Facile adipocyte uptake and liver/adipose tissue delivery of conjugated linoleic acid-loaded tocol nanocarriers for a synergistic anti-adipogenesis effect.

Obesity is a major risk to human health. Adipogenesis is blocked by α-tocopherol and conjugated linoleic acid (CLA). However, their effect at preventing obesity is uncertain. The effectiveness of the bioactive agents is associated with their delivery method. Herein, we designed CLA-loaded tocol nanostructured lipid carriers (NLCs) for enhancing the anti-adipogenic activity of α-tocopherol and CLA. Adipogenesis inhibition by the nanocarriers was examined using an in vitro adipocyte model and an in vivo rat model fed a high fat diet (HFD). The targeting of the tocol NLCs into adipocytes and adipose tissues were also investigated. A synergistic anti-adipogenesis effect was observed for the combination of free α-tocopherol and CLA. Nanoparticles with different amounts of solid lipid were developed with an average size of 121‒151 nm. The NLCs with the smallest size (121 nm) showed greater adipocyte internalization and differentiation prevention than the larger size. The small-sized NLCs promoted CLA delivery into adipocytes by 5.5-fold as compared to free control. The nanocarriers reduced fat accumulation in adipocytes by counteracting the expression of the adipogenic transcription factors peroxisome proliferator activated receptor (PPAR)γ and CCAAT/enhancer-binding protein (C/EBP)α, and lipogenic enzymes acetyl-CoA carboxylase (ACC) and fatty acid synthase (FAS). Localized administration of CLA-loaded tocol NLCs significantly reduced body weight, total cholesterol, and liver damage indicators in obese rats. The biodistribution study demonstrated that the nanoparticles mainly accumulated in liver and adipose tissues. The NLCs decreased adipocyte hypertrophy and cytokine overexpression in the groin and epididymis to a greater degree than the combination of free α-tocopherol and CLA. In conclusion, the lipid-based nanocarriers were verified to inhibit adipogenesis in an efficient and safe way.

Nanoencapsulation of Tea Catechins for Enhancing Skin Absorption and Therapeutic Efficacy.

Tea catechins are a group of flavonoids that show many bioactivities. Catechins have been extensively reported as a potential treatment for skin disorders, including skin cancers, acne, photoaging, cutaneous wounds, scars, alopecia, psoriasis, atopic dermatitis, and microbial infection. In particular, there has been an increasing interest in the discovery of cosmetic applications using catechins as the active ingredient because of their antioxidant and anti-aging activities. However, active molecules with limited lipophilicity have difficulty penetrating the skin barrier, resulting in low bioavailability. Nevertheless, topical application is a convenient method for delivering catechins into the skin. Nanomedicine offers an opportunity to improve the delivery efficiency of tea catechins and related compounds. The advantages of catechin-loaded nanocarriers for topical application include high catechin loading efficiency, sustained or prolonged release, increased catechin stability, improved bioavailability, and enhanced accumulation or targeting to the nidus. Further, various types of nanoparticles, including liposomes, niosomes, micelles, lipid-based nanoparticles, polymeric nanoparticles, liquid crystalline nanoparticles, and nanocrystals, have been employed for topical catechin delivery. These nanoparticles can improve catechin permeation via close skin contact, increased skin hydration, skin structure disorganization, and follicular uptake. In this review, we describe the catechin skin delivery approaches based on nanomedicine for treating skin disorders. We also provide an in-depth description of how nanoparticles effectively improve the skin absorption of tea catechins and related compounds, such as caffeine. Furthermore, we summarize the possible future applications and the limitations of nanocarriers for topical delivery at the end of this review article.

COVID 19 pandemic challenges and their management: A review of medicines, vaccines, patents and clinical trials with emphasis on psychological health issues.

The SARS-CoV-2 (COVID 19) paroxysm is a dominant health exigency that caused significant distress, affecting physical and mental health. Increased mortality, a stressed healthcare system, financial crisis, isolation, and new living and working styles enhanced societal commiseration leading to poor health outcomes. Though people try to maintain good physical health but unfortunately the mental affliction is still ignored. Poor psychological health has emerged as a burgeoning social issue and demands attention. Henceforth, the fundamental objective of this review article is to collate information about COVID-linked physical and psychological agony in diverse population groups with related symptoms and accessible diagnosis techniques. Recent studies have unraveled the fragile mental states of people who have either contracted COVID 19 or had near and dear ones falling prey to it. The impact of the epidemic on the human mind both in short and long-term, with possible risk and preventive factors together with suggested solutions for maintaining good health have also been discussed here. It also enlists the available medications, vaccines and investigational research in the form of patents and clinical trials. This article can be taken as an updated information sheet for COVID 19, accompanied by its management techniques with special emphasis on coping strategies for mental health. Further, it may also assist the policymakers to devise approaches that could enable the public to overcome the pandemic-driven adversity not only in the given situation but also futuristically.

Multifunctional lipid-based nanocarriers with antibacterial and anti-inflammatory activities for treating MRSA bacteremia in mice.

BACKGROUND: Bacteremia-induced sepsis is a leading cause of mortality in intensive care units. To control a bacterial infection, an immune response is required, but this response might contribute to organ failure. Kidneys are one of the main organs affected by bacteremia. Combination therapies with antibacterial and anti-inflammatory effects may be beneficial in treating bacteremia. This study aimed to develop nanostructured lipid carriers (NLCs) loaded with ciprofloxacin and rolipram that exert a combination of anti-methicillin-resistant Staphylococcus aureus (MRSA) and anti-inflammatory effects. Retinol was incorporated into the nanoparticles to transport retinol-binding protein 4 (RBP4) to the kidneys, which abundantly express RBP receptors. The NLCs were fabricated by high-shear homogenization and sonication, and neutrophils were used as a model to assess their anti-inflammatory effects. Mice were injected with MRSA to establish a model of bacteremia with organ injury. RESULTS: The mean nanoparticle size and zeta potential of the NLCs were 171 nm and - 39 mV, respectively. Ciprofloxacin (0.05%, w/v) and rolipram (0.02%) achieved encapsulation percentages of 88% and 96%, respectively, in the nanosystems. The minimum bactericidal concentration of free ciprofloxacin against MRSA increased from 1.95 to 15.63 µg/ml when combined with rolipram, indicating a possible drug-drug interaction that reduced the antibacterial effect. Nanoparticle inclusion promoted the anti-MRSA activity of ciprofloxacin according to time-kill curves. The NLCs were found to be largely internalized into neutrophils and exhibited superior superoxide anion inhibition than free drugs. Retinol incorporation into the nanocarriers facilitated their efficient targeting to the kidneys. The NLCs significantly mitigated MRSA burden and elastase distribution in the organs of MRSA-infected animals, and the greatest inhibition was observed in the kidneys. Bacterial clearance and neutrophil infiltration suppression attenuated the bacteremia-induced cytokine overexpression, leading to an improvement in the survival rate from 22% to 67%. CONCLUSIONS: The dual role of our NLCs endowed them with greater efficacy in treating MRSA bacteremia than that of free drugs.

Psoriasiform Inflammation Is Associated with Mitochondrial Fission/GDAP1L1 Signaling in Macrophages.

While psoriasis is known as a T cell- and dendritic cell-driven skin inflammation disease, macrophages are also reported to play some roles in its development. However, the signaling pathway of activated macrophages contributing to psoriasis is not entirely understood. Thus, we aimed to explore the possible mechanisms of how macrophages initiate and sustain psoriasis. The differentiated THP1 cells, stimulated by imiquimod (IMQ), were utilized as the activated macrophage model. IMQ was also employed to produce psoriasis-like lesions in mice. A transcriptomic assay of macrophages revealed that the expressions of pro-inflammatory mediators and GDAP1L1 were largely increased after an IMQ intervention. The depletion of GDAP1L1 by short hairpin (sh)RNA could inhibit cytokine release by macrophages. GDAP1L1 modulated cytokine production by activating the phosphorylation of mitogen-activated protein kinases (MAPKs) and nuclear factor (NF)-κB pathways. Besides GDAP1L1, another mitochondrial fission factor, Drp1, translocated from the cytosol to mitochondria after IMQ stimulation, followed by the mitochondrial fragmentation according to the immunofluorescence imaging. Clodronate liposomes were injected into the mice to deplete native macrophages for examining the latter's capacity on IMQ-induced inflammation. The THP1 cells, with or without GDAP1L1 silencing, were then transplanted into the mice to monitor the deposition of macrophages. We found a significant THP1 accumulation in the skin and lymph nodes. The silencing of GDAP1L1 in IMQ-treated animals reduced the psoriasiform severity score from 8 to 2. After depleting GDAP1L1, the THP1 recruitment in the lymph nodes was decreased by 3-fold. The skin histology showed that the GDAP1L1-mediated macrophage activation induced neutrophil chemotaxis and keratinocyte hyperproliferation. Thus, mitochondrial fission can be a target for fighting against psoriatic inflammation.

Efficacy of SPG-ODN 1826 Nanovehicles in Inducing M1 Phenotype through TLR-9 Activation in Murine Alveolar J774A.1 Cells: Plausible Nano-Immunotherapy for Lung Carcinoma.

Alveolar macrophages are the first line of defense against intruding pathogens and play a critical role in cancer immunology. The Toll-like receptor (TLR) family mediates an important role in recognizing and mounting an immune response against intruding microbes. TLR-9 is a member of the intracellular TLR family, which recognizes unmethylated CG motifs from the prokaryotic genome. Upon its activation, TLR-9 triggers downstream of the MyD-88-dependent transcriptional activation of NF-κB, and subsequently results in abundant inflammatory cytokines expression that induces a profound inflammatory milieu. The present exploratory investigation aimed at elucidating the potency of schizophyllan for entrapping ODN 1826 (SPG-ODN 1826)-mediated stimulation of TLR-9 in provoking an inflammatory-type response in murine alveolar macrophages. Schizophyllan (SPG), a representative of the ß-glucan family, was used in the present study as a nanovehicle for endosomal trafficking of CpG ODN 1826. TEM analysis of SPG-ODN 1826 nanovehicles revealed that the prepared nanovehicles are spherical and have an average size of about 100 nm. Interestingly, SPG-ODN 1826 nanovehicles were competent in delivering their therapeutic payload within endosomes of murine alveolar macrophage (J774A.1) cells. Exposure of these nanovehicles within LPS stimulated J774A.1, resulted in a significant provocation of reactive oxygen species (ROS) (p < 0.01) in comparison to CpG ODN 1826 alone. Moreover, the formulated nanovehicles succeeded in generating a profound Th1-based cytokine profile constituted by enhanced expression of IFN-γ (p < 0.001) and IL-1ß (p < 0.001) inflammatory cytokines. These findings clearly indicated the immunostimulatory potential of SPG-ODN 1826 nanovehicles for inducing the Th1-type phenotype, which would certainly assist in skewing M2 phenotype into the much-desired M1 type during lung cancer.

Formulation and in vitro evaluation of topical nanosponge-based gel containing butenafine for the treatment of fungal skin infection.

In the current study, four formulae (BNS1-BNS4) of butenafine (BTF) loaded nanosponges (NS) were fabricated by solvent emulsification technology, using different concentration of ethyl cellulose (EC) and polyvinyl alcohol (PVA) as a rate retarding polymer and surfactant, respectively. Prepared NS were characterized for particle size (PS), polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE) and drug loading (DL). Nanocarrier BNS3 was optimized based on the particle characterizations and drug encapsulation. It was further evaluated for physicochemical characterizations; FTIR, DSC, XRD and SEM. Selected NS BNS3 composed of BTF (100 mg), EC (200 mg) and 0.3% of PVA showed, PS (543 ± 0.67 nm), PDI (0.330 ± 0.02), ZP (-33.8 ± 0.89 mV), %EE (71.3 ± 0.34%) and %DL (22.8 ± 0.67%), respectively. Fabricated NS also revealed; polymer-drug compatibility, drug-encapsulation, non-crystalline state of the drug in the spherical NS as per the physicochemical evaluations. Optimized NS (BNS3) with equivalent amount of (1%, w/w or w/v) BTF was incorporated into the (1%, w/w or w/v) carbopol gel. BTF loaded NS based gel was then evaluated for viscosity, spreadability, flux, drug diffusion, antifungal, stability and skin irritation studies. BNS3 based topical gels exhibited a flux rate of 0.18 (mg/cm2.h), drug diffusion of 89.90 ± 0.87% in 24 h with Higuchi model following anomalous non-Fickian drug release. The BNS3 based-gel could be effective against pathogenic fungal strains.

Sustained release and enhanced oral bioavailability of rivaroxaban by PLGA nanoparticles with no food effect.

The purpose of the currents study was to enhance bioavailability of rivaroxaban (RXB) and reduce the food effect. RXB loaded PLGA nanoparticles (RXB-PLGA-NPs) were prepared by emulsion solvent evaporation method and optimized using central composite design (CDD). The optimized RXB-PLGA-NPs (F8) with composition, PLGA (125 mg), PVA (0.5%w/w) and RXB (20 mg) was found optimum with particle size (496 ± 8.5 nm), PDI (0.607), ZP (- 18.41 ± 3.14 mV), %EE (87.9 ± 8.6) and %DL (9.5 ± 1.6). The optimized NPs (F8) was further evaluated in vitro for DSC, FTIR, SEM and in vitro release studies. A comparative pharmacokinetic studies with commercial tablet (XARELTO®) were conducted on fasted and fed state rats. Compared to commercial tablet (XARELTO®), the RXB-PLGA-NPs (F8) exhibited a significant enhancement of bioavailability in both fasted and fed state. In addition, the bioavailability of RXB from NPs (F8) was found unaffected in the presence of food.

The clinical pharmacokinetics impact of medical nanometals on drug delivery system.

Nanometals are widely being used for diagnosis, treatment and monitoring of medical conditions. Majorly, nanometals are used to facilitate the delivery of drug to targeted site, minimize drug's penetration to healthy tissues, increase drug's bioavailability, and inhibit its uptake and elimination from the blood by reticuloendothelial process. Despite several benefits, use of nanoparticles as drug carriers is also associated with many problems including instability in blood during circulation, undesirable biodistribution, and toxicity. Research has shown that modification in physicochemical properties including shape, size, and surface can develop a nanometal with desired properties but devoid of associated problems. This review introduces the clinical impact of important physicochemical properties of nanometals such as surface modification, shape, and size. Further, the review focuses on evidence reporting the impact of these properties on pharmacokinetics of nanometals with focus on gold, silver, and iron oxide due to their wide use in the medical field.

Rat palatability, pharmacodynamics effect and bioavailability of mefenamic acid formulations utilizing hot-melt extrusion technology.

Mefenamic acid (MA) has been reported as a weakly soluble drug which presents weak in vivo absorption upon oral administration using conventional formulations. Solid dispersions (SDs) have been investigated extensively in literature for enhancing the solubility and bioavailability of weakly-soluble molecules. Hence, the aim of proposed study was to prepare MA novel formulations in the form of SDs using hot-melt extrusion technology in order to enhance its palatability, bioavailability, and pharmacodynamics effects/anti-inflammatory efficacy. Various SDs of MA were prepared using hot-melt extrusion technology, characterized physically and investigated for dissolution tests. Optimized SD formulations of MA were being subjected to palatability, pharmacodynamics, and pharmacokinetic studies in rats. Optimized SD of MA showed significant rat palatability tastes as compared with pure and marketed MA (p < .05). Anti-inflammatory efficacy of 20% SD and 25% SD of MA was found to be 86.44 and 89.83%, respectively, in comparison with 74.57 and 78.24% by pure MA and marketed MA, respectively. The anti-inflammatory efficacy of optimized SD was found to be significant as compared with pure and marketed MA (p < .05). The oral absorption of MA from optimized 20% SD was also noted as statistically significant as compared with pure MA (p < .05). The relative bioavailability of MA from 20 and 25% SDs was 2.97 and 2.24-folds higher than pure MA. The results of this study suggested that SDs prepared using hot-melt extrusion technology are capable to enhance palatability, anti-inflammatory efficacy, and oral bioavailability of MA in comparison with pure drug.

Apoptotic or Antiproliferative Activity of Natural Products against Keratinocytes for the Treatment of Psoriasis.

Natural products or herbs can be used as an effective therapy for treating psoriasis, an autoimmune skin disease that involves keratinocyte overproliferation. It has been demonstrated that phytomedicine, which is used for psoriasis patients, provides some advantages, including natural sources, a lower risk of adverse effects, and the avoidance of dissatisfaction with conventional therapy. The herbal products' structural diversity and multiple mechanisms of action have enabled the synergistic activity to mitigate psoriasis. In recent years, the concept of using natural products as antiproliferative agents in psoriasis treatment has attracted increasing attention in basic and clinical investigations. This review highlights the development of an apoptotic or antiproliferatic strategy for natural-product management in the treatment of psoriasis. We systematically introduce the concepts and molecular mechanisms of keratinocyte-proliferation inhibition by crude extracts or natural compounds that were isolated from natural resources, especially plants. Most of these studies focus on evaluation through an in vitro keratinocyte model and an in vivo psoriasis-like animal model. Topical delivery is the major route for the in vivo or clinical administration of these natural products. The potential use of antiproliferative phytomedicine on hyperproliferative keratinocytes suggests a way forward for generating advances in the field of psoriasis therapy.

Estimating the Solubility, Solution Thermodynamics, and Molecular Interaction of Aliskiren Hemifumarate in Alkylimidazolium Based Ionic Liquids.

Estimating the solubility and solution thermodynamics parameters of aliskiren hemifumarate (AHF) in three different room temperature ionic liquids (RTILs), Transcutol-HP (THP) and water are interesting as there is no solubility data available in the literature. In the current study, the solubility and solution thermodynamics of AHF in three different RTILs, THP and water at the temperature range from 298.2 to 318.2 K under air pressure 0.1 MP were evaluated. The solid phase evaluation by Differential Scanning Calorimetry (DSC) and Powder X-ray Diffraction (PXRD) indicated no conversion of AHF into polymorph. The mole fraction solubility of AHF was found to be highest in 1-hexyl-3-methylimidazolium hexafluorophosphate (HMMHFP) ionic liquid (7.46 × 10-2) at 318.2 K. The obtained solubility values of AHF was regressed by the Apelblat and van't Hoff models with overall root mean square deviations (RMSD) of 0.62% and 1.42%, respectively. The ideal solubility of AHF was higher compared to experimental solubility values at different temperatures. The lowest activity coefficient was found in HMMHFP, which confirmed highest molecular interaction between AHF-HMMHFP. The estimated thermodynamic parameters confirmed endothermic and entropy driven dissolution of AHF in different RTILs, THP, and water.

Influence of chitosan coating on the oral bioavailability of gold nanoparticles in rats.

Gold nanoparticles are one of the most extensively investigated metallic nanoparticles for several applications. It is less toxic than other metallic nanolattices. The exceptional electrical and thermal conductivity of gold make it possible to be administered as non-invasive radiofrequency irradiation therapy that produces sufficient heat to kill tumor cells. Nanoparticles are generally administered intravenously instead of orally due to negligible oral absorption and cellular uptake. This study evaluated the oral bioavailability of gold nanoparticles coated with chitosan (C-AuNPs), a natural mucoadhesive polymer. We employed traditional method of evaluating bioavailability that involve estimation of maximum concentrations and area under the curve of 3 nm chitosan coated gold nanoparticles (C-AuNPs) in the rat plasma following intravenous and oral administrations (0.8 mg and 8 mg/kg body weight respectively). The oral bioavailability of C-AuNPs was found to be 2.46% (approximately 25 folds higher than polyethylene glycol (PEG) coated gold nanoparticles, reported earlier). These findings suggest that chitosan coating could be better than PEG coating for the enhancement of oral bioavailability of nanoparticles.

Mixing of low-dose cohesive drug and overcoming of pre-blending step using a new gentle-wing high-shear mixer granulator.

The objective of this study was to examine the influence of drug amount and mixing time on the homogeneity and content uniformity of a low-dose drug formulation during the dry mixing step using a new gentle-wing high-shear mixer. Moreover, the study investigated the influence of drug incorporation mode on the content uniformity of tablets manufactured by different methods. Albuterol sulfate was selected as a model drug and was blended with the other excipients at two different levels, 1% w/w and 5% w/w at impeller speed of 300 rpm and chopper speed of 3000 rpm for 30 min. Utilizing a 1 ml unit side-sampling thief probe, triplicate samples were taken from nine different positions in the mixer bowl at selected time points. Two methods were used for manufacturing of tablets, direct compression and wet granulation. The produced tablets were sampled at the beginning, middle, and end of the compression cycle. An analysis of variance analysis indicated the significant effect (p < .05) of drug amount on the content uniformity of the powder blend and the corresponding tablets. For 1% w/w and 5% w/w formulations, incorporation of the drug in the granulating fluid provided tablets with excellent content uniformity and very low relative standard deviation (∼0.61%) during the whole tableting cycle compared to direct compression and granulation method with dry incorporation mode of the drug. Overall, gentle-wing mixer is a good candidate for mixing of low-dose cohesive drug and provides tablets with acceptable content uniformity with no need for pre-blending step.

Anticancer Efficacy of Self-Nanoemulsifying Drug Delivery System of Sunitinib Malate.

Sunitinib malate (SM) is reported as a weakly soluble drug in water due to its poor dissolution rate and oral bioavailability. Hence, in the current study, various "self-nanoemulsifying drug delivery systems (SNEDDS)" of SM were prepared, characterized and evaluated for the enhancement of its in vitro dissolution rate and anticancer efficacy. On the basis of solubilization potential of SM in various excipients, "Lauroglycol-90 (oil), Triton-X100 (surfactant) and Transcutol-P (cosurfactant)" were selected for the preparation of SM SNEDDS. SM-loaded SNEDDS were developed by spontaneous emulsification method, characterized and evaluated for "thermodynamic stability, self-nanoemulsification efficiency, droplet size, polydispersity index (PDI), zeta potential (ZP), surface morphology, refractive index (RI), the percent of transmittance (% T) and drug release profile." In vitro dissolution rate of SM was significantly enhanced from an optimized SNEDDS in comparison with SM suspension. The optimized SNEDDS of SM with droplet size of 42.3 nm, PDI value of 0.174, ZP value of -36.4 mV, RI value of 1.339, % T value of 97.3%, and drug release profile of 95.4% (after 24 h via dialysis membrane) was selected for in vitro anticancer efficacy in human colon cancer cells (HT-29) by MTT assay. MTT assay indicated significant anticancer efficacy of optimized SM SNEDDS against HT-29 cells in comparison with free SM. The results of this study showed the great potential of SNEDDS in the enhancement of in vitro dissolution rate and anticancer efficacy of poorly soluble drug such as SM.

Chemo-photothermal therapy of chitosan/gold nanorod clusters for antibacterial treatment against the infection of planktonic and biofilm MRSA.

Bacterial infections trigger inflammation and impede the closure of skin wounds. The misuse of antibiotics exacerbates skin infections by generating multidrug-resistant bacteria. In this study, we developed chemo-photothermal therapy (chemo-PTT) based on near-infrared (NIR)-irradiated chitosan/gold nanorod (GNR) clusters as anti-methicillin-resistant Staphylococcus aureus (MRSA) agents. The nanocomposites exhibited an average size of 223 nm with a surface charge of 36 mV. These plasmonic nanocomposites demonstrated on-demand and rapid hyperthermal action under NIR. The combined effect of positive charge and PTT by NIR-irradiated nanocomposites resulted in a remarkable inhibition rate of 96 % against planktonic MRSA, indicating a synergistic activity compared to chitosan nanoparticles or GNR alone. The nanocomposites easily penetrated the biofilm matrix. The combination of chemical and photothermal treatments by NIR-stimulated clusters significantly damaged the biofilm structure, eradicating MRSA inside the biomass. NIR-irradiated chitosan/GNR clusters increased the skin temperature of mice by 13 °C. The plasmonic nanocomposites induced negligible skin irritation in vivo. In summary, this novel nanosystem demonstrated potent antibacterial effects against planktonic and biofilm MRSA, showcasing the possible efficacy in treating skin infections.

Skin delivery of synthetic benzoyl pterostilbenes suppresses atopic dermatitis-like inflammation through the inhibition of keratinocyte and macrophage activation.

Atopic dermatitis (AD) is one of the most common skin autoimmune diseases needing continuous anti-inflammatory management. Pterostilbene is reported to exhibit anti-inflammatory activity with higher bioavailability and stability than its parent compound, resveratrol. In this study, a series of synthetic pterostilbene analogs were designed by the hybridization of pterostilbene with chalcones or benzoyl chloride. Seventeen analogs derived from pterostilbene were synthesized with differences in the positions of hydroxyl, methoxyl, or fluoro moieties. These compounds were screened by the inhibitory effect on the overexpressed Th2-associated cytokines/chemokines in the activated human keratinocytes (HaCaT). The anti-IL-5 and anti-CCL5 activity of these compounds led to the identification of three effective compounds: 3a ((E)- 4-(3,5-dimethoxystyryl)phenyl benzoate), 3d ((E)- 4-(3,5-dimethoxystyryl)phenyl 2-methoxybenzoate), and 3g ((E)- 4-(3,5-dimethoxystyryl)phenyl 2-fluorobenzoate). These benzoyl pterostilbenes also significantly decreased Th1/Th17-associated proinflammatory mediators in the activated macrophages (differentiated THP-1). The result showed that the conditioned medium of benzoyl pterostilbene-treated macrophages reduced the phosphorylated STAT3 in the keratinocytes, indicating the blockade of crosstalk between resident and immune cells. Compounds 3d and 3g generally showed greater skin absorption than 3a. The flux of 3g across barrier-defective skins mimicking the AD skin was 3-fold higher than that of across intact skin. The dinitrochlorobenzene (DNCB)-induced AD mouse model manifested that topical delivery with 3g improved the pathological signs through inhibiting cytokines/chemokines (IL-5, TNF-α, CCL17, and CCL22) and macrophage recruitment. The epidermal thickness was reduced from 76 to 55 µm after topical 3g delivery. The therapeutic activity of 3g was comparable to that of tacrolimus (TAC) used as a positive control. The benzoyl pterostilbenes attenuated the inflammation via the MAPK and c-Jun signaling. Furthermore, this study provided experimental evidence of benzoyl pterostilbene analogs for therapeutic potential on AD.

Development and Optimization of Sildenafil Orodispersible Mini-Tablets (ODMTs) for Treatment of Pediatric Pulmonary Hypertension Using Response Surface Methodology.

The availability of age-appropriate oral dosage forms for pediatric patients has remained a challenge. Orodispersible mini-tablets (ODMTs) are a promising delivery system for pediatric patients. The purpose of this work was the development and optimization of sildenafil ODMTs as a new dosage form for the treatment of pulmonary hypertension in children using a design-of-experiment (DoE) approach. A two-factor, three levels (32) full-factorial design was employed to obtain the optimized formulation. The levels of microcrystalline cellulose (MCC; 10-40% w/w) and partially pre-gelatinized starch (PPGS; 2-10% w/w) were set as independent formulation variables. In addition, mechanical strength, disintegration time (DT), and percent drug release were set as critical quality attributes (CQAs) of sildenafil ODMTs. Further, formulation variables were optimized using the desirability function. ANOVA analysis proved that MCC and PPGS had a significant (p < 0.05) impact on CQAs of sildenafil ODMTs with a pronounced influence of PPGS. The optimized formulation was achieved at low (10% w/w) and high (10% w/w) levels of MCC and PPGS, respectively. The optimized sildenafil ODMTs showed crushing strength of 4.72 ± 0.34 KP, friability of 0.71 ± 0.04%, DT of 39.11 ± 1.03 s, and sildenafil release of 86.21 ± 2.41% after 30 min that achieves the USP acceptance criteria for ODMTs. Validation experiments have shown that the acceptable prediction error (<5%) indicated the robustness of the generated design. In conclusion, sildenafil ODMTs have been developed as a suitable oral formulation for the treatment of pediatric pulmonary hypertension using the fluid bed granulation process and the DoE approach.

Application of Response Surface Methodology to Improve the Tableting Properties of Poorly Compactable and High-Drug-Loading Canagliflozin Using Nano-Sized Colloidal Silica.

Designing a robust direct compression (DC) formulation for an active pharmaceutical ingredient (API) with poor flow and compaction properties at a high API load is challenging. This study tackled two challenges: the unfavorable flow characteristics and tableting problems associated with a high-drug-loading canagliflozin (CNG), facilitating high-speed DC tableting. This was accomplished through a single-step dry coating process using hydrophilic nano-sized colloidal silica. A 32 full-factorial experimental design was carried out to optimize the independent process variables, namely, the weight percent of silica nanoparticles (X1) and mixing time (X2). Flow, bulk density, and compaction properties of CNG-silica blends were investigated, and the optimized blend was subsequently compressed into tablets using the DC technique. A regression analysis exhibited a significant (p ≤ 0.05) influence of both X1 and X2 on the characteristics of CNG with a predominant effect of X1. Additionally, robust tablets were produced from the processed powders in comparison with those from the control batch. Furthermore, the produced tablets showed significantly lower tablet ejection forces than those from the control batch, highlighting the lubrication impact of the silica nanoparticles. Interestingly, these tablets displayed improved disintegration time and dissolution rates. In conclusion, a dry coating process using silica nanoparticles presents a chance to address the poor flow and tableting problems of CNG, while minimizing the need for excessive excipients, which is crucial for the effective development of a small-sized tablet and the achievement of a cost-effective manufacturing process.

Small interfering RNA-based nanotherapeutics for treating skin-related diseases.

INTRODUCTION: RNA interference (RNAi) has demonstrated great potential in treating skin-related diseases, as small interfering RNA (siRNA) can efficiently silence specific genes. The design of skin delivery systems for siRNA is important to protect the nucleic acid while facilitating both skin targeting and cellular ingestion. Entrapment of siRNA into nanocarriers can accomplish these aims, contributing to improved targeting, controlled release, and increased transfection. AREAS COVERED: The siRNA-based nanotherapeutics for treating skin disorders are summarized. First, the mechanisms of RNAi are presented, followed by the introduction of challenges for skin therapy. Then, the different nanoparticle types used for siRNA skin delivery are described. Subsequently, we introduce the mechanisms of how nanoparticles enhance siRNA skin penetration. Finally, the current investigations associated with nanoparticulate siRNA application in skin disease management are reviewed. EXPERT OPINION: The potential application of nanotherapeutic RNAi allows for a novel skin application strategy. Further clinical studies are required to confirm the findings in the cell-based or animal experiments. The capability of large-scale production and reproducibility of nanoparticle products are also critical for translation to commercialization. siRNA delivery by nanocarriers should be optimized to attain cutaneous targeting without the risk of toxicity.