Development and Characterization of Transdermal Patches Using Novel Thymoquinone-L-Arginine-Based Polyamide Nanocapsules for Potential Use in the Management of Psoriasis.

Thymoquinone (TQ) is a phytochemical compound present in Nigella sativa and has potential benefits for treating dermatological conditions such as psoriasis. However, its clinical use is limited due to its restricted bioavailability, caused mainly by its low solubility and permeability. To overcome this, a new transdermal drug delivery system is required. Nanoparticles are known to enhance material solubility and permeability, and hence, this study aimed to synthesize TQ-loaded L-arginine-based polyamide (TQ/Arg PA) nanocapsules incorporated into transdermal patches for prolonged delivery of TQ. To achieve this, Eudragit E polymer, plasticizers, and aloe vera as penetration enhancer were used to develop the transdermal patch. Furthermore, novel TQ/Arg-PA was synthesized via interfacial polymerization, and the resultant nanocapsules (NCs) were incorporated into the matrix transdermal patch. The Arg-PA NCs' structure was confirmed via NMR and FTIR, and optimal TQ/Arg-PA NCs containing formulation showed high entrapment efficiency of TQ (99.60%). Molecular and thermal profiling of TQ/Arg-PA and the transdermal patch revealed the effective development of spherical NCs with an average particle size of 129.23 ± 18.22 nm. Using Franz diffusion cells and synthetic membrane (STRAT M®), the in vitro permeation profile of the prepared patches demonstrated an extended release of TQ over 24 h, with enhanced permeation by 42.64% when aloe vera was employed. In conclusion, the produced formulation has a potential substitute for corticosteroids and other drugs commonly used to treat psoriasis due to its effectiveness, safety, and lack of the side effects typically associated with other drugs.

Preparation and in vivo evaluation of nano sized cubosomal dispersion loaded with Ruta graveolens extracts as a novel approach to reduce asthma-mediated lung inflammation.

Asthma is a chronic disease affecting people of all ages. Asthma medications are associated with adverse effects restricting their long-term usage, demanding newer alternative therapies. This study aimed to investigate the anti-asthmatic properties of Ruta graveolens extract and its prepared nano-cubosomal dispersion (Ruta-ND). Firstly, the R. graveolens methanolic extract exhibited higher anti-inflammatory activity on Lipopolysaccharide (LPS)-activated BEAS-2B cells. To ensure best bioavailability and hence best cellular uptake, R. graveolens extract was loaded in nano-cubosomal dispersion (ND). Then, the anti-asthmatic effects of Ruta extract and ND were simultaneously evaluated in rats' model with ovalbumin-induced allergic asthma. R. graveolens extract and Ruta-ND subsided asthma score and improved lung function by restoring FEV1/FVC ratio to the expected values in control rats. Also, it showed strong antioxidant and anti-inflammatory activities manifested by lowering levels of malondialdehyde (MDA), IL-4, IL-7, TGF-ß, and Ig-E, and increasing levels of superoxide dismutase (SOD) and INF-γ in bronchoalveolar lavage fluid. Our research findings also indicate autophagy induction and apoptosis inhibition by Ruta extract and Ruta-ND. Finally, the HPLC MS/MS phytochemical profiling of R. graveolens extract evident production of various alkaloids, flavonoids, coumarins, and other phenolics with reported pharmacological properties corresponding to/emphasize our study findings. In conclusion, R. graveolens exhibited promise in managing Ova-induced allergic asthma and could be developed as an alternative anti-allergic asthma drug.

Taste Masking of Promethazine Hydrochloride Using l-Arginine Polyamide-Based Nanocapsules.

Promethazine hydrochloride (PMZ), a potent H1-histamine blocker widely used to prevent motion sickness, dizziness, nausea, and vomiting, has a bitter taste. In the present study, taste masked PMZ nanocapsules (NCs) were prepared using an interfacial polycondensation technique. A one-step approach was used to expedite the synthesis of NCs made from a biocompatible and biodegradable polyamide based on l-arginine. The produced NCs had an average particle size of 193.63 ± 39.1 nm and a zeta potential of −31.7 ± 1.25 mV, indicating their stability. The NCs were characterized using differential scanning calorimetric analysis and X-ray diffraction, as well as transmission electron microscopy that demonstrated the formation of the NCs and the incorporation of PMZ within the polymer. The in vitro release study of the PMZ-loaded NCs displayed a 0.91 ± 0.02% release of PMZ after 10 min using artificial saliva as the dissolution media, indicating excellent taste masked particles. The in vivo study using mice revealed that the amount of fluid consumed by the PMZ-NCs group was significantly higher than that consumed by the free PMZ group (p < 0.05). This study confirmed that NCs using polyamides based on l-arginine and interfacial polycondensation can serve as a good platform for the effective taste masking of bitter actives.

Assessment of vaping devices as an alternative respiratory drug delivery system.

The respiratory system has generated significant interest as an alternative drug delivery route. However, because of the limitations encountered with the present inhalation devices, alternative options could present an ideal opportunity to enhance therapeutic effectiveness and patient compliance. Vaping devices have been extensively used to deliver nicotine. This manuscript aimed to conduct an in vitro evaluation of the performance of commonly used vaping devices to assess their effectiveness in delivering fluticasone propionate (FP) to the lungs. Vaping devices were assessed for aerodynamic performance using the NGI. The e-liquid containing FP was made using glycerin and propylene glycol. The results showed the superiority of the vape-tank and vape-coil over the vape-pod. The vape-tank delivered the highest amount of nicotine. The e-liquid containing the FP was assessed and the results were compared with a marketed FP pressurized metered-dose inhaler (pMDI). The results of the respirable dose (RD) ranged from 22.10 µg for the vape pod, to 50.38 µg for the vape-tank; whereas the marketed pMDI value was 44.54 µg despite the lower content of FP per actuation in the vaping devices (100 µg versus 125 µg). Interestingly, the vaping devices showed a significantly lower level of oropharyngeal deposition than the pMDI (10% versus 50%), and hence, the potential for fewer side effects than those encountered with the chronic use of inhalers. Despite the effectiveness of the vape tank and coil in delivering a high percentage of FP, which makes them a promising alternative for delivering an effective yet user-friendly dosage of respiratory drugs, their safety and toxicity need to be established.

Mechanistic modelling of targeted pulmonary delivery of dactinomycin iron oxide-loaded nanoparticles for lung cancer therapy.

With the increase in respiratory conditions including lung cancer post covid-19 pandemic, drug-loaded nanoparticulate dry powder inhalers (DPIs) can facilitate targeted lung delivery as a patient-friendly, non-invasive method. The aim of this work was to synthesise and optimise iron oxide nanoparticles (IONPs) containing dactinomycin as a model drug, using Quality by Design principles. Chitosan and sodium alginate were investigated as polymeric coatings. The mass median aerodynamic diameter (MMAD), fine particle fraction (FPF), burst-effect (BE), entrapment-efficiency and the emitted-dose (ED) were investigated in initial screening studies and outcomes used to set up a Design of Experiments. Results revealed that chitosan IONPs were superior to that of sodium alginate in delivering DPI with optimal properties [ED (89.9%), FPF (59.7%), MMAD (1.59 µm) and BE (12.7%)]. Design space for targeted IONPs included formulations containing 2.1-2.5% dactinomycin and 0.5-0.9% chitosan. Differential scanning calorimetry and X-ray diffraction and SEM-EDS analysis revealed effective formation of IONPs, and TEM images revealed the production of spherical IONPs with particle size of 4.4 ± 0.77 nm. This work overcame the light sensitivity of dactinomycin to potentially target the high molecular weight drugs to the lungs, with controlled delivery based on a reduced burst effect.

Medication errors in Najran, Saudi Arabia: Reporting, responsibility, and characteristics: A cross-sectional study.

Background: Medication error is a preventable adverse effect of medical care, whether or not it is evident or harmful to the patient. Disclosure of medication errors and improvement of patient safety are inexorably related, and they provide one of the strongest reasons to report and disclose errors, including near misses in which no harm comes to the patient. This study aimed to identify medication errors at the southern province of Saudi Arabia. Methods: A cross-sectional retrospective study was conducted by reviewing all medical records in the King Khaled Hospital in Najran, Saudi Arabia. Medication errors related information were extracted from the electronic medical system for the duration between 2018 and 2020. Results: During the study period of 2018 to 2020, a total of 4860 medication errors were identified. More than half of the reported medication errors (66.9%) were linked to ordering, prescribing, or transcribing medications. The most commonly reported medication errors connected to ordering/prescribing/transcribing were inappropriate dosage, dosage units, and therapeutic duplication of medication. The most commonly reported medication errors linked to administration were missing documentation during administration, not performing independent double-checks during the administration of high alert medications, and the administration of look-alike sound-alike (LASA) medications. The intensive care unit (ICU), female medical ward, and male medical ward were the most commonly reported locations for medication errors. Pharmacists detected more than half of the reported medication errors. Physicians were found to be responsible for 66.0% of reported medication errors, followed by nurses. Conclusion: Medication errors are common in hospital settings in Saudi Arabia's southern provinces. Efforts should be made to improve drug ordering, prescribing, and transcription in hospital settings. To guarantee optimum practices, the entire medical team should take responsibility for the patient's optimal medication administration.

Depression and anxiety during the COVID-19 pandemic in Saudi Arabia: A cross-sectional study.

AIMS: The emergence of the COVID-19 global pandemic, with a high transmission and mortality rate, has created an extraordinary crisis worldwide. Such an unusual situation may have an undesirable impact on the mental health of individuals which, in turn, may influence their outcomes. This study aimed to explore the influence of the COVID-19 pandemic on the psychological disposition of residents of the Kingdom of Saudi Arabia. METHODS: A cross-sectional study using an online survey was conducted in Saudi Arabia between 27 March and 27 April 2020. The Patient Health Questionnaire (PHQ-9) and Generalised Anxiety Disorder-7 (GAD-7) were used to assess depression and anxiety. Logistic regression analysis was used to identify predictors of these. RESULTS: A total of 2081 individuals participated in the study. The prevalence of depression and anxiety among the study participants was 9.4% and 7.3% respectively. Non-Saudi residents, individuals aged 50 years and above, divorced people, retired people, university students and those with an income between 2000 and 10 000 SR were at higher risk of developing depression. Saudi individuals, married people, the unemployed and those with a high income (>10 000 RS) were at higher risk of developing anxiety. CONCLUSION: We found that there is a wide range of Saudi residents who are at higher risk of developing mental illness during the current COVID-19 pandemic. Policymakers and mental healthcare providers are advised to provide continuous monitoring of the psychological consequences during this pandemic and provide the required health support.

The perspectives of physicians regarding antidiabetic therapy de-intensification and factors affecting their treatment choices-A cross-sectional study.

AIMS: Comprehensive diabetes management may include treatment intensification or the administration of antidiabetic combination therapy. However, this may be associated with an increased risk of adverse events and death. The aim of this study was to understand physicians' perspectives regarding treatment de-intensification, HbA1c goals individualisation, and factors affecting their treatment choice for patients with type 2 diabetes mellitus (T2DM). METHODS: A cross-sectional study was conducted in primary and secondary care units in Saudi Arabia using online questionnaire. Two previously validated questionnaires were used to understand physicians' awareness of, agreement with, and their practices of individualising HbA1c goals and antidiabetic treatment optimisation, and to assess factors affecting physicians' treatment choice when prescribing antidiabetic treatment for patients with type 2 diabetes mellitus. Study population were physicians who are treating patients with diabetes mellitus during the period between October 2017 and May 2018. RESULTS: A total of 205 physicians have participated in the study. Approximately 50% of physicians had family medicine speciality (n = 98, 47.8%). The majority of physicians (n = 183, 89.3%) were familiar with the concept of HbA1c goals individualisation. However, only 66.3% of them (n = 136) reported that they apply it either always or most of the time. 58.5% (n = 120) of physicians reported that they would not initiate conversations about de-intensifying antidiabetic therapy even if their patients had a stable HbA1c values for one year. Physicians showed higher consideration to objective patient clinical data and their assessment of patient's health status, with minor consideration to patient-related factors. CONCLUSIONS: Healthcare professionals should focus more on implementing contemporary practices and applying any necessary treatment de-intensification or dose adjustment. Subjective patient factors should be taken into account further, as these factors are associated with better disease management.

Effectiveness of an educational intervention in improving the patient medication reconciliation in the emergency department.

AIMS: This study aimed to evaluate the effectiveness of an educational intervention in improving the patient medication reconciliation process. METHOD: This was a cross-sectional study that was conducted at St. Jude hospital, California (CA), United States. An educational intervention was provided to the healthcare team working in the emergency department (ED) to explore its effectiveness in improving their patient medication reconciliation practices. A survey was administered to explore the healthcare staff's views on where responsibility lay in their team concerning the fulfilment of appropriate medication reconciliation procedures. Additionally, we identified the barriers facing the completion of appropriate medication reconciliation using open-ended question provided to healthcare staff at the hospital. RESULTS: In the pre-intervention phase, the percentage of patients who received medication reconciliation was statistically significantly higher during the day shift (71.0% compared with 51.3%). In the postintervention phase, the percentage of patients who received medication reconciliation was statistically significantly higher during the night shift (96.7% compared with 75.8%). Overall, the percentage of patients who received medication reconciliation was statistically significantly higher in the postintervention group (81.3%) compared with the pre-intervention group (64.7%) (P < .001). CONCLUSION: Educational intervention is an effective tool in improving medication reconciliation practices in inpatient settings. The process of medication reconciliation should be conducted based on shared responsibility between healthcare providers and aimed at reducing medication errors and improving patient safety.

Knowledge and awareness of the general population and healthcare providers about retinoblastoma: It is time to know the glow.

Retinoblastoma is the most frequent primary intraocular tumour in childhood. Early detection of retinoblastoma is the key to successful management with a higher chance of survival. This study aims to assess the knowledge of the general population and healthcare providers about retinoblastoma in term of presentation, risk factors, timing for diagnosis, and complications. A cross-sectional study using an online survey was conducted in three Arab countries (Jordan, Saudi Arabia, and Iraq) between 28 August and 16 September 2020. The questionnaire tool was constructed based on an extensive literature review to explore the study's aim and objectives. Logistic regression was used to identify predictors of better knowledge about retinoblastoma. A total of 3676 participants were involved in the study (Jordan = 2654, Saudi Arabia = 604, and Iraq = 418). The average retinoblastoma knowledge score for the whole study population was 6.25 (SD = 4.12) out of 21, representing 29.8% (out of the maximum possible total score). Participants aged above 50 years old, married individuals, those with a secondary education level, those who work as professionals in industry, those who have more than four children, and those who reported that they were not in direct contact with a large number of children were less likely to be knowledgeable about retinoblastoma presentation, risk factors, the timing for diagnosis, and complications (P < .05). Early detection is the cornerstone for decreasing morbidity and mortality among children with retinoblastoma. However, the awareness and knowledge about retinoblastoma are very limited in our study population. Efforts should be directed at increasing awareness of both the general population and healthcare providers regarding retinoblastoma. Policymakers are responsible for improving knowledge and awareness about retinoblastoma to facilitate early detection of the disease by conducting awareness campaigns in addition to improve screening skills of healthcare providers and providing them with proper screening and diagnostic tools.

Development of orally dissolving films for pediatric-centric administration of anti-epileptic drug topiramate - A design of experiments (DoE) study.

Children have often been treated as small adults in relation to drug formulation, but research has now shown this not to be the case. Therefore, there is a push from regulatory bodies to provide drug formulations specifically tailored towards the needs of this fragmented population. Orally dissolving films (ODFs) have been identified as an emerging opportunity, to bridge this gap. Therefore, the aim of this study was to prepare ODFs containing topiramate, an antiepileptic drug, using solvent casting method as a potential alternative to oral tablets/powders for paediatrics. For this purpose, a Design of Experiment (DoE) was employed to optimise formulation parameters. 24 formulations were prepared by changing the polymer type (HPMC, Guar-Gum or PEO), concentration (0.4%-1.2%w/v); plasticizer type (glycerol\sorbitol) and concentration (0.1-0.3%w/v). Disintegration time, content-uniformity, film quality and thickness uniformity were the responses. Surface and molecular profiling were conducted on the optimal formulation (N4). TGA and XRD results demonstrated the stability of materials upon production into films, while the SEM images showed smooth films that proved to be resilient due to good mechanical properties. HPMC-glycerine based ODFs are presented as an effective dosage form to enhance the ease of administration and patient compliance of topiramate, specifically for paediatric patients.

Formulation of sublingual promethazine hydrochloride tablets for rapid relief of motion sickness.

The delivery of antihistaminic agents via the oral route is problematic, especially for elderly patients. This study aimed to develop a sublingual formulation of promethazine hydrochloride by direct compression, and to mask its intensely bitter taste. Promethazine hydrochloride (PMZ) sublingual tablets prepared by direct compression were optimized using Box-Behnken full factorial design. The effect of a taste-masking agent (Eudragit E 100, X1), superdisintegrant (crospovidone; CPV, X2) and lubricant (sodium stearyl fumarate; SSF, X3) on sublingual tablets' attributes (responses, Y) was optimized. The prepared sublingual tablets were characterized for hardness (Y1), disintegration time (Y2), initial dissolution rate (IDR; Y3) and dissolution efficiency after 30 min (Dissolution Efficiency (DE); Y4). The obtained results showed a significant positive effect of the three independent factors on tablet hardness (P < 0.05), and the interactive effect of Eudragit E 100 and CPV on tablet hardness was significant. Disintegration time was mainly affected by Eudragit E 100 and CPV concentrations. Moreover, IDR was employed to assess the taste masking effect, lower values were obtained at higher Eudragit E 100 concentration despite it was statistically insignificant (p > 0.05). Optimized formulation that was suggested by the software was composed of: Eudragit E 100 (X1) = 2.5% w/w, CPV (X2) = 4.13% w/w, and SSF (X3) = 1.0% w/w. The observed values of the optimized formula were found to be close to the predicted optimized values. The Differential Scanning Calorimetric (DSC) studies indicated no interaction between PMZ and tablet excipients.

A Novel Technique to Improve Drug Loading Capacity of Fast/Extended Release Orally Dissolving Films with Potential for Paediatric and Geriatric Drug Delivery.

Orally dissolving films (ODFs) have received much attention as potential oral drug delivery systems for paediatric and geriatric patients, particularly those suffering from dysphagia. With their unique properties and advantages, the technology offers improved patient compliance and wider acceptability, eliminates the fear of choking, enables ease of administration and offers dosing convenience, without the requirement of water. However, adequate drug loading remains a challenge. The aim of this study was to mechanistically design and evaluate fast and extended release ODF formulations with high drug loading capacity, displaying good physicochemical and mechanical properties, as a potential dosage form for paediatric and geriatric use employing a slightly soluble model drug-ibuprofen. Different polymers (0.6-10% HPMC, 0.6-1.5% guar gum), plasticisers (0.1-0.5% glycerine, 0.1% sorbitol) and processing conditions (40-60°C drying temperatures, 8-16 h drying times) were investigated to produce films using the solvent casting method. Molecular compatibility was assessed using TGA, XRD and FTIR whereas film topography was assessed using SEM. Maximum ibuprofen load in single films was 20.7 mg/film (54.4%) and released 100% drug content in 5 min, while triple layered ibuprofen-loaded films contained 62.2 mg/film and released 100% drug release in 1 h. The ODFs demonstrated good disintegration time using low volume artificial saliva media and high dosage from uniformity. This study provides a mechanistic insight to the design and evaluation of fast and extended release ODFs with high drug loading, suitable for administration to paediatric and geriatric patients.

Middle East Respiratory Syndrome (MERS) and novel coronavirus disease-2019 (COVID-19): From causes to preventions in Saudi Arabia.

Saudi Arabia is one of the countries that has been affected by COVID-19. At the beginning of March 2020, it revealed a steadily rising number of laboratory-confirmed cases. By 20th May 2020, 59,854 infected cases had been confirmed, with 329 deaths. To prevent a further outbreak of COVID-19, this article discusses the current understanding of COVID-19 and compares it with the outbreak of Middle East Respiratory Syndrome (MERS) in 2012 in Saudi Arabia. It also discusses the causes, transmission, symptoms, diagnosis, treatments and prevention measures to identify an applicable measure to control COVID-19.

Knowledge about COVID-19 and beliefs about and use of herbal products during the COVID-19 pandemic: A cross-sectional study in Saudi Arabia.

The lack of treatment options for COVID-19 has raised many concerns among populations worldwide, which has led to many attempts to find alternative options to prevent the transmission of the disease or to alleviate the progression of the infection, including focusing more on preventive measures (to prevent transmission to other individuals) and the use of natural products and herbal extracts to increase immunity and decrease the probability of getting infected. This study explored the knowledge of the population of the Kingdom of Saudi Arabia (KSA) about COVID-19 preventive measures and their belief about the consumption of herbal products for the prevention of COVID-19 infection. A total of 5,258 individuals participated in this study. Participants' knowledge about the appropriate COVID-19 preventive measures in terms of handwashing procedures, self-quarantine and social distancing was moderate, with a mean score of 5.5 (SD: 1.7) out of 10 (representing around 55.0% of the total score). About 22.1% (n = 1,161) of the participants reported that they have used herbal products or nutritional supplements during the pandemic period, to protect themselves from the disease. Social media and the Internet (39.4%, n = 372) were the main motivators for the participants to try herbal products. Vitamin C was the most commonly used food supplement to increase immunity and reduces the chance of contracting COVID-19. Our study demonstrated that the general population in Saudi Arabia has a moderate level of knowledge about COVID-19 transmission and preventive measures. A considerable proportion of the population reported the use of herbal products or food supplements in order to protect themselves from the disease. Policymakers are suggested to provide further educational campaigns that increase population knowledge about the disease transmission routes and preventive measures. In addition, the use of herbal products should be evidence-based to ensure patient safety.

Addressing 10 Myths About Pediatric Palliative Care.

With advances in biomedical sciences, a growing number of conditions affecting children have evolved from being considered life-limiting to almost chronic diseases. However, improvements in survival rates often come at a cost of increased medical complexity and lengthy hospitalizations, which can be associated with a poorer quality of life. This is where pediatric palliative care (PPC) can play a significant role. PPC is a specialty of healthcare that focuses on the prevention and relief of suffering in children with serious conditions. Unfortunately, despite the well-identified need for PPC services across pediatric specialties, multiple misconceptions persist. Common myths about palliative care are identified and deconstructed in light of the most recent evidenced-based references in the field to provide guidance to healthcare providers to address these. PPC is often associated with end-of-life care, loss of hope, and cancer. Some healthcare providers and parents also believe that information like diagnosis should be withheld from children for their emotional protection. These examples of misconceptions hinder the integration of pediatric palliative care and its additional layer of support and clinical expertise. PPC providers have advanced communication skills, are able to instill hope in the face of uncertainty, are trained to initiate and implement individualized pain and symptom management plans, and understand how to improve the quality of life in children with serious illnesses. Improved awareness about the scope of PPC is needed to ensure that children benefit from the maximum expertise and support throughout their complex health trajectories.

Preclinical evaluation of novel synthesised nanoparticles based on tyrosine poly(ester amide) for improved targeted pulmonary delivery.

Fixed dose combinations (FDCs) incorporating two or three medicines in a single inhaler have been created to enhance patient compliance and hence clinical outcomes. However, the development of dry powder inhalers (DPIs), particularly for FDCs, faces challenges pertinent to formulation uniformity and reproducibility. Therefore, this project aimed to employ nanotechnology to develop a FDC of DPIs for market-leading medicines-fluticasone propionate (FP) and salmeterol xinafoate (SAL)-for asthma management. Nanoaggregates were prepared using a novel biocompatible and biodegradable poly(ester amide) based on the amino acid tyrosine, utilising a one-step interfacial polymerisation process. The produced tyrosine poly (ester amide) drug-loaded nanoparticles were evaluated for content uniformity, PSA, FTIR, TEM, DSC, XRD and aerodynamic performance (in vitro and in vivo). The optimised formulation demonstrated high entrapment efficiency- > 90%. The aerodynamic performance in terms of the emitted dose, fine particle fraction and respirable dose was superior to the carrier-based marketed product. In-vivo studies showed that FP (above the marketed formulation) and SAL reached the lungs of mice in a reproducible manner. These results highlight the superiority of novel FDC FP/SAL nanoparticles prepared via a one-step process, which can be used as a cost-effective and efficient method to alleviate the burden of asthma.

24 Factorial Design Formulation Optimization and In vitro Characterization of Desloratadine Nanosuspension Prepared Using Antisolvent Precipitation.

INTRODUCTION: Desloratadine, a second-generation antihistaminic drug, is poorly watersoluble and requires amelioration of the dissolution rate to improve its pharmacokinetics properties. METHOD: This study investigated the impact of polymer, surfactant types, and concentration on the particle size, zeta potential, and dissolution efficiency of nanosuspensions formulated through the solvent antisolvent precipitation method. To optimize the delivery of Desloratadine nanosuspension, we used Minitab software and a 4-factor, 2-level full factorial design. Physicochemical properties and drug release studies were conducted to evaluate the suggested nanosuspension formulations. The optimization goals included minimizing particle size and zeta potential while maximizing dissolution efficiencies. RESULT: The selected optimal nanosuspension demonstrated favourable values, including a particle size of 478.63 ± 15.67 nm, a zeta potential of -36.24 ± 3.21 mV, and dissolution efficiencies in double distilled water and buffer of 90.29 ± 3.75 % and 93.70 ± 3.67 %, respectively. The optimized formulation was subjected to additional analysis using X-ray powder diffraction (XPRD), scanning and transmission electron microscopy (SEM and TEM), and Fourier-transform infrared spectroscopy (FTIR). CONCLUSION: The optimized nanosuspension formulation also underwent further studies under optimal lyophilization conditions, revealing the effectiveness of mannitol as a cryoprotectant at a concentration of 8%.

Endogenous bacterial endophthalmitis in an HIV patient with uncontrolled diabetes: A case of rare ocular complication.

Endogenous bacterial endophthalmitis (EE) is an intraocular infection with a poor prognosis. Timely diagnosis and prompt treatment are crucial to prevent vision loss. In this communication, we describe a case of EE caused by Streptococcus pyogenes (Group A Streptococcus [GAS]) in an HIV-positive patient with poorly controlled type 2 diabetes mellitus (DM). A 60-year-old man with a history of HIV and poorly controlled type 2 diabetes, presented with progressive blurry vision, left eye pain, redness, and headache. EE was diagnosed based on the clinical presentation and gram stain analysis of blood culture. Treatment with vitreous tap, intravitreal, topical antibiotics, and systemic antibiotics significantly improved the patient's symptoms. The case highlights the rarity of GAS as a causative agent of EE, particularly in patients with risk factors such as HIV infection and DM.

Capecitabine-loaded NLC for Breast Cancer Treatment: Preparation, Characterization, and In vitro Evaluation.

BACKGROUND: Cancer treatment often involves the use of potent antineoplastic drugs like Capecitabine [CAP], which can lead to serious toxicities. There is a need for dosage forms to manage these toxicities that can deliver the medication effectively to the target site while maintaining therapeutic efficacy at lower doses. To achieve the aforesaid objective, NLC containing capecitabine [NANOBIN] was prepared and evaluated. Different formulations of NANOBIN, denoted as CaTS, CaT1S, CaT2S, CaTS1, and CaTS2, were designed and evaluated to improve drug delivery and therapeutic outcomes. METHODS: The NANOBIN formulations were prepared using the hot homogenization method. The characterization of these formulations was conducted based on various parameters such as particle size, Polydispersity Index [PDI], Zeta Potential [ZP], Transmission Electron Microscopy [TEM] imaging, and Encapsulation Efficiency [EE]. In vitro evaluations included stability testing, release studies to assess drug release kinetics, and a cytotoxicity assay [MTT assay] to evaluate the efficacy of these formulations against human breast cancer cells [MCF-7]. RESULTS: The characterization results revealed that all NANOBIN formulations exhibited particle sizes ranging from 65 to 193 nm, PDI values within the range of 0.26-0.37, ZP values between 46.47 to 61.87 mV [-ve], and high EE percentages ranging from 94.121% to 96.64%. Furthermore, all NANOBIN formulations demonstrated sustained and slow-release profiles of CAP. The MTT assay showed that the NANOBINs exhibited significantly enhanced cytotoxic efficacy, approximately 10 times greater than free CAP when tested on MCF-7 cells. These findings indicate the potential of NANOBINs to deliver CAP effectively to the target site, enabling prolonged drug availability and enhanced therapeutic effects at lower doses. CONCLUSION: The study demonstrates that NANOBINs can effectively deliver CAP to target sites, prolonging drug exposure and enhancing therapeutic efficacy while reducing the required dose. Further studies are necessary to validate these findings and establish NANOBINs as a preferred treatment option for cancer therapy.