The Influence of Freeze-Dried Alcohol-Water Extracts from Common Yarrow (Achillea millefolium L.) and German Chamomile (Matricaria chamomilla L.) on the Properties of Elastomer Vulcanizates.

This research work aimed to investigate the properties of freeze-dried extracts from Matricaria chamomilla L. and Achillea millefolium L. and to perform a characterization of their impact on the natural rubber-based vulcanizates. First, extracts were prepared in three different solvents at selected volume ratios: water (100), water-methanol (50/50), and water-ethanol (50/50). Next, the freeze-drying of extracts was established and then obtained bio-additives were introduced to the rubber mixtures. Freeze-dried extracts were investigated by UV-VIS diffuse reflectance spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), Near-Infrared spectroscopy (NIR) and thermogravimetric analysis (TGA). Antioxidant activity and total phenolic content (TPC) were also defined. Rubber mixtures were examined in a rheometer and after vulcanization they were subjected to accelerated simulated aging by UV radiation and thermo-oxidative aging. To determine the resistance of vulcanizates to the degradation processes, the study of cross-linking density (equilibrium swelling method), mechanical properties (tensile strength, elongation at break) and color change were conducted. Performed studies proved the antioxidant activity of freeze-dried extracts caused by the high content of polyphenols and their beneficial influence on the properties of elastomer vulcanizates.

Potential Application of Peppermint (Mentha piperita L.), German Chamomile (Matricaria chamomilla L.) and Yarrow (Achillea millefolium L.) as Active Fillers in Natural Rubber Biocomposites.

In this study, peppermint (Mentha piperita L.), German chamomile (Matricaria chamomilla L.) and yarrow (Achillea millefolium L.) were applied as natural fibrous fillers to create biocomposites containing substances of plant origin. The purpose of the work was to investigate the activity and effectiveness of selected plants as a material for the modification of natural rubber composites. This research was the first approach to examine the usefulness of peppermint, German chamomile and yarrow in the field of polymer technology. Dried and ground plant particles were subjected to Fourier transmission infrared spectroscopy (FTIR) and UV-Vis spectroscopy, thermogravimetric analysis (TGA), goniometric measurements (contact angle) and scanning electron microscopy (SEM). The characterization of natural rubber composites filled with bio-additives was performed including rheometric measurements, FTIR, TGA, cross-linking density, mechanical properties and colour change after simulated aging processes. Composites filled with natural fillers showed improved barrier properties and mechanical strength. Moreover, an increase in the cross-linking density of the materials before and after the simulated aging processes, compared to the reference sample, was observed.

Influence of Material Degradation on Deformation of Paraglider during Flight.

The aim of this article is to determine experimentally and numerically the influence of material degradation on the deformation of a paraglider during flight. The presented method regards numerical modeling of pressure distribution over the wing and its effect on paraglider behavior; the considerations are preceded by experiments on three types of Polyamide 6.6 paraglider fabrics, subjected and not subjected to thermal, UV and flexing degradation. Scanning electron microscope (SEM) records allowed to determine the structural characteristics of the analyzed samples. Air permeability and mechanical tests are the input data for the computational simulations. When a pressure drop of 200 Pa is applied, all the analyzed samples are impermeable, except for those damaged by flexing. Thus, flexing damage has the greatest influence on the air permeability change among all considered aging factors. Aging caused by UV radiation has the greatest influence on mechanical properties. No major influence of thermal ageing on the mechanical properties of the considered samples is observed. Safety factors of the considered materials not subjected to degradation range between 3.94 and 6.00. Safety factor of fabric no. 1 subjected to the UV degradation is equal to 1.33; this result does not secure a safe usage of the considered material. The methodology described in this research can help to predict paraglider covering materials' behavior in flight; it assumes many cases, i.e., applying a new material or the material at any point of its life cycle. Thus, the practical implications of this model supported by numerical methods may result in saving time and cost in producing prototypes, as well as potentially assessing the safety of used wings. Future research activity can introduce the application of different elastic-plastic damage models to determine the paraglider behavior during collapse.

Antioxidant and Anti-Aging Activity of Freeze-Dried Alcohol-Water Extracts from Common Nettle (Urtica dioica L.) and Peppermint (Mentha piperita L.) in Elastomer Vulcanizates.

The research article aimed to examine the antioxidant nature of freeze-dried extracts from Urtica dioica L. and Mentha piperita L. and to present a deep characterization of their influence on the properties of natural rubber-based vulcanizates before and after simulated aging processes. Natural extracts were prepared in three solvent systems at selected volume ratios: water (100), methanol-water (50/50), ethanol-water (50/50), which were further lyophilized and used as additive to natural rubber mixtures. Freeze-dried materials were investigated by UV-VIS diffuse reflectance spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), thermal stability by thermogravimetric analysis (TGA). Antioxidant activity and total phenolic content (TPC) were also examined. Prepared samples were subjected to accelerated simulated degradation processes by using ultraviolet and thermo-oxidative aging. Vulcanizates resistance to degradation effects was determined by the study of cross-linking density (equilibrium swelling method), mechanical properties (tensile strength, elongation at break) and color change in comparison with the results of the reference samples. The research showed that analyzed extracts are characterized by a high content of polyphenols and antioxidant activity, thus have a protective influence on elastomer vulcanizates against damaging effects of aging processes, which consequently extends the lifetime of materials.

Experimental and Numerical Determination of Strength Characteristics Related to Paraglider Wing with Fourier Transform Infrared Spectroscopy of Applied Materials.

The aim of paper is to determine experimentally and numerically the strength characteristics related to the paraglider wing with Fourier transform infrared spectroscopy of applied materials. The applied method consists in theoretical modeling supplemented by the tests of material parameters. First, the set of 10 lightweight fabrics was selected for the tests; the samples are representative for these structures. The materials were tested using the spectroscopy to determine the FTIR spectra. The samples differ in the content of certain characteristic groups. Air permeability change of the materials was determined for the different pressure drops. The air permeability of almost all the analyzed samples was close to zero with the exception of only one material. The tensile strength and elongation at the break of samples were determined on the testing machine. The paraglider samples were characterized by slightly decreased mechanical properties compared to the parachute fabrics. The material characteristics determined during the tests are the input data for the theoretical analysis. The numerical model of the paraglider wing is based on a 3D geometry from previous research, but the stress, strain, and deformation were determined using the ANSYS Structural program and the finite elements method. To determine the strength correctly, we introduce two basic values: the absolute maximal and the representative values that are the biggest repetitive values of stress, strain, and deformation. The stress value was determined by the main factors: (i) the thinner the material, the bigger the stresses that were accumulated; (ii) the stronger the material, the bigger the stresses that were accumulated. The results are similar for all materials and differ mainly by the values. The biggest stresses were observed inside the material contacting the ribs, whereas the biggest deformation and strain were in the regions between ribs, and the smallest were in the contact areas with the fixed supports. Their highest intensity was observed on the leading edge of the paraglider. We conclude that the obtained stresses were far from the breaking level for the wing.

Common Nettle (Urtica dioica L.) as an Active Filler of Natural Rubber Biocomposites.

Common nettle (Urtíca Dióica L.), as a natural fibrous filler, may be part of the global trend of producing biocomposites with the addition of substances of plant origin. The aim of the work was to investigate and explain the effectiveness of common nettle as a source of active functional compounds for the modification of elastomer composites based on natural rubber. The conducted studies constitute a scientific novelty in the field of polymer technology, as there is no research on the physico-chemical characteristics of nettle bio-components and vulcanizates filled with them. Separation and mechanical modification of seeds, leaves, branches and roots of dried nettle were carried out. Characterization of the ground plant particles was performed using goniometric measurements (contact angle), Fourier transmission infrared spectroscopy (FTIR), themogravimetric analysis (TGA) and scanning electron microscopy (SEM). The obtained natural rubber composites with different bio-filler content were also tested in terms of rheological, static and dynamic mechanical properties, cross-linking density, color change and resistance to simulated aging processes. Composites with the addition of a filler obtained from nettle roots and stems showed the highest mechanical strength. For the sample containing leaves and branches, an increase in resistance to simulated ultraviolet and thermo-oxidative aging processes was observed. This phenomenon can be attributed to the activity of ingredients with high antioxidant potential contained in the plant.