RESUMO
A nanocomposite based on nanofibrillar cellulose (NFC) coated with gold-silver (core-shell) nanoparticles (Au@Ag NPs) was developed as a novel surface-enhanced Raman spectroscopy (SERS) substrate. SERS performance of NFC/Au@Ag NP nanocomposite was tested by 4-mercaptobenzoic acid. The cellulose nanofibril network was a suitable platform that allowed Au@Ag NPs to be evenly distributed and stabilized over the substrate, providing more SERS hotspots for the measurement. Two pesticides, thiram and paraquat, were successfully detected either individually or as a mixture in lettuce by SERS coupled with the nanocomposite. Strong Raman scattering signals for both thiram and paraquat were obtained within a Raman shift range of 400-2000 cm-1 and a Raman intensity ~ 8 times higher than those acquired by NFC/Au NP nanocomposite. Characteristic peaks were clearly observable in all SERS spectra even at a low concentration of 10 µg/L of pesticides. Limit of detection values of 71 and 46 µg/L were obtained for thiram and paraquat, respectively. Satisfactory SERS performance, reproducibility, and sensitivity of NFC/Au@Ag NP nanocomposite validate its applicability for real-world analysis to monitor pesticides and other contaminants in complex food matrices within a short acquisition time. Graphical abstract.
Assuntos
Celulose/química , Lactuca/química , Nanopartículas Metálicas/química , Nanocompostos/química , Paraquat/análise , Tiram/análise , Ouro/química , Limite de Detecção , Praguicidas/análise , Reprodutibilidade dos Testes , Prata/química , Análise Espectral RamanRESUMO
Herein, we developed a surface-enhanced Raman spectroscopy (SERS) optofluidic sensor coupled with immunoprobes to simultaneously separate and detect the foodborne pathogens, Escherichia coli O157:H7, and Salmonella in lettuce and packed salad. The method consists of three steps of (i) enrichment to enhance detection sensitivity, (ii) selective separation and labelling of target bacteria by their specific antibody-bearing SERS-nanotags and (iii) detection of tagged bacterial cells using SERS within a hydrodynamic flow-focusing SERS optofluidic device, where even low counts of bacterial cells were detectable in the very thin-film-like sample stream. SERS-nanotags consisted of different Raman reporter molecules, representing each species, i.e., the detection of Raman reporter confirms the presence of the target pathogen. The anti-E. coli antibody used in this study functions against all strains of E. coli O157:H7 and the anti-Salmonella antibody used in this work acts on a wide range of Salmonella enterica strains. Bacterial counts of 1000, 100, and 10 CFU/ 200 g sample were successfully detected after only 15 min enrichment. Our method showed a very low detection limit value of 10 CFU/ 200 g sample for the bacterial mixture in both lettuce and packed salad, proving the efficiency and high sensitivity of our method to detect multiple pathogens in the food samples. The total analysis time, including sample preparation for simultaneous detection of multiple bacteria, was estimated to be 2 h, which is much less than the time required in conventional methods. Hence, our proposed protocol is considered a promising rapid and efficient approach for pathogen screening of food samples.
Assuntos
Escherichia coli O157 , Microbiologia de Alimentos , Imunoensaio/métodos , Análise Espectral Raman/métodos , Lactuca/microbiologia , SalmonellaRESUMO
This study developed an in-field analytical technique for food samples by integrating filtration into a surface-enhanced Raman spectroscopy (SERS) microchip. This microchip embedded a filter membrane in the chip inlet to eliminate interfering particulates and enrich target analytes. The design and geometry of the channel were optimised by finite-elemental method (FEM) to tailor variations of flow velocity (within 0-24 µL/s) and facilitate efficient mixing of the filtrate with nanoparticles in two steps. Four pesticides (thiabendazole, thiram, endosulfan, and malathion) were successfully detected either individually or as a mixture in strawberries using this sensor. Strong Raman signals were obtained for the four studied pesticides and their major peaks were clearly observable even at a low concentration of 5 µg/kg. Limits of detection of four pesticides in strawberry extract were in the range of 44-88 µg/kg, showing good sensitivity of the sensor to the target analytes. High selectivity of the sensor was also proved by successful detection of each individual pesticide as a mixture in strawberry matrices. High recoveries (90-122%) were achieved for the four pesticides in the strawberry extract. This sensor is the first filter-based SERS microchip for identification and quantification of multiple target analytes in complex food samples.
Assuntos
Análise de Elementos Finitos , Análise de Alimentos , Contaminação de Alimentos/análise , Fragaria/química , Dispositivos Lab-On-A-Chip , Praguicidas/análise , Análise de Alimentos/instrumentação , Análise Espectral Raman/instrumentação , Propriedades de SuperfícieRESUMO
A cryogel-based semi-interpenetrating polymer network (Cryo-SIPN) was prepared in which conductive polymers such as polyaniline (PANI) and polypyrrole (PPy) were formed within the super porous network of acrylic acid cryogel. For completion of cryo-polymerization, all the constituent solutions were severely mixed and placed into the plastic straws and kept at -20°C and then the synthesized cyrogels were cut into the 1-cm length and freeze dried after washing with water. The Cryo-SIPN polymeric composite was applied in micro solid phase extraction (µSPE) of some selected antibiotic residues from various samples. The µSPE method combined with a high performance liquid chromatography-ultraviolet (HPLC-UV) system allowed trace quantification of antibiotic residues in the honey and water samples while the significant variables were optimized using a central composite design (CCD) to find optimum conditions. The method performance was satisfactory with recovery ranges from 70.0 to 109%. The limits of detection (S/N = 3) and quantification (S/N = 10) for all samples were within the 17-50 µg kg-1 and 47-140 µg kg-1 range, respectively. The relative standard deviation was less than 10 % for antibiotics in the foodstuff and water samples. The validated Cryo-SIPN-µSPE in conjunction with HPLC-UV, proved to be versatile, efficient and robust while its capability toward the trace determination of drugs residues in real-life samples is demonstrated in this work.
Assuntos
Mel , Polímeros , Antibacterianos , Cromatografia Líquida de Alta Pressão , Mel/análise , Limite de Detecção , Porosidade , Pirróis , Extração em Fase Sólida , Águas ResiduáriasRESUMO
A complementary site selective ortho- vs ipso-amination of aryl halides using non-electrophilic amine sources for construction of indole scaffolds is reported. A palladium-catalyzed alkyne insertion/C-H activation/palladacycle amination via merger of three easily diversified components including iodoarenes, alkynes, and amines delivers indoles with different substitution patterns even in gram scales. By employing ortho-bromoanilines, a consecutive annulative π-extension of indoles proceeds to construct indolo[1,2-f]phenanthridine scaffolds via four C-C and C-N bond formations in one pot.
RESUMO
An imprinted interpenetrating polymer network (IPN) was synthesized and used as a medium for isolation of carbamazepine from urine samples. The polymer network consisted of a homogeneous polystyrene-sol gel hybrid constructed by in-situ radical polymerization method. In this process, within the sol-gel reaction duration, styrene monomer could penetrate into the reaction mixture and after the polymerization initiation, a monolithic IPN structure was prepared. The scanning electron microscopy (SEM) image and energy dispersive spectroscopy (EDX) are indications of the polystyrene dispersion at nano- to micro-meter level in the sol gel matrix. Eventually, the synthesized IPN was used as a sorbent in microextraction in packed syringe (MEPS) combined with high performance liquid chromatography (HPLC) for isolation of carbamazepine, naproxen and dexamethasone from urine samples. The molecularly imprinted IPN showed some degree of selectivity towards carbamazepine. To assess the important parameters influencing the extraction and desorption processes, an experimental design strategy was used. By the current method, low limits of detection (1.3-1.5µgL-1) and quantification (4.2-5µgL-1) were achieved (hydrocortisone as the internal standard). The intra- and inter-day precision data at 50 and 300µgL-1 were 1.3-7.4%, while the working linear dynamic range was from 4.2 to 500µgL-1.
Assuntos
Carbamazepina , Microextração em Fase Líquida , Impressão Molecular , Polímeros/química , Carbamazepina/química , Carbamazepina/isolamento & purificação , Carbamazepina/urina , Cromatografia Líquida de Alta Pressão/métodos , Humanos , Microextração em Fase Líquida/instrumentação , Microextração em Fase Líquida/métodos , Impressão Molecular/instrumentação , Impressão Molecular/métodos , SeringasRESUMO
A magnetic nanocomposite consisting of nanoparticles-polybutylene terephthalate (MNPs-PBT) was electrospun and used as an extracting medium for an on-line µ-solid phase extraction (µ-SPE)-high performance liquid chromatography (HPLC) set-up with an ultraviolet (UV) detection system. Due to the magnetic property of the prepared nanofibers, the whole extraction procedure was implemented under an external magnetic field to enhance the extraction efficiencies. The developed method along with the synthesized nanocomposite were found to be appropriate for the determination of trace levels of selected drugs including furosemide, naproxen, diclofenac and clobetasol propionate in the urine sample. The prepared MNPs-PBT electrospun nanocomposite was characterized using the scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and Fourier transform infrared (FT-IR) spectroscopy. The prepared magnetic fibers showed high porosity, which was another driving force for the extraction efficiency enhancement. Major parameters affecting the extraction efficiency of the selected drugs were optimized. The limits of detections (LOD) of the studied drugs were in the range of 0.4-1.6 µg L(-1) and the limits of quantification (LOQ) were 1-4 µg L(-1) under the optimized conditions. Relative standard deviation (RSD%) for three replicates at three concentration levels of 6, 100 and 400 µg L(-1) were 5.9-8.0% while acceptable linear range with two orders of magnitude was obtained (R(2) = 0.99). The method was validated by the determination of the selected drugs in urine samples and the results indicated that this method has sufficient potential for enrichment and determination of the desired drugs in the urine sample. The relative recovery values were found to be in the range of 78-91%. Implementing the developed on-line µ-SPE method under the external magnetic field induction, led to higher extraction efficiencies for the selected drugs with various diamagnetic properties.