monomers for removing uranyl ions. Combining systematic experimental and theoretical analyses, the adsorption process and interaction mode of porous COFs and UO22+ were revealed, to provide predictable support for the application of pyridine N-containing COFs in the field of environmental remediation.

A mussel-pearl side chain interaction in mercury(II) and phenol removal by sulfur-functionalized covalent organic frameworks: A DFT study.

The covalent organic framework materials (COFs) with excellent chemical and physical characteristics have been rapidly developed as adsorbents in the application of environmental remediation. In the design of COFs, the selection of functional groups and side chains is of great significance. Herein, density function theory (DFT) method is used to illustrate the adsorption behavior and mechanism of three sulfur-functionalized COFs (S-COFs) for the adsorption of mercury(II) and phenol. According to the analysis of geometric configurations and electronic properties, it demonstrated that the side chains of S-COFs with high flexibility and concentrated sulfur-functional groups, acting like a closed mussel which tightly confined the contaminants, the highest adsorption was -24.32 kcal/mol. The adsorption mechanism of phenol and mercury(II) on S-COFs was elucidated. For phenol, hydrogen bonds and π-π stacking interaction played an important role in the adsorption process, while the coordination interaction was dominated for the adsorption of mercury(II). This research explains the importance of selecting appropriate functional groups and side chains for COFs in the removal of contaminants in the molecular scale, and reveals the great potential of COFs in environmental remediation applications.

Methyl position affect the fluorescence performance of HBT derivatives for the detection of hypochlorite under alkaline condition.

Five fluorescent derivatives of hydroxyphenyl-benzothiazole (HBT) with different methyl positions at the hydroxyphenyl group were synthesized with good yield. Their reactivity and fluorescent response to hypochlorite were carefully studied. It was found that the HBT derivatives with meta-methyl (3-HBT or 5-HBT) showed the highest reactivity to hypochlorite under basic conditions, accompanied by the most efficient fluorescence quenching, whereas HBT derivatives with ortho or para methyl exhibited the least reactivity to hypochlorite. The LUMO and HOMO of 3-HBT were further verified to explain the fluorescence behavior by density functional theory (DFT) calculation. The excellent selectivity of 3-HBT toward hypochlorite against other reactive oxygen species (ROS) was also evaluated under the same conditions. The compounds emit bright green fluorescence in a solid-state, which is convenient for designing sensing devices for hypochlorite in water samples. Thus, the HBT derivatives with meta methyl (3-HBT) were successfully applied to fabricate paper sensors for the quantification of hypochlorite in tap water. Hence, the fluorescent 3-HBT exhibits great promise as a selective and sensitive hypochlorite probe in chemical and biological applications.

Photorotamerization of matrix-isolated acrylic acid revisited.

In this study, the conformational preferences and photochemistry of acrylic acid (AA, CH(2)=CHCOOH) monomer isolated in cryogenic argon and krypton matrices were interpreted, based on results of quantum chemical calculations. Natural bond orbital analysis allowed to shed light on the main electronic effects determining the relative stability of the conformers of the molecule in the ground electronic state. The conformational isomerization taking place upon UV-irradiation of the matrix-isolated compound (λ ∼ 243 nm) was explained, based on theoretical complete active space self-consistent field/complete active space with second order perturbation theory (CASSCF/CASPT2) and time-dependent density functional theory (TD-DFT) results, allowing to rationalize the nearly equal populations of the two lowest energy conformers of the molecule observed in the photostationary state. Besides, details of the infrared spectra of the compound were reinterpreted based on the calculated spectra for the two most stable conformers of the molecule. In particular, the assignments for the out-of-plane A" symmetry vibrations were revised.

Extremely stable amidoxime functionalized covalent organic frameworks for uranium extraction from seawater with high efficiency and selectivity.

Uranium extraction from seawater is of strategic significance for nuclear power generation. Amidoxime-based functional adsorbents play indispensable roles in the recovery of seawater uranium with high efficiency. Nevertheless, balancing the adsorption capacity and selectivity is challenging in the presence of complicated interfering ions especially vanadium. Herein, a polyarylether-based covalent organic framework functionalized with open-chain amidoxime (COF-HHTF-AO) was synthesized with remarkable chemical stability and excellent crystallinity. Impressively, the adsorption capacity of COF-HHTF-AO towards uranium in natural seawater reached up to 5.12 mg/g, which is 1.61 times higher than that for vanadium. Detailed computational calculations revealed that the higher selectivity for uranium over vanadium originated from the specific bonding nature and coordination pattern with amidoxime. Combining enhanced adsorption capacity, excellent selectivity and ultrahigh stability, COF-HHTF-AO serves as a promising adsorbent for uranium extraction from the natural seawater.

Conical intersection is responsible for the fluorescence disappearance below 365 nm in cyclopropanone.

The photodissociation dynamics of cyclopropanone was explored with the complete active space self-consistent field (CASSCF) calculations and ab initio nonadiabatic molecular dynamics simulations. The related minima, transition state (TS) and minimum-energy conical intersections (MECIs) were obtained as well as energetics. In the static CASSCF calculations, one MECI was found to be responsible for the fluorescence disappearance below 365 nm because the ultrafast internal conversion (IC) via this MECI deprived the opportunity of the fluorescence emission. Further evidence of this ultrafast IC event came from the subsequent ab initio nonadiabatic molecular dynamics simulations.

Nonadiabatic histidine dissociation of hexacoordinate heme in neuroglobin protein.

In the present work, density functional theory and canonical nonadiabatic Monte Carlo transition state theory have been used to investigate the histidine dissociation process from hexacoordinate heme in Ngb protein. The potential energy surfaces (PES) of the lowest singlet, triplet, and quintet states are calculated by stepwise optimization along with the histidine dissociation pathway. Based on the calculated two-dimensional PES, the histidine dissociation rates for the spin-forbidden processes via singlet to triplet and singlet to quintet transitions have been calculated by the nonadiabatic Monte Carlo transition state theory in canonical ensemble. The present study provides a quantitative description on spin-forbidden histidine dissociation processes.

Ultrafast deactivation processes in the 2-aminopyridine dimer and the adenine-thymine base pair: similarities and differences.

2-Aminopyridine dimer has frequently been used as a model system for studying photochemistry of DNA base pairs. We examine here the relevance of 2-aminopyridine dimer for a Watson-Crick adenine-thymine base pair by studying UV-light induced photodynamics along two main hydrogen bridges after the excitation to the localized (1)pi pi(*) excited-state. The respective two-dimensional potential-energy surfaces have been determined by time-dependent density functional theory with Coulomb-attenuated hybrid exchange-correlation functional (CAM-B3LYP). Different mechanistic aspects of the deactivation pathway have been analyzed and compared in detail for both systems, while the related reaction rates have also be obtained from Monte Carlo kinetic simulations. The limitations of the 2-aminopyridine dimer as a model system for the adenine-thymine base pair are discussed.