Continuing benefits of the Montreal Protocol and protection of the stratospheric ozone layer for human health and the environment.

The protection of Earth's stratospheric ozone (O3) is an ongoing process under the auspices of the universally ratified Montreal Protocol and its Amendments and adjustments. A critical part of this process is the assessment of the environmental issues related to changes in O3. The United Nations Environment Programme's Environmental Effects Assessment Panel provides annual scientific evaluations of some of the key issues arising in the recent collective knowledge base. This current update includes a comprehensive assessment of the incidence rates of skin cancer, cataract and other skin and eye diseases observed worldwide; the effects of UV radiation on tropospheric oxidants, and air and water quality; trends in breakdown products of fluorinated chemicals and recent information of their toxicity; and recent technological innovations of building materials for greater resistance to UV radiation. These issues span a wide range of topics, including both harmful and beneficial effects of exposure to UV radiation, and complex interactions with climate change. While the Montreal Protocol has succeeded in preventing large reductions in stratospheric O3, future changes may occur due to a number of natural and anthropogenic factors. Thus, frequent assessments of potential environmental impacts are essential to ensure that policies remain based on the best available scientific knowledge.

Effects of UV radiation on natural and synthetic materials.

The deleterious effects of solar ultraviolet (UV) radiation on construction materials, especially wood and plastics, and the consequent impacts on their useful lifetimes, are well documented in scientific literature. Any future increase in solar UV radiation and ambient temperature due to climate change will therefore shorten service lifetimes of materials, which will require higher levels of stabilisation or other interventions to maintain their lifetimes at the present levels. The implementation of the Montreal Protocol and its amendments on substances that deplete the ozone layer, controls the solar UV-B radiation received on Earth. This current quadrennial assessment provides a comprehensive update on the deleterious effects of solar UV radiation on the durability of natural and synthetic materials, as well as recent innovations in better stabilising of materials against solar UV radiation-induced damage. Pertinent emerging technologies for wood and plastics used in construction, composite materials used in construction, textile fibres, comfort fabric, and photovoltaic materials, are addressed in detail. Also addressed are the trends in technology designed to increase sustainability via replacing toxic, unsustainable, legacy additives with 'greener' benign substitutes that may indirectly affect the UV stability of the redesigned materials. An emerging class of efficient photostabilisers are the nanoscale particles that include oxide fillers and nanocarbons used in high-performance composites, which provide good UV stability to materials. They also allow the design of UV-shielding fabric materials with impressive UV protection factors. An emerging environmental issue related to the photodegradation of plastics is the generation of ubiquitous micro-scale particles from plastic litter exposed to solar UV radiation.

The Montreal Protocol and the fate of environmental plastic debris.

Microplastics (MPs) are an emerging class of pollutants in air, soil and especially in all aquatic environments. Secondary MPs are generated in the environment during fragmentation of especially photo-oxidised plastic litter. Photo-oxidation is mediated primarily by solar UV radiation. The implementation of the Montreal Protocol and its Amendments, which have resulted in controlling the tropospheric UV-B (280-315 nm) radiation load, is therefore pertinent to the fate of environmental plastic debris. Due to the Montreal Protocol high amounts of solar UV-B radiation at the Earth's surface have been avoided, retarding the oxidative fragmentation of plastic debris, leading to a slower generation and accumulation of MPs in the environment. Quantifying the impact of the Montreal Protocol in reducing the abundance of MPs in the environment, however, is complicated as the role of potential mechanical fragmentation of plastics under environmental mechanical stresses is poorly understood.

Environmental effects of stratospheric ozone depletion, UV radiation, and interactions with climate change: UNEP Environmental Effects Assessment Panel, Update 2021.

The Environmental Effects Assessment Panel of the Montreal Protocol under the United Nations Environment Programme evaluates effects on the environment and human health that arise from changes in the stratospheric ozone layer and concomitant variations in ultraviolet (UV) radiation at the Earth's surface. The current update is based on scientific advances that have accumulated since our last assessment (Photochem and Photobiol Sci 20(1):1-67, 2021). We also discuss how climate change affects stratospheric ozone depletion and ultraviolet radiation, and how stratospheric ozone depletion affects climate change. The resulting interlinking effects of stratospheric ozone depletion, UV radiation, and climate change are assessed in terms of air quality, carbon sinks, ecosystems, human health, and natural and synthetic materials. We further highlight potential impacts on the biosphere from extreme climate events that are occurring with increasing frequency as a consequence of climate change. These and other interactive effects are examined with respect to the benefits that the Montreal Protocol and its Amendments are providing to life on Earth by controlling the production of various substances that contribute to both stratospheric ozone depletion and climate change.

Environmental effects of stratospheric ozone depletion, UV radiation, and interactions with climate change: UNEP Environmental Effects Assessment Panel, Update 2020.

This assessment by the Environmental Effects Assessment Panel (EEAP) of the United Nations Environment Programme (UNEP) provides the latest scientific update since our most recent comprehensive assessment (Photochemical and Photobiological Sciences, 2019, 18, 595-828). The interactive effects between the stratospheric ozone layer, solar ultraviolet (UV) radiation, and climate change are presented within the framework of the Montreal Protocol and the United Nations Sustainable Development Goals. We address how these global environmental changes affect the atmosphere and air quality; human health; terrestrial and aquatic ecosystems; biogeochemical cycles; and materials used in outdoor construction, solar energy technologies, and fabrics. In many cases, there is a growing influence from changes in seasonality and extreme events due to climate change. Additionally, we assess the transmission and environmental effects of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which is responsible for the COVID-19 pandemic, in the context of linkages with solar UV radiation and the Montreal Protocol.

Environmental effects of stratospheric ozone depletion, UV radiation and interactions with climate change: UNEP Environmental Effects Assessment Panel, update 2019.

This assessment, by the United Nations Environment Programme (UNEP) Environmental Effects Assessment Panel (EEAP), one of three Panels informing the Parties to the Montreal Protocol, provides an update, since our previous extensive assessment (Photochem. Photobiol. Sci., 2019, 18, 595-828), of recent findings of current and projected interactive environmental effects of ultraviolet (UV) radiation, stratospheric ozone, and climate change. These effects include those on human health, air quality, terrestrial and aquatic ecosystems, biogeochemical cycles, and materials used in construction and other services. The present update evaluates further evidence of the consequences of human activity on climate change that are altering the exposure of organisms and ecosystems to UV radiation. This in turn reveals the interactive effects of many climate change factors with UV radiation that have implications for the atmosphere, feedbacks, contaminant fate and transport, organismal responses, and many outdoor materials including plastics, wood, and fabrics. The universal ratification of the Montreal Protocol, signed by 197 countries, has led to the regulation and phase-out of chemicals that deplete the stratospheric ozone layer. Although this treaty has had unprecedented success in protecting the ozone layer, and hence all life on Earth from damaging UV radiation, it is also making a substantial contribution to reducing climate warming because many of the chemicals under this treaty are greenhouse gases.

Interactive effects of solar UV radiation and climate change on material damage.

Solar UV radiation adversely affects the properties of organic materials used in construction, such as plastics and wood. The outdoor service lifetimes of these materials are influenced by their rates of degradation under solar UV radiation as well as by other climate factors such as temperature, moisture, and atmospheric pollutants. While recovery of the stratospheric ozone layer is expected, local increases in UV radiation are still likely to occur, especially in the tropics, but also elsewhere because of climate change effects. Such increases, when taken together with an increased ambient temperature due to climate change, can significantly shorten the service lifetimes of organic building materials. Several proven technologies, including the use of UV stabilisers, surface treatments or coatings have been developed over the years to mitigate these adverse effects. While these technologies should be able to compensate for any realistic future UV radiation and climate change scenarios, they will also add significantly to the lifetime cost of material in relevant products. Shorter outdoor lifetime of the plastic components in photovoltaic (PV) modules is a serious concern in the solar energy industry. To ensure module durability over the full service-lifetime (of about ∼20 years) of the light-harvesting PV components, better stabilisation technologies are being investigated. The present trend towards more environmentally sustainable materials in building, and environmental impact of additives such as stabilisers, need to be considered in addition to their engineering performance. This may require the phasing out of some conventional additives used in plastics as well as substituting wood or other materials in place of plastics in buildings. Depending on the relative costs of mitigation, substituting more UV-stable materials for conventional ones in outdoor products may also be a viable option with some categories of products. Neither the global cost of mitigation of the effects of climate change on materials nor the long-term sustainability of the technologies available for the purpose, have been estimated. Plastic waste and litter exposed outdoors to solar UV radiation over extended periods undergo cracking and fragmentation into small pieces (of micro- and nano-scale size). Release of these fragments into the environment, particularly in the aquatic environment, poses a potential threat to marine biota. Already several hundred of species are known to ingest these fragments that can potentially accumulate additives and pollutants from water. This is a potential threat to humans because 25% of fish marketed for human consumption have been reported to contain microplastics in their digestive systems. The focus of this assessment is on recent advances in understanding the mechanisms of UV-radiation-induced degradation in materials and in assessing emerging technologies for their stabilisation against outdoor UV-degradation. A better understanding of the mechanisms of degradation will allow for innovative stabilisation approaches to be developed. Also assessed is information on the sustainability of the available and emerging UV stabilisation technologies.

Environmental effects of ozone depletion, UV radiation and interactions with climate change: UNEP Environmental Effects Assessment Panel, update 2017.

The Environmental Effects Assessment Panel (EEAP) is one of three Panels of experts that inform the Parties to the Montreal Protocol. The EEAP focuses on the effects of UV radiation on human health, terrestrial and aquatic ecosystems, air quality, and materials, as well as on the interactive effects of UV radiation and global climate change. When considering the effects of climate change, it has become clear that processes resulting in changes in stratospheric ozone are more complex than previously held. Because of the Montreal Protocol, there are now indications of the beginnings of a recovery of stratospheric ozone, although the time required to reach levels like those before the 1960s is still uncertain, particularly as the effects of stratospheric ozone on climate change and vice versa, are not yet fully understood. Some regions will likely receive enhanced levels of UV radiation, while other areas will likely experience a reduction in UV radiation as ozone- and climate-driven changes affect the amounts of UV radiation reaching the Earth's surface. Like the other Panels, the EEAP produces detailed Quadrennial Reports every four years; the most recent was published as a series of seven papers in 2015 (Photochem. Photobiol. Sci., 2015, 14, 1-184). In the years in between, the EEAP produces less detailed and shorter Update Reports of recent and relevant scientific findings. The most recent of these was for 2016 (Photochem. Photobiol. Sci., 2017, 16, 107-145). The present 2017 Update Report assesses some of the highlights and new insights about the interactive nature of the direct and indirect effects of UV radiation, atmospheric processes, and climate change. A full 2018 Quadrennial Assessment, will be made available in 2018/2019.

Consequences of stratospheric ozone depletion and climate change on the use of materials.

Materials used in the exterior of buildings and in construction are routinely exposed to solar UV radiation. Especially in the case of wood and plastic building materials, the service life is determined by their weather-induced deterioration. Any further increase in ground-level solar UV radiation, UV-B radiation in particular, will therefore reduce the outdoor service life of these products. Any increase in ambient temperature due to climate change will also have the same effect. However, the existing light-stabilizer technologies are likely to be able to mitigate the additional damaging effects due to increased solar UV radiation and maintain the outdoor lifetimes of these materials at the present levels. These mitigation choices invariably increase the lifetime cost of these products. A reliable estimate of what this additional cost might be for different products is not available at the present time. Personal exposure to UV radiation is reduced both by clothing fabrics and glass windows used in buildings and automobiles. This assessment describes how the recent technical advances in degradation and stabilization techniques impact the lifetimes of plastics and wood products routinely exposed to solar UV radiation and the protection to humans offered by materials against solar UV radiation.

Oxidation and fragmentation of plastics in a changing environment; from UV-radiation to biological degradation.

Understanding the fate of plastics in the environment is of critical importance for the quantitative assessment of the biological impacts of plastic waste. Specially, there is a need to analyze in more detail the reputed longevity of plastics in the context of plastic degradation through oxidation and fragmentation reactions. Photo-oxidation of plastic debris by solar UV radiation (UVR) makes material prone to subsequent fragmentation. The fragments generated following oxidation and subsequent exposure to mechanical stresses include secondary micro- or nanoparticles, an emerging class of pollutants. The paper discusses the UV-driven photo-oxidation process, identifying relevant knowledge gaps and uncertainties. Serious gaps in knowledge exist concerning the wavelength sensitivity and the dose-response of the photo-fragmentation process. Given the heterogeneity of natural UV irradiance varying from no exposure in sediments to full UV exposure of floating, beach litter or air-borne plastics, it is argued that the rates of UV-driven degradation/fragmentation will also vary dramatically between different locations and environmental niches. Biological phenomena such as biofouling will further modulate the exposure of plastics to UV radiation, while potentially also contributing to degradation and/or fragmentation of plastics independent of solar UVR. Reductions in solar UVR in many regions, consequent to the implementation of the Montreal Protocol and its Amendments for protecting stratospheric ozone, will have consequences for global UV-driven plastic degradation in a heterogeneous manner across different geographic and environmental zones. The interacting effects of global warming, stratospheric ozone and UV radiation are projected to increase UV irradiance at the surface in localized areas, mainly because of decreased cloud cover. Given the complexity and uncertainty of future environmental conditions, this currently precludes reliable quantitative predictions of plastic persistence on a global scale.

Effects of solar UV and climate change on materials.

Increased solar ultraviolet radiation (UV) reaches the surface of the Earth as a consequence of a depleted stratospheric ozone layer and changes in factors such as cloud cover, land-use patterns and aerosols. Climate change is expected to result in a 1.1-6.4 °C increase in average temperature by the end of this century, depending on location. Increased levels of UV radiation, especially at high ambient temperatures, are well-known to accelerate the degradation of plastics, rubber and wood materials, thereby reducing their useful lifetimes in outdoor applications. Plastics used routinely outdoors are generally light-stabilized using chemical additives to ensure their useful lifetimes. Wood products are coated for resistance to UV radiation, since photodamage results in enhanced water-susceptibility and their consequent biodegradation under outdoor exposure. The increased damage to materials due to an increased UV-B (280-315 nm) component in solar radiation reaching the Earth likely can be countered using light-stabilization technologies, surface coatings or, in most instances, by substituting the materials in question with greater UV radiation-resistant materials. However, even if these options could be used with all common materials affected, they will invariably result in higher costs. Reliable estimates of the incremental costs involved depend on the anticipated damage and the effectiveness of mitigation strategies employed. We summarize and assess recent findings on light-induced damage to plastic materials, including wood-plastics composites and nanocomposites. The combined effect of increased UV-B radiation and ambient temperature is of special interest, since these two factors represent particularly harsh environmental conditions for most materials. Advances in approaches to light stabilization of materials are also assessed.

Microplastic pollution in Marine Protected Areas of Southern Sri Lanka.

Microplastics (MPs) are ubiquitous in marine environment. The prevalence of MPs in coastal and lagoon sediments, and water were studied in two Marine Protected Areas (MPAs); Bundala National Park (BNP) and Hikkaduwa Marine National Park (HNP) in Sri Lanka. Both areas are important for turtles, birds and coral ecosystems, all of which are particularly threatened by MPs. Abundance of MPs was generally higher in both coastal sediments and waters in HNP (111±29 MPs/m2 for sediments and 0.515±0.054 MPs/m3 for water) than in the BNP (102±16 MPs/m2 for sediments and 0.276±0.077 MPs/m3 for water). The most common shape and polymer type of MPs were fragments and Polyethylene respectively. This research is the first to survey MPs in MPAs in Sri Lanka and provides a baseline of MPs pollution in these environments for future research and management.

Evidence of microplastics pollution in coastal beaches and waters in southern Sri Lanka.

The abundance of microplastics (MPs) in surface water and beach sediment in Southern Sri Lanka covering a distance of 91 km of coastline is reported. MPs were classified according to polymer type, geometry and color of the sites tested 60% showed MP contamination in sand and 70% in surface waters off the coast. The size range of MPs from surface waters and beaches were to 1.5-2.5 mm and 3-4.5 mm, respectively. Majority of these were identified as polyethylene (PE) and polypropylene (PP) with some polystyrene (PS) foam at a few sites. Fragments derived from larger debris appears to be the dominant type of MP at most sites and only 2 sites showed virgin pellets that accounted for 14% of the samples collected.

Effects of increased solar ultraviolet radiation on materials.

Synthetic polymers such as plastics, as well as naturally occurring polymer materials such as wood, are extensively used in building construction and other outdoor applications where they are routinely exposed to sunlight. The UV-B content in sunlight is well known to affect adversely the mechanical properties of these materials, limiting their useful life. Presently their outdoor lifetimes depend on the use of photostabilizers in the case of plastics and on protective surface coatings in the case of wood. Any increase in the solar UV-B content due to a partial ozone depletion would therefore tend to decrease the outdoor service life of these materials. It is the synergistic effect of increased UV radiation with other factors such as the temperature that would determine the extent of such reduction in service life. The increased cost associated with such a change would be felt unevenly across the globe. Those developing countries that depend on plastics as a prime material of construction and experience high ambient temperatures are likely to be particularly affected in spite of the relatively small fractional decrease in ozone at those locations. Assessment of the damage to materials, associated with ozone depletion, requires a knowledge of the wavelength dependence as well as the dose-response characteristics of the polymer degradation processes of interest. While the recent literature includes some reliable spectral sensitivity data, little dose-response information has been reported, so it is difficult to make such assessments reliably at the present time. This is particularly true for the naturally occurring materials popularly used in construction applications. To maintain polymers at the same useful lifetime in spite of increased solar UV-B content, the amount of photostabilizers used in the formulations might be increased. This strategy assumes that conventional stabilizers will continue to be effective with the spectrally altered UV-B-enhanced solar radiation. While the present understanding of the degradation chemistry suggests the strategy to have merit, its effectiveness, in an altered solar radiation environment, has not been demonstrated for common polymers. The availability of these data is crucial for reliably estimating the cost of mitigating the increased damage to materials as a result of a possible partial depletion of the ozone layer using this approach.

The Martian and extraterrestrial UV radiation environment--1. Biological and closed-loop ecosystem considerations.

The Martian surface is exposed to both UVC radiation (<280 nm) and higher doses of UVB (280-315 nm) compared to the surface of the Earth. Terrestrial organisms have not evolved to cope with such high levels of UVC and UVB and thus any attempts to introduce organisms to Mars, particularly in closed-loop life support systems that use ambient sunlight, must address this problem. Here we examine the UV radiation environment of Mars with respect to biological systems. Action spectra and UV surface fluxes are used to estimate the UV stress that both DNA and chloroplasts would experience. From this vantage point it is possible to consider appropriate measures to address the problem of the Martian UV environment for future long term human exploration and settlement strategies. Some prospects for improving the UV tolerance of organisms are also discussed. Existing artificial ecosystems such as Biosphere 2 can provide some insights into design strategies pertinent to high UV environments. Some prospects for improving the UV tolerance of organisms are also discussed. The data also have implications for the establishment of closed-loop ecosystems using natural sunlight on the lunar surface and elsewhere in the Solar System.

Effects of stratospheric ozone depletion and climate change on materials damage.

Nanoscale inorganic fillers with average particle sizes smaller by an order of magnitude or more compared to those of conventional fillers are becoming commercially available. The efficacy of these fillers used in polymer formulations and particularly their effect as photostabilizers are beginning to be investigated. These may enhance or retard photodegradation depending on the surface coating of the particles or their chemical nature. Some recent data indicate their use as effective photostabilizers in some common polymers. However, the potential deleterious interaction of the nanoscale fillers with other additives in the formulation has also been pointed out. Depending on the efficiency of stabilization and the economics of their use nanofillers may provide a useful route to UV-stabilization of plastics and rubber used outdoors. Insufficient data are available at this time to assess their potential impact on material and coatings stabilization. Organic fillers such as lignocellulose continue to be investigated for outdoor applications. Their cost advantage makes them attractive despite the somewhat reduced engineering properties of their composites. Recent reports, however, suggest the photostability of these composites to depend on the source of fiber as well as the processing techniques employed in fabricating products from them. Identification of the key determinants in terms of species, isolation and processing of polymer-wood composites is critical to developing them for long-term outdoor use. Efforts are continuing on the synthesis of new light stabilizers, particularly those based on a hindered amine light stabilizers (HALS), and on identifying synergistic combinations of known stabilizers for common thermoplastics. Variants of HALS-type stabilizers that reduce the loss of stabilizer via leaching or migration were recently reported. Studies on the permanence of the stabilizers themselves when exposed to solar UV wavelengths have also been reported in recent work. Identification of relevant mechanisms is important not only to understand the interactions of climate changes and higher UV solar environments with materials damage, but also to guide future design of light-stabilizers.

Burst testing of condoms. I. Basic features of the force-deformation curve of latex-rubber condoms.

Inflation of a rubber condom involves biaxial deformation of the material which can be modeled by the use of an appropriate strain-energy function. Force versus deformation data for uniaxial extension of strips of condoms were used to determine the parameters for Ogden's form of a strain-energy function. These parameters were then used to fit experimentally obtained burst test data to a stress-strain equation formulated for inflation of condoms in a burst test. Experimental data on inflation of condoms agree well with theoretical curves verifying the applicability of the biaxial stress-strain equation to the particular strain-energy function on which it is based.