Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 79
Filtrar
1.
Saudi Pharm J ; 31(8): 101689, 2023 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-37457370

RESUMO

The antihyperglycemic effect of Plicosepalus acaciae (P. acaciae) extract was proven, but it still needs to be formulated into a suitable dosage form. We aimed at preparing an oral stabilized SLNs for P. acaciae with high payload, to be used as powder for reconstitution, filled into capsule or compressed into tablet. SLNs were prepared by emulsion solvent evaporation technique. Preliminary characterization was performed followed by full assessment of the optimized SLNs suspension and/or its lyophilized form: particle size, zeta potential, surface morphology, percentage entrapment efficiency (% EE), DSC, FTIR and in vitro release studies. The optimized SLNs lyophilized formula (F3L) exhibited acceptable compressibility and flowability. The reconstituted F3L showed % sedimentation volume of 91.83 %, re-dispersibility of 95%, viscosity of 764.33 cp, uniform particle size of 30.28 nm as shown by TEM, polydispersity index (PDI) of 0.16, zeta potential of -36.4 mV, % EE of 89.64 % and drug content of 97.69 %. The physical mixture and F3L FTIR spectrum indicated compatibility of components. In vitro release study showed a burst release in lyophilized formulations followed by slow-release, calculated as total phenolic content. Our previously reported work revealed that the total extracts of P. acaciae and SLNs formulations with the greatest lipid content F3s, demonstrated a considerable blood glucose-lowering effect in diabetic rats. The obtained lyophilized SLNs is promising for preparation of a suitable stable dosage form for P. acaciae extract to be used in treatment of diabetes.

2.
Saudi Pharm J ; 31(12): 101861, 2023 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-38028210

RESUMO

Nowadays novel bio-based materials have been widely employed in food and pharmaceutical industry because of their wide acceptability by the consumers rather than the synthetic materials nevertheless, they possess poor mechanical properties. Reinforcement of biopolymers with intercalation of mineral clays can improve their physicochemical properties; so that such biocomposites possess superior barrier and mechanical properties as well as stability and drug loading efficacy. Thus, this research aimed at formulating quercetin loaded bentonite-reinforced starch-gelatin based novel bioplastic with diverse applicability. The methodology of the study included Box Behnken optimization as well as physical, structural, mechanical and antimicrobial properties evaluation of the proposed reinforced bioplastics. Amount of starch, bentonite and glycerin were the independent variables while the tensile strength, swelling index and elongation percentage were studied as dependent variables. The optimized bioplastic film showed excellent physicochemical and morphological characteristics and also for efficient percentage drug content. The antimicrobial activity showed the highest activity against Escherichia coli followed by Pseudomonas aeruginosa and Staphylococcus aureus. Scanning electron microscopy (SEM) revealed the non-homogenous nature of the film. Generally, the results revealed that quercetin loaded bentonite-reinforced starch-gelatin based could be used as ecological friendly active food packaging as well as pharmaceutical application with significant antimicrobial properties.

3.
Int J Mol Sci ; 23(16)2022 Aug 21.
Artigo em Inglês | MEDLINE | ID: mdl-36012704

RESUMO

Ellagic acid has recently attracted increasing attention regarding its role in the prevention and treatment of cancer. Surface functionalized nanocarriers have been recently studied for enhancing cancer cells' penetration and achieving better tumor-targeted delivery of active ingredients. Therefore, the present work aimed at investigating the potential of APA-functionalized emulsomes (EGA-EML-APA) for enhancing cytototoxic activity of EGA against human breast cancer cells. Phospholipon® 90 G: cholesterol molar ratio (PC: CH; X1, mole/mole), Phospholipon® 90 G: Tristearin weight ratio (PC: TS; X2, w/w) and apamin molar concentration (APA conc.; X3, mM) were considered as independent variables, while vesicle size (VS, Y1, nm) and zeta potential (ZP, Y2, mV) were studied as responses. The optimized formulation with minimized vs. and maximized absolute ZP was predicted successfully utilizing a numerical technique. EGA-EML-APA exhibited a significant cytotoxic effect with an IC50 value of 5.472 ± 0.21 µg/mL compared to the obtained value from the free drug 9.09 ± 0.34 µg/mL. Cell cycle profile showed that the optimized formulation arrested MCF-7 cells at G2/M and S phases. In addition, it showed a significant apoptotic activity against MCF-7 cells by upregulating the expression of p53, bax and casp3 and downregulating bcl2. Furthermore, NF-κB activity was abolished while the expression of TNfα was increased confirming the significant apoptotic effect of EGA-EML-APA. In conclusion, apamin-functionalized emulsomes have been successfully proposed as a potential anti-breast cancer formulation.


Assuntos
Antineoplásicos , Neoplasias , Antineoplásicos/farmacologia , Apamina , Ácido Elágico/farmacologia , Excipientes , Humanos , Lipídeos , Células MCF-7 , Tamanho da Partícula
4.
AAPS PharmSciTech ; 22(5): 177, 2021 Jun 14.
Artigo em Inglês | MEDLINE | ID: mdl-34128106

RESUMO

Fluvastatin (FLV) is known to inhibit the 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA), which is over-expressed in various cancers. FLV has been reported to decrease cancer development and metastasis. However, because of low bioavailability, extensive first-pass metabolism and short half-life of FLV (1.2 h), it is not appropriate for clinical application. Therefore, FLV-loaded emulsomes were formulated and optimized using Box-Behnken experimental design to achieve higher efficiency of formulation. Antitumor activity of optimized FLV-loaded emulsomes was evaluated in prostate cancer cells using cell cytotoxicity, apoptotic activity, cell cycle analysis, and enzyme-linked immunosorbent assay. The FLV-loaded emulsomes exhibited a monodispersed size distribution with a mean particle size less than 100 nm as measured by zetasizer. The entrapment efficiency was found to be 93.74% with controlled drug release profile. FLV-EMLs showed a significant inhibitory effect on the viability of PC3 cells when compared to the free FLV (P < 0.0025). Furthermore, FLV-EMLs showed significant arrest in G2/M and increase in percentage of apoptotic cells as compared to free FLV. FLV-EMLs were more effective than free FLV in reducing mitochondrial membrane potential and increase in caspase-3 activity. These results suggesting that FLV-EMLs caused cell cycle arrest which clarifies its significant antiproliferative effect compared to the free drug. Therefore, optimized FLV-EMLs may be an effective carrier for FLV in prostate cancer treatment.


Assuntos
Antineoplásicos/farmacologia , Apoptose/efeitos dos fármacos , Citotoxinas/farmacologia , Portadores de Fármacos/farmacologia , Fluvastatina/farmacologia , Neoplasias da Próstata , Antineoplásicos/síntese química , Apoptose/fisiologia , Sobrevivência Celular/efeitos dos fármacos , Sobrevivência Celular/fisiologia , Citotoxinas/síntese química , Preparações de Ação Retardada/síntese química , Preparações de Ação Retardada/farmacologia , Portadores de Fármacos/síntese química , Fluvastatina/síntese química , Humanos , Masculino , Células PC-3 , Tamanho da Partícula
5.
AAPS PharmSciTech ; 20(7): 255, 2019 Jul 18.
Artigo em Inglês | MEDLINE | ID: mdl-31321570

RESUMO

The main principles of green chemistry and engineering were extended to pharmaceutical formulations to prepare eco-friendly surfactant-free dry emulsion tablets (SFDETs) devoid of solvents or synthetic surfactants. Surfactant-free emulsions were stabilized by in situ cyclodextrins/sweet almond oil inclusion complexes and assessed for creaming stability. Formulation variables' effects on the emulsion droplet size and tadalafil solubility were studied using 22 × 3 factorial design. The emulsions exhibited nanometric and micrometric droplet sizes. The optimized nanoemulsion was loaded with tadalafil, morphologically evaluated, and utilized for preparing lyophilized SFDETs using different gelatin/Pearlitol® ratios. The tablets were characterized and the selected formulation was subjected to storage for 6 months. The emulsions prepared using ß-cyclodextrin or higher concentrations of α-cyclodextrin showed little or no phase separation. Statistical analysis revealed significant influence of cyclodextrin type and amount on droplet size, while cyclodextrin type and oil volume exhibited significant effect on drug solubility. Morphological examination revealed non-aggregated spherical emulsion droplets. The prepared tablets showed satisfactory mechanical strength, short disintegration times, and enhanced drug dissolution. The selected tablet formulation (gelatin/Pearlitol®, 4:2 w/w) showed acceptable stability at 25°C/60% relative humidity. An overall conclusion claims that the absence of surfactants is expected to minimize the proposed tablets' in vivo toxicity and environmental concerns.


Assuntos
Ciclodextrinas/química , Emulsões/química , Tensoativos/química , Comprimidos , Tadalafila/química , Dessecação , Liberação Controlada de Fármacos , Liofilização , Umidade , Solventes
7.
Pharm Dev Technol ; 20(8): 919-926, 2015 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-25019166

RESUMO

OBJECTIVE: Detailed optimization process was carried out to enhance permeation parameters, and hence bioavailability, of simvastatin (SMV) transdermal films. METHODS: SMV solubility was investigated in various oils, surfactants and co-surfactants/co-solvents. Mixtures of the selected components were prepared to identify zone of nanoemulsion formation that was utilized in Extreme Vertices mixture design to develop SMV self-nanoemulsifying drug delivery systems (SNEDDS) with minimum globule size. Optimized SMV-SNEDDS were included in the preparation of transdermal films. A fractional factorial design was implemented to evaluate effects of the factors on the amount of SMV permeated. The optimized film was investigated for ex vivo skin permeation and in vivo pharmacokinetic parameters. RESULTS: The optimum SNEDDS formula was 0.09, 0.8 and 0.11 for Sefsol 218, tween 80 and PEG 200, respectively. Fractional factorial design depicted the optimized SMV transdermal film with 2% HPMC and 2% DMSO as permeation enhancer that showed 1.82-fold improvements in skin flux. The pharmacokinetic data showed higher Cmax and almost doubled AUC compared with raw SMV-loaded films. CONCLUSION: The two-step optimization implemented to optimize and control the experimental conditions for the preparation of SMV-SNEDDS-transdermal film with improved ex vivo skin permeation and enhanced in vivo parameters.

8.
Pharm Dev Technol ; 19(5): 521-30, 2014 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-23713715

RESUMO

Orally dissolving films (dissofilms) have gained increasing popularity and attention due to their ease of administration and avoidance of first pass metabolism. Ketotifen fumarate (KF) bioavailability is reported to be only ~ 50% due to hepatic first-pass metabolism. Aiming to surmount this drawback and improve patients' compliance, a 3(2) full factorial design was applied to formulate KF Orodispersible films, and to investigate the effects and interactions of the concentrations of the novel film former; Lycoat NG73® and the film modifier; maltodextrin (MDX) on the characteristics of the films prepared using solvent casting technique. The dissofilms were thoroughly evaluated regarding their weight uniformity, content uniformity, moisture uptake, in vivo mouth dissolving time (MDT) and their thermal behavior via differential scanning calorimetry. Statistical analysis revealed the significant influence of Lycoat NG73® concentration on percent elongation, percent KF dissolved after 5 min, and in vivo MDT, while MDX concentration had significant effect only on percent elongation. Further, storage of the optimal selected formula (15% Lycoat NG73 and 0% MDX) at 40 °C/75% relative humidity for 12 weeks caused no significant change in appearance, KF content or drug dissolution profile. Pharmacokinetic study revealed that the orally dissolving films showed significantly higher absorption extent than the reference marketed product, while no significant difference was observed for Cmax.


Assuntos
Antialérgicos/administração & dosagem , Cetotifeno/administração & dosagem , Veículos Farmacêuticos/química , Administração Oral , Adulto , Animais , Antialérgicos/química , Antialérgicos/farmacocinética , Humanos , Cetotifeno/química , Cetotifeno/farmacocinética , Masculino , Polissacarídeos/química , Ratos , Ratos Sprague-Dawley , Solubilidade , Adulto Jovem
9.
Pharmaceutics ; 16(6)2024 May 27.
Artigo em Inglês | MEDLINE | ID: mdl-38931961

RESUMO

The Pharmaceutics Editorial Office retracts the article, "Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer" [...].

10.
Front Pharmacol ; 15: 1397639, 2024.
Artigo em Inglês | MEDLINE | ID: mdl-38895619

RESUMO

Breast cancer is among the most prevalent tumors worldwide. In this study, in-situ forming implants (ISFIs) containing rosuvastatin calcium were prepared using three types of poly (D, L-lactic-co-glycolic acid) (PLGA), namely, PLGA 50/50 with ester terminal and PLGA 75/25 with ester or acid terminal. Additionally, polydimethylsiloxane (PDMS) was added in concentrations of 0, 10, 20, and 30% w/v to accelerate matrix formation. The prepared ISFIs were characterized for their rheological behaviors, rate of matrix formation, and in-vitro drug release. All the prepared formulations revealed a Newtonian flow with a matrix formation rate between 0.017 and 0.059 mm/min. Generally, increasing the concentration of PDMS increased the matrix formation rate. The prepared implants' release efficiency values ranged between 46.39 and 89.75%. The ISFI containing PLGA 50/50 with 30% PDMS was selected for further testing, as it has the highest matrix formation rate and a promising release efficiency value. Copper-selenium nanoparticles were prepared with two different particle sizes (560 and 383 nm for CS1 and CS2, respectively) and loaded into the selected formulation to enhance its anticancer activity. The unloaded and loaded implants with rosuvastatin and copper-selenium nanoparticles were evaluated for their antibacterial activity, against Gram-positive and negative microorganisms, and anticancer efficacy, against MCF-7 and MDA-MB-231 cell lines. The results confirmed the potency of rosuvastatin calcium against cancer cells and the synergistic effect when loaded with smaller particle sizes of copper-selenium nanoparticles. This formulation holds a considerable potential for efficient breast cancer therapy.

11.
Pharmaceutics ; 16(2)2024 Jan 30.
Artigo em Inglês | MEDLINE | ID: mdl-38399356

RESUMO

The journal retracts the article "Lipidic Nano-Sized Emulsomes Potentiates the Cytotoxic and Apoptotic Effects of Raloxifene Hydrochloride in MCF-7 Human Breast Cancer Cells: Factorial Analysis and In Vitro Anti-Tumor Activity Assessment" [...].

12.
Pharmaceutics ; 16(2)2024 Jan 23.
Artigo em Inglês | MEDLINE | ID: mdl-38399350

RESUMO

The journal retracts the article, "Thymoquinone-Loaded Soy-Phospholipid-Based Phytosomes Exhibit Anticancer Potential against Human Lung Cancer Cells" [...].

13.
Pharmaceutics ; 16(2)2024 Jan 29.
Artigo em Inglês | MEDLINE | ID: mdl-38399352

RESUMO

This journal retracts the article "Intranasal Niosomal In Situ Gel as a Promising Approach for Enhancing Flibanserin Bioavailability and Brain Delivery: In Vitro Optimization and Ex Vivo/In Vivo Evaluation" [...].

14.
19.
Drug Deliv ; 30(1): 2174209, 2023 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-36762548

RESUMO

Andrographolide (AG), a major active constituent of Andrographis paniculata, is known to hinder proliferation of several types of cancer cells. However, its poor solubility and cellular permeability restrict its use in clinical applications. In this study, AG-loaded phytosomes (AG-PTMs) were formulated and optimized with respect to particle size using l-α-phosphatidylcholine (PC):AG ratio and sonication time (ST) as independent variables. The optimized formula was prepared at 1:2.7 for AG:PC molar ratio and 4.9 min for ST and exhibited a particle size of 243.7 ± 7.3 nm, polydispersity index (PDI) of 0.310 and entrapment efficiency of 72.20 ± 4.53. Also, the prepared formula showed a slow release of AG over 24-h period. The antiproliferative activity of AG-PTMs was investigated against the liver cancer cell line HepG2. AG-PTMs significantly repressed the growth of HepG2 cells with an IC50 value of 4.02 ± 0.14 µM. AG uptake by HepG2 cells was significantly enhanced in incubations containing the optimized formula. AG-PTMs also caused G2-M cell cycle phase arrest and increased the fraction of apoptotic cells in pre-G1 phase. These effects were associated with induction of oxidative stress and mitochondrial dysfunction. In addition, AG-PTMs significantly upregulated mRNA expression of BAX and downregulated that of BCL2. Furthermore, AG-PTMs significantly enhanced the concentration of caspase-3 in comparison to raw AG. These data indicate that the phytosomal delivery of AG significantly inhibited HepG2 cell proliferation through enhanced cellular uptake, arresting cell cycle at the G2-M phase and inducing mitochondrial-dependent apoptosis.


Assuntos
Diterpenos , Neoplasias Hepáticas , Humanos , Células Hep G2 , Proliferação de Células , Diterpenos/farmacologia , Apoptose , Pontos de Checagem da Fase G2 do Ciclo Celular , Neoplasias Hepáticas/tratamento farmacológico
20.
Biomed Pharmacother ; 168: 115757, 2023 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-37897972

RESUMO

Costunolide (COST) is a sesquiterpene lactone that belongs to the germacranolide group, and occurs mainly in Saussurea lappa Clarke. Although COST inhibits the proliferation and metastasis of cancer cells and induces their apoptosis, it suffers poor water solubility and cellular permeability. Therefore, this study aimed to enhance the anti-proliferative activity of COST in LS174T colon cancer cells through its inclusion in bilosomal nanoformulation (COST-BILs). The optimized BIL formula contained cholesterol and Span-85 in a molar ratio of 1:5 as well as bile salt at a molar concentration of 0.5 mM, with entrapment efficiency of 63.4 ± 3.59 % and particle size of 119.7 ± 3.63 nm. The optimized COST-BILs showed a potent cytotoxic effect against LS174T cells with an IC50 of 6.20 µM; meanwhile, raw COST had an IC50 of 15.78 µM. Safety and relative selectivity were confirmed in the normal human colonic epithelial cells (HCoEpC). Cell cycle analysis indicated that both raw COST and COST-BILs significantly increased the fraction of LS174T cells in the sub-G1 phase. This was accompanied by a significant enhancement of early, late, and total apoptosis, as indicated by annexin-V staining. In addition, COST-BILs exhibited more potent activity in up-regulating CASP3, TP53, and BAX, and in down-regulating the expression of BCL2 mRNA as compared to raw COST. Further, the prepared formula enhanced the release of cytochrome C as well as the generation of reactive oxygen species (ROS) and reduced the integrity of mitochondrial membranes. In conclusion, the loading of COST on BILs significantly enhances its pro-apoptotic activity in LS174T cells.


Assuntos
Antineoplásicos , Neoplasias do Colo , Nanopartículas , Sesquiterpenos , Humanos , Antineoplásicos/farmacologia , Sesquiterpenos/farmacologia , Apoptose , Neoplasias do Colo/tratamento farmacológico , Proliferação de Células
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA