Management of Phytophthora parasitica causing gummosis in citrus using biogenic copper oxide nanoparticles.

AIM: The main aim of the present study was to develop nanotechnology-based solutions for the management of a fungus, Phytophthora parasitica causing gummosis in citrus. METHODS AND RESULTS: Biogenic copper nanoparticles (CuONPs) were synthesized using two different biocontrol agents, Pseudomonas fluorescens and Trichoderma viride and characterized using different analytical techniques. Furthermore, in vitro (at the concentrations of 10, 15, 30, 50, 70, 100 and 150 mg/L) and in vivo (at the concentration of 100 mg/L) activities of these nanoparticles were evaluated for their antifungal efficacy against P. parasitica. The results obtained confirmed the synthesis of irregular-shaped CuONPs having a size in the range 40-100 nm in case of P. fluorescens, whereas, spherical CuONPs in the size range 20-80 were recorded in case of T. viride. As far as the in vitro antifungal efficacies of both these CuONPs is concerned, the maximum percent growth inhibition was observed in case of CuONPs synthesized from T. viride compared to CuONPs from P. fluorescens. However, in case of in vivo antifungal efficacies, CuONPs synthesized from T. viride showed the activity significantly higher than the conventionally used Bordeaux mixture. CONCLUSIONS: It can be concluded that biosynthesized CuONPs can be effectively used as a potential fungicide against P. parasitica. SIGNIFICANCE AND IMPACT OF THE STUDY: The application of nanoparticles having antifungal activities can be used as alternative fungicides to the conventional chemical fungicides. It has the potential to revolutionize the existing management strategies available for plant pathogenic fungi.

Mycosynthesis of Metal-Containing Nanoparticles-Fungal Metal Resistance and Mechanisms of Synthesis.

In the 21st century, nanomaterials play an increasingly important role in our lives with applications in many sectors, including agriculture, biomedicine, and biosensors. Over the last two decades, extensive research has been conducted to find ways to synthesise nanoparticles (NPs) via mediation with fungi or fungal extracts. Mycosynthesis can potentially be an energy-efficient, highly adjustable, environmentally benign alternative to conventional physico-chemical procedures. This review investigates the role of metal toxicity in fungi on cell growth and biochemical levels, and how their strategies of resistance, i.e., metal chelation, biomineral formation, biosorption, bioaccumulation, compartmentalisation, and efflux of metals from cells, contribute to the synthesis of metal-containing NPs used in different applications, e.g., biomedical, antimicrobial, catalytic, biosensing, and precision agriculture. The role of different synthesis conditions, including that of fungal biomolecules serving as nucleation centres or templates for NP synthesis, reducing agents, or capping agents in the synthesis process, is also discussed. The authors believe that future studies need to focus on the mechanism of NP synthesis, as well as on the influence of such conditions as pH, temperature, biomass, the concentration of the precursors, and volume of the fungal extracts on the efficiency of the mycosynthesis of NPs.

Mycosynthesis of Metal-Containing Nanoparticles-Synthesis by Ascomycetes and Basidiomycetes and Their Application.

Fungi contain species with a plethora of ways of adapting to life in nature. Consequently, they produce large amounts of diverse biomolecules that can be generated on a large scale and in an affordable manner. This makes fungi an attractive alternative for many biotechnological processes. Ascomycetes and basidiomycetes are the most commonly used fungi for synthesis of metal-containing nanoparticles (NPs). The advantages of NPs created by fungi include the use of non-toxic fungus-produced biochemicals, energy efficiency, ambient temperature, pressure conditions, and the ability to control and tune the crystallinity, shape, and size of the NPs. Furthermore, the presence of biomolecules might serve a dual function as agents in NP formation and also capping that can tailor the (bio)activity of subsequent NPs. This review summarizes and reviews the synthesis of different metal, metal oxide, metal sulfide, and other metal-based NPs mediated by reactive media derived from various species. The phyla ascomycetes and basidiomycetes are presented separately. Moreover, the practical application of NP mycosynthesis, particularly in the fields of biomedicine, catalysis, biosensing, mosquito control, and precision agriculture as nanofertilizers and nanopesticides, has been studied so far. Finally, an outlook is provided, and future recommendations are proposed with an emphasis on the areas where mycosynthesized NPs have greater potential than NPs synthesized using physicochemical approaches. A deeper investigation of the mechanisms of NP formation in fungi-based media is needed, as is a focus on the transfer of NP mycosynthesis from the laboratory to large-scale production and application.

Emerging Trends in Pullulan-Based Antimicrobial Systems for Various Applications.

Global reports on multidrug resistance (MDR) and life-threatening pathogens such as SARS-CoV-2 and Candida cruris have stimulated researchers to explore new antimicrobials that are eco-friendly and economically viable. In this context, biodegradable polymers such as nisin, chitin, and pullulan play an important role in solving the problem. Pullulan is an important edible, biocompatible, water-soluble polymer secreted by Aureobasidium pullulans that occurs ubiquitously. It consists of maltotriose units linked with α-1,6 glycosidic bonds and is classed as Generally Regarded as Safe (GRAS) by the Food and Drug Administration (FDA) in the USA. Pullulan is known for its antibacterial, antifungal, antiviral, and antitumor activities when incorporated with other additives such as antibiotics, drugs, nanoparticles, and so on. Considering the importance of its antimicrobial activities, this polymer can be used as a potential antimicrobial agent against various pathogenic microorganisms including the multidrug-resistant (MDR) pathogens. Moreover, pullulan has ability to synthesize biogenic silver nanoparticles (AgNPs), which are remarkably efficacious against pathogenic microbes. The pullulan-based nanocomposites can be applied for wound healing, food packaging, and also enhancing the shelf-life of fruits and vegetables. In this review, we have discussed biosynthesis of pullulan and its role as antibacterial, antiviral, and antifungal agent. Pullulan-based films impregnated with different antimicrobials such as AgNPs, chitosan, essential oils, and so on, forming nanocomposites have also been discussed as natural alternatives to combat the problems posed by pathogens.

Intraoperative Microvascular Complications in Autologous Breast Reconstruction: The Effects of Resident Training on Microsurgical Outcomes.

BACKGROUND: Academic medical centers with large volumes of autologous breast reconstruction afford residents hand-on educational experience in microsurgical techniques. We present our experience with autologous reconstruction (deep inferior epigastric perforators, profunda artery perforator, lumbar artery perforator, bipedicled, and stacked) where a supervised trainee completed the microvascular anastomosis. METHODS: Retrospective chart review was performed on 413 flaps (190 patients) with microvascular anastomoses performed by postgraduate year (PGY)-4, PGY-5, PGY-6, PGY-7 (microsurgery fellow), or attending physician (AP). Comorbidities, intra-operative complications, revisions, operative time, ischemia time, return to operating room (OR), and flap losses were compared between training levels. RESULTS: Age and all comorbidities were equivalent between groups. Total operative time was highest for the AP group. Flap ischemia time, return to OR, and intraoperative complication were equivalent between groups. Percentage of flaps requiring at least one revision of the original anastomosis was significantly higher in PGY-4 and AP than in microsurgical fellows: PGY-4 (16%), PGY-5 (12%), PGY-6 (7%), PGY-7 (2.1%), and AP (16%), p = 0.041. Rates of flap loss were equivalent between groups, with overall flap loss between all groups 2/413 (<1%). CONCLUSION: With regard to flap loss and microsurgical vessel compromise, lower PGYs did not significantly worsen surgical outcomes for patients. AP had the longest total operative time, likely due to flap selection bias. PGY-4 and AP groups had higher rates of revision of original anastomosis compared with PGY-7, though ultimately these differences did not impact overall operative time, complication rate, or flap losses. Hands-on supervised microsurgical education appears to be both safe for patients, and also an effective way of building technical proficiency in plastic surgery residents.

The emerging role of metallic nanoparticles in food.

Nanotechnology is widely used in biomedical applications, engineering sciences, and food technology. The application of nanocompounds play a pivotal role in food protection, preservation, and increasing its shelf life. The changing lifestyle, use of pesticides, and biological and/or chemical contaminants present in food directly affect its quality. Metallic nanoparticles (MNPs) are useful to develop products with antimicrobial activity and with the potential to improve shelf life of food and food products. Due to the prevention of microbial growth, MNPs have attracted the attention of researchers. Biopolymers/polymers can be easily combined with different MNPs which act as a vehicle not only for one type of particles but also as a hybrid system that allows a combination of natural compounds with metallic nanocompounds. However, there is a need for risk evaluation to use nanoparticles in food packaging. In this review, we aim to discuss how MNPs incorporated into polymers/biopolymers matrices can be used for food preservation, considering the quality and safety, which are desirable in food technology.

Evaluation of antibacterial efficacy of sulfur nanoparticles alone and in combination with antibiotics against multidrug-resistant uropathogenic bacteria.

Urinary tract infections (UTIs) have been frequently reported from different parts of the world. The current knowledge on distribution of causative agents of urinary infections and antibiotics susceptibility pattern is essentially required. In the present study, total 351 uropathogenic bacteria were isolated; among them most prevalent were Escherichia coli (75%), followed by Pseudomonas aeruginosa (8%), Proteus mirabilis (6%), Klebsiella pneumoniae (4%), Staphylococcus aureus (4%) and Enterococcus faecalis (3%). Most isolates of uropathogenic bacteria showed resistance to amoxicillin and trimethoprim, followed by chloramphenicol and kanamycin. Biosynthesis of sulfur nanoparticles (SNPs) was performed by co-precipitation method using sodium thiosulfate in presence of Catharanthus roseus leaf extract. The characterization data showed that SNPs were polydispersed, spherical in shape with size range of 20-86 nm and having negative zeta potential of -9.24 mV. The potential antibacterial activity was observed for SNPs alone and in combination with antibiotics particularly amoxicillin and trimethoprim against majority of the uropathogens. The synergistic effect yielded increase in fold area with high activity index against tested uropathogens. Based on overall results, it can be recommended to use SNPs for the management of UTI alone and also in combination with antibiotics.

Marine-derived Phoma-the gold mine of bioactive compounds.

The genus Phoma contains several species ubiquitously present in soil, water, and environment. There are two major groups of Phoma, viz., terrestrial and marine. After 1981 researchers all over the world have focused on marine-derived Phoma for their bioactive compounds. The marine Phoma are very rich sources for novel bioactive secondary metabolites, which could potentially be used as drugs. Recently, a large number of structurally unique metabolites with potential biological and pharmacological activities have been isolated from the marine Phoma species particularly Phoma herbarum, P. sorghina, and P. tropica. These metabolites mainly include diterpenes, enolides, lactones, quinine, phthalate, and anthraquinone. Most of these compounds possess antimicrobial, anticancer, radical scavenging, and cytotoxic properties. The present review has been focused on the general background of Phoma, current approaches used for its identification and their limitations, difference between terrestrial and marine Phoma species. In addition, this review summarizes the novel bioactive compounds derived from marine Phoma and their biological activities.

Effective management of soft rot of ginger caused by Pythium spp. and Fusarium spp.: emerging role of nanotechnology.

Ginger (Zingiber officinale Rosc.) is a tropical plant cultivated all over the world due to its culinary and medicinal properties. It is one of the most important spices commonly used in food, which increases its commercial value. However, soft rot (rhizome rot) is a common disease of ginger caused by fungi such as Pythium and Fusarium spp. It is the most destructive disease of ginger, which can reduce the production by 50 to 90%. Application of chemical fungicides is considered as an effective method to control soft rot of ginger but extensive use of fungicides pose serious risk to environmental and human health. Therefore, the development of ecofriendly and economically viable alternative approaches for effective management of soft rot of ginger such diseases is essentially required. An acceptable approach that is being actively investigated involves nanotechnology, which can potentially be used to control Pythium and Fusarium. The present review is aimed to discuss worldwide status of soft rot associated with ginger, the traditional methods available for the management of Pythium and Fusarium spp. and most importantly, the role of various nanomaterials in the management of soft rot of ginger. Moreover, possible antifungal mechanisms for chemical fungicides, biological agents and nanoparticles have also been discussed.

Pressure-Induced Charge Transfer Doping of Monolayer Graphene/MoS2 Heterostructure.

A unique way of achieving controllable, pressure-induced charge transfer doping in the graphene/MoS2 heterostructure is proposed. The charge transfer causes an upward shift in the Dirac point with respect to Fermi level at a rate of 15.7 meV GPa(-1) as a function of applied hydrostatic pressure, leading to heavy p-type doping in graphene. The doping was confirmed by I2D /IG measurements.

Strategic role of selected noble metal nanoparticles in medicine.

Noble metals and their compounds have been used as therapeutic agents from the ancient time in medicine for the treatment of various infections. Recently, much progress has been made in the field of nanobiotechnology towards the development of different kinds of nanomaterials with a wide range of applications. Among the metal nanoparticles, noble metal nanoparticles have demonstrated potential biomedical applications. Due to the small size, nanoparticles can easily interact with biomolecules both at surface and inside cells, yielding better signals and target specificity for diagnostics and therapeutics. Noble metal nanoparticles inspired the researchers due to their remarkable role in detection and treatment of dreadful diseases. In this review, we have attempted to focus on the biomedical applications of noble metal nanoparticles particularly, silver, gold, and platinum in diagnosis and treatment of dreaded diseases such as cancer, human immunodeficiency virus (HIV), tuberculosis (TB), and Parkinson disease. In addition, the role of silver nanoparticles (AgNPs) such as novel antimicrobials, gold nanoparticles (AuNPs) such as efficient drug carrier, uses of platinum nanoparticles (PtNPs) in bone allograft, dentistry, etc. have been critically reviewed. Moreover, the toxicity due to the use of metal nanoparticles and some unsolved challenges in the field have been discussed with their possible solutions.

Metal nanoparticles: The protective nanoshield against virus infection.

Re-emergence of resistance in different pathogens including viruses are the major cause of human disease and death, which is posing a serious challenge to the medical, pharmaceutical and biotechnological sectors. Though many efforts have been made to develop drug and vaccines against re-emerging viruses, researchers are continuously engaged in the development of novel, cheap and broad-spectrum antiviral agents, not only to fight against viruses but also to act as a protective shield against pathogens attack. Current advancement in nanotechnology provides a novel platform for the development of potential and effective agents by modifying the materials at nanolevel with remarkable physicochemical properties, high surface area to volume ratio and increased reactivity. Among metal nanoparticles, silver nanoparticles have strong antibacterial, antifungal and antiviral potential to boost the host immunity against pathogen attack. Nevertheless, the interaction of silver nanoparticles with viruses is a largely unexplored field. The present review discusses antiviral activity of the metal nanoparticles, especially the mechanism of action of silver nanoparticles, against different viruses such HSV, HIV, HBV, MPV, RSV, etc. It is also focused on how silver nanoparticles can be used in therapeutics by considering their cytotoxic level, to avoid human and environmental risks.

The role of nanotechnology in control of human diseases: perspectives in ocular surface diseases.

Nanotechnology is the creation and use of materials and devices on the same scale as molecules and intracellular structures, typically less than 100 nm in size. It is an emerging science and has made its way into pharmaceuticals to significantly improve the delivery and efficacy of drugs in a number of therapeutic areas, due to development of various nanoparticle-based products. In recent years, there has been increasing evidence that nanotechnology can help to overcome many of the ocular diseases and hence researchers are keenly interested in this science. Nanomedicines offer promise as viable alternatives to conventional drops, gels or ointments to improve drug delivery to the eye. Because of their small size, they are well tolerated, thus preventing washout, increase bioavailability and also help in specific drug delivery. This review describes the application of nanotechnology in the control of human diseases with special emphasis on various eye and ocular surfaces diseases.

Pressure-dependent optical and vibrational properties of monolayer molybdenum disulfide.

Controlling the band gap by tuning the lattice structure through pressure engineering is a relatively new route for tailoring the optoelectronic properties of two-dimensional (2D) materials. Here, we investigate the electronic structure and lattice vibrational dynamics of the distorted monolayer 1T-MoS2 (1T') and the monolayer 2H-MoS2 via a diamond anvil cell (DAC) and density functional theory (DFT) calculations. The direct optical band gap of the monolayer 2H-MoS2 increases by 11.7% from 1.85 to 2.08 eV, which is the highest reported for a 2D transition metal dichalcogenide (TMD) material. DFT calculations reveal a subsequent decrease in the band gap with eventual metallization of the monolayer 2H-MoS2, an overall complex structure-property relation due to the rich band structure of MoS2. Remarkably, the metastable 1T'-MoS2 metallic state remains invariant with pressure, with the J2, A1g, and E2g modes becoming dominant at high pressures. This substantial reversible tunability of the electronic and vibrational properties of the MoS2 family can be extended to other 2D TMDs. These results present an important advance toward controlling the band structure and optoelectronic properties of monolayer MoS2 via pressure, which has vital implications for enhanced device applications.

Fungi as an efficient mycosystem for the synthesis of metal nanoparticles: progress and key aspects of research.

Nanotechnology is an emerging cutting-edge technology, which involves interdisciplinary subjects, such as physics, chemistry, biology, material science and medicine. Different methods for the synthesis of nanoparticles have been discussed here. Although physical and chemical methods have been successfully used to synthesize nanoparticles, the use of hazardous chemicals and synthesis at high temperature is a matter of concern. Hence, there is a necessity to develop eco-friendly techniques for the synthesis of nanoparticles. Biosynthesis of nanoparticles by fungi, bacteria, actinomycetes, lichen and viruses have been reported eco-friendly. Moreover, the fungal system has emerged as an efficient system for nanoparticle synthesis as fungi possess distinctive characters including high wall binding capacity, easy to culture and simpler biomass handling, etc. In this review, we have discussed fungi as an important tool for the fabrication of nanoparticles. In addition, methods and mechanism for synthesis of nanoparticles and its potential applications have also been discussed.

Emerging nanotechnology for detection of mycotoxins in food and feed.

The term mycotoxin was coined for toxic metabolites secreted by some fungi in food, food products and feed. The most prominent mycotoxins include aflatoxins (AFs), deoxynivalenol, zearalenone, ochratoxin, fumonisin and patulin. Among these some are proved to be strong carcinogenic agents such as AFs B1 while others are under suspicion to have carcinogenic effects. Ingestion of such mycotoxin-contaminated food and feed pose to a threat, mycotoxicoses. Various conventional techniques are available for the detection of mycotoxins, but unfortunately as a consequence of their constraint, the development of new and rapid techniques is the need of the hour. The use of nanotechnology for the development of nanobiosensors would be the alternative sensitive methods for the rapid detection of mycotoxins. Implementation of nanomaterials in the fabrication of nanobiosensors and their use for the detection of the mycotoxins in food and feed is the centre of interest of this review. We have inventoried nanomaterials applied for weaving nanobiosensors, which includes carbon nanotubes, nanowires, nanoparticles, quantum dots, nanorods and nanofibers. In addition, we have extensively reviewed available nanobiosensors specific for different mycotoxins, their advantages and challenges.

Green synthesis of copper nanoparticles by Citrus medica Linn. (Idilimbu) juice and its antimicrobial activity.

We report an eco-friendly method for the synthesis of copper nanoparticles (CuNPs) using Citron juice (Citrus medica Linn.), which is nontoxic and cheap. The biogenic copper nanoparticles were characterized by UV-Vis spectrophotometer showing a typical resonance (SPR) at about 631 nm which is specific for CuNPs. Nanoparticles tracking analysis by NanoSight-LM20 showed the particles in the range of 10-60 nm with the concentration of 2.18 × 10(8) particles per ml. X-ray diffraction revealed the FCC nature of nanoparticles with an average size of 20 nm. The antimicrobial activity of CuNPs was determined by Kirby-Bauer disk diffusion method against some selected species of bacteria and plant pathogenic fungi. It was reported that the synthesized CuNPs demonstrated a significant inhibitory activity against Escherichia coli followed by Klebsiella pneumoniae, Pseudomonas aeruginosa, Propionibacterium acnes and Salmonella typhi. Among the plant pathogenic fungi tested, Fusarium culmorum was found to be most sensitive followed by F. oxysporum and F. graminearum. The novelty of this work is that for the first time citron juice was used for the synthesis of CuNPs.

Bioactivity, mechanism of action, and cytotoxicity of copper-based nanoparticles: a review.

Nanotechnology is an emerging branch of science, which has potential to solve many problems in different fields. The union of nanotechnology with other fields of sciences including physics, chemistry, and biology has brought the concept of synthesis of nanoparticles from their respective metals. Till date, many types of nanoparticles have been synthesized and being used in different fields for various applications. Moreover, copper nanoparticles attract biologists because of their significant and broad-spectrum bioactivity. Due to the large surface area to volume ratio, copper nanoparticles have been used as potential antimicrobial agent in many biomedical applications. But the excess use of any metal nanoparticles increase the chance of toxicity to humans, other living beings, and environment. In this article, we have critically reviewed the bioactivities and cytotoxicity of copper nanoparticles. We have also focused on possible mechanism involved in its interaction with microbes.

Biogenic synthesis of metal nanoparticles from actinomycetes: biomedical applications and cytotoxicity.

Biogenic synthesis of metal nanoparticles has been well proved by using bacteria, fungi, algae, actinomycetes, plants, etc. Among the different microorganisms used for the synthesis of metal nanoparticles, actinomycetes are less known. Although, there are reports, which have shown that actinomycetes are efficient candidates for the production of metal nanoparticles both intracellularly and extracellularly. The nanoparticles synthesized by the members of actinomycetes present good polydispersity and stability and possess significant biocidal activities against various pathogens. The present review focuses on biological synthesis of metal nanoparticles and their application in medicine. In addition, the toxicity of these biogenic metal nanoparticles to human beings and environment has also been discussed.

Assessing the efficacy of carbon nanodots derived from curcumin on infectious diseases.

INTRODUCTION: The threat of new, emerging, and multidrug-resistant microbes is increasing which has created the necessity for new antimicrobials. In this regard, nanotechnology can be an alternative for the treatment of infectious microbes. Curcumin has been used since ancient times as antimicrobials; however, it has limitations due to its less aqueous solubility, bioavailability, and biocompatibility. This problem can be solved by curcumin-derived carbon nanodots, which are emerging antimicrobials of <10 nm size, water-soluble, biocompatible, less toxic, and fluorescent. AREAS COVERED: The review discusses the application of curcumin-derived carbon nanodots against various pathogenic microbes including bacteria and dreaded viruses like SARS-CoV-2. In addition, the role of curcumin carbon nanodots in biolabelling of pathogenic microbes, mechanism of action, bioimaging, and therapy has been critically examined. EXPERT OPINION: Carbon nanodots play an important role in combating pathogenic microbes by early diagnosis, bioimaging, nanocarrier for antimicrobial drugs, and therapy of infectious diseases. Curcumin carbon nanodots have already demonstrated their benefits of being water soluble, bioavailable, and biocompatible. However, more thorough research is needed to understand the efficacy and safety of curcumin carbon nanodots. In the future, curcumin-derived carbon nanodots can be used as alternative antimicrobial agents to fight microbial infections including multidrug-resistant microbes.