Hindfoot Flexibility Influences the Biomechanical Effects of Laterally Wedged Insoles and Ankle-Foot Orthoses in Medial Knee Osteoarthritis.

OBJECTIVE: To investigate the relationship of frontal plane ankle mobility with the effects of an ankle-foot orthosis (AFO) and a laterally wedged insole (LWI) on knee adduction moment (KAM) in the treatment of medial knee osteoarthritis. DESIGN: Randomized, nonblinded crossover trial. SETTING: Outpatient clinic of university hospital. PARTICIPANTS: Referred sample of 20 patients (N=20) with medial knee osteoarthritis stage 1-3 (Kellgren and Lawrence), aged 56.4±6.5 years; 58 patients were assessed, 21 were included, and 1 was a dropout. There were 14 healthy reference participants without knee osteoarthritis (convenience sample) who were matched by age. INTERVENTIONS: Patients received AFO and LWI for 6 weeks each with gait analysis after each 6-week intervention. Patients underwent additional barefoot gait analysis, walking on even ground and on a cross slope of 5° lateral elevation and standing on inclinations of 0°, 5°, 10°, and 20°. MAIN OUTCOME MEASURES: Spearman correlation between the immediate change in first peak of KAM with each aid and the change in hindfoot varus on the cross slope relative to level ground. RESULTS: The KAM reduction with AFO correlated significantly with hindfoot varus reaction to the cross slope during walking: the greater the hindfoot valgization on the cross slope, the greater the KAM reduction with AFO (Spearman ρ=0.53, P=.02). The KAM reduction with LWI correlated moderately negatively with the change in hindfoot varus: the greater the hindfoot valgization on the cross slope, the smaller the KAM reduction with LWI (r=-0.31 P=.18). CONCLUSIONS: LWI may be suitable for patients with limited to normal frontal plane ankle mobility. Patients with greater frontal plane ankle mobility benefit most from frontal plane ankle bridging with AFO. Studies with larger samples are necessary.

A comparison between laterally wedged insoles and ankle-foot orthoses for the treatment of medial osteoarthritis of the knee: A randomized cross-over trial.

OBJECTIVE: To compare biomechanical and clinical outcome of laterally wedged insoles (LWI) and an ankle-foot orthosis (AFO) in patients with medial knee osteoarthritis. DESIGN: Single-centre, block-randomized, cross-over controlled trial. SETTING: Outpatient clinic. SUBJECTS: About 39 patients with symptomatic medial knee osteoarthritis. INTERVENTIONS: Patients started with either LWI or AFO, determined randomly, and six weeks later changed to the alternative. MAIN MEASURES: Change in the 1st maximum of external knee adduction moment (eKAM) was assessed with gait analysis. Additional outcomes were other kinetic and kinematic changes and the patient-reported outcomes EQ-5D-5L, Oxford Knee Score (OKS), American Knee Society Clinical Rating System (AKSS), Hannover Functional Ability Questionnaire - Osteoarthritis and knee pain. RESULTS: Mean age (SD) of the study population was 58 (8) years, mean BMI 30 (5). Both aids significantly improved OKS (LWI P = 0.003, AFO P = 0.001), AKSS Knee Score (LWI P = 0.01, AFO P = 0.004) and EQ-5D-5L Index (LWI P = 0.001, AFO P = 0.002). AFO reduced the 1st maximum of eKAM by 18% (P < 0.001). The LWI reduced both maxima by 6% (P = 0.02, P = 0.03). Both AFO and LWI reduced the knee adduction angular impulse (KAAI) by 11% (P < 0.001) and 5% (P = 0.05) respectively. The eKAM (1st maximum) and KAAI reduction was significantly larger with AFO than with LWI (P = 0.001, P = 0.004). CONCLUSIONS: AFO reduces medial knee load more than LWI. Nevertheless, no clinical superiority of either of the two aids could be shown.

Comparison of pancreatic respiratory motion management with three abdominal corsets for particle radiation therapy: Case study.

BACKGROUND AND PURPOSE: Abdominal organ motion seriously compromises the targeting accuracy for particle therapy in patients with pancreatic adenocarcinoma. This study compares three different abdominal corsets regarding their ability to reduce pancreatic motion and their potential usability in particle therapy. MATERIALS AND METHODS: A patient-individualized polyurethane (PU), a semi-individualized polyethylene (PE), and a patient-individualized three-dimensional-scan based polyethylene (3D-PE) corset were manufactured for one healthy volunteer. Time-resolved volumetric four-dimensional-magnetic resonance imaging (4D-MRI) and single-slice two-dimensional (2D) cine-MRI scans were acquired on two consecutive days to compare free-breathing motion patterns with and without corsets. The corset material properties, such as thickness variance, material homogeneity in Hounsfield units (HU) on computed tomography (CT) scans, and manufacturing features were compared. The water equivalent ratio (WER) of corset material samples was measured using a multi-layer ionization chamber for proton energies of 150 and 200 MeV. RESULTS: All corsets reduced the pancreatic motion on average by 9.6 mm in inferior-superior and by 3.2 mm in anterior-posterior direction. With corset, the breathing frequency was approximately doubled and the day-to-day motion variations were reduced. The WER measurements showed an average value of 0.993 and 0.956 for the PE and 3DPE corset, respectively, and of 0.298 for the PU corset. The PE and 3DPE corsets showed a constant thickness of 2.8 ± 0.2 and 3.8 ± 0.2 mm, respectively and a homogeneous material composition with a standard deviation (SD) of 31 and 32 HU, respectively. The PU corset showed a variable thickness of 4.2 - 25.6 mm and a heterogeneous structure with air inclusions with an SD of 113 HU. CONCLUSION: Abdominal corsets may be effective devices to reduce pancreatic motion. For particle therapy, PE-based corsets are preferred over PU-based corset due to their material homogeneity and constant thickness.

Biomechanical comparison of a 3D-printed prosthetic foot with conventional feet in people with transtibial amputation: A prospective cohort study.

INTRODUCTION: The method of 3D printing is increasingly gaining utilization in clinical applications and may support prosthetic fitting. The aim was to compare biomechanical outcomes of people with a transtibial amputation using a novel, individualizable, 3D-printed prosthetic foot (ComfyStep, Mecuris) with two conventional, widely used prosthetic feet during level ground walking using a 3D motion analysis system. METHODS: Ten individuals with an unilateral transtibial amputation were fitted with 3 prosthetic feet (ComfyStep, Assure/Össur, DynamicMotion/Ottobock) using their current, well-fitting socket. They had at least 1 week of familiarization for each foot before gait analyses were conducted. Kinematics and kinetics as well as roll over shape (ROS) length and radius were calculated and compared between feet. RESULTS: The sound side gait parameters of the participants were comparable when using different feet. However, there were differences on the affected side. The statistical analysis revealed that the 3D-printed foot differed significantly compared with the conventional feet in the following aspects: reduced range of motion, increased plantar flexion moment, reduced plantar flexion power, larger ROS radius, less favorable energy ratio, and higher overall stiffness. CONCLUSION: In principle, 3D-printed feet have advantages over conventional "off the shelf" feet, as their biomechanical characteristics could be adjusted more in detail according to the patient needs. Although, differences between conventional feet and the ComfyStep were shown. Whether these differences have a negative clinically relevant effect remains unclear. However, results suggest that commercially available 3D-printed feet should incorporate systematically better adjustments, for example, for stiffness, to enhance prosthetic performance.

[Motion analysis in lower limb exoprosthetics-possibilities and limitations]. / Die Bewegungsanalyse in der Exoprothetik der unteren Extremität ­ Möglichkeiten und Grenzen.

BACKGROUND: Gait analysis is of high relevance in prosthetics as it is an essential part of the fitting process. The documentation of movement by means of videos and instrumented methods is becoming increasingly important in prosthetics as benefits of a complex prosthesis can best be shown by structured observation. PROCEDURE: A movement analysis should always be preceded by an anamnesis and clinical examination in order to detect functional limitations of the examined person and thus to establish correlations to gait deviations. Additionally, the orthopaedic aid should be evaluated as well. In addition to walking on level ground, walking on everyday obstacles such as stairs and ramps is also of interest when observing people using prosthetic limbs. Functional tests can be used to determine the functional status more comprehensively. An instrumental-3D gait analysis is indicated for specific questions, especially regarding kinetic parameters.

[Possibilities of orthopedic technical care for extremity lengthening and reconstruction]. / Möglichkeiten der orthopädietechnischen Versorgung für die Extremitätenverlängerung und -rekonstruktion.

BACKGROUND: Orthopedic technical care plays a crucial role in improving function and mobility for patients undergoing limb lengthening and reconstruction. The treatment strategy is based on a precise classification of the defect, taking into account factors such as joint instability, muscle pathology and limb length discrepancy. CHOICE OF AIDS: The selection of orthopedic aids depends on the specific deformity, its classification and the individual needs of the patient. Through interdisciplinary decision-making and customized adaptations of prostheses and orthoses, optimal function and aesthetically pleasing outcomes can be achieved. The utilization of custom-made technical components, such as traction devices combined with elastic liners, is essential for long-term treatment success and can support surgical interventions. The treating physician's expertise is crucial in selecting the appropriate orthopedic technical device following limb lengthening and reconstruction.

Lower-Limb Amputation in Children and Adolescents-A Rare Encounter with Unique and Special Challenges.

BACKGROUND/AIM: The pattern of lower-limb amputation, indications, complications, and revision in pediatric cases differs globally. Therefore, we conducted this study to describe the patterns of lower-limb amputation at our institution. METHODS: During a set period between 2010 and 2020, adolescent patients undergoing lower-limb amputation within the orthopedic department of Heidelberg University Hospital were retrospectively collected and analyzed. The retrieved dataset included two parts: data on lower-limb amputations and data on subsequent complications and revision surgeries at the same time. Besides patients' general information (age, gender), the dataset included data regarding amputation patterns (number, indications, and level of amputation, complications, and revision surgeries and their indications). RESULTS: Twenty-two patients undergoing lower-limb amputation were examined, of which the majority were males (63.6%) with a mean age of 12 (5.1) years. Tumor was the most common indication for amputation (72.7%), and transfemoral amputation was the most frequent level (68.2%). Complications occurred in 10 patients, mostly due to stump impalement or bony overgrowth. Of all recorded patients requiring revision, nine were regarding bone and one case regarding soft tissue. CONCLUSIONS: Lower-limb amputation in adolescents is a rare encounter and it is commonly indicated due to bone tumors. The thigh is the most common level of amputation. Postoperative complications are frequent, mainly secondary to bony overgrowth, and often require revision surgery.

Varus Knee Limits Pain Relief Effects of Laterally Wedged Insoles and Ankle-Foot Orthoses in Medial Knee Osteoarthritis.

OBJECTIVE: To investigate the impact of varus malalignment of the knee on pain reduction achieved by an ankle-foot orthosis and a laterally wedged insole in patients with medial knee osteoarthritis. DESIGN: Secondary analysis of a randomized, clinically prospective cross-over study. PATIENTS: Twenty-eight participants with medial knee osteoarthritis. METHODS: All participants wore a 5-mm laterally wedged insole and an ankle-foot orthosis for a period of 6 weeks each in a randomized order. Pain was reported on a numerical rating scale and was correlated with limb alignment, as defined by the mechanical axis deviation in full-leg standing radiographs. RESULTS: Insole and orthosis use reduced pain compared with baseline (median knee pain change: insole -0.5 (-5 to +6), orthosis -1.5 (-7 to +5). A higher mechanical axis deviation (greater varus) correlated significantly with smaller pain reduction for both aids (insole p = 0.003, orthosis p < 0.001). A cut-off to predict pain response was found at a mechanical axis deviation of 14-15 mm for both aids, i.e. > 3° knee varus. CONCLUSION: There is a correlation between varus malalignment and pain reduction. There seems to be a mechanical axis deviation cut-off that predicts the response to treatment with the aids with good sensitivity.

Validation of a new Equinometer device for measuring ankle range of motion in patients with cerebral palsy: An observational study.

ABSTRACT: The goniometer is the gold-standard measurement tool of ankle range of motion (ROM). However, several studies have questioned its inter- and intra-rater reliability. Therefore, we conducted this validation study to assess the reliability of a different tool, named Equinometer, as a measurement device of ankle ROM in addition to comparing the reproducibility of their results.Sixteen healthy individuals were included. They underwent both goniometer and Equinometer measurements in knee extension and 90° knee flexion (Silfverskjöld Test). Three raters reported the values of dorsiflexion (DF) and plantarflexion (PF) in each session using both measurement tools. Intra-rater reliability was assessed between 2 raters on another study group of 24 participants. Intraclass correlation coefficients were used to determine the reliability of the used device.The age of study subjects ranged from 22 to 85 years. Fifty percent were males, and the right ankle joint was the most examined side (68.75%). In terms of DF and PF during knee extension and flexion, our analysis revealed that the measurements recorded by the Equinometer were equivalent to the goniometer. Of note, the intra-rater reliability of the Equinometer was excellent for both DF and PF assessment during both knee flexion and extension (Intraclass correlation coefficient ranged from 0.90 to 0.98), with minimal mean differences from goniometer measurements. Subgroup analysis based on age did not reveal any significant differences (P > .05).Given the high intra-rater correlations of the Equinometer, we suggest that it is reliable and precise in recording ankle ROM in outpatient clinics, particularly to obtain reproductive, comparable and unbiased data from different observers.

Radiological Outcomes of Femoral Head Resection in Patients with Cerebral Palsy: A Retrospective Comparative Study of Two Surgical Procedures.

BACKGROUND: We conducted this study to compare postoperative radiological outcomes of two surgical procedures (femoral head resection (FHR) and femoral head cap plastic surgery (FCP)) in patients with CP and hip dislocation. METHODS: CP patients with Gross Motor Function Classification Score (GMFCS) IV or V, who underwent either FHR or FCP between 2007 and 2018 at Heidelberg University Hospital in Germany, were included. Most participants underwent postoperative traction in an attempt to prevent telescoping. Besides the above-mentioned objectives, we examined the association between telescoping and spasmolytic use, traction weight, and traction duration. RESULTS: Thirty-eight CP patients were included, of whom 15 (25 hips) underwent FHR and 23 (30 hips) underwent FCP. Heterotopic ossification (grades I, II, and III) occurred in 80% and 83.3% of patients in the FHR and FCP groups, respectively. Telescoping occurred in 18.68 and 31.99% of patients in the FHR and FCP groups, respectively (p = 0.999). Other complications were similar between both groups. CONCLUSIONS: The postoperative outcomes of FHR and FCP are similar in terms of telescoping, heterotopic ossification, and complications. Although telescoping was encountered more in the FCP group, no significant difference from the FHR group was found. We noted that the weight of traction could reduce the development of telescoping.

The influence of hip muscle strength on gait in individuals with a unilateral transfemoral amputation.

INTRODUCTION: A unilateral transfemoral amputation (TFA) has a major impact on function. A leg-length discrepancy is the primary structural change, accompanied by the loss of lower-limb muscle volume and function. Prostheses can help individuals with a TFA to regain function, but such individuals still do not reach the functional level of unimpaired peers and exhibit gait deviations. This study gives insight into the causality between residual limb strength and gait deviations in individuals with a TFA. METHODS: A convenient sample of 13 male individuals with a TFA (38.0 ± 12.6y; 179.7cm ± 6.5cm; 82.9kg ± 12.4kg) was recruited for this study. One participant with TFA was excluded, as he differed from the rest of the cohort, in residual limb length and the use of walking aids. A cohort of 18 unimpaired subjects served as a reference group (REF; nine females; 44y ± 13y; 174cm ± 9cm; 71kg ± 12kg). All participants underwent a conventional clinical gait analysis using a marker based 3D motion capture system and force platforms. Kinematics and kinetics were determined utilizing standard modelling methods. All subjects underwent a strength test, using a custom-made device to determine isometric moments of the hip joint in abduction, adduction, extension, and flexion. Peak values for maximum isometric moments for each movement direction and selected kinematic and kinetic values were derived from the results. Differences between subjects with TFA and unimpaired were compared using a Mann-Whitney U Test and associations between groups by Spearman's rank correlation. RESULTS: The participants with a TFA showed a significantly lower maximum isometric moment for hip abduction (0.85 vs. 1.41 Nm/kg p < .001), adduction (0.87 vs. 1.37 Nm/kg p = .001) and flexion (0.93 vs. 1.63 Nm/kg p = .010) compared to the reference group. Typically reported gait deviations in people with a TFA were identified, i.e. significant lower cadence and increased step width. We further identified altered coronal plane hip and trunk kinematics, with significantly higher ranges of motion during involved side stance-phase. Gait kinetics of individuals with a TFA showed significantly lower peak values during stance for hip abduction, adduction and extension moments in comparison to the reference group. We identified a moderate negative correlation between maximum isometric moment for hip abduction and trunk obliquity range of motion (ρ = -0.45) for participants with a TFA, which was not significant (p = 0.14). CONCLUSION: We showed that there are strength deficits in individuals with TFA and, that there are moderate correlations between gait deviations, i.e. lateral trunk lean during involved side stance and isometric hip abductor moment. The relation between maximum moments during gait and the corresponding maximum isometric moment may therefore be helpful to detect strength related compensation mechanisms. However, the moderate, non-significant correlation between lateral trunk lean and isometric hip abductor moment was the only one which corresponded directly to a gait deviation. Thus results must be interpreted with care. This study suggests that gait deviations in individuals with TFA are multifactorial and cannot be exclusively explained by their strength deficits. Future studies should explore the relationship between strength with kinematics and kinetics during gait in this population.

Dynamic assist by carbon fiber spring AFOs for patients with myelomeningocele.

Patients with calf muscle insufficiency and a calcaneus gait are often dependent on ankle-foot orthoses (AFO). The orthosis is intended to improve walking and posture and should prevent structural deformities. AFOs are often manufactured with a dorsiflexion stop. The design of this type of orthosis has been investigated in several previous studies. In the current study, orthoses with a dorsal carbon fiber spring were compared with the classic design. Five patients with Spina Bifida took part in the current study. All participants underwent a 3D gait analysis including kinematic (VICON infrared cameras) and kinetic (Kistler force plates) data collection. The measurements showed that the carbon spring was able to support the patient during the complete stance phase. It was found that the use of a carbon fiber spring significantly increases the energy return during the 3rd rocker, simulating the natural push-off action (p<0.05). Via a simple mechanical test, the contribution of the carbon spring to the overall kinetics could be estimated proving that the spring does assist the patient for push-off. The more physiological ankle and knee kinematics implies a functional improvement from the carbon springs compared to classic orthosis. This investigation showed, further, that in the fitting process a neutral alignment with the shoe wear has to be carefully checked since the spring kinematics and kinetics during stance phase were influenced significantly by the alignment. Further studies are needed to assess the clinical outcome and to prove the functional benefit of this kind of orthosis.

Benefits of an increased prosthetic ankle range of motion for individuals with a trans-tibial amputation walking with a new prosthetic foot.

BACKGROUND: Individuals with trans-tibial amputation show a greater peak prosthetic ankle power (push- off) when using energy storing and returning (ESAR) prosthetic feet as compared to solid-ankle cushion-heel feet. ESAR feet further contribute to the users' body support and thus limit prosthetic ankle motion. To improve ankle motion, articulating prosthetic feet have been introduced. However, articulating feet may diminish push-off. RESEARCH QUESTION: Does a novel prosthetic foot, with a serial layout of carbon fibre leaf springs, connected by a multi-centre joint construction, have advantages in kinematics and kinetics over a conventional ESAR prosthetic foot?> METHODS: Eleven individuals with unilateral trans-tibial amputation were fitted with the novel foot (NF) and a conventional ESAR Foot (CF) and underwent 3D gait analysis. As an additional power estimate of the prosthetic ankle, a unified, deformable, segment model approach was applied. Eleven matched individuals without impairments served as a reference. RESULTS: The NF shows an effective prosthetic ankle range of motion that is closer to a physiologic ankle range of motion, at 31.6° as compared to 15.2° with CF (CF vs. NF p = 0.003/NF vs. Reference p = 0.171) without reducing the maximum prosthetic ankle joint moment. Furthermore, the NF showed a great increase in prosthetic ankle power (NF 2.89 W/kg vs. CF 1.48 W/kg CF vs. NF p = <0.001) and a reduction of 19% in the peak knee varus moment and 13% in vertical ground reaction forces on the sound side for NF in comparison to CF. SIGNIFICANCE: The NF shows that serial carbon fibre leaf springs, connected by a multi-centre joint construction gives a larger ankle joint range of motion and higher ankle power than a conventional carbon fibre structure alone. Consequently load is taken off the contralateral limb, as measured by the decrease in vertical ground reaction forces and peak knee varus moment.

Sound side joint contact forces in below knee amputee gait with an ESAR prosthetic foot.

The incidence of knee and hip joint osteoarthritis in subjects with below knee amputation (BK) appears significantly higher compared to unimpaired subjects, especially in the intact side. However, it is controversial if constant higher loads on the sound side are one of the major factors for an increased osteoarthritis (OA) incidence in subjects with BK, beside other risk factors, e.g. with respect to metabolism. The aim wasto investigate joint contact forces (JCF) calculated by a musculoskeletal model in the intact side and to compare it with those of unimpaired subjects and to further elucidate in how far increased knee JCF are associated with increased frontal plane knee moments. A group of seven subjects with BK amputation and a group of ten unimpaired subjects were recruited for this study. Gait data were measured by 3D motion capture and force plates. OpenSim software was applied to calculate JCF. Maximum joint angles, ground reaction forces, and moments as well as time distance parameters were determined and compared between groups showing no significant differences, with some JCF components of knee and hip even being slightly smaller in subjects with BK compared to the reference group. This positive finding may be due to the selected ESAR foot. However, other beneficial factors may also have influenced this positive result such as the general good health status of the subjects or the thorough and proper fitting and alignment of the prosthesis.

Functional effects of a prosthetic torsion adapter in trans-tibial amputees during unplanned spin and step turns.

BACKGROUND: Shear stress at the stump in trans-tibial amputees induced by turning movements may be reduced with the use of torsion adapters in the prosthesis. OBJECTIVE: Monitoring the motion and kinetic effects of a regular torsion adapter in comparison to a rigid placebo in unplanned spin and step turns. STUDY DESIGN: Single-blinded placebo-controlled cohort study. METHODS: In total, 10 trans-tibial amputees underwent three-dimensional gait analysis in level walking and unplanned spin and step turns with a torsion adapter and with a rigid placebo. RESULTS: Kinetic effects varied among participants. No statistically significant reduction of peak internal and peak external transverse plane moments was found for the torsion adapter in any walking condition. However, transverse plane rotation of the adapter was monitored in all participants. CONCLUSION: Motion between the socket and the residual limb may be reduced during turns due to transverse plane motion of the torsion adapter and shear stress on the residual limb may be reduced. However, there may be good and bad responders to torsion adapters due to differences in coupling between the residual limb and the socket. CLINICAL RELEVANCE: Strong coupling between stump and socket will help the user controlling his prosthesis. Shear stress at the stump may increase in stump-socket interface stiffness and may be the reason for residual limb problems. Torsion adapters therefore may be beneficial for comfort and stump condition in individual cases.

Proceedings of the first workshop on Peripheral Machine Interfaces: going beyond traditional surface electromyography.

One of the hottest topics in rehabilitation robotics is that of proper control of prosthetic devices. Despite decades of research, the state of the art is dramatically behind the expectations. To shed light on this issue, in June, 2013 the first international workshop on Present and future of non-invasive peripheral nervous system (PNS)-Machine Interfaces (MI; PMI) was convened, hosted by the International Conference on Rehabilitation Robotics. The keyword PMI has been selected to denote human-machine interfaces targeted at the limb-deficient, mainly upper-limb amputees, dealing with signals gathered from the PNS in a non-invasive way, that is, from the surface of the residuum. The workshop was intended to provide an overview of the state of the art and future perspectives of such interfaces; this paper represents is a collection of opinions expressed by each and every researcher/group involved in it.

Integrating strength tests of amputees within the protocol of conventional clinical gait analysis: a novel approach.

Clinical experience tells us that the lower-limb amputees are one of the patient groups who clearly suffer from a strength deficit in their involved side. However, there is no obvious evidence for the relation between the residual limb strength and walking ability in this population. Correlating the results of the conventional clinical gait analysis (CGA) with strength tests could help to find out how deficits in strength impact the amputees' gait. In this contribution, a new device for measuring the isometric muscle strength of the hip and the knee was tested for feasibility. Three groups were tested: one group of 11 healthy subjects (29±5 years) to test the repeatability of the device, two unilateral amputees (one transfemoral for 56 years, one transtibial for 65 years), and a reference group of 17 healthy subjects (55±10 years). The new method presents an adequate technique to integrate strength testing within a standard protocol of the CGA. Results showed to be repeatable within sessions [i.e., within-day, intraclass correlation coefficient (ICC)>0.972] and between repeated measurements (i.e., day-to-day, ICC>0.765). The tested amputees showed clear deficits in maximum isometric joint moments in their most distal joint. The first results suggest evidence for a relation between the maximum isometric joint moments and gait deviations in amputees.

Biomechanical analysis of ramp ambulation of transtibial amputees with an adaptive ankle foot system.

The fixed neutral position of conventional prosthetic feet causes difficulties for transtibial amputees (TTAs) when walking on ramps. New microprocessor-controlled prosthetic ankles such as the Proprio-Foot (Ossur) aim to reduce these difficulties by modifying the prosthetic ankle angle according to the gait condition. The purpose of the present investigation was to assess the biomechanical effects of adaptation of the prosthetic ankle on ramp ambulation in TTAs. Sixteen TTAs and 16 controls underwent a conventional 3D gait analysis while walking up and down a ramp. TTAs walked with the prosthetic foot set to a neutral mode angle and set to the adapted mode. Norm distance, sagittal kinematics and kinetics were calculated for comparisons between TTAs and controls. During ramp ascent, the dorsiflexion brought about by the adapted prosthetic ankle reduced the increased knee extension noted on the TTAs' involved side and the increased plantarflexion on their sound side. During ramp descent, the plantarflexion of the adapted mode increased the adaptation mechanisms observed in TTAs. These findings suggest that the adapted mode leads to more physiologic kinematics and kinetics in the lower limbs in TTAs during ramp ascent but not during ramp descent. However, in the adapted mode, patients reported feeling safer during ramp descent, thus indicating that there might be other safety related measures such as toe-clearance or coefficient of friction influencing this perception.

Kinematics and kinetics with an adaptive ankle foot system during stair ambulation of transtibial amputees.

Conventional prosthetic feet cannot adapt to specific conditions such as walking on stairs or ramps. Amputees are therefore forced to compensate their prosthetic deficits by modifying the kinematics and kinetics of their lower limbs. The Proprio-Foot (Ossur) intends to reduce these compensation mechanisms by automatically increasing dorsiflexion during stair ambulation thanks to an adaptive microprocessor-controlled ankle. The present investigation proposes to analyze the biomechanical effects of the dorsiflexion adaptation in transtibial (TT) amputees during stair ambulation. Sixteen TT amputees and sixteen healthy controls underwent conventional 3D gait analysis. Kinematics and kinetics of the lower limbs were compared during stair ascent and descent performed by patients with the prosthetic foot set to a neutral ankle angle and with an adapted dorsiflexion ankle angle of 4 degrees . Norm distance as well as minimum and maximal values of sagittal kinematics and kinetics were calculated for comparisons between patients and control subjects. For both stair ascent and descent, an improvement of the knee kinematics and kinetics could particularly be noticed on the involved side with an increase of the knee flexion and an increase of the knee moment during stance. Therefore, despite its additional weight compared to a conventional prosthetic ankle, the Proprio-Foot should be beneficial to active TT amputees whose knee musculature strength does not constitute a handicap.