Magnetoelastic Coupling Evidence by Anisotropic Crossed Thermal Expansion in Magnetocaloric RSrCoFeO6 (R = Sm, Eu) Double Perovskites.

Double perovskite oxides, characterized by their tunable magnetic properties and robust interconnection between the lattice and magnetic degrees of freedom, present an enticing foundation for advanced magnetic refrigeration materials. Herein, we delve into the influence of rare-earth elements on RSrCoFeO6 (R = Sm, Eu) disordered double perovskites by examining their structural, electronic, magnetic, and magnetocaloric properties. Temperature-dependent synchrotron X-ray diffraction analysis confirmed the stability of the orthorhombic phase (Pnma) across a wide temperature range. X-ray photoemission spectroscopy revealed that both Sm and Eu are in the 3+ state, whereas multiple states for Co2+/3+ and Fe3+/4+ are identified. The magnetic investigation and magnetocaloric effect (MCE) analysis brought to light the presence of a long-range antiferromagnetic (AFM) order with a second-order phase transition (SOPT) in both samples. The maximum magnetic entropy change ΔSMmax was approximately 0.9 J/kg K for both samples at applied field 0-7 T, manifesting prominently above Neel temperatures TN ≈ 93 K (Sm) and 84 K (Eu). Nevertheless, different relative cooling powers (RCP) of 112.6 J/kg (Sm) and 95.5 J/kg (Eu) were observed. A detailed analysis of the temperature-dependent lattice parameters shed light on a distinct magnetocaloric effect across the magnetic transition temperature, unveiling an anisotropic thermal expansion [αV = 1.41 × 10-5 K-1 (Sm) and αV = 1.54 × 10-5 K-1 (Eu)] wherein the thermal expansion axial ratio αbSm/αbEu = 0.61 became lower with increasing temperature, which suggests that the Eu sample experiences a greater thermal expansion in the b-axis direction. At the atomic bonding level, the evidence for magnetoelastic coupling around the magnetic transition temperatures TN was found through the anomalies along the average Co/Fe-O bond distance, formal valence, octahedral distortion, as well as an anisotropic lattice expansion.

Unveiling the Structural Properties, Optical Behavior, and Thermoelectric Performance of 2D CsSn2Br5 Halide Obtained by Mechanochemistry.

Metal halide perovskites with a two-dimensional structure are utilized in photovoltaics and optoelectronics. High-crystallinity CsSn2Br5 specimens have been synthesized via ball milling. Differential scanning calorimetry curves show melting at 553 K (endothermic) and recrystallization at 516 K (exothermic). Structural analysis using synchrotron X-ray diffraction data, collected from 100 to 373 K, allows for the determination of Debye model parameters. This analysis provides insights into the relative Cs-Br and Sn-Br chemical bonds within the tetragonal structure (space group: I4/mcm), which remains stable throughout the temperature range studied. Combined with neutron data, X-N techniques permit the identification of the Sn2+ lone electron pair (5s2) in the two-dimensional framework, occupying empty space opposite to the four Sn-Br bonds of the pyramidal [SnBr4] coordination polyhedra. Additionally, diffuse reflectance UV-vis spectroscopy unveils an indirect optical gap of approximately ∼3.3 eV, aligning with the calculated value from the B3LYP-DFT method (∼3.2 eV). The material exhibits a positive Seebeck coefficient as high as 6.5 × 104 µV K-1 at 350 K, which evolves down to negative values of -3.0 × 103 µV K-1 at 550 K, surpassing values reported for other halide perovskites. Notably, the thermal conductivity remains exceptionally low, between 0.32 and 0.25 W m-1 K-1.

Clinical Features and Long-Term Outcomes in Very Young Patients with Myocardial Infarction with Non-Obstructive Coronary Arteries.

Background: The main cause of acute coronary syndrome (ACS) is coronary artery obstruction due to atherosclerotic plaque growth or thrombus formation secondary to plaque rupture or erosion. However, there is a subgroup of patients with signs and symptoms suggestive of ACS but without relevant coronary artery obstruction on coronary angiography. This population is defined as myocardial infarction with non-obstructive coronary arteries (MINOCA). The present study analyzes the clinical features and outcomes of very young patients with a diagnosis of MINOCA. Method: Nested case-control study of ≤40-year-old patients referred for coronary angiography due to clinical suspicion of ACS. Patients were divided into three groups: patients with obstructive coronary artery disease (CAD), patients diagnosed with MINOCA, and controls with non-coronary artery disease. Results: Of 19,321 coronary angiographies performed in our center in a period of 10 years, 408 (2.1%) were in patients ≤40 years old, and MINOCA was identified in 32 (21%) patients. The cardiovascular risk factors for obstructive CAD and MINOCA were very similar. The incidence of major adverse cardiovascular events (MACE) at follow-up was significantly higher in the MINOCA (HR 4.13 (95%CI 1.22-13.89) and obstructive CAD (HR 4.59 (95%CI 1.90-10.99) patients compared to controls. Cocaine use HR 14.58 (95%CI 3.08-69.02), family history of CAD HR 6.20 (95%CI 1.40-27.43), and depression HR 5.16 (95%CI 1.06-25.24) were associated with a poor outcome in the MINOCA population. Conclusion: Very young patients with MINOCA had a poor prognosis at long-term follow-up, similar to patients with obstructive CAD. Focusing efforts on secondary prevention is essential in this population.

RSV: perspectives to strengthen the need for protection in all infants.

Respiratory syncytial virus (RSV)-the most common viral cause of bronchiolitis-is a significant cause of serious illness among young children between the ages of 0-5 years and is especially concerning in the first year of life. Globally, RSV is a common cause of childhood acute lower respiratory illness (ALRI) and a major cause of hospital admissions in young children and infants and represents a substantial burden for health-care systems. This burden is strongly felt as there are currently no effective preventative options that are available for all infants. However, a renaissance in RSV prevention strategies is unfolding, with several new prophylactic options such as monoclonal antibodies and maternal vaccinations that are soon to be available. A key concern is that health decision makers and systems may not be ready to take full advantage of forthcoming technological innovations. A multi-stakeholder approach is necessary to bridge data gaps to fully utilise upcoming options. Knowledge must be made available at multiple levels to ensure that parents and doctors are aware of preventative options, but also to ensure that stakeholders and policymakers are given the necessary information to best advise implementation strategies.

Influence of Polymorphism on the Magnetic Properties of Co5TeO8 Spinel.

This study presents the influence of polymorphism on the magnetic properties of Co5TeO8. This compound with a spinel-like structure [Co2]A[Co3Te]BO8 was synthesized into two polymorphs: one disordered within a cubic Fd3̅m structure, where Co2+ and Te6+ ions are randomly distributed on the octahedral B sites [the disordered polymorph can also be presented as an inverse spinel of the formula Co(Co1.5Te0.5)O4] and the other ordered with a cubic P4332 structure where Co2+ and Te6+ ions are ordered on the B sites. The macroscopic magnetic measurements showed that both polymorphs present a ferrimagnetic ordering, below ∼40 K, and a second transition is also observed at 27 K for the ordered polymorph. Neutron powder diffraction data between room temperature and 1.7 K showed as well the presence of short-range magnetic ordered clusters, which appears for both polymorphs below 200 K. At lower temperature, these short-range orders are transformed into long-range ferrimagnetic orders. Below TC = 40 K, the colinear ferrimagnetic structure of the disordered polymorph is described with the I41/am'd' space group. The ordered polymorph undergoes an incommensurate ferrimagnetic spiral spin ordering below TC1 = 45 K, followed by a second magnetic phase transition at TC2 = 27 K. This last transition is associated with the emergence of an additional ferrimagnetic component and an abrupt change in the magnitude of the magnetic propagation vector k = [0, 0, γ] from γ = 0.086 at T = 30 K to γ ≈ 0.14 in the range between 27 and 1.7 K. The magnetic symmetry of the ordered polymorph is described with the P43(00γ)0 magnetic superspace group. We evidenced that the ordering of Co2+/Te6+ on the B sites changes all of the Co-Co and Co-O distances and thus all JAB, JAA, and JBB exchange interactions, between the A and B sites, which are able to stabilize the incommensurate spin modulation in the ordered polymorph.

Structural Features, Anisotropic Thermal Expansion, and Thermoelectric Performance in Bulk Black Phosphorus Synthesized under High Pressure.

Black phosphorus (BP) allotrope has an orthorhombic crystal structure with a narrow bandgap of 0.35 eV. This material is promising for 2D technology since it can be exfoliated down to one single layer: the well-known phosphorene. In this work, bulk BP was synthesized under high-pressure conditions at high temperatures. A detailed structural investigation using neutron and synchrotron X-ray diffraction revealed the occurrence of anisotropic strain effects on the BP lattice; the combination of both sets of diffraction data allowed visualization of the lone electron pair 3s2. Temperature-dependent neutron diffraction data collected at low temperature showed that the a axis (zigzag) exhibits a quasi-temperature-independent thermal expansion in the temperature interval from 20 up to 150 K. These results may be a key to address the anomalous behavior in electrical resistivity near 150 K. Thermoelectric properties were also provided; low thermal conductivity from 14 down to 6 Wm-1K-1 in the range 323-673 K was recorded in our polycrystalline BP, which is below the reported values for single-crystals in literature.

Dynamic Disorder Restriction of Methylammonium (MA) Groups in Chloride-Doped MAPbBr3 Hybrid Perovskites: A Neutron Powder Diffraction Study.

The hybrid methylammonium (MA) lead halide MAPbX3 perovskites present an appealing optoelectronic behavior with applications in high-efficiency solar cells. The orientation of the organic MA units may play an important role in the properties, given the degrees of freedom for internal motion of MA groups within the PbX6 network. The present neutron powder diffraction study reveals the dynamic features of the MA units in the hybrid perovskite series MAPb(Br1-x Clx )3 , with x=0, 0.33, 0.5, 0.67, and 1. From difference Fourier maps, the H and C/N positions were located within the PbX6 lattice; the refinement of the crystal structures unveiled the MA conformations. Three different orientations were found to exist as a function of the chlorine content (x) and, therefore, of the cubic unit-cell size. These conformations are stabilized by H-bond interactions with the halide ions, and were found to agree with those reported from theoretical calculations.

Experimental Observation of Monoclinic Distortion in the Insulating Regime of SmNiO3 by Synchrotron X-ray Diffraction.

RNiO3 (R = rare-earth element) perovskite materials are well-known to exhibit characteristic metal-insulator transitions. The structural distortion increases as the R member becomes smaller along the series. For SmNiO3, a high-hydrostatic-pressure preparation procedure, yielding samples with much enhanced crystalline quality, combined with the extremely high angular resolution of synchrotron X-ray diffraction (XRD) allowed us to identify a monoclinic phase in the insulating regime (below the metal-insulator transition temperature (TMI) of 127 °C), defined in the space group P21/n. This monoclinic symmetry had not been demonstrated directly using nonresonant XRD or neutron diffraction. This has important repercussions on the electronic nature of this material since the monoclinic structure contains two inequivalent Ni positions, implying a charge disproportionation phenomenon. In the metallic regime (above TMI), the standard orthorhombic Pbnm structure is observed. Therefore, there is a coupled structural and electronic transition, as happens for the very small rare-earth compounds of the RNiO3 perovskite series. Across TMI there is a dramatic rearrangement of the lattice parameters, degree of tilting, and distortion of the NiO6 octahedra, showing the convergence of the Ni-O bond lengths upon entering the metallic phase. Brown's valence analysis of the different elements agrees with other reported values in the literature, matching with bond and charge disproportionation models. By magnetization measurements a Néel temperature (TN) corresponding to the antiferromagnetic ordering of the Ni moments is identified at TN= 220 K, whereas Sm moments experience long-range ordering below 36 K.

Visualization of the Diffusion Pathway of Protons in (NH4)2Si0.5Ti0.5P4O13 as an Electrolyte for Intermediate-Temperature Fuel Cells.

We demonstrate that (NH4)2Si0.5Ti0.5P4O13 is an excellent proton conductor. The crystallographic information concerning the hydrogen positions is unraveled from neutron-powder-diffraction (NPD) data for the first time. This study shows that all the hydrogen atoms are connected though H bonds, establishing a two-dimensional path between the [(Si0.5Ti0.5)P4O132-]n layers for proton diffusion across the crystal structure by breaking and reconstructing intermediate H-O═P bonds. This transient species probably reduces the potential energy of the H jump from an ammonium unit to the next neighboring NH4+ unit. Both theoretical and experimental results support an interstitial-proton-conduction mechanism. The proton conductivities of (NH4)2Si0.5Ti0.5P4O13 reach 0.0061 and 0.024 S cm-1 in humid air at 125 and 250 °C, respectively. This finding demonstrates that (NH4)2Si0.5Ti0.5P4O13 is a promising electrolyte material operating at 150-250 °C. This work opens up a new avenue for designing and fabricating high-performance inorganic electrolytes.

High-Pressure Synthesis, Crystal Structure, and Magnetic and Transport Properties of a Six-Layered SrRhO3.

A SrRhO3 polytype with six-layered (6M) structure was synthesized under high pressure and high temperature. The crystal structure was obtained by refining X-ray powder diffraction with the monoclinic space group C2/c with lattice parameters a = 5.5650(1) Å, b = 9.5967(2) Å, c = 14.0224(4) Å, and ß = 92.846(2)°. It is isostructural with SrIrO3 synthesized under ambient pressure and consists of dimers of the face-shared Rh(2)O6 octahedra connected by their vertices to the corner-shared Rh(1)O6 octahedra along the c axis with a stacking of SrO3 layers in the sequence of CCHCCH, where C and H denote cubic and hexagonal closed packing, respectively. With increasing pressure, the 6M SrRhO3 transforms to an orthorhombic perovskite (Pv) phase, having a = 5.5673(1) Å, b = 5.5399(2) Å, c = 7.8550(2) Å in the space group Pbnm. A pressure-temperature phase diagram shows that the 6M-Pv phase boundary moves to lower temperatures with increasing pressure. Both the 6M and the Pv phases of SrRhO3 were characterized by magnetic susceptibility, resistivity, and thermopower; they are all metals with an enhanced and temperature-dependent magnetic susceptibility; no long-range magnetic order has been found. The polytype structures are normally found in ABO3 oxides with the geometric tolerance factor t > 1. SrRhO3 represents another example (in addition to SrIrO3) where the polytype 6M structure can be stabilized with a t < 1.

Dynamic Octahedral Breathing in Oxygen-Deficient Ba(0.9)Co(0.7)Fe(0.2)Nb(0.1)O(3-δ) Perovskite Performing as a Cathode in Intermediate-Temperature SOFC.

Ba(0.9)Co(0.7)Fe(0.2)Nb(0.1)O(3-δ) outperforms as a cathode in solid-oxide fuel cells (SOFC), at temperatures as low as 700-750 °C. The microscopical reason for this performance was investigated by temperature-dependent neutron powder diffraction (NPD) experiments. In the temperature range of 25-800 °C, Ba(0.9)Co(0.7)Fe(0.2)Nb(0.1)O(3-δ) shows a perfectly cubic structure (a = a0), with a significant oxygen deficiency in a single oxygen site, that substantially increases at the working temperatures of a SOFC. The anisotropic thermal motion of oxygen atoms considerably rises with T, reaching B(eq) ≈ 5 Å(2) at 800 °C, with prolate cigar-shaped, anisotropic vibration ellipsoids that suggest a dynamic breathing of the octahedra as oxygen ions diffuse across the structure by a vacancies mechanism, thus implying a significant ionic mobility that could be described as a molten oxygen sublattice. The test cell with a La(0.8)Sr(0.2)Ga(0.83)Mg(0.17)O(3-δ) electrolyte (∼300 µm in thickness)-supported configuration yields a peak power density of 0.20 and 0.40 W cm(-2) at temperatures of 700 and 750 °C, respectively, with pure H2 as fuel and ambient air as oxidant. The electrochemical impedance spectra (EIS) evolution with time of the symmetric cathode fuel cell measured at 750 °C shows that the Ba(0.9)Co(0.7)Fe(0.2)Nb(0.1)O(3-δ) cathode possesses a superior ORR catalytic activity and long-term stability. The mixed electronic-ionic conduction properties of Ba(0.9)Co(0.7)Fe(0.2)Nb(0.1)O(3-δ) account for its good performance as an oxygen-reduction catalyst.

Magnetic Interactions in the Double Perovskites R2NiMnO6 (R = Tb, Ho, Er, Tm) Investigated by Neutron Diffraction.

R2NiMnO6 (R = Tb, Ho, Er, Tm) perovskites have been prepared by soft-chemistry techniques followed by high oxygen-pressure treatments; they have been investigated by X-ray diffraction, neutron powder diffraction (NPD), and magnetic measurements. In all cases the crystal structure is defined in the monoclinic P21/n space group, with an almost complete order between Ni(2+) and Mn(4+) cations in the octahedral perovskite sublattice. The low temperature NPD data and the macroscopic magnetic measurements indicate that all the compounds are ferrimagnetic, with a net magnetic moment different from zero and a distinct alignment of Ni and Mn spins depending on the nature of the rare-earth cation. The magnetic structures are different from the one previously reported for La2NiMnO6, with a ferromagnetic structure involving Mn(4+) and Ni(2+) moments. This spin alignment can be rationalized taking into account the Goodenough-Kanamori rules. The magnetic ordering temperature (TCM) decreases abruptly as the size of the rare earth decreases, since TCM is mainly influenced by the superexchange interaction between Ni(2+) and Mn(4+) (Ni(2+)-O-Mn(4+) angle) and this angle decreases with the rare-earth size. The rare-earth magnetic moments participate in the magnetic structures immediately below TCM.

Magnetoelectric effect in multiferroic nickelate perovskite YNiO3.

The interaction of magnetic order and spontaneous polarization is a fundamental coupling with the prospect for the control of electronic properties and magnetism. The connection among magnetic order, charge localization and associated metal-insulator transition (MIT) are cornerstones for materials control. Materials that combine both effects are therefore of great interest for testing models that claim the occurrence of spontaneous polarization from magnetic and charge order. One class of materials proposed to combine these functionalities is the family of RNiO3 (R: Lanthanide or Yttrium), whose members show a clear MIT and an antiferromagnetic ground state and for which an electric polarization has been predicted. Here, using resonant magnetic x-ray scattering with circular polarization and an applied electric field we show that YNiO3 possess a magnetic structure containing domains of spin-rotations that are consistent with an electric polarization. We show a reversal of the magnetic structure with the applied electric field confirming that charge ordered RNiO3 are magnetoelectric type II multiferroics with a MIT.

SrMo0.9O3-δ Perovskite with Segregated Ru Nanoparticles Performing as Anode in Solid Oxide Fuel Cells.

A new anode material, Ru-SrMo0.9O3-δ, with a perovskite structure and segregated metallic Ru, has been tested in an intermediate-temperature solid oxide fuel cell (IT-SOFC) in an electrolyte-supported configuration giving substantial power densities as high as 840 mW/cm2 at 850 °C using pure H2 as fuel. This material has been prepared by the citrate method and structurally and microstructurally characterized at room temperature by different techniques such as X-ray diffraction (XRD), neutron powder diffraction (NPD), scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM). NPD was very useful to determine oxygen positions and vacancies, unveiling a cubic and oxygen-deficient perovskite SrMo0.9O3-δ oxide with a Pm-3m space group and potential ionic mobility. On the other hand, SEM and STEM studies have allowed to identify metallic segregated Ru nanoparticles providing the material with an excellent catalytic activity. Other properties such as the thermal expansion coefficient (TEC) and chemical compatibility with other cell components or electrical conductivity have also been studied to understand the excellent performance of this material as anode in IT-SOFC and correlate it with the crystallographic structure.

Multiscale Length Structural Investigation and Thermoelectric Performance of Double-Filled Sr0.2Yb0.2Co4Sb12: An Exceptional Thermal Conductivity Reduction by Filler Segregation to the Grain Boundaries.

Among thermoelectric materials, skutterudites are the most prominent candidates in the mid-temperature range applications. In the multiple-filled Sr0.2Yb0.2Co4Sb12 skutterudite, with Sr and Yb as fillers, we have enhanced the thermoelectric performance of CoSb3 through the reduction of lattice thermal conductivity and the optimization of carrier concentration and electrical conductivity. The high-pressure synthesis of the double-filled derivative promotes filling fraction fluctuation. This is observed by high angular resolution synchrotron X-ray diffraction, showing a phase segregation that corresponds to an inhomogeneous distribution of the filler atoms, located at the 2a positions of the cubic space group Im3̅. In addition, scanning transmission electron microscopy (STEM) combined with EELS spectroscopy clearly shows a segregation of Sr atoms from the surface of the grains, which is compatible with the synchrotron X-ray powder diffraction results. Mean square displacement parameters analysis results in Einstein temperatures of ∼94 and ∼67 K for Sr and Yb, respectively, and a Debye temperature of ∼250 K. The strong effect on resonant and disorder scattering yields a significantly lower lattice thermal conductivity of 2.5 W m-1 K-1 at 773 K. Still, good weighed-mobility values were obtained, with high filling fraction of the Yb and Sr elements. This drives a reduced electrical resistivity of 2.1 × 10-5 Ω m, which leads to a peak zT of 0.26 at 773 K. The analysis and results performed for the synthesized (Sr,Yb)-double filled CoSb3, shed light on skutterudites for potential waste-heat recovery applications.

Optimizing Thermoelectric Properties through Compositional Engineering in Ag-Deficient AgSbTe2 Synthesized by Arc Melting.

Thermoelectric materials offer a promising avenue for energy management, directly converting heat into electrical energy. Among them, AgSbTe2 has gained significant attention and continues to be a subject of research at further improving its thermoelectric performance and expanding its practical applications. This study focuses on Ag-deficient Ag0.7Sb1.12Te2 and Ag0.7Sb1.12Te1.95Se0.05 materials, examining the impact of compositional engineering within the AgSbTe2 thermoelectric system. These materials have been rapidly synthesized using an arc-melting technique, resulting in the production of dense nanostructured pellets. Detailed analysis through scanning electron microscopy (SEM) reveals the presence of a layered nanostructure, which significantly influences the thermoelectric properties of these materials. Synchrotron X-ray diffraction reveals significant changes in the lattice parameters and atomic displacement parameters (ADPs) that suggest a weakening of bond order in the structure. The thermoelectric characterization highlights the enhanced power factor of Ag-deficient materials that, combined with the low glass-like thermal conductivity, results in a significant improvement in the figure of merit, achieving zT values of 1.25 in Ag0.7Sb1.12Te2 and 1.01 in Ag0.7Sb1.12Te1.95Se0.05 at 750 K.

Structural and Electrical Characterization of LaSrAl1-xMgxO4-δ Layered Perovskites Obtained by Mechanical Synthesis.

This work presents the structural and electrical characterization of K2NiF4-type layered perovskites of LaSrAl1-xMgxO4-δ composition to be used as oxide-ion electrolytes for a solid-oxide fuel cell (SOFC). These perovskites were prepared by mechano-chemical synthesis (ball milling), an alternative to traditional synthesis methods such as citrate-nitrates and solid-state reaction. With these methods, two things are avoided: first, the use of nitrate salts, which are more environmentally harmful than oxide precursors, and second, it saves the series of long thermal treatments associated with solid-state reactions. After grinding the precursors, nanometric particles were obtained with a combination of crystalline regions and amorphous regions; this effect was determined by XRD and TEM, showing that Mg has a positive effect on the phase formation by only mechanical synthesis. R2C4: After sintering, it was found by XRD that the sample x = 0.1 only presents the diffraction peaks corresponding to the desired phase, which shows a phase purity greater than 97%, even higher than that of the standard undoped sample. For x = 0.2 and 0.3, there was a segregation of impurities, possibly by the local migration of La and Sr heavy cations; this was determined by SEM and EDS. The electrical characterization of the sintered pellets was carried out by electrochemical impedance spectroscopy, which determined that the incorporation of Mg in the structure improves the ionic conductivity by three orders of magnitude, obtaining conductivities of 1.6 mS/cm at 900 °C for x = 0.2. Although the improvement in conductivity is considerable, many challenges such as densification, the segregation of impurities, and the study of mechanical and thermal properties must be carried out on these materials to endorse them as solid electrolytes in SOFC.

The Path Towards Effective Respiratory Syncytial Virus Immunization Policies: Recommended Actions.

The respiratory syncytial virus (RSV) causes a substantial burden worldwide. After over six decades of research, there is finally a licensed immunization option that can protect the broad infant population, and other will follow soon. RSV immunization should be in place from season 2023/2024 onwards. Doing so requires thoughtful but swift steps. This paper reflects the view of four immunization experts on the efforts being made across the globe to accommodate the new immunization options and provides recommendations organized around five priorities: (I) documenting the burden of RSV in specific populations; (II) expanding RSV diagnostic capacity in clinical practice; (III) strengthening RSV surveillance; (IV) planning for the new preventive options; (V) achieving immunization targets. Overall, Spain has been a notable example of converting RSV prevention into a national desideratum and has pioneered the inclusion of RSV in some of the regional immunization calendars for infants facing their first RSV season.

Structural Features and Optical Properties of All-Inorganic Zero-Dimensional Halides Cs4PbBr6-xIx Obtained by Mechanochemistry.

Despite the great success of hybrid CH3NH3PbI3 perovskite in photovoltaics, ascribed to its excellent optical absorption properties, its instability toward moisture is still an insurmountable drawback. All-inorganic perovskites are much less sensitive to humidity and have potential interest for solar cell applications. Alternative strategies have been developed to design novel materials with appealing properties, which include different topologies for the octahedral arrangements from three-dimensional (3D, e.g., CsPbBr3 perovskite) or two-dimensional (2D, e.g., CsPb2Br5) to zero-dimensional (0D, i.e., without connection between octahedra), as the case of Cs4PbX6 (X = Br, I) halides. The crystal structure of these materials is complex, and their thermal evolution is unexplored. In this work, we describe the synthesis of Cs4PbBr6-xIx (x = 0, 2, 4, 6) halides by mechanochemical procedures with green credentials; these specimens display excellent crystallinity enabling a detailed structural investigation from synchrotron X-ray powder diffraction (SXRD) data, essential to revisit some features in the temperature range of 90-298 K. In all this regime, the structure is defined in the trigonal R3̅c space group (#167). The presence of Cs and X vacancies suggests some ionic mobility into the crystal structure of these 0D halides. Bond valence maps (BVMs) are useful in determining isovalent surfaces for both Cs4PbBr6 and Cs4PbI6 phases, unveiling the likely ionic pathways for cesium and bromide ions and showing a full 3D connection in the bromide phase, in contrast to the iodide one. On the other hand, the evolution of the anisotropic displacement parameters is useful to evaluate the Debye temperatures, confirming that Cs atoms have more freedom to move, while Pb is more confined at its site, likely due to a higher covalency degree in Pb-X bonds than that in Cs-X bonds. Diffuse reflectance ultraviolet-visible (UV-vis) spectroscopy shows that the optical band gap can be tuned depending on iodine content (x) in the range of 3.6-3.06 eV. From density functional theory (DFT) simulations, the general trend of reducing the band gap when Br is replaced by I is well reproduced.

Immunization technologies: Time to consider new preventative solutions for respiratory syncytial virus infections.

New technologies for the prevention of infectious diseases are emerging to address unmet medical needs, in particular, the use of long-acting monoclonal antibodies (mAb) to prevent Respiratory Syncytial Virus (RSV) lower respiratory tract disease in infants during their first RSV season. The lack of precedent for mAbs for broad population protection creates challenges in the assessment of upcoming prophylactic long-acting mAbs for RSV, with associated consequences in legislative and registration categorization, as well as in recommendation, funding, and implementation pathways. We suggest that the legislative and regulatory categorization of preventative solutions should be decided by the effect of the product in terms of its impact on the population and health-care systems rather than by the technology used or its mechanism of action. Immunization can be passive and active, both having the same objective of prevention of infectious diseases. Long-acting prophylactic mAbs work as passive immunization, as such, their recommendations for use should fall under the remit of National Immunization Technical Advisory Groups or other relevant recommending bodies for inclusion into National Immunization Programs. Current regulations, policy, and legislative frameworks need to evolve to embrace such innovative preventative technologies and acknowledge them as one of key immunization and public health tools.