LAVA: an open-source approach to designing LAMP (loop-mediated isothermal amplification) DNA signatures.

BACKGROUND: We developed an extendable open-source Loop-mediated isothermal AMPlification (LAMP) signature design program called LAVA (LAMP Assay Versatile Analysis). LAVA was created in response to limitations of existing LAMP signature programs. RESULTS: LAVA identifies combinations of six primer regions for basic LAMP signatures, or combinations of eight primer regions for LAMP signatures with loop primers, which can be used as LAMP signatures. The identified primers are conserved among target organism sequences. Primer combinations are optimized based on lengths, melting temperatures, and spacing among primer sites. We compare LAMP signature candidates for Staphylococcus aureus created both by LAVA and by PrimerExplorer. We also include signatures from a sample run targeting all strains of Mycobacterium tuberculosis. CONCLUSIONS: We have designed and demonstrated new software for identifying signature candidates appropriate for LAMP assays. The software is available for download at http://lava-dna.googlecode.com/.

Diagnostic evaluation of multiplexed reverse transcription-PCR microsphere array assay for detection of foot-and-mouth and look-alike disease viruses.

A high-throughput multiplexed assay was developed for the differential laboratory detection of foot-and-mouth disease virus (FMDV) from viruses that cause clinically similar diseases of livestock. This assay simultaneously screens for five RNA and two DNA viruses by using multiplexed reverse transcription-PCR (mRT-PCR) amplification coupled with a microsphere hybridization array and flow-cytometric detection. Two of the 17 primer-probe sets included in this multiplex assay were adopted from previously characterized real-time RT-PCR (rRT-PCR) assays for FMDV. The diagnostic accuracy of the mRT-PCR assay was evaluated using 287 field samples, including 247 samples (213 true-positive samples and 35 true-negative samples) from suspected cases of foot-and-mouth disease collected from 65 countries between 1965 and 2006 and 39 true-negative samples collected from healthy animals. The mRT-PCR assay results were compared to those of two singleplex rRT-PCR assays, using virus isolation with antigen enzyme-linked immunosorbent assays as the reference method. The diagnostic sensitivity of the mRT-PCR assay for FMDV was 93.9% (95% confidence interval [CI], 89.8 to 96.4%), and the sensitivity was 98.1% (95% CI, 95.3 to 99.3%) for the two singleplex rRT-PCR assays used in combination. In addition, the assay could reliably differentiate between FMDV and other vesicular viruses, such as swine vesicular disease virus and vesicular exanthema of swine virus. Interestingly, the mRT-PCR detected parapoxvirus (n = 2) and bovine viral diarrhea virus (n = 2) in clinical samples, demonstrating the screening potential of this mRT-PCR assay to identify viruses in FMDV-negative material not previously recognized by using focused single-target rRT-PCR assays.

Development and initial results of a low cost, disposable, point-of-care testing device for pathogen detection.

Development of small footprint, disposable, fast, and inexpensive devices for pathogen detection in the field and clinic would benefit human and veterinary medicine by allowing evidence-based responses to future out breaks. We designed and tested an integrated nucleic acid extraction and amplification device employing a loop-mediated isothermal amplification (LAMP) or reverse transcriptase-LAMP assay. Our system provides a screening tool with polymerase-chain-reaction-level sensitivity and specificity for outbreak detection, response, and recovery. Time to result is ∼90 min. The device utilizes a swab that collects sample and then transfers it to a disc of cellulose-based nucleic acid binding paper. The disc is positioned within a disposable containment tube with a manual loading port. In order to test for the presence of target pathogens, LAMP reagents are loaded through the tube's port into contact with the sample containing cellulose disc. The reagents then are isothermally heated to 63°C for ∼1 h to achieve sequence-specific target nucleic acid amplification. Due to the presence of a colorimetric dye, amplification induces visible color change in the reagents from purple to blue. As initial demonstrations, we detected methicillin resistant Staphylococcus aureus genomic DNA, as well as recombinant and live foot-and-mouth disease virus.

Aptamer-based SERRS sensor for thrombin detection.

We describe an aptamer-based surface enhanced resonance Raman scattering (SERRS) sensor with high sensitivity, specificity, and stability for the detection of a coagulation protein, human alpha-thrombin. The sensor achieves high sensitivity and a limit of detection of 100 pM by monitoring the SERRS signal change upon the single-step of thrombin binding to immobilized thrombin binding aptamer. The selectivity of the sensor is demonstrated by the specific discrimination of thrombin from other protein analytes. The specific recognition and binding of thrombin by the thrombin binding aptamer is essential to the mechanism of the aptamer-based sensor, as shown through measurements using negative control oligonucleotides. In addition, the sensor can detect 1 nM thrombin in the presence of complex biofluids, such as 10% fetal calf serum, demonstrating that the immobilized, 5'-capped, 3'-capped aptamer is sufficiently robust for clinical diagnostic applications. Furthermore, the proposed sensor may be implemented for multiplexed detection using different aptamer-Raman probe complexes.

Single-step electronic detection of femtomolar DNA by target-induced strand displacement in an electrode-bound duplex.

We report a signal-on, electronic DNA (E-DNA) sensor that is label-free and achieves a subpicomolar detection limit. The sensor, which is based on a target-induced strand displacement mechanism, is composed of a "capture probe" attached by its 5' terminus to a gold electrode and a 5' methylene blue-modified "signaling probe" that is complementary at both its 3' and 5' termini to the capture probe. In the absence of target, hybridization between the capture and signaling probes minimizes contact between the methylene blue and electrode surface, limiting the observed redox current. Target hybridization displaces the 5' end of the signaling probe, generating a short, flexible single-stranded DNA element and producing up to a 7-fold increase in redox current. The observed signal gain is sufficient to achieve a demonstrated (not extrapolated) detection limit of 400 fM, which is among the best reported for single-step electronic DNA detection. Moreover, because sensor fabrication is straightforward, the approach appears to provide a ready alternative to the more cumbersome femtomolar electrochemical assays described to date.

Sequence-specific, electronic detection of oligonucleotides in blood, soil, and foodstuffs with the reagentless, reusable E-DNA sensor.

The ability to detect specific oligonucleotides in complex, contaminant-ridden samples, without the use of exogenous reagents and using a reusable, fully electronic platform could revolutionize the detection of pathogens in the clinic and in the field. Here, we characterize a label-free, electronic sensor, termed E-DNA, for its ability to simultaneously meet these challenging demands. We find that because signal generation is coupled to a hybridization-linked conformational change, rather than to only adsorption to the sensor surface, E-DNA is selective enough to detect oligonucleotides in complex, multicomponent samples, such as blood serum and soil. Moreover, E-DNA signaling is monotonically related to target complementarity, allowing the sensor to discriminate between mismatched targets: we readily detect the complementary 17-base target against a 50 000-fold excess of genomic DNA, can distinguish a three-base mismatch from perfect target directly in blood serum, and under ideal conditions, observe statistically significant differences between single-base mismatches. Finally, because the sensing components are linked to the electrode surface, E-DNA is reusable: a 30-s room temperature wash recovers >99% of the sensor signal. This work further supports the utility of E-DNA as a rapid, specific, and convenient method for the detection of DNA and RNA sequences.

An electronic, aptamer-based small-molecule sensor for the rapid, label-free detection of cocaine in adulterated samples and biological fluids.

Whereas spectroscopic and chromatographic techniques for the detection of small organic molecules have achieved impressive results, these methods are generally slow and cumbersome, and thus the development of a general means for the real-time, electronic detection of such targets remains a compelling goal. Here we demonstrate a potentially general, label-free electronic method for the detection of small-molecule targets by building a rapid, reagentless biosensor for the detection of cocaine. The sensor, based on the electrochemical interrogation of a structure-switching aptamer, specifically detects micromolar cocaine in seconds. Because signal generation is based on binding-induced folding, the sensor is highly selective and works directly in blood serum and in the presence of commonly employed interferents and cutting agents, and because all of the sensor components are covalently attached to the electrode surface, the sensor is also reusable: we achieve >99% signal regeneration upon a brief, room temperature aqueous wash. Given recent advances in the generation of highly specific aptamers, this detection platform may be readily adapted for the detection of other small molecules of a wide range of clinically and environmentally relevant small molecules.

G-factor analysis of protein secondary structure in solutions and thin films.

The biological activity of proteins is structure dependent. In this discussion, we describe development of g-factor analysis for characterizing the secondary structure of proteins in solutions and films. In g-factor analysis, experimental circular dichroism (CD) and UV absorbance spectra are converted to dimensionless g-factor spectra by dividing the differential absorbance of circularly polarized light (AL - AR) by the UV absorbance (A) at each wavelength. The spectra can be deconvolved and the secondary structure estimated without information on the protein molecular weight, sample concentration, or sample path length. We have refined g-factor spectral acquisition and deconvolution parameters to improve the precision and accuracy of experimental g-factor spectra and the subsequent secondary structure estimations. In general, slower scan rates and longer response times are required to obtain high quality g-factor spectra than to obtain ordinary CD spectra, particularly for data at wavelengths longer than 230 nm. The spectral acquisition and deconvolution procedures have been validated for aqueous bovine serum albumin (BSA) and poly(L-proline). The secondary structures of fibronectin and laminin in buffer solutions are predicted. When BSA and poly(L-proline) form films on quartz, their secondary structures change significantly: 13% for BSA and 32% for poly(L-proline). By contrast, the secondary structure of fibronectin is the same in solution and films. The g-factor method is an easy, rapid, accurate and precise method for determining secondary structure and structural changes in protein solutions and films. Potential applications range from proteomics and structure-based drug discovery, to the design and fabrication of biosensors, biomaterials and biofluidic devices.