Direct growth of crystalline SiGe nanowires on superconducting NbTiN thin films.

Novel heterostructures created by coupling one-dimensional semiconductor nanowires with a superconducting thin film show great potential toward next-generation quantum computing. Here, by growing high-crystalline SiGe nanowires on a NbTiN thin film, the resulting heterostructure exhibits Ohmic characteristics as well as a shift of the superconducting transition temperature (Tc). The structure was characterized at atomic resolution showing a sharp SiGe/NbTiN interface without atomic interdiffusion. Lattice spacing, as calculated from large-area x-ray diffraction experiments, suggests a potential preferredd-spacing matching between (200) NbTiN and (110) SiGe grains. The observed out-of-plane compressive strain within the NbTiN films coupled with SiGe nanowires explains the downward shift of the superconductivity behavior. The presented results post scientific insights toward functional heterostructures by coupling multi-dimensional materials, which could enable tunable superconductivity that benefits the quantum science applications.

Towards performing high-resolution inelastic X-ray scattering measurements at hard X-ray free-electron lasers coupled with energetic laser drivers.

High-resolution inelastic X-ray scattering is an established technique in the synchrotron community, used to investigate collective low-frequency responses of materials. When fielded at hard X-ray free-electron lasers (XFELs) and combined with high-intensity laser drivers, it becomes a promising technique for investigating matter at high temperatures and high pressures. This technique gives access to important thermodynamic properties of matter at extreme conditions, such as temperature, material sound speed, and viscosity. The successful realization of this method requires the acquisition of many identical laser-pump/X-ray-probe shots, allowing the collection of a sufficient number of photons necessary to perform quantitative analyses. Here, a 2.5-fold improvement in the energy resolution of the instrument relative to previous works at the Matter in Extreme Conditions (MEC) endstation, Linac Coherent Light Source (LCLS), and the High Energy Density (HED) instrument, European XFEL, is presented. Some aspects of the experimental design that are essential for improving the number of photons detected in each X-ray shot, making such measurements feasible, are discussed. A careful choice of the energy resolution, the X-ray beam mode provided by the XFEL, and the position of the analysers used in such experiments can provide a more than ten-fold improvement in the photometrics. The discussion is supported by experimental data on 10 µm-thick iron and 50 nm-thick gold samples collected at the MEC endstation at the LCLS, and by complementary ray-tracing simulations coupled with thermal diffuse scattering calculations.

Combining Laue diffraction with Bragg coherent diffraction imaging at 34-ID-C.

Measurement modalities in Bragg coherent diffraction imaging (BCDI) rely on finding a signal from a single nanoscale crystal object which satisfies the Bragg condition among a large number of arbitrarily oriented nanocrystals. However, even when the signal from a single Bragg reflection with (hkl) Miller indices is found, the crystallographic axes on the retrieved three-dimensional (3D) image of the crystal remain unknown, and thus localizing in reciprocal space other Bragg reflections becomes time-consuming or requires good knowledge of the orientation of the crystal. Here, the commissioning of a movable double-bounce Si (111) monochromator at the 34-ID-C endstation of the Advanced Photon Source is reported, which aims at delivering multi-reflection BCDI as a standard tool in a single beamline instrument. The new instrument enables, through rapid switching from monochromatic to broadband (pink) beam, the use of Laue diffraction to determine crystal orientation. With a proper orientation matrix determined for the lattice, one can measure coherent diffraction patterns near multiple Bragg peaks, thus providing sufficient information to image the full strain tensor in 3D. The design, concept of operation, the developed procedures for indexing Laue patterns, and automated measuring of Bragg coherent diffraction data from multiple reflections of the same nanocrystal are discussed.

Current and Future Considerations in the Use of Mechanical Circulatory Support Devices: An Update, 2008-2018.

Our review in the 2008 volume of this journal detailed the use of mechanical circulatory support (MCS) for treatment of heart failure (HF). MCS initially utilized bladder-based blood pumps generating pulsatile flow; these pulsatile flow pumps have been supplanted by rotary blood pumps, in which cardiac support is generated via the high-speed rotation of computationally designed blading. Different rotary pump designs have been evaluated for their safety, performance, and efficacy in clinical trials both in the United States and internationally. The reduced size of the rotary pump designs has prompted research and development toward the design of MCS suitable for infants and children. The past decade has witnessed efforts focused on tissue engineering-based therapies for the treatment of HF. This review explores the current state and future opportunities of cardiac support therapies within our larger understanding of the treatment options for HF.

Impact of Socioeconomic Factors on Patient Desire for Early LVAD Therapy Prior to Inotrope Dependence.

BACKGROUND: Worsening heart failure (HF) and health-related quality of life (HRQOL) have been shown to impact the decision to proceed with left ventricular assist device (LVAD) implantation, but little is known about how socioeconomic factors influence expressed patient preference for LVAD. METHODS AND RESULTS: Ambulatory patients with advanced systolic HF (n=353) reviewed written information about LVAD therapy and completed a brief survey to indicate whether they would want an LVAD to treat their current level of HF. Ordinal logistic regression analyses identified clinical and demographic predictors of LVAD preference. Higher New York Heart Association (NYHA) class, worse HRQOL measured by Kansas City Cardiomyopathy Questionnaire, lower education level, and lower income were significant univariable predictors of patients wanting an LVAD. In the multivariable model, higher NYHA class (OR [odds ratio]: 1.43, CI [confidence interval]: 1.08-1.90, P = .013) and lower income level (OR: 2.10, CI: 1.18 - 3.76, P = .012 for <$40,000 vs >$80,000) remained significantly associated with wanting an LVAD. CONCLUSION: Among ambulatory patients with advanced systolic HF, treatment preference for LVAD was influenced by level of income independent of HF severity. Understanding the impact of socioeconomic factors on willingness to consider LVAD therapy may help tailor counseling towards individual needs.

Characterization of soft tissue tumours with ultrasound, shear wave elastography and MRI.

OBJECTIVE: To predict accurately whether a soft tissue mass was benign or malignant and to characterize its type using ultrasound, shear wave elastography and MRI. We hypothesized that with the addition of shear wave elastography, it would be possible to determine a threshold velocity value to classify a lesion as benign or malignant. MATERIALS AND METHODS: A total of 151 consecutive, consenting adult patients were prospectively recruited to this study in a tertiary referral musculoskeletal oncology centre. All lesions were assessed with ultrasound, including B mode, Doppler and shear wave elastography measurements. One hundred thirty-eight patients also underwent MRI of the lesion. A histological diagnosis was obtained for all lesions. RESULTS: Malignant lesions were larger than benign lesions and had a greater Doppler activity. There was no useful threshold shear wave velocity to differentiate between benign and malignant lesions. Longitudinal and transverse shear wave velocities were strongly positively correlated with each other. An inverse correlation was shown with lesion size and depth, regardless of whether it was benign or malignant. A logistic regression model combining the ultrasound and MRI characteristics did not confidently classify a lesion as benign or malignant and was inferior to expert opinion. CONCLUSION: The strongest predictors of malignancy are large lesion size and high vascularity. The combination of all ultrasound characteristics (including shear wave elastography) and MRI features does not confidently classify a lesion as benign or malignant, and histological diagnosis remains the gold standard.

'Desculturización,' urbanization, and nutrition transition among urban Kichwas Indigenous communities residing in the Andes highlands of Ecuador.

BACKGROUND: The nutrition transition continues to affect populations throughout the world. The added impact of market integration and urbanization exacerbates the impact of the nutrition transition upon Indigenous populations worldwide. OBJECTIVES: This study aims to explore the nutritional concerns of the urban Kichwas community residing in the Andes highlands of Ecuador. STUDY DESIGN: This is a qualitative study. METHODS: Eight focus groups were conducted with Kichwas men and women in November 2015 in the Imbabura province of the Andes in Ecuador. DATA ANALYSIS: Applied thematic analysis was used to analyze findings regarding nutrition. RESULTS: The participants shared concerns regarding increased intake of fast food, poor meal timing, and a shift in the child's food preferences that rejects traditional foods. They attributed these concerns to urbanization resulting from an increase in dual-income households and a loss of cultural identity. CONCLUSIONS: Synergistic cultural factors are related to nutritional concerns voiced by the urban Kichwas community. PUBLIC HEALTH IMPLICATIONS: Syndemic theory is a useful interpretive lens regarding nutritional trends within the Kichwas communities as they relate to the increased risk of chronic disease.

Risk and resiliency: the syndemic nature of HIV/AIDS in the indigenous highland communities of Ecuador.

OBJECTIVES: This community-based study explores the syndemic nature of HIV/AIDS risk and resilience among Indigenous Kichwa communities in the province of Imbabura, Ecuador. This study elucidates individual and community-level factors that serve to exacerbate HIV/AIDS risk, as they relate to underlying macrolevel, structural forces. Critically, this study also elicited opportunities for community-based opportunities for resiliency from HIV/AIDS. STUDY DESIGN: Exploratory qualitative study. METHODS: Guided by syndemic theory, a qualitative study was conducted to explore HIV risk and resilience among Indigenous Kichwa communities in the Northern Andean highlands of Ecuador. Eight focus groups (n = 59) with men and women from two communities were conducted. The data were analyzed using applied thematic analysis techniques. RESULTS: Identified risk factors for HIV/AIDS centered around the following themes: (1) parents leaving the community for work, (2) alcohol and drug consumption, (3) unprotected sex, and (4) barriers to health care. Identified HIV/AIDS resiliency factors included the preservation of Indigenous culture and family-focused interventions. CONCLUSIONS: The identified risk factors for HIV/AIDS are interrelated within a complex syndemic relationship. The mutually reinforcing individual-level risk factors of substance abuse and risky sexual behavior coalesce with violence to exacerbate the risk for HIV/AIDS acquisition among Ecuadorian Highland Indigenous communities. Moreover, HIV/AIDS risk prevails in the macrolevel context of disproportionate unemployment among Indigenous peoples and a systematically fragmented healthcare system. It is critical that public health professionals work to revolutionize the systematic discrimination that underpins indigenous health disparities at-large.

Knee thrust prevalence and normative hip-knee-ankle angle deviation values among healthy individuals across the lifespan.

OBJECTIVE: To report the prevalence of varus thrust and normative values for hip-knee-ankle (HKA) angle deviation across the lifespan, and to explore associations between HKA angle deviation and selected clinical factors. DESIGN: This was a cross-sectional observational study of 572 participants from the 1000 Norms Project, aged 3-101 years and who self-reported as being healthy. Video recordings (2D) of frontal plane gait were reviewed by physiotherapists for presence of knee thrust and quantification of HKA angle deviation (the difference between HKA angle at initial contact and mid-stance). Age and sex-stratified normative HKA angle deviation values were presented as means and 95% confidence intervals (CIs). Correlations were calculated between HKA angle and clinical measures (age, sex, body mass index (BMI), alignment, knee and hip strength, Knee Injury and Osteoarthritis Outcomes Scores (KOOS), foot posture index, temporo-spatial gait, and hypermobility). RESULTS: Overall, 31% of the cohort had varus thrust, most prevalent among adults older than 60 years (42%) and children aged 3-9 (41%). Varus thrust was common in adolescents (25%) and adults aged 20-59 (23%). Mean HKA angle deviation for the entire cohort was 1.2° (95%CI: 1.07, 1.36) towards varus, and 2.1° (95%CI: 1.84, 2.36) among people with clinical varus thrust. Weak associations were identified between HKA angle deviation and BMI, stride width, and KOOS-Sports among adolescents, and in adults weakly associated with height. CONCLUSIONS: Prevalence of varus thrust is common across the lifespan. Normative values established here can be readily used by clinicians and researchers in monitoring this gait deviation.

Self-reported knee pain and disability among healthy individuals: reference data and factors associated with the Knee injury and Osteoarthritis Outcome Score (KOOS) and KOOS-Child.

OBJECTIVE: To develop normative reference data for the Knee injury and Osteoarthritis Outcome Score (KOOS) and KOOS-Child, as well as investigate socio-demographic, psychological and physical factors associated with knee pain and disability among healthy adults. METHOD: The KOOS or KOOS-Child (each containing five subscales) was administered to participants aged 8-101 years within the 1000 Norms Project, an observational study of 1000 self-reported healthy individuals. Self-efficacy, physical activity, body mass index (BMI), lower limb alignment, knee frontal plane projection angle (FPPA), knee range of motion (ROM), knee and hip strength, six-minute walk, 30-second chair stand and timed up and down stairs tests were collected. KOOS data were dichotomised using established cut-off scores and logistic regression analyses were conducted for each subscale. RESULTS: Socio-demographic characteristics were similar to the Australian population. Normative reference data were generated for children (8-17 years) and adults (18-101 years). Female adults were up to twice as likely to report knee pain, symptoms and sport/recreation (Sport/Rec) limitations compared to males (P < .05). Older age, lower self-efficacy, greater BMI, varus lower limb alignment, lower knee flexion ROM and lower hip external rotation (ER) strength were independently associated with knee pain and disability among adults. CONCLUSIONS: Age- and gender-stratified reference data for the KOOS and KOOS-Child have been developed to guide interpretation of results in practice and research for individuals with knee disorders. Psychological and physical factors are linked with self-reported knee pain/disability among adults, and longitudinal studies to investigate causation are required.

Advancing the Science of Myocardial Recovery With Mechanical Circulatory Support: A Working Group of the National, Heart, Lung and Blood Institute.

The medical burden of heart failure (HF) has spurred interest in clinicians and scientists to develop therapies to restore the function of a failing heart. To advance this agenda, the National Heart, Lung, and Blood Institute (NHLBI) convened a Working Group of experts on June 2-3, 2016, in Bethesda, Maryland, to develop recommendations for the NHLBI aimed at advancing the science of cardiac recovery in the setting of mechanical circulatory support (MCS). MSC devices effectively reduce volume and pressure overload that drives the cycle of progressive myocardial dysfunction, thereby triggering structural and functional reverse remodeling. Research in this field could be innovative in many ways, and the Working Group specifically discussed opportunities associated with genome-phenome systems biology approaches, genetic epidemiology, bioinformatics and precision medicine at the population level, advanced imaging modalities including molecular and metabolic imaging, and developing minimally invasive surgical and percutaneous bioengineering approaches. These new avenues of investigations could lead to new treatments that target phylogenetically conserved pathways involved in cardiac reparative mechanisms. A central point that emerged from the NHLBI Working Group meeting was that the lessons learned from the MCS investigational setting can be extrapolated to the broader HF population. With the precedents set by the significant impact of studies of other well controlled and tractable subsets on larger populations, such as the genetic work in both cancer and cardiovascular disease, the work to improve our understanding of cardiac recovery and resilience in MCS patients could be transformational for the greater HF population.

Stress-induced surface instabilities and defects in thin films sputter deposited on compliant substrates.

Existing analyses predict that thin metal films deposited on compliant substrates are subject to a variety of surface instabilities, such as wrinkles, folds, creases, etc., that become more prominent with increased compressive residual stress. Under compressive stress, cracks have been assumed to form only when the interfacial strength is weak, allowing the film to detach from the substrate. In this work, we demonstrate that cracks also form on surfaces under compressive mismatch strain when the interface is strong. In particular, we consider metal alloy films sputter deposited under bias on elastomers with different thicknesses, curing temperatures or surface treatments. The deposition parameters created residual compressive strains and strong adhesion in the bilayers. Samples without surface treatment formed wrinkles and through-thickness cracks at 0.25-0.4% mismatch strains. Only through-thickness cracks were observed in UV treated samples. The crack spacing was found to decrease by a factor of 4 when the surface was UV treated and by a factor of 3 as the elastomer thickness decreased from 30 to 6 µm. Cracks penetrated through the elastomer, 15-30 times deeper than the film thickness, and formed in all samples with a brittle coating. A numerical model was developed to explain the formation of through-thickness cracks and wrinkles under applied compressive mismatch strains. The model suggests that cracks can initiate from the peak of wrinkles when the critical fracture strength of the coating is exceeded. For the UV treated samples, through-thickness cracks are possibly impacted by the formation of an embrittled near surface PDMS layer.

Closing in on the PumpKIN Trial of the Jarvik 2015 Ventricular Assist Device.

The Infant Jarvik ventricular assist device (VAD; Jarvik Heart, Inc., New York, NY) has been developed to support the circulation of infants and children with advanced heart failure. The first version of the device was determined to have elevated hemolysis under certain conditions. The objective of this work was to determine appropriate modifications to the Infant Jarvik VAD that would result in acceptably low hemolysis levels. In vitro hemolysis testing revealed that hemolysis was related to the shape of the pump blade tips and a critical speed over which hemolysis would occur. Various design modifications were tested and a final design was selected that met the hemolysis performance goal. The new version was named the Jarvik 2015 VAD. Chronic in vivo tests, virtual fit studies, and a series of other performance tests were carried out to assess the device's performance characteristics. In vivo test results revealed acceptable hemolysis levels in a series of animals and virtual fit studies showed that the device would fit into children 8 kg and above, but could fit in smaller children as well. Additional FDA-required testing has been completed and all of the data are being submitted to the FDA so that a clinical trial of the Jarvik 2015 VAD can begin. Development of a Jarvik VAD for use in young children has been challenging for various reasons. However, with the hemolysis issue addressed in the Jarvik 2015 VAD, the device is well-poised for the start of the PumpKIN clinical trial in the near future.

Occurrence of Belonolaimus in Sinaloa, Northwestern Mexico: A New Report on Distribution and Host Range.

The present study reports the occurrence of the genus Belonolaimus in the state of Sinaloa, Mexico, associated with native plants (i.e., Ziziphus amole and Stenocereus alamosensis) in a natural coastal ecosystem. Both morphological and molecular approaches were employed to characterize the Sinaloa population. Notwithstanding of some morphological and morphometric variation between Belonolaimus from Sinaloa and other valid species, the characterization indicates that this population might belong to the Belonolaimus longicaudatus species complex. Molecular analyses based on the 28S gene and ITS1-5.8S-ITS2 regions of the ribosomal RNA (rRNA) identified four major clades within Belonolaimus; however, none of the species including B. longicaudatus, B. gracilis, and B. euthychilus were supported as monophyletic; yet monophyly is argued to be a basic requirement of species status. Sequence divergence among different Belonolaimus populations and species varied according to the rRNA dataset (i.e., ITS1-5.8S-ITS2 > 28S > 18S) used, thus showing the importance of using genes with different rates of evolution to estimate species relationships. The fact that Belonolaimus has not been found in other cultivated (including on suitable hosts) areas in Sinaloa and that this population is relatively distant from the common B. longicaudatus groups (i.e., clades A and B) suggests that its appearance was not due to a recent introduction associated with the local agriculture.

Evaluating the solid electrolyte interphase formed on silicon electrodes: a comparison of ex situ X-ray photoelectron spectroscopy and in situ neutron reflectometry.

This work details the in situ characterization of the interface between a silicon electrode and an electrolyte using a linear fluorinated solvent molecule, 0.1 M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in deuterated dimethyl perfluoroglutarate (d6-PF5M2) (1.87 × 10(-2) mS cm(-1)). The solid electrolyte interphase (SEI) composition and thickness determined via in situ neutron reflectometry (NR) and ex situ X-ray photoelectron spectroscopy (XPS) were compared. The data show that SEI expansion and contraction (breathing) during electrochemical cycling were observed via both techniques; however, ex situ XPS suggests that the SEI thickness increases during Si lithiation and decreases during delithiation, while in situ NR suggests the opposite. The most likely cause of this discrepancy is the selective removal of SEI components (top 20 nm of the SEI) during the electrode rinse process, which is required to remove the electrolyte residue prior to ex situ analysis, demonstrating the necessity of performing SEI characterization in situ.

The effect of a multicomponent multidisciplinary bundle of interventions on sleep and delirium in medical and surgical intensive care patients.

Sleep deprivation is common among intensive care patients and may be associated with delirium. We investigated whether the implementation of a bundle of non-pharmacological interventions, consisting of environmental noise and light reduction designed to reduce disturbing patients during the night, was associated with improved sleep and a reduced incidence of delirium. The study was divided into two parts, before and after changing our practice. One hundred and sixty-seven and 171 patients were screened for delirium pre- and post-intervention, respectively. Compliance with the interventions was > 90%. The bundle of interventions led to an increased mean (SD) sleep efficiency index (60.8 (3.5) before vs 75.9 (2.2) after, p = 0.031); reduced mean sound (68.8 (4.2) dB before vs 61.8 (9.1) dB after, p = 0.002) and light levels (594 (88.2) lux before vs 301 (53.5) lux after, p = 0.003); and reduced number of awakenings caused by care activities overnight (11.0 (1.1) before vs 9.0 (1.2) after, p = 0.003). In addition, the introduction of the care bundle led to a reduced incidence of delirium (55/167 (33%) before vs 24/171 (14%) after, p < 0.001), and less time spent in delirium (3.4 (1.4) days before vs 1.2 (0.9) days after, p = 0.021). Increases in sleep efficiency index were associated with a lower odds ratio of developing delirium (OR 0.90, 95% CI 0.84-0.97). The introduction of an environmental noise and light reduction programme as a bundle of non-pharmacological interventions in the intensive care unit was effective in reducing sleep deprivation and delirium, and we propose a similar programme should be implemented more widely.

Smallest metallic nanorods using physical vapor deposition.

Physical vapor deposition provides a controllable means of growing two-dimensional metallic thin films and one-dimensional metallic nanorods. While theories exist for the growth of metallic thin films, their counterpart for the growth of metallic nanorods is absent. Because of this absence, the lower limit of the nanorod diameter is theoretically unknown; consequently the experimental pursuit of the smallest nanorods has no clear target. This Letter reports a closed-form theory that defines the diameter of the smallest metallic nanorods using physical vapor deposition. Further, the authors verify the theory using lattice kinetic Monte Carlo simulations and validate the theory using published experimental data. Finally, the authors carry out a series of theory-guided experiments to grow well-separated metallic nanorods of ∼10 nm in diameter, which are the smallest ever reported using physical vapor deposition.

Bilayer graphene grown on 4H-SiC (0001) step-free mesas.

We demonstrate the first successful growth of large-area (200 × 200 µm(2)) bilayer, Bernal stacked, epitaxial graphene (EG) on atomically flat, 4H-SiC (0001) step-free mesas (SFMs) . The use of SFMs for the growth of graphene resulted in the complete elimination of surface step-bunching typically found after EG growth on conventional nominally on-axis SiC (0001) substrates. As a result heights of EG surface features are reduced by at least a factor of 50 from the heights found on conventional substrates. Evaluation of the EG across the SFM using the Raman 2D mode indicates Bernal stacking with low and uniform compressive lattice strain of only 0.05%. The uniformity of this strain is significantly improved, which is about 13-fold decrease of strain found for EG grown on conventional nominally on-axis substrates. The magnitude of the strain approaches values for stress-free exfoliated graphene flakes. Hall transport measurements on large area bilayer samples taken as a function of temperature from 4.3 to 300 K revealed an n-type carrier mobility that increased from 1170 to 1730 cm(2) V(-1) s(-1), and a corresponding sheet carrier density that decreased from 5.0 × 10(12) cm(-2) to 3.26 × 10(12) cm(-2). The transport is believed to occur predominantly through the top EG layer with the bottom layer screening the top layer from the substrate. These results demonstrate that EG synthesized on large area, perfectly flat on-axis mesa surfaces can be used to produce Bernal-stacked bilayer EG having excellent uniformity and reduced strain and provides the perfect opportunity for significant advancement of epitaxial graphene electronics technology.

A quinary WTaCrVHf nanocrystalline refractory high-entropy alloy withholding extreme irradiation environments.

In the quest of new materials that can withstand severe irradiation and mechanical extremes for advanced applications (e.g. fission & fusion reactors, space applications, etc.), design, prediction and control of advanced materials beyond current material designs become paramount. Here, through a combined experimental and simulation methodology, we design a nanocrystalline refractory high entropy alloy (RHEA) system. Compositions assessed under extreme environments and in situ electron-microscopy reveal both high thermal stability and radiation resistance. We observe grain refinement under heavy ion irradiation and resistance to dual-beam irradiation and helium implantation in the form of low defect generation and evolution, as well as no detectable grain growth. The experimental and modeling results-showing a good agreement-can be applied to design and rapidly assess other alloys subjected to extreme environmental conditions.

A controlled nucleation and growth of Si nanowires by using a TiN diffusion barrier layer for lithium-ion batteries.

Uniform size of Si nanowires (NWs) is highly desirable to enhance the performance of Si NW-based lithium-ion batteries. To achieve a narrow size distribution of Si NWs, the formation of bulk-like Si structures such as islands and chunks needs to be inhibited during nucleation and growth of Si NWs. We developed a simple approach to control the nucleation of Si NWs via interfacial energy tuning between metal catalysts and substrates by introducing a conductive diffusion barrier. Owing to the high interfacial energy between Au and TiN, agglomeration of Au nanoparticle catalysts was restrained on a TiN layer which induced the formation of small Au nanoparticle catalysts on TiN-coated substrates. The resulting Au catalysts led to the nucleation and growth of Si NWs on the TiN layer with higher number density and direct integration of the Si NWs onto current collectors without the formation of bulk-like Si structures. The lithium-ion battery anodes based on Si NWs grown on TiN-coated current collectors showed improved specific gravimetric capacities (>30%) for various charging rates and enhanced capacity retention up to 500 cycles of charging-discharging.