A method to measure mechanical properties of pulmonary epithelial cell layers.

The lung has a huge inner alveolar surface composed of epithelial cell layers. The knowledge about mechanical properties of lung epithelia is helpful to understand the complex lung mechanics and biomechanical interactions. Methods have been developed to determine mechanical indices (e.g., tissue elasticity) which are both very complex and in need of costly equipment. Therefore, in this study, a mechanostimulator is presented to dynamically stimulate lung epithelial cell monolayers in order to determine their mechanical properties based on a simple mathematical model. First, the method was evaluated by comparison to classical tensile testing using silicone membranes as substitute for biological tissue. Second, human pulmonary epithelial cells (A549 cell line) were grown on flexible silicone membranes and stretched at a defined magnitude. Equal secant moduli were determined in the mechanostimulator and in a conventional tension testing machine (0.49 ± 0.05 MPa and 0.51 ± 0.03 MPa, respectively). The elasticity of the cell monolayer could be calculated by the volume-pressure relationship resulting from inflation of the membrane-cell construct. The secant modulus of the A549 cell layer was calculated as 0.04 ± 0.008 MPa. These findings suggest that the mechanostimulator may represent an adequate device to determine mechanical properties of cell layers.

Mechanostimulation, electrostimulation and force measurement in an in vitro model of the isolated rat diaphragm.

In an in vitro model of the entire rat diaphragm, diaphragmatic contraction forces at defined preload levels were investigated. A total of 24 excised rat diaphragms were electrically stimulated inside a two-chamber strain-applicator. The resulting contraction forces were determined on eight adjusted preload levels via measuring the elicited pressure in the chamber below the diaphragm. Subsequently, diaphragms were exposed for 6 h to one of four treatments: (1) control, (2) cyclic mechanical stretch, (3) intermittent electrical stimulation or (4) combination of cyclic mechanical stretch and electrical stimulation. Diaphragmatic contraction force increased from 116 ± 21 mN at the lowest preload level to 775 ± 85 mN at the maximal preload level. After 6 h maximal muscle contraction forces were smallest after non-electrostimulated treatment (control: 81 ± 15 mN, mechanical deflection: 94 ± 12 mN) and largest after electrostimulation treatment (mere electrostimulation: 165 ± 20 mN, combined mechano- and electro-stimulation: 164 ± 14 mN). We conclude that our model allows force measurements on isolated rat diaphragms. Furthermore, we conclude that by intermediate electrical stimulation diaphragmatic force generation was better preserved than by mechanical stimulation.

Characteristics of highly flexible PDMS membranes for long-term mechanostimulation of biological tissue.

Measurement of mechanical properties of soft biological tissue remains a challenging task in mechanobiology. Recently, we presented a bioreactor for simultaneous mechanostimulation and analysis of the mechanical properties of soft biological tissue samples. In this bioreactor, the sample is stretched via deflection of a flexible membrane. It was found that the use of highly compliant membranes increases accuracy of measurements. Here, we describe the production process and characteristics of thin and flexible membranes of polydimethylsiloxane (PDMS) designed to improve the signal-to-noise ratio of our bioreactor. By a spin-coating process, PDMS membranes were built by polymerization of a two component elastomer. The influence of resin components proportion, rotation duration, and speed of the spinning were related to the membrane mechanics. Membranes of 22 mm inner diameter and 33 to 36 microm thickness at homogeneous profiles were produced. Isolated rat diaphragms served as biological tissue samples. Mechanical properties of the membranes remained constant during 24 h of mechanostimulation. In contrast, time- and strain-dependent mechanical properties of the diaphragms were found.