RESUMO
Cellulose nanofibers, a sustainable and promising material with widespread applications, exhibit appreciable strength and excellent mechanical and physicochemical properties. The preparation of cellulosic nanofibers from food or agricultural residue is not sustainable. Therefore, this study was designed to use three halophytic plants (Cressa cretica, Phragmites karka, and Suaeda fruticosa) to extract cellulose for the subsequent conversion to cellulosic nanofibers composites. The other extracted biomass components including lignin, hemicellulose, and pectin were also utilized to obtain industrially valuable enzymes. The maximum pectinase (31.56 IU mL-1), xylanase (35.21 IU mL-1), and laccase (15.89 IU mL-1) were produced after the fermentation of extracted pectin, hemicellulose, and lignin from S. fruticosa, P. karka, and C. cretica, respectively. Cellulose was methylated (with a degree of substitution of 2.4) and subsequently converted into a composite using polyvinyl alcohol. Scanning electron microscopy and Fourier-transform infrared spectroscopy confirmed the successful synthesis of the composites. The composites made up of cellulose from C. cretica and S. fruticosa had a high tensile strength (21.5 and 15.2 MPa) and low biodegradability (47.58% and 44.56%, respectively) after dumping for 3 months in soil, as compared with the composite from P. karka (98.79% biodegradability and 4.9 MPa tensile strength). Moreover, all the composites exhibited antibacterial activity against gram-negative bacteria (Escherichia coli and Klebsiella pneumoniae) and gram-positive bacteria (Staphylococcus aureus). Hence, this study emphasizes the possibility for various industrial applications of biomass from halophytic plants.
Assuntos
Celulose , Celulose/química , Plantas Tolerantes a Sal/química , Plantas Tolerantes a Sal/metabolismo , Lignina/química , Resistência à Tração , Antibacterianos/farmacologia , Antibacterianos/química , Antibacterianos/isolamento & purificação , Poligalacturonase/metabolismo , Poligalacturonase/química , Espectroscopia de Infravermelho com Transformada de Fourier , Lacase/metabolismo , Lacase/química , Nanofibras/química , Pectinas/química , Pectinas/isolamento & purificação , Pectinas/metabolismo , Chenopodiaceae/química , Chenopodiaceae/metabolismo , Polissacarídeos/química , Polissacarídeos/isolamento & purificação , Endo-1,4-beta-Xilanases/metabolismo , Endo-1,4-beta-Xilanases/químicaRESUMO
Global production of sugarcane bagasse (SB) by sugar industries exceeds more than 100 tons per annum. SB is rich in lignin and polysaccharide and hence can serve as a low-cost energy and carbon source for the growth of industrially important microorganism. However, various other applications of SB have also been investigated. In this study, SB was used as an adsorbent to remove an azo dye, malachite green. Subsequently, the dye-adsorbed SB was fermented by Trametes pubescens MB 89 for the production of laccase enzyme. The fungal pretreated SB was further utilized as a substrate for the simultaneous production of multiple plant cell wall degrading enzymes including, cellulase, xylanase, pectinase, and amylase by thermophilic bacterial strains. Results showed that 0.1% SB removed 97.04% malachite green at 30°C after 30 min from a solution containing 66 ppm of the dye. Fermentation of the dye-adsorbed SB by T. pubescens MB 89 yielded 667.203 IU mL-1 laccase. Moreover, Brevibacillus borstelensis UE10 produced 38.41 and 18.6 IU mL-1 ß-glucosidase and pectinase, respectively, by using fungal-pretreated SB. Cultivation of B. borstelensis UE27 in the medium containing the same substrate yielded 32.14 IU mL-1 of endoglucanase and 27.23 IU mL-1 of ß-glucosidase. Likewise, Neobacillus sedimentimangrovi UE25 could produce a mix of ß-glucosidase (37.24 IU mL-1 ), xylanase (18.65 IU mL-1 ) and endoglucanase (26.65 IU mL-1 ). Hence, this study led to the development of a method through which dye-containing textile effluent can be treated by SB along with the production of industrially important enzymes.
Assuntos
Celulase , Corantes de Rosanilina , Saccharum , Celulose/metabolismo , Celulase/metabolismo , Poligalacturonase , Saccharum/metabolismo , Lacase , Trametes/metabolismo , Fermentação , beta-Glucosidase/metabolismoRESUMO
Mechanically-robust nanocomposite membranes have been developed via crosslinking chemistry and electrospinning technique based on the rational selection of dispersed phase materials with high Young's modulus (i.e., graphene and multiwalled carbon nanotubes) and Cassie-Baxter design and used for oil and water separation. Proper selection of dispersed phase materials can enhance the stiffness of nanocomposite fiber membranes while their length has to be larger than their critical length. Chemical modification of the dispersed phase materials with fluorochemcials and their induced roughness were critical to achieve superhydrophobocity. Surface analytic tools including goniometer, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, atomic force microscopy (AFM) and scanning electron microscope (SEM) were applied to characterize the superhydrophobic nanocomposite membranes. An AFM-based nanoindentation technique was used to measure quantitativly the stiffness of the nanocomposite membranes for local region and whole composites, compared with the results by a tensile test technique. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to confirm composition and formation of nanocomposite membranes. These membranes demonstrated excellent oil/water separation. This work has potential application in the field of water purification and remediation.
Assuntos
Nanocompostos , Nanotubos de Carbono , Nanotubos de Carbono/química , Nanocompostos/química , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
This paper proposes a barrier function adaptive non-singular terminal sliding mode controller for a six-degrees-of-freedom (6DoF) quad-rotor in the existence of matched disturbances. For this reason, a linear sliding surface according to the tracking error dynamics is proposed for the convergence of tracking errors to origin. Afterward, a novel non-singular terminal sliding surface is suggested to guarantee the finite-time reachability of the linear sliding surface to origin. Moreover, for the rejection of the matched disturbances that enter into the quad-rotor system, an adaptive control law based on barrier function is recommended to approximate the matched disturbances at any moment. The barrier function-based control technique has two valuable properties. First, this function forces the error dynamics to converge on a region near the origin in a finite time. Secondly, it can remove the increase in the adaptive gain because of the matched disturbances. Lastly, simulation results are given to demonstrate the validation of this technique.
RESUMO
OBJECTIVES: To evaluated the home healthcare efficacy in managing tracheostomy patients at King Abdulaziz Medical City under the Ministry of National Guard Health Affairs. Home healthcare is care provided to patients in the convenience of their homes to ensure high-quality care based on healthcare providers' supervision. METHODS: This retrospective cohort study utilizing a non-probability consecutive sampling technique, including all available tracheal patients with no exclusion criteria, was carried out in Riyadh, Saudi Arabia, between January 2019 and June 2022. The collected data included patient demographic variables and respiratory settings (ventilation type, daily ventilation need, tracheostomy duration, and ventilator settings). The outcomes included mortality rate and therapeutic outcomes of tracheal management. RESULTS: Of the 183 patients in the study, the most common type of respiratory-related infection was pneumonia (53%). Unlike respiratory-related causes, The mortality rate of patients admitted to the intensive care unit that was unrelated to respiratory causes was statistically significant (57%) (p=0.003). The mortality rate of patients who used aerosol tracheal collars (34%) was markedly higher than mechanically ventilated patients (57%) (p=0.004). The mortality rate following discharge from HHC was 40%, and was higher among patients aged >70 years (47%) (p=0.04). CONCLUSION: Pneumonia was associated with the majority of ventilator-related infections and resulted in hospital readmissions. Ensuring proper practices and caregiver education is crucial to decrease the incidence of ventilator-related infections.
Assuntos
Serviços de Assistência Domiciliar , Respiração Artificial , Traqueostomia , Humanos , Estudos Retrospectivos , Masculino , Feminino , Pessoa de Meia-Idade , Idoso , Arábia Saudita/epidemiologia , Adulto , Pneumonia Associada à Ventilação Mecânica/epidemiologia , Pneumonia Associada à Ventilação Mecânica/prevenção & controle , Unidades de Terapia Intensiva , Estudos de CoortesRESUMO
A co-precipitation technique has been used to prepare Bismuth tungstate nanoparticles (Bi2WO6) for electrochemical capacitors and electrochemical sensing of Ascorbic acid (AA). Using a scanning rate of 10 mV s -1, the electrode was performed as the pseudocapacitance behavior and the specific capacitance to be up to 677 Fg -1 at 1 A/g. Bi2WO6 versus Glassy carbon electrode (GCE) was also used to study the behavior of the Bi2WO6 modified electrodes in detecting ascorbic acid. This electrochemical sensor shows excellent electrocatalytic performance when ascorbic acid is present, as determined by differential pulse voltammetry. In solution, ascorbic acid diffuses to an electrode surface and controls its surface properties. Based on the results from the investigation, the sensor showed a detection sensitivity of 0.26 mM/mA, and a limit of detection (LOD) of 77.85 mM. It is clear from these results that Bi2WO6 may find application as an electrode material for supercapacitors and glucose sensors.
Assuntos
Nanopartículas Metálicas , Tungstênio , Tungstênio/química , Bismuto , Eletrodos , Nanopartículas Metálicas/química , Ácido Ascórbico/química , Técnicas Eletroquímicas/métodosRESUMO
In this study, magnetite particles were successfully embedded in sodium carboxymethyl cellulose as beads using FeCl3 as the cross-linker in two step-method and it was used as a Fenton-like catalyst to degrade sulfamethoxazole in aqueous solution. The surface morphology and functional groups influence of the Na-CMC magnetic beads was studied using FTIR and SEM analysis. The nature of synthesized iron oxide particles was confirmed as magnetite using XRD diffraction. The structural arrangement of Fe3+ and iron oxide particles with CMC polymer was discussed. The influential factors for SMX degradation efficiency were investigated including the pH of the reaction medium (4.0), catalyst dosage (0.2 g L-1) and initial SMX concentration (30 mg L-1). The results showed that under optimal conditions 81.89% SMX degraded in 40 min using H2O2. The reduction in COD was estimated to be 81.2%. SMX degradation was initiated neither by the cleaving of C-S nor C-N followed by some chemical reactions. Complete mineralization of SMX was not achieved which could be due to an insufficient amount of Fe particles in CMC matrix that are responsible for the generation of *OH radicals. It was explored that degradation followed first order kinetics. Fabricated beads were successfully applied in a floating bed column in which the beads were allowed to float in sewage water spiked with SMX for 40 min. A total reduction of 79% of COD was achieved in treating sewage water. The beads could be used 2-3 times with significant reduction in catalytic activity. It was found that the degradation efficiency was attributed to a stable structure, textural property, active sites and *OH radicals.
Assuntos
Sulfametoxazol , Poluentes Químicos da Água , Sulfametoxazol/química , Peróxido de Hidrogênio/química , Óxido Ferroso-Férrico , Celulose , Esgotos , Água , Poluentes Químicos da Água/análise , OxirreduçãoRESUMO
The electrochemical degradation of alizarin red dye was studied using bismuth oxyhalide attached to bismuth vanadate nanocomposite synthesized via a simple solvothermal method. The electrochemical degradation of alizarin red dye was treated at current densities of 3 and 5 mA cm-1 for 30 min under different supporting electrolyte mediums (NaCl and KCl). Also, the electrochemical degradation of BiOBr/BiVO4 electrode shows higher degradation percentages of 97 and 99 for NaCl and KCl electrolyte solutions, which are higher degradation percentages than pure BiVO4 electrode (88 and 91 for NaCl and KCl). Also, the BiOBr/BiVO4 electrode shows 100% COD reduction during the 30th min of alizarin red dye using both NaCl and KCl electrolyte solutions. This may indicate that the prepared BiOBr/BiVO4 electrode shows an efficient electrode material for the degradation of textile dyes.
Assuntos
Poluentes Ambientais , Águas Residuárias , Bismuto , Cloreto de Sódio , EletrodosRESUMO
Agro-industrial wastes and by-products are the natural and abundant resources of biomaterials to obtain various value-added items such as biopolymer films, bio-composites and enzymes. This study presents a way to fractionate and to convert an agro-industrial residue, sugarcane bagasse (SB), into useful materials with potential applications. Initially cellulose was extracted from SB which was then converted into methylcellulose. The synthesized methylcellulose was characterized by scanning electron microscopy and FTIR. Biopolymer film was prepared by using methylcellulose, polyvinyl alcohol (PVA), glutaraldehyde, starch and glycerol. The biopolymer was characterized to exhibit 16.30 MPa tensile strength, 0.05 g/m2 h of water vapor transmission rate, 366 % of water absorption to its original weight after 115 min of immersion, 59.08 % water solubility, 99.05 % moisture retention capability and 6.01 % of moisture absorption after 144 h. Furthermore, in vitro studies on absorption and dissolution of model drug by biopolymer showed 2.04 and 104.59 % of swelling ratio and equilibrium water content, respectively. Biocompatibility of the biopolymer was checked by using gelatin media and it was observed that swelling ratio was higher in initial 20 min of contact. The extracted hemicellulose and pectin from SB were fermented by a thermophilic bacterial strain, Neobacillus sedimentimangrovi UE25 that yielded 12.52 and 6.4 IU mL-1 of xylanase and pectinase, respectively. These industrially important enzymes further augmented the utility of SB in this study. Therefore, this study emphasizes the possibility for industrial application of SB to form various products.
Assuntos
Celulose , Saccharum , Celulose/química , Metilcelulose , Álcool de Polivinil/química , Saccharum/químicaRESUMO
This study focuses on using Casuarina equisetifolia biomass for pilot-scale glucose oxidase production from Aspergillus niger and its application in the removal of trace organic contaminants (TrOCs) from municipal wastewater through the bio-Fenton oxidation. The cost of glucose oxidase was 0.005 $/U, including the optimum production parameters, 10% biomass, 7% sucrose, 1% peptone, and 3% CaCO3 at 96 h with an enzyme activity of 670 U/mL. Optimized conditions for H2O2 were 1 M glucose, 100 U/mL glucose oxidase, and 120 mins of incubation, resulting in 544.3 mg/L H2O2. Thus, H2O2 produced under these conditions lead to bio-Fenton oxidation resulting in the removal of 36-92% of nine TrOCs in municipal wastewater at pH 7.0 in 360 mins. Therefore, this work establishes the cost-effective glucose oxidase-producing H2O2 as an attractive bioremediating agent to enhance the removal of TrOCs in wastewater at neutral pH.
Assuntos
Águas Residuárias , Poluentes Químicos da Água , Glucose Oxidase , Biomassa , Peróxido de Hidrogênio , Análise Custo-Benefício , Poluentes Químicos da Água/análise , Oxirredução , Eliminação de Resíduos Líquidos/métodosRESUMO
A two-dimensional nanoflake (Fe/Cu-TPA) was prepared through a simple ultrasonic-centrifuge method. Fe/Cu-TPA has prominent performance on the removal of Pb2+ with low consistences. More than 99% lead (II) (Pb2+) was removed. The adsorption equipoise was established within 60 min for 50 mg L-1 Pb2+. Fe/Cu-TPA shows excellent regenerability with 19.04% decline of Pb2+ adsorption competence in 5 cycles. There are two models for Fe/Cu-TPA adsorption of Pb2+, pseudo-second-order dynamic model and Langmuir isotherm model, with a utmost adsorption competence of 213.56 mg g-1. This work offers a new candidate material for the industrial-grade Pb2+ adsorbents with promising application prospect.
Assuntos
Cobre , Poluentes Químicos da Água , Esgotos , Chumbo , Adsorção , Cátions , Cinética , Poluentes Químicos da Água/análise , Concentração de Íons de HidrogênioRESUMO
Recently, environmental and ecological concerns have become a major issue owing to the shortage of resources, high cost, and so forth. In my research, I present an innovative, environmentally friendly, and economical way to prepare nanocellulose from grass wastes with a sodium hypochlorite (NaClO) solution of different concentrations (1−6% mol) at different times 10−80 min, washed with distilled water, and treated with ultrasonic waves. The optimum yield of the isolated cellulose was 95%, 90%, and 87% NaClO at 25 °C for 20 min and with NaOH and H2SO4 at 25 °C with 5% M, respectively. The obtained samples were characterized by dynamic light scattering (DLS), Fourier-transform infrared (FT-IR) spectroscopy, and X-ray diffraction (XRD). The effect of test temperature and reaction times on the crystallinity index (IC) of GNFC with different treated mediums was carried out and investigated. The IC was analyzed using the diffraction pattern and computed according to the Segal empirical method (method A), and the sum of the area under the crystalline adjusted peaks (method B) and their values proved that the effect of temperature is prominent. In both methods, GNFC/H2SO4 had the highest value followed by GNFC/NaOH, GNFC/NaClO and real sample nano fiber cellulose (RSNFC). The infrared spectral features showed no distinct changes of the four cellulose specimens at different conditions. The particle size distribution data proved that low acid concentration hydrolysis was not sufficient to obtain nano-sized cellulose particles. The Zeta potential was higher in accordance with (GNFC/H2SO4 > GNFC/NaOH > GNFC/NaClO), indicating the acid higher effect.
RESUMO
Instantaneously determining the type and amount of oil product passing through pipelines is one of the most critical operations in the oil, polymer and petrochemical industries. In this research, a detection system is proposed in order to monitor oil pipelines. The system uses a dual-energy gamma source of americium-241 and barium-133, a test pipe, and a NaI detector. This structure is implemented in the Monte Carlo N Particle (MCNP) code. It should be noted that the results of this simulation have been validated with a laboratory structure. In the test pipe, four oil products-ethylene glycol, crude oil, gasoil, and gasoline-were simulated two by two at various volume percentages. After receiving the signal from the detector, the feature extraction operation was started in order to provide suitable inputs for training the neural network. Four time characteristics-variance, fourth order moment, skewness, and kurtosis-were extracted from the received signal and used as the inputs of four Radial Basis Function (RBF) neural networks. The implemented neural networks were able to predict the volume ratio of each product with great accuracy. High accuracy, low cost in implementing the proposed system, and lower computational cost than previous detection methods are among the advantages of this research that increases its applicability in the oil industry. It is worth mentioning that although the presented system in this study is for monitoring of petroleum fluids, it can be easily used for other types of fluids such as polymeric fluids.
RESUMO
Spinel cobalt ferrite/hexagonal strontium hexaferrite (2CoFe2O4/SrFe12-2xSmxLaxO19; x = 0.2, 0.5, 1.0, 1.5) nanocomposites were fabricated using the tartaric acid precursor pathway, and the effects of La3+-Sm3+ double substitution on the formation, structure, and magnetic properties of CoFe2O4/SrFe12-2xSmxLaxO19 nanocomposite at different annealing temperatures were assayed through X-ray diffraction, scanning electron microscopy, and vibrating sample magnetometry. A pure 2CoFe2O4/SrFe12O19 nanocomposite was obtained from the tartrate precursor complex annealed at 1100 °C for 2 h. The substitution of Fe3+ ion by Sm3-+La3+ions promoted the formation of pure 2CoFe2O4/SrFe12O19 nanocomposite at 1100 °C. The positions and intensities of the strongest peaks of hexagonal ferrite changed after Sm3+-La3+ substitution at ≤1100 °C. In addition, samples with an Sm3+-La3+ ratio of ≥1.0 annealed at 1200 °C for 2 h showed diffraction peaks for lanthanum cobalt oxide (La3Co3O8; dominant phase) and samarium ferrite (SmFeO3). The crystallite size range at all constituent phases was in the nanocrystalline range, from 39.4 nm to 122.4 nm. The average crystallite size of SrFe12O19 phase increased with the number of Sm3+-La3+ substitutions, whereas that of CoFe2O4 phase decreased with an x of up to 0.5. La-Sm co-doped ion substitution increased the saturation magnetization (Ms) value and the subrogated ratio to 0.2, and the Ms value decreased with the increasing number of double substitutions. A high saturation magnetization value (Ms = 69.6 emu/g) was obtained using a La3+-Sm3+ co-doped ratio of 0.2 at 1200 for 2 h, and a high coercive force value (Hc = 1192.0 Oe) was acquired using the same ratio at 1000 °C.
RESUMO
In this paper, a common and widely used micro-heat sink (H/S) was redesigned and simulated using computational fluid dynamics methods. This H/S has a large number of microchannels in which the walls are wavy (wavy microchannel heat sink: WMCHS). To improve cooling, two (Al2O3 and CuO) water-based nanofluids (NFs) were used as cooling fluids, and their performance was compared. For this purpose, studies were carried out at three Reynolds numbers (Re) of 500, 1000, and 1500 when the volume percent (φ) of the nanoparticles (NPs) was increased to 2%. The mixture two-phase (T-P) model was utilized to simulate the NFs. Results showed that using the designed WMCHS compared to the common H/S reduces the average and maximum temperatures (T-Max) up to 2 °C. Moreover, using the Al2O3 NF is more suitable in terms of WMCHS temperature uniformity as well as its thermal resistance compared to the CuO NF. Increasing the φ is desirable in terms of temperature, but it enhances the pumping power (PP). Besides, the Figure of Merit (FOM) was investigated, and it was found that the value is greater at a higher volume percentage.
RESUMO
Al Amar gold ore is rich in sulfides of base metals and is commercially applied for the production of copper concentrate via floatation and gold bullion by cyanidation of tailing. The current process flowsheet suffers from low gold recovery (â¼60%) and loss of metals in the hazardous stockpiled residue. This work addresses these drawbacks by a newly experimental redesign of the process circuit. The innovative flowsheet comprises a sequence of operations, including acid leaching of the roasted ore, gold recovery from the leach residue, and preparation of a valuable zinc-copper-lead ferrite from the filtrate by coprecipitation followed by heat treatment. The ore is roasted at 650 °C and then leached in 20% HCl, where most of Zn, Cu, Pb, and Fe contents are dissolved, while pristine gold remains in the residue. Most of the gold (â¼93%) can be recovered by cyanidation of the acid leach residue. Stoichiometric ratios of dissolved Zn, Cu, Pb, and Fe in the acid leach solution can be kept at 0.6:0.3:0.1:2.0, respectively, only by adding a small amount of ferric chloride. These metals are coprecipitated at varying pH values from 8 to 10, and the produced powders are annealed at temperatures from 600 to 1100 °C. X-ray diffraction (XRD) charts reveal sharp peaks of the targeted Zn0.6Cu0.3Pb0.1Fe2O4 phase at 600 °C, while a highly crystalline single phase is obtained at 1100 °C, independently of precipitation pH. The crystalline size of the produced powders increases with annealing temperatures (from 18-27 nm at 600 °C to 85-105 nm at 1100 °C). The finest size is found at pH 12. Scanning electron microscopy (SEM) investigation shows uniform cubic microstructures of samples annealed at 1100 °C. The produced ferrite powders exhibit soft magnetic characteristics. Saturation magnetization, M s, substantially increases with pH. Coercivity, H c, increases with increasing annealing temperatures, from 600 to 800 °C, and decreases above 800 °C. Preliminary cost-benefit analysis revealed that the profit margin of the proposed process flowsheet is promising. The wastewater is almost free of heavy metals. Our advances in high gold recovery and preparation of valuable magnetic nanocrystalline ferrite provide exciting opportunities to enhance and maximize Al Amar ore production for practical applications.