Cleaner Biofuel Production via Process Parametric Optimization of Nonedible Feedstock in a Membrane Reactor Using a Titania-Based Heterogeneous Nanocatalyst: An Aid to Sustainable Energy Development.

Membrane technology has been embraced as a feasible and suitable substitute for conventional time- and energy-intensive biodiesel synthesis processes. It is ecofriendly, easier to run and regulate, and requires less energy than conventional approaches, with excellent stability. Therefore, the present study involved the synthesis and application of a highly reactive and recyclable Titania-based heterogeneous nanocatalyst (TiO2) for biodiesel production from nonedible Azadhiracta indica seed oil via a membrane reactor, since Azadhiracta indica is easily and widely accessible and has a rich oil content (39% w/w). The high free fatty acids content (6.52 mg/g KOH) of the nonedible oil was decreased to less than 1% via two-step esterification. Following the esterification, transesterification was performed using a heterogeneous TiO2 nanocatalyst under optimum conditions, such as a 9:1 methanol-oil molar ratio, 90 °C reaction temperature, 2 wt.% catalyst loading, and an agitation rate of 600 rpm, and the biodiesel yield was optimized through response surface methodology (RSM). Azadhiracta indica seed oil contains 68.98% unsaturated (61.01% oleic acid, 8.97% linoleic acid) and 31.02% saturated fatty acids (15.91% palmitic acid, 15.11% stearic acid). These fatty acids transformed into respective methyl esters, with a total yield up to 95% achieved. The biodiesel was analyzed via advanced characterization techniques like gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared spectroscopy (FT-IR), and nuclear magnetic resonance (NMR), whereas the catalyst was characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and Fourier transform infrared spectroscopy (FT-IR). Due to its physicochemical properties, Azadirachta indica seed oil is a highly recommended feedstock for biodiesel production. Moreover, it is concluded that the Titania-based heterogeneous nanocatalyst (TiO2) is effective for high-quality liquid fuel synthesis from nonedible Azadirachta indica seed oil in a membrane reactor, which could be an optional green route to cleaner production of bioenergy, eventually leading to sustenance, robustness, and resilience that will aid in developing a holistic framework for integrated waste management.

Seed Coat Morphology and Sculpturing of Selected Invasive Alien Plants from Lesser Himalaya Pakistan and Their Systematic Implications.

Invasive alien species (IAS) are considered as the second major threat to biodiversity after habitat destruction worldwide. They are aggressive competitors and dominate an ecosystem where they introduce and cause reduction in indigenous diversity. Invasive plants alter the evolutionary pathways of native species by competition, niche displacement, hybridization, introgression, predation, and ultimately extinction of native species. Biological invasion also results in economic and environmental damage and harm to human health. Invasive plants have an effective reproductive as well as dispersal mechanisms. Most invasive plants produce abundant fruits and seeds that are widely disseminated and remain viable in the soil for several years. Invasive plants may change their seed character in order to adapt themselves to the new environment and facilitate their performance. A study on seed coat sculpturing in invasive alien plants collected from Lesser Himalaya region, Pakistan, was conducted using scanning electron microscope to determine the importance of seed morphological characters as an additional tool for identification. Quantitative characters such as seed length and width, macromorphological characters including color, hilum position, and seed shape, and micromorphological characters of seed including surface patterns and periclinal and anticlinal wall of seeds were studied. Findings at the present indicate that most of the seeds were found spherical followed by ovate and elliptical in shape with smooth surface and showed terminal hilum. Almost reticulate seed patterns were observed in seeds. Majority of seeds showed raised anticlinal walls with protuberance periclinal walls. The seeds of Xanthium strumarium were observed with maximum length of 13 mm and with width of 8 mm. Length by width ratio of seeds was also calculated; it was found that maximum L/W ratio was observed in Sonchus oleraceus L., i.e., 2.66. Seed characters, both macro- and micromorphological, furnish useful data for classification and delimitation of invasive taxa. This study will help to understand the invasion mechanism in plants due to variations in seed surface, shape, and other characters. Adaptive behavior of the seed during the invasion process of the new ecosystem is also elaborated.

Implication of scanning electron microscopy as a tool for identification of novel, nonedible oil seeds for biodiesel production.

Biodiesel is a promising, bio-based, renewable, nontoxic, environment friendly, and alternative fuel for petroleum derived fuels which helps to reduce dependency on conventional fossil fuels. In this study, six novel, nonedible seed oil producing feedstock were explored for their potential for sustainable production of biodiesel. It is very important to correctly identify oil yielding plant species. Scanning electron microscopy (SEM) was used as reliable tool for authentic identification of oil yielding seeds. Macromorphological characters of seeds were studied with light microscopy (LM). Outcomes of LM of seeds exposed distinctive variation in seed size from 16.3 to 3.2 mm in length and 12.4 to 0.9 mm in width, shape varied from oval to triangular, and color from black to light brown. Oil content of nonedible seed ranged from 25 to 30% (w/w). Free fatty acid content of seed oil varied from 0.32 to 2.5 mg KOH/g. Moreover, ultra structural study of seeds via SEM showed variation in surface sculpturing, cell arrangement, cell shape, periclinal wall shape, margins, protuberances, and anticlinal wall shape. Surface sculpturing varied from rugged, reticulate, varrucose, papillate, and striate. Periclinal wall arrangements confirmed variation from rough, wavy, raised, depressed, smooth, and elevated whereas, anticlinal walls pattern showed variation from profuse undulating, smooth, raised, grooved, deep, curved, and depressed. It was concluded that SEM could be a latent and advanced technique in unveiling hidden micromorphological characters of nonedible oil yielding seeds which delivers valuable information to researchers and indigenous people for precise and authentic identification and recognition.

Microscopic techniques for characterization and authentication of oil-yielding seeds.

Investigation of alternative energy sources is need of current time due to growing power crisis and associated environmental issues. Biodiesel is considered as sustainable power source and promising alternative to fossil fuels. Therefore, our current investigation aimed to identify micromorphological characters of 10 novel nonedible oil-yielding seeds through scanning electron microscopy. It was revealed from light microscopic study that there is variation in seed size from 3 to 15 mm in length and 2 to 11 mm in width. Likewise, a huge variation in color was observed such as light green, greenish yellow, blackish brown, and various shades of brown. Presence and absence of Hilum was observed, and compression of seeds varied from depressed, lateral, and dorsoventral. Seed's shape differs from ovate, clavate, triangular ovate, cuneiform, ovoid, and elliptical shape. Seed oil content fall in range of 18-58% (wt/wt). Free fatty acid content of the seeds varies from 0.3 to 3.1 mg KOH/g. Ultrastructure of seeds exhibited huge variation in shape, size, periclinal wall, anticlinal wall, and surface ornamentation. Nonedible seeds varied in wall structure from angular, wavy, dentate entire, irregular, puzzled, elongated, even, and polygonal. The periclinal wall arrangements show alteration from flat, looped, raised, depressed, lofty, even, pentagonal, polygonal, and undulate seed margins. Outcomes of this investigation recommended that scanning electron microscopy could act as a helpful tool in disclosing the hidden micromorphological characters among nonedible oil-yielding seeds and subsequently helping in correct, authentic seed identification and classification as potential feedstock for biodiesel.