Electrical and Optical Properties of In2O3 Thin Films Deposited on Sapphire Substrate.

In2O3 thin films were prepared on c-plane sapphire substrates using laser molecular beam epitaxy technique. The X-ray diffraction (XRD) patterns revealed that the In2O3 thin films were highly oriented along the (111) direction. The intensity of (222) diffraction peaks mainly depend on growth temperature, and the crystallite sizes mainly depend on oxygen pressure. The carrier concentrations exhibit a decrease with increasing growth temperature and oxygen pressure, meantime, the resistivity increase. The red shift of In2O3 thin films respect to that of bulk In2O3 can be explained by defect energy levels formation, the blue shift of In2O3 thin films depends on carrier concentration, can be explained by Burstein-Moss band-filling effect.

[A multicenter, randomized, controlled, phase â £ clinical study of PEG-rhG-CSF for preventing chemotherapy induced neutropenia in patients with breast cancer].

Objective: To explore the efficacy and safety of polyethylene glycal recombinant human granulocyte colony-stimulating factor (PEG-rhG-CSF) in preventing chemotherapy-induced neutropenia in patiens with breast cancer. Methods: There were two parts in the present phase Ⅳ clinical study. One was a randomized, controlled clinical study. Patients in this study received PEG-rhG-CSF or rhG-CSF in the first cycle and followed with both PEG-rhG-CSF in the rest of 3 cycles. The other one was a single arm study. Patients who developed Ⅲ/Ⅳ grade neutropenia in the screening cycle received PEG-rhG-CSF in the rest of 3 cycles chemotherapy. Results: In the first cycle of randomized, controlled study, the incidence of Ⅳ grade neutropenia are 31.48% and 35.58% respectively in PEG-rhG-CSF and rhG-CSF group, with no statistically significant differences (P=0.527 6). The duration of Ⅳ grade neutropenia respectively are 2.22±1.58 and 3.00±1.59 days, with a statistically significant difference (P=0.016 6). In the single arm study, the incidence of Ⅳ grade neutropenia was 57.76% in screening cycle. And the incidence decreased to 16.35%, 10%, and 8.57% in the followed 3 cycle after the use of PEG-rhG-CSF. The incidence of adverse effects was 5.06%, and the major adverse effect was bone pain which with an incidence of 2.8%. Conclusion: The fixed 6mg dose of PEG-rhG-CSF can effectively prevent neutropenia in patients with breast cancer in multicycle chemotherapy and it has a low incidence of adverse events and mild adverse reaction.

Optoelectronic properties of CdSe0.75S0.25 nanocrystals assembled into micro-electrodes.

CdSe0.75S0.25 semiconductor nanocrystals were synthesized by chemical colloidal route. The crystal structure, morphology and optical properties of synthesized CdSe0.75S0.25 nanocrystals were characterized by XRD, TEM and UV-Vis absorption spectroscopy respectively. The crystal structure of CdSe0.75S0.25 is face-centered Cubic sphalerite phase. The average size is about 7 nm in diameter. A gold tip-to-tip structure electrode with the gap size -20 microm was fabricated using conventional optical lithography technique followed by film deposition and standard lift-off process. An optoelectronics device was fabricated based on CdSe0.75S0.25 by assembling nanocrystals into electrodes by using dielectrophoresis (DEP) process. The electrical transport properties and opto-electrical transport properties of the fabricated device were measured at temperature range from 5 K to 305 K. The results show that the resistance of CdSe0.75S0.25 NCs increases with the temperature decreases, indicating a typical semiconductor behavior. An obvious photoconductive behavior was observed, demonstrated potential application in nano-optoelectronics devices. After data analyzing, the conductivity shows the 0.5 exponent of Efros-Shklovskii variable-range-hopping (ES-VRH) model.

Association of the stress hyperglycemia ratio and clinical outcomes in patients with cardiovascular diseases: a systematic review and meta-analysis.

OBJECTIVE: Cardiovascular disease (CVD) and cerebrovascular disease are the leading cause of death around the world all the time. A novel marker described as the stress hyperglycemia ratio (SHR) can reflect the acute hyperglycemic status and is associated with poor outcomes in patients with acute illness, such as stroke and myocardial infarction (MI). Our previous study has shown that SHR was strongly related to the clinical outcomes of stroke patients. Nevertheless, the association between SHR and clinical outcomes in patients with CVD is still unclear and controversial. Consequently, in the current study, we analyzed the association of SHR and clinical outcomes in CVD patients by systematic review and meta-analysis. MATERIALS AND METHODS: We searched the electronic databases to identify SHR studies of patients who met the eligibility criteria for CVD. We performed our study complying with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). We utilized a ten terms tool to assess the potential bias of included studies. Major adverse cardiovascular and cerebrovascular events (MACCEs), all-cause death, left ventricular ejection fraction (LVEF), and other exciting outcome data were extracted for statistical analysis. Moreover, we used the DerSimonian and Laird random-effects model to perform the meta-analysis and conducted subgroup analyses to identify factors associated with substantial heterogeneity. RESULTS: The study cohort included nine studies comprising 32,292 patients with CVD. Our meta-analysis found that MACCEs in the high SHR group were 1.68 folds compared with that in the low SHR group [odds ratio (OR) 1.68, 95% confidence interval (CI) 1.41-2.00, p < 0.00001]. Besides, all-cause death in the high SHR group was 1.52 folds compared with that in the low SHR group (OR 1.52, 95% CI 1.15-2.01, p < 0.00001). Higher SHR meant the lower LVEF (mean difference [MD] -2.03, 95% CI [-3.28-0.79], p = 0.001). The risk of cardiogenic shock and stroke were 2.47 and 1.53 folds in the high SHR group, respectively, compared with the low SHR group. Yet, no statistically significant difference was observed for revascularization (OR 0.88, 95% CI 0.77-1.01, p = 0.08), recurrent MI (OR 1.27, 95% CI 0.69-2.33, p = 0.44), and left ventricular end-diastolic diameter (LVEDD) (MD 0.61, 95% CI [-1.65, 2.87], p = 0.60) between the two groups. Subgroup analyses identified that different study design was associated with heterogeneity about MACCEs and LVEF. Besides, studies from different countries were associated with heterogeneity about all-cause death. CONCLUSIONS: Higher SHR significantly increases the occurrence of MACCEs and all-cause death and decreases LVEF. Moreover, Higher SHR means a higher risk of cardiogenic shock and stroke. Nevertheless, SHR had no relationship with revascularization, recurrent MI, and LVEDD. As a novel and non-invasive marker, SHR should be paid more attention to in clinical practice. Future investigation should focus on the diagnostic value of SHR in CVD and the early control of stress hyperglycemia. Although no randomized, double-blind studies have been conducted, the available massive sample studies reflect the actual situation in the clinic and assist clinical decision-making.

Enzyme-mediated one-pot synthesis of hydrogel with the polyphenol cross-linker for skin regeneration.

Polyphenols can trigger immunity that activates intracellular anti-inflammatory signaling and prevents external infections. In this study, we report the fabrication of chitosan-based hydrogels with epigallocatechin gallate (EGCG) using enzyme-mediated one-pot synthesis. The tyrosinase-mediated oxidative reaction of the phenolic rings of EGCG with the primary amines on chitosan results in stable EGCG-chitosan hydrogels. The EGCG concentrations contributed to the cross-linking density and physical properties of EGCG-chitosan hydrogels. Furthermore, EGCG-chitosan hydrogels maintained intrinsic properties such as antibacterial and antioxidant effects. When endotoxin-activated RAW 264.7 macrophage cells were cultured with EGCG-chitosan hydrogels, the hydrogels reduced the inflammatory response of the RAW 264.7 cells. Furthermore, subcutaneous implantation of EGCG-chitosan hydrogels reduced endogenous macrophage and monocyte activation. When the EGCG-chitosan hydrogels were applied to a full-skin defect wound, they facilitated skin regeneration. Our study demonstrates that the one-pot synthesized EGCG-chitosan hydrogels can be applied in broad tissue regeneration applications that require immune modulation.

Biomaterial strategies to reduce implant-associated infections.

Although the prophylaxis in controlling sterility within the operating room environment has been greatly improved, implant-associated infection is still one of the most serious complications in implant surgeries due to the existence of immune depression in the peri-implant area. The antibacterial ability of materials themselves logically becomes an important factor in preventing implant-associated infections. With the understanding of the pathogenesis of implant-associated infections, many approaches have been developed through providing an anti-adhesive surface, delivering antibacterial agents to disrupt cell-cell communication and preventing bacteria aggregation or biofilm formation, or killing bacteria directly (lysing the cell membrane). In this article, we review the current strategies in improving the antibacterial ability of materials to prevent implant infection and further present promising tactics in materials design and applications.

Innovative methods of rapid bacterial quantification and applicability in diagnostics and in implant materials assessment.

In recent years, a variety of new technologies have been proposed that allow rapid qualitative and quantitative microbiological analyses. In this paper we discuss the urgent needs for reliable and rapid microbiological analytical techniques in different applicative fields involving the research, production and medical application of implant materials, and the potential benefits derived from the use of new methods for rapid bacterial quantification. Current compendial methods are easy to perform and have gained confidence over their long period of use, but the supplemental use of new technologies could represent real breakthroughs whenever sensitive and rapid responses are urgently required and not met by the tests currently in use. Overall, the new microbiological methods require critical evaluation depending on their specific type of application and they may still not be thought of as totally substitutive, but they certainly exhibit considerable potential for different areas of biomaterials, as well as for advanced therapy medicinal and tissue engineering treatments.

Compact advanced extreme-ultraviolet imaging spectrometer for spatiotemporally varying tungsten spectra from fusion plasmas.

A compact advanced extreme-ultraviolet (EUV) spectrometer operating in the EUV wavelength range of a few nanometers to measure spatially resolved line emissions from tungsten (W) was developed for studying W transport in fusion plasmas. This system consists of two perpendicularly crossed slits-an entrance aperture and a space-resolved slit-inside a chamber operating as a pinhole, which enables the system to obtain a spatial distribution of line emissions. Moreover, a so-called v-shaped slit was devised to manage the aperture size for measuring the spatial resolution of the system caused by the finite width of the pinhole. A back-illuminated charge-coupled device was used as a detector with 2048 × 512 active pixels, each with dimensions of 13.5 × 13.5 µm2. After the alignment and installation on Korea superconducting tokamak advanced research, the preliminary results were obtained during the 2016 campaign. Several well-known carbon atomic lines in the 2-7 nm range originating from intrinsic carbon impurities were observed and used for wavelength calibration. Further, the time behavior of their spatial distributions is presented.

VUV spectroscopy in impurity injection experiments at KSTAR using prototype ITER VUV spectrometer.

The ITER vacuum ultra-violet (VUV) core survey spectrometer has been designed as a 5-channel spectral system so that the high spectral resolving power of 200-500 could be achieved in the wavelength range of 2.4-160 nm. To verify the design of the ITER VUV core survey spectrometer, a two-channel prototype spectrometer was developed. As a subsequent step of the prototype test, the prototype VUV spectrometer has been operated at KSTAR since the 2012 experimental campaign. From impurity injection experiments in the years 2015 and 2016, strong emission lines, such as Kr xxv 15.8 nm, Kr xxvi 17.9 nm, Ne vii 46.5 nm, Ne vi 40.2 nm, and an array of largely unresolved tungsten lines (14-32 nm) could be measured successfully, showing the typical photon number of 1013-1015 photons/cm2 s.

Animal models of osteomyelitis.

There are numerous reports in the literature using animal models of osteomyelitis for investigating pathogenesis, diagnosis, and treatment of bone infections. Rabbits, rats, and dogs are commonly used animals, and, less frequently, chickens, guinea pigs, miniature pigs, goats, and sheep. Commonly used bones for creating local osteomyelitis include tibia, femur, and radius, and, less frequently, mandible and spine. When designing a specific model, one should consider which animal and which bone will be used, which route for inoculation (either local injection or systemically through vascular injection), which bacterial species and how many bacteria should be applied, if and what sclerosing agent, foreign body or implant should be employed, and if local trauma is needed. Basic methods of evaluation include clinical observation, radiography, microbiology, and histology.

Prevalence and antibiotic resistance of 15 minor staphylococcal species colonizing orthopedic implants.

Several species belonging to Staphylococcus genus (non Sau/ non Sep species) exhibit increasing abilities as opportunistic pathogens in colonisation of periprosthesis tissues. Here we report on antibiotic resistance of 193 strains, belonging to non Sau/ non Sep species, consecutively collected from orthopedic implant infections in a period of about 40 months. The 193 strains (representing 17% of all staphylococci isolated) were analysed for their antibiotic resistance to 16 different drugs. Five species turned out more prevalent, ranging from 1 to 5%: S. hominis (4.2%), S. haemolyticus (3.7%), S. capitis (2.7%), S. warneri (2.6%), and S. cohnii (1.6%). Among these, the prevalence of antibiotic resistance to penicillins was similar, ranging from 51% to 66%. Conversely, significant differences were observed for all the remaining antibiotics. For S. haemolyticus the resistances to oxacillin and imipenem, the four aminoglycosides and erythromycin were at least twice that of the other three species which were compared. S. warneri was on the contrary the species with the lowest occurrence of resistant strains. Ten species appeared only rarely at the infection sites: S. lugdunensis, S. caprae, S. equorum, S. intermedius, S. xylosus, S. simulans, S. saprophyticus, S. pasteuri, S. sciuri, and S. schleiferi. The behaviours of these species, often resistant to penicillins, were individually analysed. Differences in both the frequencies and the panels of antibiotic resistances observed among the non Sau/ non Sep species: i) suggest that horizontal spreading of resistance factors, if acting, was not sufficient per se to level their bio-diversities; ii) highlight and confirm the worrisome appearance within the Staphylococcus genus of emerging ""new pathogens"", not homogeneous for their virulence and antibiotic resistance prevalence, which deserve to be recognised and treated individually.

Automated ribotyping to distinguish the different non Sau/ non Sep staphylococcal emerging pathogens in orthopedic implant infections.

Several species belonging to Staphylococcus genus, other than Staphylococcus aureus and Staphylococcus epidermidis (non Sau/ non Sep species), exhibit increasing abilities as opportunistic pathogens in the colonisation of periprosthetic tissues. Consequently, the availability of means for accurate identification is crucial to assess the pathogenic characteristics and to clarify clinical relevance of the individual species. Here, 146 clinical staphylococcal isolates belonging to non Sau/ non Sep species from prosthesis-associated orthopedic infections were analyzed by conventional enzymatic galleries and by automated ribotyping. Twelve different species were recognised: S. capitis, S. caprae, S. cohnii, S. equorum, S. haemolyticus, S. hominis, S. lugdunensis, S. pasteuri, S. sciuri, S. simulans, S. warneri, S. xylosus. Ribotype identifications were compared with the phenotypes obtained by the Api 20 Staph system and/or ID 32 Staph system. ID 32 Staph profiles were more consistent with ribotyping results than Api Staph profiles. Across the different staphylococcal species investigated, correct identifications with Api Staph were 45%, while with ID 32 Staph they were 59%. It has, however, to be mentioned that ID 32 Staph was mostly applied to discriminate unmatched ribotyping and Api Staph identifications, thus to a subpopulation of strains with ""atypical"" metabolic profile. Automated ribotyping provided a correct identification for 91% of the isolates. These results confirm automated ribotyping as a convenient rapid technique, still subject to improvements, which will accurately and rapidly recognise the newly emerging staphylococcal pathogens in implant-related orthopedic infections.

Biocompatibility of supercritical CO2-treated titanium implants in a rat model.

Supercritical phase CO2 is a promising method for sterilizing implantable devices and tissue grafts. The goal of this study is to evaluate the biocompatibility of titanium implants sterilized by supercritical phase CO2 in a rat subcutaneous implantation model. At 5 weeks post implantation titanium implants sterilized by supercritical phase CO2 produce a soft tissue reaction that is comparable to other methods of sterilization (steam autoclave, ultraviolet light radiation, ethylene oxide gas, and radio-frequency glow-discharge), as indicated by the thickness and density of the foreign body capsule, although there were some differences on the capillary density. Overall the soft tissue response to the implants was similar among all methods of sterilization, indicating supercritical phase CO2 treatment did not compromise the biocompatibility of the titanium implant.

Etiology of implant orthopedic infections: a survey on 1027 clinical isolates.

In spite of the recent achievements derived from modern protocols of prophylaxis, orthopedic surgical infections still remain unacceptably frequent, especially in light of the often devastating outcomes of septic complications. The spectrum and the prevalence of the bacteria most frequently involved in orthopedic infections are here explored, with particular reference to those infections associated to implant biomaterials, which were grouped based on device typology. During a 30 months period (from September 2000 to April 2003), 1027 microbial strains were consecutively isolated from 699 patients undergoing revision surgery at the Rizzoli Orthopedic Institute. 775 (75.5%) of all these microorganisms were identified as belonging to the Staphylococcus genus, 82 (8%) to the Enterobacteriaceae family, 75 (7.3%) to the Pseudomonas genus, 54 (5.3%) to the Enterococcus genus and 20 (1.9%) to the Streptococcus genus. While confirming the importance of staphylococci as the most diffuse cause of infection, our data indicate an unexpectedly high prevalence of S. epidermidis on infected hip and knee arthroprostheses, respectively of 42% and 44%. The spectrum of bacteria infecting either internal or external fracture fixation devices appears to differ from that of hip and knee arthroprostheses and more closely resembles that of infections non-associated to medical devices, being characterized by a relatively higher prevalence of Staphylococcus aureus (over 40%) and Pseudomonas aeruginosa. Enterobacteriaceae and members of the Streptococcus and Corynebacterium genera are frequently associated with implants in which surgical incisions were made near the perineum, determining a completely altered spectrum.

Implant infection and infection resistant materials: a mini review.

Implant infection is an aggressive, often irreducible post-surgical infection. It remains the primary cause of implant failure. Bacterial contamination during surgery and subsequent adhesion onto biomaterial surface of opportunistic microorganisms, such as staphylococcal species, exopolysaccharidic slimes or specific adhesins, initiates the implant infection. Pathogenesis of periprosthestic infection is the focus of studies aimed at developing infection resistant materials.

Antibiotic resistance in Staphylococcus aureus and Staphylococcus epidermidis clinical isolates from implant orthopedic infections.

In the last decade the rising phenomenon of resistance to most common antibiotic drugs among staphylococcal clinical isolates has been a reason for serious concern and alarm. The present study investigated the prevalence of antibiotic resistance within a large microbial collection including 530 clinical strains of S. aureus and 408 strains of S. epidermidis to a panel of 16 different drugs. All strains were isolated from orthopedic infections, either associated or non-associated with implant materials. Interestingly, our data show that the profile of the prevalence of antibiotic resistance within the two species of pathogens is extremely similar for the vast majority of the drugs screened. The only statistically significant variations in prevalence concerned, in order of relevance, the following 5 out of 16 antibiotics: sulfamethoxazole (in combination with trimethoprim), erythromycin, and, to a lesser extent, oxacillin, imipenem, and clindamycin. In the case of Staphylococcus aureus, the isolates associated to implant materials were found more frequently resistant to all 4 aminoglycosides screened as well as to ciprofloxacin.

Effects of sterilization on implant mechanical property and biocompatibility.

This article concisely reviews the effects of sterilization on the mechanical properties and surface chemistries of implantable biomaterials. This article also summarizes the biological effects of the sterilization-related changes in the implant. Because there are so many different types of implant materials currently in use (including metals, polymers, and diverse biological materials), the response of tissue to these different materials varies dramatically. This review further discusses the effects of sterilization on in vivo and in vitro tissue response specifically to implantable metals and polyethylene, with the possibility of future biocompatibility testing of the implants sterilized with supercritical phase carbon dioxide sterilization.

Pre-clinical in vivo evaluation of orthopaedic bioabsorbable devices.

The presence of bioabsorbable materials in orthopaedics has grown significantly over the past two decades with applications in fracture fixation, bone replacement, cartilage repair, meniscal repair, fixation of ligaments, and drug delivery. Numerous biocompatible, biodegradable polymers are now available for both experimental and clinical use. Not surprisingly, there have been a wealth of studies investigating the biomechanical properties, biocompatibility, degradation characteristics, osteoconductivity, potential toxicity, and histologic effects of various materials. Promising results have been reported in the areas of fracture fixation, ligament repair, and drug delivery. In this article we review the pre-clinical in vivo testing of bioabsorbable devices with particular emphasis on implants used for these applications.

An expandable anchor for fixation in osteoporotic bone.

With the aging population, osteoporosis and osteoporotic fractures are becoming more prevalent. Adequate screw fixation in this type of bone is difficult. Screws are often cemented in bone to help obtain purchase. However, cement augmentation is not without problems. Here we present an expandable anchor for fixation in osteoporotic bone that does not require cement. We compared the ultimate holding power of this expandable anchor to a standard solid screw of similar dimensions. The solid screw and the expandable anchor were both placed into fresh frozen lumbar vertebral bodies and pulled out using a mechanical testing system. The expandable anchor had a 74% greater holding power compared to the standard screw (P = 0.02). The expandable anchor provides a significant increase in holding power without the problems associated with cement. This prototype anchor is promising for fixation in osteoporotic bone and warrants further evaluation.

Influence of biomaterial surface texture on bone ingrowth in the rabbit femur.

The purpose of this study was to examine both the histologic and the mechanical characteristics of bone apposition to an experimental surface, arc-deposited titanium, in a rabbit model and to compare them with those of four previously studied surfaces: one layer of cobalt-chromium beads, three layers of cobalt-chromium beads, plasma-sprayed cobalt-chromium, and uncoated titanium alloy. Bilateral cylindrical implants were press-fit into the lateral femoral condyles of 70 adult New Zealand White rabbits, which were allowed unrestricted activity and then killed at 6 or 12 weeks. The distal femora were harvested, radiographed, and prepared for either mechanical or histologic evaluation. All of the implants with coated surfaces had significantly greater shear strength than the implants of grit-blasted titanium alloy after both 6 and 12 weeks. After 6 weeks, maximum bone apposition occurred in the beaded surfaces. After 12 weeks, the shear strengths and bone apposition of implants of arc-deposited titanium and of one and three layers of cobalt-chromium beads were significantly greater than those of implants of plasma-sprayed cobalt-chromium and grit-blasted titanium alloy. The histologic studies correlated with the mechanical results. After 12 weeks, the bone apposition and mechanical stability of arc-deposited titanium were similar to those of a single layer of beads. There appeared to be no advantage to multiple layers of beads, and the plasma-sprayed cobalt-chromium and grit-blasted titanium surfaces showed lower shear strength and bone apposition than the other groups.