Effect of khat extract on color stability of digitally and manually fabricated provisional restorations: an in vitro comparative study.

BACKGROUND: The aim of this in vitro study was to evaluate the effect of khat extract on the color stability of five different provisional restorative materials (PRMs). METHODS: In this study, 50 specimens were fabricated from five different PRMs with different techniques. Twenty specimens were digitally fabricated of poly-methyl methacrylate (PMMA) CAD/CAM milling and 3D printing PRMs, while the other thirty specimens were manually fabricated of three different PRMs: PMMA self-cured (SC) acrylic resin, light-cured (LC) composite, and Bis-acrylic SC composite. Milling and 3D printing machines were used to fabricate the digital specimens, while the manual specimens were fabricated using a metallic mold. The material was placed in the mold, covered by a polyester stripe, and held between two glass slabs with a constant load for 30 s. After setting, the specimens were removed and checked. Ten disc-shaped specimens with 2 ± 0.3 mm thickness and 10 ± 0.3 mm diameter were prepared from each of the tested PRM. Then all the specimens were polished. Five specimens of each PRM were immersed in khat extract, while the other five were immersed in distilled water medium as a control group. The color measurements were recorded before and after 1 and 7 days of immersion using a spectrophotometer. The immersion media were renewed every 24 h and kept along with the specimens at 37 °C. The T test, paired T test, and ANOVA analysis of variance were used to analyze the results. The Bonferroni test was used for post-hoc multiple comparisons. RESULTS: The interaction between the tested PRMs, the media, and the duration of immersion time was statistically significant (p < 0.05). PMMA CAD/CAM milling PRM was the most stable in color, and this was statistically significant (p < 0.05). The LC composite PRM composite was the least stable in color and was statistically insignificant (p > 0.05) when compared to the 3D printing and Bis-acrylic SC composite PRMs, respectively. CONCLUSIONS: This study demonstrated that khat extract medium has a high staining ability on the tested PRMs. CAD/CAM milling PRM was the most stable in color and could therefore be used as a long-term provisional. The increase in immersion time was a significant factor in the color change of the tested PRMs. The color of the 3D-printed PRM was the most affected over time.

Evaluation of the quality of fixed prosthesis impressions in private laboratories in a sample from Yemen.

BACKGROUND: Fixed prosthodontics require an accurate impression for the teeth and the area to be restored for the laboratory to fabricate the desired restoration without mistakes. This study evaluated the quality of impressions received by private laboratories for the fabrication of fixed prosthesis by describing the frequency of clinically detectable errors and by analyzing association between the various factors involved. METHODS: 165 impressions were collected from four dental laboratories. Jaw involved, type of tray, size of tray, number of prepared units, type of impression materials, techniques and viscosity in case of elastomeric impressions and type of prosthesis requested were recorded. Data referring to errors and visible defects including errors in finish line, in preparation area, in silicone impression technique and blood in impression were also documented. Factors affecting errors present were also assessed. Association between dentist gender and experience years and impression errors was assessed. Chi square and Fisher exact tests used to examine the association between categorical variables and outcomes. RESULTS: The total of error considering not immediately pouring as an error. Alginate was the most impression used. of impressions evaluated (50.9%), 97% were have at least one visible error; 92.1% had errors in finish line, 53.9% had errors in preparation area and (72.8%) of elastomeric impressions were have at least one error in technique. Blood in impression was detected in 52.1% of impressions. Significant association was found between material type and errors in finishing line and preparation area. Significant relationships were found between gender and errors in silicone impression technique (p < 0.05). CONCLUSION: Within the limitations of this study, high frequency of detectable errors was found in fixed prosthesis impressions received by private dental laboratories. This high frequency is of serious concern, as this will result in poor fitted fixed prosthesis provided to patients.

Evaluation of Radiant Power of the Light Curing Units Used in Clinics at Governmental and Privates Dental Faculties.

Background:  To evaluate the radiant power of the light cure units (LCUs) in relation to their type, radiant exitance, number of years in clinical use, and condition of LCUs tips in governmental and public clinics in Dental Faculties in Sana'a City. Materials and Methods: LCUs were collected from different colleges at Sanaa City, Yemen, then LCU data as type, clinical age (<1 year, between 1-5 and ˃ 5-years), tip condition was visually inspected for damage and adhering debris, and the radiant exitance values of the tested LCUs. Radiant exitance values were subcategorized into three groups: <400, 400-850, and >850 mW/cm², labeled as inadequate, marginal, and adequate radiant exitances, respectively. A Woodpecker radiometer was used with a mode lasting of 20 seconds was used with each LCU. Descriptive statistics of the different parameters were evaluated with SPSS version 25. One-way ANOVA and Mann-Whitney tests were performed to determine the mean difference between the groups with a significance value of ˂ 0.05 was considered. Results: Two hundred twenty-three LCUs were surveyed, and the majority were Light-emitting diode (LED). Forty-nine (21.9%), 117 (52.4%), 57 (25.6%) recorded lesser than, 400-850, and more than 850 mW/cm², respectively. Radiant exitances of < year-old units were found to be higher than those of units used for ˃ 5 years with significant differences (p=0.001). The ANOVA test showed significant differences between the radiant exitance with clinical age and LCU tip conditions and a strong correlation p ˃ 0.050. Conclusion: LED curing lights were the most used in the tested Dental Faculties. More than half of the used LCU offered sufficient radiant exitance. Clinical age, the presence or absence of composite buildups, and damage to curing tips showed significantly affect radiant exitance values.

3D FEA of cemented glass fiber and cast posts with various dental cements in a maxillary central incisor.

This study aimed to analyse and compare the stability of two dental posts cemented with four different luting agents by examining their shear stress transfer through the FEM. Eight three-dimensional finite element models of a maxillary central incisor restored with glass fiber and Ni-Cr alloy cast dental posts. Each dental post was luted with zinc phosphate, Panavia resin, super bond C&B resin and glass ionomer materials. Finite element models were constructed and oblique loading of 100 N was applied. The distribution of shear stress was investigated at posts and cement/dentine interfaces using ABAQUS/CAE software. The peak shear stress for glass fiber post models minimized approximately three to four times of those for Ni-Cr alloy cast post models. There was negligible difference in peak of shear stress when various cements were compared, irrespective of post materials. The shear stress had same trend for all cement materials. This study found that the glass fiber dental post reduced the shear stress concentration at interfacial of post and cement/dentine compared to Ni-Cr alloy cast dental post.