Validation of a Minor Modification to the Soleris® Direct Yeast and Mold Vial and Selective Supplement.

Here we describe results of a study to validate minor reagent formulation changes to the Soleris Direct Yeast and Mold (DYM) automated growth-based method for semi-quantitative detection of yeast and mold in food products. In order to reduce the maximum concentration of the selective agent chloramphenicol in the Soleris reagents, chloramphenicol was removed from the selective supplement and added to the vial growth medium itself. Therefore, both the vial medium and supplement have been reformulated in an alternative version of the method. A probability of detection (POD) statistical model was used to compare Soleris results at multiple test thresholds (dilutions) with plate counts determined using the U.S. Food and Drug Administration Bacteriological Analytical Manual dilution plating procedure. Three matrixes were tested; yogurt, tomato juice, and cocoa powder. POD analysis showed that the percentage of positive Soleris tests at various test thresholds were within the limits predicted by the reference method plate counts for all matrixes evaluated. Real-time stability data on three manufactured lots showed that the modified Soleris vial and supplement are stable for at a minimum of 10 months when stored at 2-8°C. In sum, results presented here demonstrate that the modifications to the Soleris DYM vial and supplement do not impact method performance. The modified Soleris DYM method can be used as an accurate alternative to conventional dilution plating procedures for semi-quantitative determination of yeast and mold at threshold levels, while saving as much as 3 days in analysis time.

Validation of Modifications to the ANSR® Salmonella Method for Improved Ease of Use.

This paper describes the results of a study to validate minor reagent formulation and procedural changes to the ANSR® Salmonella method, AOAC Performance Tested Method™ 061203. In order to improve ease of use and diminish risk of amplicon contamination, the lyophilized reagent components were reformulated for increased solubility, thus eliminating the need to mix by pipetting. In the alternative procedure, an aliquot of the lysate is added to lyophilized ANSR reagents, immediately capped, and briefly mixed by vortex. Results of the validation study with ice cream, peanut butter, dry dog food, raw ground turkey, raw ground beef, and sponge samples from a stainless steel surface showed no statistically significant differences in performance between the ANSR method and the U.S. Food and Drug Administration Bacteriological Analytical Manual or U.S. Department of Agriculture-Food Safety and Inspection Services Microbiology Laboratory Guidebook reference culture procedures. Results of inclusivity and exclusivity testing were unchanged from those of the original validation study; exclusivity was 100% and inclusivity was 99.1% with only a single strain of Salmonella Weslaco testing negative. Robustness testing was also conducted, with variations to lysis buffer volume, lysis time, and sample volume having no demonstrable effect on assay results.

Validation of the NeoFilm for Yeast and Mold Method for Enumeration of Yeasts and Molds in Select Foods.

NeoFilm Yeast and Mold (Y&M), also known as Sanita-kun Yeasts and Molds, is a simple, effective device used for the enumeration of yeasts and molds. It consists of a nonwoven fabric on which a layer of microbial nutrients is deposited in a film. A 1 mL sample homogenate is applied to the membrane and this, in turn, is incubated for 48-72 h at 25°C. Sample homogenates were prepared using two different diluents for customer convenience: phosphate buffered saline (PBS) and 0.1% peptone water. In comparative testing of breaded chicken nuggets, dry pet food, orange juice concentrate, yogurt, and cake mix, there were statistically significant differences in the counts obtained by the NeoFilm Y&M and U.S. Food and Drug Administration Bacteriological Analytical Manual reference culture methods only in the following instances: medium level for orange juice with PBS as diluent and low level for pet food with 0.1% peptone water as diluent, where reference method counts were higher than those of NeoFilm; medium level for cake mix with PBS, and low and medium levels for cake mix with 0.1% peptone water, where NeoFilm produced higher counts than the reference method. In addition to the method comparison study with five matrixes, robustness and stability/lot-to-lot testing were also performed. Results of robustness testing showed no significant effect on results even with perturbation to three assay parameters simultaneously. Results of testing of three lots of devices ranging in age from 2 to 26 months post-manufacture showed no significant differences in performance.

Validation of the ANSR® Listeria Method for Detection of Listeria spp. in Selected Foods.

ANSR® Listeria was previously certified as Performance Tested Method(SM) 101202 for detection of Listeria spp. on selected environmental surfaces. This study proposes a matrix extension to the method for detection of Listeria spp. in selected food matrixes. The method is an isothermal nucleic acid amplification assay based on the nicking enzyme amplification reaction technology. Following single-step sample enrichment for 16-24 h, the assay is completed in less than 50 min, requiring only simple instrumentation. Inclusivity testing was performed using a panel of 51 strains of Listeria spp., representing the species L. grayi, L. innocua, L. ivanovii, L. monocytogenes, L. seeligeri, and L. welshimeri. All strains tested were detected by the ANSR assay. Exclusivity testing of 30 strains representing non-Listeria Gram-positive bacteria yielded no evidence of cross-reactivity. Performance of the ANSR method for detection of Listeria spp. was compared to that of reference culture procedures for pasteurized liquid egg, pasteurized 2% milk, Mexican-style cheese, ice cream, smoked salmon, lettuce, cantaloupe, and guacamole. Data obtained in these unpaired studies and analyzed using a probability of detection model demonstrated that there were no statistically significant differences in results between the ANSR and reference culture methods, except for milk at 16 h and cantaloupe. In milk and smoked salmon, ANSR sensitivity was low at 16 h and therefore the recommended incubation time is 24 h. In cantaloupe, ANSR was found to be more sensitive than the reference culture method at both 16 and 24 h in independent laboratory testing. The ANSR Listeria method can be used as an accurate, rapid, and simple alternative to standard culture methods for detection of Listeria spp. in selected food types.

Validation of the Soleris direct yeast and mold method for semiquantitative determination of yeast and mold in a variety of foods.

A study was carried out to determine the efficacy of the Soleris Direct Yeast and Mold (DYM) automated growth-based method for semiquantitative detection of yeast and mold in a variety of food products. A probability of detection (POD) statistical model was used to compare Soleris results at multiple test thresholds (dilutions) with plate counts determined using the U.S. Food and Drug Administration Bacteriological Analytical Manual, Chapter 18, dilution plating procedure. Fourteen naturally contaminated food products were tested, with Soleris testing performed at three or more threshold levels for each food. Using the POD model, the majority of Soleris test results were in statistical agreement with the reference plating procedures. The exceptions included a single threshold level in yogurt, black pepper, dried fruit, and dry pet food, and two levels in nonfat dry milk and saw palmetto powder. In all but one of these instances, the exception being pet food, the statistical disagreement was due to Soleris estimating a higher level of contamination than the reference method. Results of ruggedness testing showed that the Soleris method produced accurate results even when significant variances in a critical operating parameter, incubation temperature, were introduced. Results of the internal and independent laboratory validation studies showed that the Soleris DYM method can be used as an accurate alternative to conventional dilution plating procedures for evaluation of yeast and mold counts at threshold levels, while saving as much as 72 h in analysis time.

Validation of the ANSR Salmonella method for detection of Salmonella spp. in a variety of foods. Performance Tested Method 061203.

This study represents a proposal to extend the matrix claims for the ANSR Salmonella test, Performance Tested Method 061203. The test is based on the nicking enzyme amplification reaction (NEAR) isothermal nucleic acid amplification technology. The assay platform features simple instrumentation, minimal labor, and following a single-step 16-24 h enrichment (depending on sample type), an extremely short assay time of 30 min including sample preparation. Detection is real-time using fluorescent molecular beacon probes. ANSR Salmonella was originally validated for detection of Salmonella spp. in chicken carcass rinse, raw ground turkey, raw ground beef, hot dogs, and oat cereal, and on stainless steel, plastic, sealed concrete, ceramic tile, and rubber surfaces. The matrixes tested in this study include pet food, ice cream, soy flour, raw almonds, peanut butter, spinach, black pepper, raw frozen shrimp, cocoa powder, and pasteurized dried egg. In unpaired comparative testing there were no statistically significant differences in the number of positive results obtained with the ANSR and the reference culture methods. Enrichment for 16 h was effective for all commodities tested except ice cream, black pepper, dried pasteurized egg, and 375 g samples of dry pet food, for which enrichment for 24 h is indicated.

Validation of the Soleris NF-TVC method for determination of total viable count in a variety of foods.

A study was conducted to determine the efficacy of the Soleris Non-fermenting-Total Viable Count (NF-TVC) automated growth-based method for semiquantitative detection of mesophilic, aerobic microorganisms in a variety of food products. A probability of detection (POD) statistical model was used to compare Soleris results at multiple test thresholds (dilutions) with aerobic plate counts determined using reference dilution plating procedures. Nine naturally contaminated food products were tested, with Soleris testing performed at three or four threshold levels for each food. Using the POD model, all Soleris test results were in statistical agreement with the reference plating procedures with the exception of a single threshold level in two trials with black pepper, and a single threshold level in the independent laboratory trial with cheesecake. Results of ruggedness testing showed that the Soleris method produced accurate results even when minor variances in operating parameters, including sample volume and incubation temperature, were introduced. Results of the internal and independent laboratory validation studies showed that the Soleris NF-TVC method can be used as an accurate alternative to conventional dilution plating procedures for evaluation of microbial counts at threshold levels, while saving 24 h or more in analysis time.

Validation of the ANSR Salmonella method for detection of Salmonella spp. in selected foods and environmental samples.

ANSR Salmonella is a new molecular diagnostic assay for detection of Salmonella spp. in foods and environmental samples. The test is based on the nicking enzyme amplification reaction (NEAR) isothermal nucleic acid amplification technology. The assay platform features simple instrumentation, minimal labor, and, following a single-step 10-24 h enrichment (depending on sample type), an extremely short assay time of 30 min, including sample preparation. Detection is real-time using fluorescent molecular beacon probes. Inclusivity testing was performed using a panel of 113 strains of S. enterica and S. bongori, representing 109 serovars and all genetic subgroups. With the single exception of the rare serovar S. Weslaco, all serovars and genetic subgroups were detected. Exclusivity testing of 38 non-salmonellae, mostly Enterobacteriaceae, yielded no evidence of cross-reactivity. In comparative testing of chicken carcass rinse, raw ground turkey, raw ground beef, hot dogs, and oat cereal, there were no statistically significant differences in the number of positive results obtained with the ANSR and the U.S. Department of Agriculture-Food Safety and Inspection Service or U.S. Food and Drug Administration/Bacteriological Analytical Manual reference culture methods. In testing of swab or sponge samples from five different environmental surfaces, four trials showed no statistically significant differences in the number of positive results by the ANSR and the U.S. Food and Drug Administration/ Bacteriological Analytical Manual reference methods; in the trial with stainless steel surface, there were significantly more positive results by the ANSR method. Ruggedness experiments showed a high degree of assay robustness when deviations in reagent volumes and incubation times were introduced.

Validation of the Soleris E. coli method for detection and semi-quantitative determination of Escherichia coli in foods.

The performance of the Soleris E. coli method was compared with that of the ISO 7251 most probable number (MPN) and detection reference methods for Escherichia coli. The Soleris E. coli method is a growth-based, rapid, automated system composed of temperature-controlled incubation chambers and photodiode-based optical detection devices for measurement of color changes in a prepared medium vial. A dilution of the test sample homogenate is inoculated directly into the vial. Products of E. coli metabolism alter the color of the medium over time, and this change is monitored by the Soleris instrument. The test is used in a dilute-to-specification or specification monitoring manner in which the result is positive or negative around a desired cutoff (in CFU/g) determined by the dilution and volume of sample homogenate added to the vial. Alternatively, the test is used for zero tolerance determinations (e.g., absence in 25 g) by performing an off-line pre-enrichment step followed by transfer of a portion of the pre-enrichment culture to the Soleris vial. Six E. coli strains originating from food sources were inoculated individually into six food commodities: frozen green beans, Echinacea powder, cocoa powder, sweetened condensed milk, pasteurized liquid egg, and shredded mozzarella cheese. Uninoculated samples were included in each trial. The results obtained by the ISO 7251 detection method and the Soleris E. coli method were shown to be in agreement by Chi-square analysis when the presence of E. coli was determined in 25 g of sample. Results from the Soleris E. coli dilute-to-specification method and the ISO 7251 MPN method were found to be in agreement by probability of detection statistical analysis. In inclusivity testing, 52 of 53 E. coli strains were detected within 24 h. Only a non-thermoduric strain of serotype O157:H43 was not detected. In exclusivity testing, all 31 strains tested produced negative results. Results of ruggedness experiments show that accurate results can be obtained even when the operating temperature of the Soleris instrument is set beyond normal tolerances. The internal and independent laboratory studies demonstrated that the Soleris E. coli method could be successfully utilized as an alternative to the reference methods, with a significant time savings of 2 to 3 days.

Reveal Listeria 2.0 test for detection of Listeria spp. in foods and environmental samples.

A Performance Tested Method validation study was conducted for a new lateral flow immunoassay (Reveal Listeria 2.0) for detection of Listeria spp. in foods and environmental samples. Results of inclusivity testing showed that the test detects all species of Listeria, with the exception of L. grayi. In exclusivity testing conducted under nonselective growth conditions, all non-listeriae tested produced negative Reveal assay results, except for three strains of Lactobacillus spp. However, these lactobacilli are inhibited by the selective Listeria Enrichment Single Step broth enrichment medium used with the Reveal method. Six foods were tested in parallel by the Reveal method and the U.S. Food and Drug Administration/Bacteriological Analytical Manual (FDA/BAM) reference culture procedure. Considering data from both internal and independent laboratory trials, overall sensitivity of the Reveal method relative to that of the FDA/BAM procedure was 101%. Four foods were tested in parallel by the Reveal method and the U.S. Department of Agriculture-Food Safety and Inspection Service (USDA-FSIS) reference culture procedure. Overall sensitivity of the Reveal method relative to that of the USDA-FSIS procedure was 98.2%. There were no statistically significant differences in the number of positives obtained by the Reveal and reference culture procedures in any food trials. In testing of swab or sponge samples from four types of environmental surfaces, sensitivity of Reveal relative to that of the USDA-FSIS reference culture procedure was 127%. For two surface types, differences in the number of positives obtained by the Reveal and reference methods were statistically significant, with more positives by the Reveal method in both cases. Specificity of the Reveal assay was 100%, as there were no unconfirmed positive results obtained in any phase of the testing. Results of ruggedness experiments showed that the Reveal assay is tolerant of modest deviations in test sample volume and device incubation time.

Validation of the One Broth One Plate for Salmonella Method for Detection of Salmonella Spp. in Select Food and Environmental Samples: AOAC Performance Tested MethodSM 102002.

BACKGROUND: One Broth One Plate for Salmonella (OBOP Salmonella) is a rapid and simple method for detection of Salmonella spp. in food and environmental samples using traditional culture methodology. The method utilizes single-step enrichment followed by plating to a selective/differential, chromogenic agar. OBJECTIVE: The purpose of the validation study was to measure the effectiveness of the OBOP Salmonella method in comparison to reference culture procedures. METHOD: Performance of the OBOP Salmonella method was compared to that of the U.S. Food and Drug Administration Bacteriological Analytical Manual Chapter 5 reference method for queso fresco, smoked salmon, cantaloupe, chocolate, black pepper, chili powder, dry pet food, and sponge samples from a stainless steel surface, or to that of the U.S. Department of Agriculture Microbiology Laboratory Guidebook Chapter 4.10 method for raw ground turkey, chicken carcass rinse, and pasteurized liquid egg. Inclusivity/exclusivity, robustness, and stability/lot-to-lot consistency testing was also performed. RESULTS: In the matrix study, there were no statistically significant differences in performance between the OBOP Salmonella and reference methods, as determined by probability of detection analysis (P < 0.05), for any of the matrixes examined. All 104 Salmonella spp. strains produced positive results in inclusivity testing, and all 33 non-salmonellae exclusivity strains tested negative with the OBOP Salmonella method. CONCLUSIONS: Results of the validation study show that the OBOP Salmonella method is a reliable procedure for detection of Salmonella spp. in select matrixes. The method is simple to perform, requires no specialized equipment, and produces results in as little as 37 h. HIGHLIGHTS: The OBOP Salmonella method was awarded AOAC PTMSM (#102002) for detection of Salmonella in queso fresco, smoked salmon, cantaloupe, chocolate, black pepper, chili powder, dry pet food, sponge samples on a stainless steel surface, raw ground turkey, chicken carcass rinse, and pasteurized liquid egg. The method is also approved by MicroVal® for a broad range of foods under certification number 2019LR88.

Soleris®Enterobacteriaceae for the Detection of Enterobacteriaceae in Select Foods: AOAC Performance Tested MethodSM 121901.

BACKGROUND: Soleris®Enterobacteriaceae is a growth-based, automated method for detection of Enterobacteriaceae in food. OBJECTIVE: A study was conducted to validate the Soleris method for detection of Enterobacteriaceae in select foods (pasteurized milk, yogurt, mozzarella cheese, ice cream, dried milk, pasteurized liquid egg, frozen cooked chicken, deli ham, lettuce, and dry dog food) at a threshold of ≥ 10 CFU/g of product. METHODS: Inclusivity and exclusivity of the Soleris method were assessed by testing 55 and 38 target and non-target bacterial strains, respectively. Matrix testing was performed with one naturally contaminated and nine inoculated foods. Efficacy of the Soleris method was compared to that of the ISO 21528-2:2017 direct plating reference method using probability of detection analysis. Independent laboratory testing was conducted to verify method performance in two matrixes (yogurt and deli ham). Method robustness, stability, and lot-to-lot consistency of the Soleris reagents were also assessed. RESULTS: Inclusivity of the Soleris test was 91% and exclusivity was 100%. In matrix testing, there were no significant differences in the number of positive results obtained with the Soleris and reference methods for any of the matrixes examined. Overall, of 370 test portions, there were 176 positive results by the Soleris method and 177 positive results by the reference procedure. CONCLUSIONS: Soleris Enterobacteriaceae is an effective method for detection of Enterobacteriaceae in the foods evaluated, with performance equivalent to that of the ISO 21528-2:2017 reference method. HIGHLIGHTS: The Soleris method offers the advantages of labor savings and results within 18 h.

NeoSeekTM STEC: A Multiplex Molecular Method for Detection and Identification of Select Shiga Toxin-Producing Escherichia coli in Beef.

BACKGROUND: NeoSeekTM STEC is a single-source, service-based method for detection and identification of select Shiga toxin-producing Escherichia coli (STEC), including E. coli O157:H7 and STEC of somatic groups O26, O45, O103, O111, O121, and O145. The method is a multiplex molecular method utilizing more than 80 genetic targets to identify STEC in complex matrices such as food enrichment cultures. OBJECTIVE: A study was conducted to validate the NeoSeek method for detection of select STEC in raw beef trim. METHODS: Performance of the NeoSeek STEC method was compared with that of the U.S. Department of Agriculture, Food Safety and Inspection Service reference methods for E. coli O157:H7 and non-O157 STEC for detection of E. coli O157:H7 and E. coli O26:H11 in raw beef trim. Additionally, inclusivity/exclusivity testing and method robustness testing were performed. RESULTS: Results of raw beef trim testing showed no statistically significant differences in performance between the NeoSeek and reference methods in the ability to detect either E. coli O157:H7 or E.coli O26:H11, as determined by probability of detection analysis. Results of inclusivity and exclusivity testing showed 100% expected results with target and nontarget bacteria, with the exception of a single strain of E. coli O157:H7, which was subsequently verified to be stx-negative by PCR. Conclusions and Highlights: NeoSeek STEC is an accurate, reliable method for rapid detection and identification of select STEC in complex populations such as beef trim enrichment cultures.

GeneQuence" Salmonella assay. Performance Tested Method 030201.

A study was conducted to validate the GeneQuence Salmonella DNA hybridization assay, Performance Tested Method 030201, for detection of Salmonella spp. in peanut butter. The study was organized by the AOAC Research Institute under its Emergency Response Validation program. Peanut butter samples inoculated with S. Typhimurium were prepared by an independent laboratory and shipped to study participants for testing. The set of blind-coded test samples consisted of five uninoculated controls, 20 portions inoculated with S. Typhimurium at a low level [determined by most probable number (MPN) analysis to contain 1.1 CFU/25 g portion], and 20 portions inoculated with S. Typhimurium at a higher level (11 CFU/25 g portion by MPN analysis). Samples were tested in parallel by the GeneQuence method and by the U.S. Food and Drug Administration's Bacteriological Analytical Manual reference culture procedure. All five control samples were negative by both methods. For the low-level samples, the same two samples were positive by both the GeneQuence and reference methods. For the high-level samples, the same 19 samples were positive by both methods. All positive GeneQuence assays were confirmed by plating from associated broth cultures. Agreement between the GeneQuence and reference methods was 100%. Sensitivity and specificity of the GeneQuence method were both 100%. Because neither the low- nor the high-level samples yielded the desired fractional positive results (5-15 positives out of 20 samples), a second trial was conducted. Samples in the second trial contained 0.1 and 0.5 CFU/25 g portion for the low and high levels, respectively. All five control samples were negative by both methods. For the low-level samples, the same two samples were positive by both the GeneQuence and reference methods. For the high-level samples, the same three samples were positive by both methods. All positive GeneQuence assays were confirmed by plating from associated broth cultures. Sensitivity and specificity of the GeneQuence method were both 100%. Although once again the desired level of fractional positive results was not obtained, there was 100% agreement between the GeneQuence and reference methods. Based on the results of both trials, it is recommended that the validated claims for Performance Tested Method 030201 be expanded to include peanut butter.

Minor modification to official method 2000.14, Reveal for E. coli O157:H7 test in selected foods and environmental swabs (20-hour method): validation of the test for 375 g raw beef samples.

A lateral flow immunoassay for Escherichia coli O157:H7 (Reveal E. coli O157:H7, 20-h version), previously validated for 25 g raw ground beef, raw beef cubes, apple cider, lettuce rinse, and environmental swab samples, has been validated for use in testing 375 g samples of raw ground beef and raw beef cubes. The Reveal method, including culture confirmation of positive immunoassay results, was evaluated in comparison to the current reference culture procedure of the U.S. Department of Agriculture-Food Safety and Inspection Service. For raw ground beef, the Reveal and reference methods produced the same number of confirmed positive results. For raw beef cubes, the Reveal method produced more positives than the reference method, but this difference was not statistically significant. The Reveal method exhibited 100% specificity, with no false-positive results obtained on uninoculated control samples. It is recommended that this minor modification to Method 2000.14 be adopted Revised First Action.

Minor modification to official method 2000.13, Reveal for E. coli O157:H7 test system in selected foods (8-hour method): validation of the test for 375 g raw beef samples.

A lateral flow immunoassay for Escherichia coli O157:H7 (Reveal E. coli O157:H7, 8-h version), previously validated for 25 g raw ground beef, raw beef cubes, and lettuce rinse samples, has been validated for use in testing 375 g samples of raw ground beef and raw beef cubes. The Reveal method, including culture confirmation of positive immunoassay results, was evaluated in comparison to the current reference culture procedure of the U.S. Department of Agriculture-Food Safety and Inspection Service. For both sample types, the Reveal test with 12-h enrichment produced more positives than the reference method, although the differences were not statistically significant. Statistical equivalence to the reference method was also obtained at 10 and 11 h of enrichment for raw beef cubes and at 8, 10, and 11 h for raw ground beef, but maximum sensitivity of the method is only achieved after 12 h of enrichment. The Reveal method exhibited 100% specificity, with no false-positive results obtained on uninoculated control samples. It is recommended that this minor modification to Method 2000.13 be adopted Revised First Action.

Validation of a modification to Performance-Tested Method 070601: Reveal Listeria Test for detection of Listeria spp. in selected foods and selected environmental samples.

A modification to Performance-Tested Method (PTM) 070601, Reveal Listeria Test (Reveal), is described. The modified method uses a new media formulation, LESS enrichment broth, in single-step enrichment protocols for both foods and environmental sponge and swab samples. Food samples are enriched for 27-30 h at 30 degrees C and environmental samples for 24-48 h at 30 degrees C. Implementation of these abbreviated enrichment procedures allows test results to be obtained on a next-day basis. In testing of 14 food types in internal comparative studies with inoculated samples, there was a statistically significant difference in performance between the Reveal and reference culture [U.S. Food and Drug Administration's Bacteriological Analytical Manual (FDA/BAM) or U.S. Department of Agriculture-Food Safety and Inspection Service (USDA-FSIS)] methods for only a single food in one trial (pasteurized crab meat) at the 27 h enrichment time point, with more positive results obtained with the FDA/BAM reference method. No foods showed statistically significant differences in method performance at the 30 h time point. Independent laboratory testing of 3 foods again produced a statistically significant difference in results for crab meat at the 27 h time point; otherwise results of the Reveal and reference methods were statistically equivalent. Overall, considering both internal and independent laboratory trials, sensitivity of the Reveal method relative to the reference culture procedures in testing of foods was 85.9% at 27 h and 97.1% at 30 h. Results from 5 environmental surfaces inoculated with various strains of Listeria spp. showed that the Reveal method was more productive than the reference USDA-FSIS culture procedure for 3 surfaces (stainless steel, plastic, and cast iron), whereas results were statistically equivalent to the reference method for the other 2 surfaces (ceramic tile and sealed concrete). An independent laboratory trial with ceramic tile inoculated with L. monocytogenes confirmed the effectiveness of the Reveal method at the 24 h time point. Overall, sensitivity of the Reveal method at 24 h relative to that of the USDA-FSIS method was 153%. The Reveal method exhibited extremely high specificity, with only a single false-positive result in all trials combined for overall specificity of 99.5%.

Validation of a modification to Performance-Tested Method 010403: microwell DNA hybridization assay for detection of Listeria spp. in selected foods and selected environmental surfaces.

A modification to Performance-Tested Method 010403, GeneQuence Listeria Test (DNAH method), is described. The modified method uses a new media formulation, LESS enrichment broth, in single-step enrichment protocols for both foods and environmental sponge and swab samples. Food samples are enriched for 27-30 h at 30 degrees C, and environmental samples for 24-48 h at 30 degrees C. Implementation of these abbreviated enrichment procedures allows test results to be obtained on a next-day basis. In testing of 14 food types in internal comparative studies with inoculated samples, there were statistically significant differences in method performance between the DNAH method and reference culture procedures for only 2 foods (pasteurized crab meat and lettuce) at the 27 h enrichment time point and for only a single food (pasteurized crab meat) in one trial at the 30 h enrichment time point. Independent laboratory testing with 3 foods showed statistical equivalence between the methods for all foods, and results support the findings of the internal trials. Overall, considering both internal and independent laboratory trials, sensitivity of the DNAH method relative to the reference culture procedures was 90.5%. Results of testing 5 environmental surfaces inoculated with various strains of Listeria spp. showed that the DNAH method was more productive than the reference U.S. Department of Agriculture-Food Safety and Inspection Service (USDA-FSIS) culture procedure for 3 surfaces (stainless steel, plastic, and cast iron), whereas results were statistically equivalent to the reference method for the other 2 surfaces (ceramic tile and sealed concrete). An independent laboratory trial with ceramic tile inoculated with L. monocytogenes confirmed the effectiveness of the DNAH method at the 24 h time point. Overall, sensitivity of the DNAH method at 24 h relative to that of the USDA-FSIS method was 152%. The DNAH method exhibited extremely high specificity, with only 1% false-positive reactions overall.

Validation of the Soleris yeast and mold test for semiquantitative determination of yeast and mold in selected foods. Performance tested methods 040901.

The Soleris yeast and mold method, a growth-based test system with an optical detection end point, was evaluated for its ability to detect yeast and mold contamination in a wide variety of foods. The Soleris test was used in a semiquantitative manner, in which the test result is positive or negative at a threshold level determined by the dilution and volume of sample homogenate added to the Soleris test vial. By testing at two or more threshold levels, the contamination level can be estimated. The LOD of the Soleris method is 10 CFU/g when 1 mL of a 1:10 sample homogenate is added to the test vial. In these studies, the Soleris results were compared to plate counts obtained using the U.S Food and Drug Administration/Bacteriological Analytical Manual direct plating method, and agreement between the methods was calculated. Considering results from both internal and independent laboratory trials, overall agreement between the methods was 90%. Chi-square analysis showed, with few exceptions, that results of the Soleris and direct plating methods were not statistically different. Ruggedness testing was performed, and the Soleris method was found to be robust when challenged with marginally suboptimal assay conditions. Results of inclusivity testing showed that the Soleris test vial medium supports the growth of a wide variety of yeasts and molds common to foods. Results of exclusivity testing showed that bacteria do not produce positive results, even when present in the vial in relatively high initial concentrations. The Soleris method produces results in 72 h or less and thus offers considerable time savings in comparison to other commonly used yeast and mold methods.

Validation of the Listeria Right NowTM Test for Detection of Listeria spp. from Selected Environmental Surfaces Without Enrichment.

Background: Listeria Right NowTM is a novel, enrichment-free molecular method for detection of Listeria spp. in swab samples from environmental surfaces. The test provides results in real time, indicating the current or recent presence of Listeria spp. in the environment. After sampling, the entire contents of the swab are subject to sample processing, releasing large quantities of target ribosomal RNA molecules into the lysate. A portion of the lysate is then tested using the ANSR® for Listeria isothermal nucleic acid amplification assay. Objective: A Performance Tested MethodSM study was conducted to validate the method for detection of Listeria spp. in swab samples from stainless steel and sealed concrete surfaces. Methods and Results: In inclusivity testing, 60 of 60 Listeria spp. strains tested positive. In exclusivity testing, 31 of 31 nontarget bacterial strains tested negative. In LOD testing, the test was able to detect as few as 2 CFU of L. monocytogenes applied to a stainless steel surface. In matrix testing of inoculated stainless steel and sealed concrete surfaces, there were no statistically significant differences in method performance comparing the Listeria Right Now and U.S. Food and Drug Administration Bacteriological Analytical Manual reference culture procedures as determined by probability of detection analysis. In robustness testing, modest changes to three assay operating parameters simultaneously did not significantly affect performance of the test. Conclusions and Highlights: Results can be obtained in less than 1 h using the Listeria Right Now test, allowing food industry personnel to take immediate corrective action in the case of Listeria contamination incidents.