RESUMO
Lipid-coated noble metal nanoparticles (L-NPs) combine the biomimetic surface properties of a self-assembled lipid membrane with the plasmonic properties of a nanoparticle (NP) core. In this work, we investigate derivatives of cholesterol, which can be found in high concentrations in biological membranes, and other terpenoids, as tunable, synthetic platforms to functionalize L-NPs. Side chains of different length and polarity, with a terminal alkyne group as Raman label, are introduced into cholesterol and betulin frameworks. The synthesized tags are shown to coexist in two conformations in the lipid layer of the L-NPs, identified as "head-out" and "head-in" orientations, whose relative ratio is determined by their interactions with the lipid-water hydrogen-bonding network. The orientational dimorphism of the tags introduces orthogonal functionalities into the NP surface for selective targeting and plasmon-enhanced Raman sensing, which is utilized for the identification and Raman imaging of epidermal growth factor receptor-overexpressing cancer cells.
Assuntos
Lipídeos/química , Lipossomos/química , Nanopartículas Metálicas/química , Nanopartículas/química , Química Click , Bicamadas Lipídicas/química , Simulação de Dinâmica MolecularRESUMO
The adsorbate-mediated strong metal-support interaction (A-SMSI) offers a reversible means of altering the selectivity of supported metal catalysts, thereby providing a powerful tool for facile modulation of catalytic performance. However, the fundamental understanding of A-SMSI remains inadequate and methods for tuning A-SMSI are still in their nascent stages, impeding its stabilization under reaction conditions. Here, we report that the initial concentration of oxygen vacancy in oxide supports plays a key role in tuning the A-SMSI between Ru nanoparticles and defected titania (TiO2-x). Based on this new understanding, we demonstrate the in situ formation of A-SMSI under reaction conditions, obviating the typically required CO2-rich pretreatment. The as-formed A-SMSI layer exhibits remarkable stability at various temperatures, enabling excellent activity, selectivity and long-term stability in catalyzing the reverse water gas-shift reaction. This study deepens the understanding of the A-SMSI and the ability to stabilize A-SMSI under reaction conditions represents a key step for practical catalytic applications.
RESUMO
The direct urea fuel cell (DUFC) is an important but challenging renewable energy production technology, it offers great promise for energy-sustainable developments and mitigating water contamination. However, DUFCs still suffer from the sluggish kinetics of the urea oxidation reaction (UOR) owing to a 6â e(-) transfer process, which poses a severe hindrance to their practical use. Herein, taking ß-Ni(OH)2 nanosheets as the proof-of-concept study, we demonstrated a surface-chemistry strategy to achieve metallic Ni(OH)2 nanosheets by engineering their electronic structure, representing a first metallic configuration of transition-metal hydroxides. Surface sulfur incorporation successfully brings synergetic effects of more exposed active sites, good wetting behavior, and effective electron transport, giving rise to greatly enhanced performance for UOR. Metallic nanosheets exhibited a much higher current density, smaller onset potential and stronger durability.
RESUMO
Photothermal conversion represents one crucial approach for solar energy harvesting and its exploitation as a sustainable alternative to fossil fuels; however, an efficient, cost-effective, and generalized approach to enhance the photothermal conversion processes is still missing. Herein, we develop a feasible and efficient photothermal conversion strategy that achieves simultaneous light and heat management using supported metal clusters and WSe2 interlayer toward enhanced CO2 hydrogenation photothermal catalysis. The interlayer can simultaneously reduce heat loss in the catalytic layer and improve light absorption, leading to an 8-fold higher CO2 conversion rate than the controls. The optical and thermal performance of WSe2 interlayered catalysts on different substrates was quantified using Raman spectroscopy. This work demonstrates a feasible and generalized approach for effective light and heat management in solar harvesting. It also provides important design guidelines for efficient photothermal converters that facilitate the remediation of the energy and environmental crises faced by humans.
RESUMO
Photothermal catalytic CO2 hydrogenation holds great promise for relieving the global environment and energy crises. The "nano-greenhouse effect" has been recognized as a crucial strategy for improving the heat management capabilities of a photothermal catalyst by ameliorating the convective and radiative heat losses. Yet it remains unclear to what degree the respective heat transfer and mass transport efficiencies depend on the specific structures. Herein, the structure-function relationship of the "nano-greenhouse effect" was investigated and optimized in a prototypical Ni@SiO2 core-shell catalyst towards photothermal CO2 catalysis. Experimental and theoretical results indicate that modulation of the thickness and porosity of the SiO2 nanoshell leads to variations in both heat preservation and mass transport properties. This work deepens the understandings on the contributing factor of the "nano-greenhouse effect" towards enhanced photothermal conversion. It also provides insights on the design principles of an ideal photothermal catalyst in balancing heat management and mass transport processes.
RESUMO
The interest in introducing light into heterogeneous catalysis is driven not only by the urgent need of replacing fossil energy but also by the promise of controlling product selectivity by light. The product selectivity differences observed in recent studies between light and dark reactions are often attributed to photochemical effects. Here, we report the discovery of a non-photochemical origin of selectivity difference, at essentially the same CO2 conversion rate, between photothermal and thermal CO2 hydrogenation reactions over a Ru/TiO2-x catalyst. While the presence of the photochemical effect from ultraviolet light is confirmed, it merely enhances the catalytic activity. Systematic investigation reveals that the gradual formation of an adsorbate-mediated strong metal-support interaction under catalytic conditions is responsible for the variation in the catalytic selectivity. We demonstrate that differences in product selectivity under light/dark reactions do not necessarily originate from photochemical effects. Our study refines the basis for determining photochemical effects and highlights the importance of excluding non-photochemical effects in mechanistic studies of light-controlled product selectivity.
RESUMO
Improving the solar-to-thermal energy conversion efficiency of photothermal nanomaterials at no expense of other physicochemical properties, e.g., the catalytic reactivity of metal nanoparticles, is highly desired for diverse applications but remains a big challenge. Herein, a synergistic strategy is developed for enhanced photothermal conversion by a greenhouse-like plasmonic superstructure of 4 nm cobalt nanoparticles while maintaining their intrinsic catalytic reactivity. The silica shell plays a key role in retaining the plasmonic superstructures for efficient use of the full solar spectrum, and reducing the heat loss of cobalt nanoparticles via the nano-greenhouse effect. The optimized plasmonic superstructure catalyst exhibits supra-photothermal CO2 methanation performance with a record-high rate of 2.3 mol gCo -1 h-1 , close to 100% CH4 selectivity, and desirable catalytic stability. This work reveals the great potential of nanoscale greenhouse effect in enhancing photothermal conversions through the combination with conventional promoting strategies, shedding light on the design of efficient photothermal nanomaterials for demanding applications.
RESUMO
The exploitation of hierarchical carbon nanocages with superior light-to-heat conversion efficiency, together with their distinct structural, morphological, and electronic properties, in photothermal applications could provide effective solutions to long-standing challenges in diverse areas. Here, we demonstrate the discovery of pristine and nitrogen-doped hierarchical carbon nanocages as superior supports for highly loaded, small-sized Ru particles toward enhanced photothermal CO2 catalysis. A record CO production rate of 3.1 mol·gRu-1·h-1 with above 90% selectivity in flow reactors was reached for hierarchical nitrogen-doped carbon-nanocage-supported Ru clusters under 2.4 W·cm-2 illumination without external heating. Detailed studies reveal that the enhanced performance originates from the strong broadband sunlight absorption and efficient light-to-heat conversion of nanocage supports as well as the excellent intrinsic catalytic reactivity of sub-2 nm Ru particles. Our study reveals the great potential of hierarchical carbon nanocages in photothermal catalysis to reduce the fossil fuel consumption of various industrial chemical processes and stimulates interest in their exploitation for other demanding photothermal applications.
RESUMO
Sunlight-driven photocatalytic CO2 reduction provides intriguing opportunities for addressing the energy and environmental crises faced by humans. The rational combination of plasmonic antennas and active transition metal-based catalysts, known as "antenna-reactor" (AR) nanostructures, allows the simultaneous optimization of optical and catalytic performances of photocatalysts, and thus holds great promise for CO2 photocatalysis. Such design combines the favorable absorption, radiative, and photochemical properties of the plasmonic components with the great catalytic potentials and conductivities of the reactor components. In this review, recent developments of photocatalysts based on plasmonic AR systems for various gas-phase CO2 reduction reactions with emphasis on the electronic structure of plasmonic and catalytic metals, plasmon-driven catalytic pathways, and the role of AR complex in photocatalytic processes are summarized. Perspectives in terms of challenges and future research in this area are also highlighted.
RESUMO
Plastic materials are ubiquitous in medical devices and consumer goods. As bacterial contamination of plastic surfaces can pose significant health risks, there is a need for effective approaches both to inactivate bacteria on plastic surfaces and to prevent colonization of plastic surfaces. In this study, we evaluate a plasmonic photoreactor coating for plastic surfaces that provides both active and passive antimicrobial effects and implement a visible light-driven antibacterial flow sterilizer. We demonstrate that this approach inactivates bacteria in an aqueous suspension passed through a photoreactor-coated polyethylene tubing, achieving log reduction values (LRVs) > 5 for both Gram-positive and -negative bacteria under resonant LED illumination. Importantly, the antimicrobial flow sterilizers do not cause a detectable loss of functionality for monoclonal antibodies that were included in this work as an example of high-value biologics that require sterilization. Under ambient light illumination, the plasmonic photoreactor coating exhibits a significant inhibitory effect on bacterial colonization and biofilm formation. The inhibitory effect was substantially weaker for mammalian cells, indicating some selectivity in the protection provided by the coating.
Assuntos
Anti-Infecciosos , Plásticos , Animais , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Bactérias , Mamíferos , EsterilizaçãoRESUMO
Bimetallic nanomaterials exhibit excellent catalytic performance in photothermal CO2 hydrogenation due to the synergistic effect between the two metal components. However, the component-performance relationship remains unclear, which hinders the design of efficient bimetallic catalysts and the investigation of catalytic reaction mechanism. Here we illustrate the influence of the composition of binary alloy on their performance of photothermal catalytic CO2 hydrogenation by using monodispersed Pd-Ni nanocrystal as an example. Our study reveals that Ni and Pd play a significantly different role in the catalytic processes. Higher Ni component in the catalysts could lead to stronger light absorption, higher activity, and lower CO selectivity. The optimized Pd4 Ni1 -SiO2 catalyst exhibited a near-unity and stable CO production rate of 230â mmol â g-1 â h-1 under 25-sun illumination. This study paves the way for the usage of bimetal in photothermal CO2 catalysis towards more efficient solar-to-chemical energy conversions, and sheds light on some general design principles of bimetallic catalysts to balance the intrinsic properties of individual components.
RESUMO
Excited, or "hot" charge carrier generation and transfer driven by the decay of localized surface plasmon resonances (LSPRs) are key steps in plasmonic photocatalysis. Hybrid structures that contain both metal and semiconductor building blocks facilitate the extraction of reactive charge carriers and their utilization for photoelectrocatalysis. Additional functionality arises from hybrid structures that combine noble metal nanostructures with semiconductor components, such as chalcopyrite (CuFeS2) nanocrystals (NCs), which by themselves support quasistatic resonances. In this work, we use a hybrid membrane to integrate Au nanorods (NRs) with a longitudinal LSPR at 745 nm and CuFeS2 NCs with a resonance peak at 490 nm into water-stable nanocomposites for robust and bifunctional photocatalysis of oxygen and hydrogen evolution reactions in a wavelength-dependent manner. Excitation of NRs or NCs in the nanocomposite correlates with increased hydrogen or oxygen evolution, respectively, consistent with a light-driven electron transfer between the metal and semiconductor building blocks, the direction of which depends on the wavelength. The bifunctional photoreactivity of the nanocomposite is enhanced by Cu(I)/Cu(II)-assisted catalysis on the surface of the NCs.
RESUMO
Bacterial, viral and fungal infections pose serious threats to human health and well-being. The continuous emergence of acute infectious diseases caused by pathogenic microbes and the rapid development of resistances against conventional antimicrobial drugs necessitates the development of new and effective strategies for the safe elimination of microbes in water, food or on surfaces, as well as for the inactivation of pathogenic microbes in human hosts. The need for new antimicrobials has triggered the development of plasmonic nano-antimicrobials that facilitate both light-dependent and -independent microbe inactivation mechanisms. This review introduces the relevant photophysical mechanisms underlying these plasmonic nano-antimicrobials, and provides an overview of how the photoresponses and materials properties of plasmonic nanostructures can be applied in microbial pathogen inactivation and sensing applications. Through a systematic analysis of the inactivation efficacies of different plasmonic nanostructures, this review outlines the current state-of-the-art in plasmonic nano-antimicrobials and defines the application space for different microbial inactivation strategies. The advantageous optical properties of plasmonic nano-antimicrobials also enhance microbial detection and sensing modalities and thus help to avoid exposure to microbial pathogens. Sensitive and fast plasmonic microbial sensing modalities and their theranostic and targeted therapeutic applications are discussed.
Assuntos
Anti-Infecciosos , Nanoestruturas , Antibacterianos/farmacologia , Anti-Infecciosos/farmacologia , Humanos , Viabilidade MicrobianaRESUMO
Photocatalytic compounds and complexes, such as tris(bipyridine)ruthenium(II), [Ru(bpy)3]2+, have recently attracted attention as light-mediated bactericides that can help to address the need for new antibacterial strategies. We demonstrate in this work that the bactericidal efficacy of [Ru(bpy)3]2+ and the control of its antibacterial function can be significantly enhanced through combination with a plasmonic nanoantenna. We report strong, visible light-controlled bacterial inactivation with a nanocomposite design that incorporates [Ru(bpy)3]2+ as a photocatalyst and a Ag nanoparticle (NP) core as a light-concentrating nanoantenna into a plasmonic hybrid photoreactor. The hybrid photoreactor platform is facilitated by a self-assembled lipid membrane that encapsulates the Ag NP and binds the photocatalyst. The lipid membrane renders the nanocomposite biocompatible in the absence of resonant illumination. Upon illumination, the plasmon-enhanced photoexcitation of the metal-to-ligand charge-transfer band of [Ru(bpy)3]2+ prepares the reactive excited state of the complex that oxidizes the nanocomposite membrane and increases its permeability. The photooxidation induces the release of [Ru(bpy)3]2+, Ag+, and peroxidized lipids into the ambient medium, where they interact synergistically to inactivate bacteria. We measured a 7 order of magnitude decrease in Gram-positive Arthrobacter sp. and a 4 order of magnitude decrease in Gram-negative Escherichia coli colony forming units with the photoreactor bactericides after visible light illumination for 1 h. In both cases, the photoreactor exceeds the bactericidal standard of a log reduction value of 3 and surpasses the antibacterial effect of free Ag NPs or [Ru(bpy)3]2+ by >4 orders of magnitude. We also implement the inactivation of a bacterial thin film in a proof-of-concept study.
Assuntos
Arthrobacter/crescimento & desenvolvimento , Escherichia coli/crescimento & desenvolvimento , Nanopartículas Metálicas/química , Processos Fotoquímicos , Prata , Antibacterianos/síntese química , Antibacterianos/química , Antibacterianos/farmacologia , Rutênio/química , Rutênio/farmacologia , Prata/química , Prata/farmacologiaRESUMO
The monosialodihexosylganglioside, GM3, and its binding to CD169 (Siglec-1) have been indicated as key factors in the glycoprotein-independent sequestration of the human immunodeficiency virus-1 (HIV-1) in virus-containing compartments (VCCs) in myeloid cells. Here, lipid-wrapped polymer nanoparticles (NPs) are applied as a virus-mimicking model to characterize the effect of core stiffness on NP uptake and intracellular fate triggered by GM3-CD169 binding in macrophages. GM3-functionalized lipid-wrapped NPs are assembled with poly(lactic-co-glycolic) acid (PLGA) as well as with low and high molecular weight polylactic acid (PLAlMW and PLAhMW) cores. The NPs have an average diameter of 146 ± 17 nm and comparable surface properties defined by the self-assembled lipid layer. Due to differences in the glass transition temperature, the Young's modulus (E) differs substantially under physiological conditions between PLGA (E PLGA = 60 ± 32 MPa), PLAlMW (E PLA lMW = 86 ± 25 MPa), and PLAhMW (E PLA hMW = 1.41 ± 0.67 GPa) NPs. Only the stiff GM3-presenting PLAhMW NPs but not the softer PLGA or PLAlMW NPs avoid a lysosomal pathway and localize in tetraspanin (CD9)-positive compartments that resemble VCCs. These observations suggest that GM3-CD169-induced sequestration of NPs in nonlysosomal compartments is not entirely determined by ligand-receptor interactions but also depends on core stiffness.
RESUMO
After injuries, axonal regeneration over long distance is challenging due to lack of orientation guidance. Biocompatible scaffolds have been used to mimic the native organization of axons to guide and facilitate axonal regeneration. Those scaffolds are of great importance in achieving functional connections of the nervous system. We have developed a nanoladder scaffold to guide directional outgrowth and facilitate regeneration of axons. The nanoladders, composed of micron-scale stripes and nanoscale protrusions, were fabricated on the glass substrate using photolithography and reactive ion etching methods. Embryonic neurons cultured on the nanoladder scaffold showed significant neurite elongation and axonal alignment in parallel with the nanoladder direction. Furthermore, the nanoladders promoted axonal regeneration and functional connection between organotypic spinal cord slices over 1 mm apart. Multimodality imaging studies revealed that such neuronal regeneration was supported by directional outgrowth of glial cells along nanoladders in the organotypic spinal cord slice culture as well as in the coculture of glial cells and neurons. These results collectively herald the potential of our nanoladder scaffold in facilitating and guiding neuronal development and functional restoration.
RESUMO
Ferromagnetism is usually deemed incompatible with superconductivity. Consequently, the coexistence of superconductivity and ferromagnetism is usually observed only in elegantly designed multi-ingredient structures in which the two competing electronic states originate from separate structural components. Here we report the use of surface molecular adsorption to induce ferromagnetism in two-dimensional superconducting NbSe2, representing the freestanding case of the coexistence of superconductivity and ferromagnetism in one two-dimensional nanomaterial. Surface-structural modulation of the ultrathin superconducting NbSe2 by polar reductive hydrazine molecules triggers a slight elongation of the covalent Nb-Se bond, which weakens the covalent interaction and enhances the ionicity of the tetravalent Nb with unpaired electrons, yielding ferromagnetic ordering. The induced ferromagnetic momentum couples with conduction electrons generating unique correlated effects of intrinsic negative magnetoresistance and the Kondo effect. We anticipate that the surface molecular adsorption will be a powerful tool to regulate spin ordering in the two-dimensional paradigm.