RESUMO
The photochromic diarylethene derivative 1,2-bis(5-(4-ethynylphenyl)-2-methylthiophen-3-yl)perfluorocyclopentene (1) was submitted to photochemical, thermal stability and fatigue resistance studies in acetonitrile, also to evaluate its possible application as a new actinometer. This photochromic system covers a wide spectral absorption range, with intense bands in the UV and visible regions for the open-ring and closed-ring isomers, respectively. Very high ring-closure quantum yield values were obtained, in contrast with the low ring-opening quantum yields, which are nevertheless high enough to exploit 1 as an actinometer. The procedure required to determine the photon flux of an irradiation source with this fatigue resistant compound is indeed very simple.
RESUMO
Light-induced processes are at the basis of fundamental natural phenomena as well as of a variety of applications. Since the functions that can arise from the interaction between light and matter depend on the degree of complexity and organization of the receiving 'matter', the research on these processes has progressively moved from molecular to supramolecular (multicomponent) systems, thereby originating the field of supramolecular photochemistry. In this context, examples of photochemical molecular devices and machines--that is, multicomponent chemical systems capable to perform specific functions under light stimulation--have been developed. Here we report examples of molecular devices in solution, where light is employed (i) to create and transport electronic energy, (ii) to displace electrons, and (iii) to set molecular components in motion, mimicking the operation of mechanical machines and motors. These studies are of interest not only for increasing the basic understanding and testing of current theoretical treatments of photoinduced processes but also eventually for the growth of nanoscience.
Assuntos
Transferência de Energia , Luz , Compostos Organometálicos/química , Compostos Organometálicos/efeitos da radiação , Elétrons , Ligantes , Substâncias Macromoleculares/química , Substâncias Macromoleculares/efeitos da radiação , Estrutura Molecular , Oxirredução , Fotoquímica , Soluções/química , Soluções/efeitos da radiaçãoRESUMO
A monocationic plug-socket connector that is composed, at the molecular level, of three components, (1) a secondary dialkylammonium center (CH2NH2+CH2), which can play the role of a plug toward dibenzo[24]crown-8 (DB24C8), (2) a rigid and conducting biphenyl spacer, and (3) 1,4-benzo-1,5-naphtho[36]crown-10 (BN36C10), capable of playing the role of a socket toward a 4,4'-bipyridinium dicationic plug, was synthesized and displays the ability to act as a plug-socket connector. The fluorescent signal changes associated with the 1,5-dioxynaphthalene unit of its BN36C10 portion were monitored to investigate the association of this plug-socket connector with the complementary socket and plug compounds. The results indicate that (1) the CH2NH2+CH2 part of the molecular connector can thread DB24C8 in a trivial manner and (2) the BN36C10 ring of the connector can be threaded by a 1,1'-dioctyl-4,4'-bipyridinium ion only after the CH2NH2+CH2 site is occupied by a DB24C8 ring. The two connections of the three-component assembly are shown to be controlled reversibly by acid/base and red/ox external inputs, respectively. The results obtained represent a key step for the design and construction of a self-assembling supramolecular system in which the molecular electron source can be connected to the molecular electron drain by a molecular elongation cable.
RESUMO
Two series of ruthenium(II) polypyridyl complexes [Ru(bipy)(2)(phpytr)](+) and [Ru(bipy)(2)(phpztr)](+) (where Hphpytr = 2-(5-phenyl-1H-[1,2,4]triazol-3-yl)-pyridine and Hphpztr = 2-(5-phenyl-1H-[1,2,4]triazol-3-yl)-pyrazine) are examined by electrochemistry, UV/Vis, emission, resonance Raman, transient resonance Raman and transient absorption spectroscopy, in order to obtain a more comprehensive understanding of their excited state electronic properties. The interpretation of the results obtained is facilitated by the availability of several isotopologues of each of the complexes examined. For the pyridine-1,2,4-triazolato based complex the lowest emissive excited state is exclusively bipy based, however, for the pyrazine based complexes excited state localisation on particular ligands shows considerable solvent and pH dependency.
Assuntos
Compostos Organometálicos/química , Piridinas/química , Rutênio/química , Análise Espectral Raman/métodos , Deutério/química , Eletroquímica , Elétrons , Ligantes , Luminescência , Conformação Molecular , Fotoquímica , Sensibilidade e Especificidade , Estereoisomerismo , TemperaturaRESUMO
We report the design, bottom-up construction, characterization, and operation of a supramolecular system capable of mimicking the function played by a macroscopic electrical extension cable. The system is made up of a light-powered electron source, an electron drain, and a cable as the molecular components programmed to self-assemble by means of two distinct plug/socket junctions. Such connections are reversible and can be operated independently by orthogonal chemical inputs. In the source-connector-drain supermolecule, photoinduced electron transfer from source to drain occurs, and it can be switched off by dual-mode chemically controlled disassembling of the molecular components.
RESUMO
The photophysical and photochemical properties of bumetanide, a sulfonamide diuretic drug, have been investigated and the photodegradation of the drug on exposure to UV-B and UV-A radiation monitored by fluorimetric and chromatographic (HPLC) methods. The main photoproducts were isolated by solid-phase extraction and liquid chromatographic procedures, and their structure elucidated by 1H-NMR and mass spectrometry. Bumetanide generates only extremely small quantities of singlet oxygen (1O2) upon irradiation in the presence of oxygen. The in vitro 3T3 N RU phototoxicity test yielded no evidence of phototoxic action.
Assuntos
Bumetanida/química , Bumetanida/toxicidade , Animais , Células 3T3 BALB , Diuréticos/química , Diuréticos/toxicidade , Técnicas In Vitro , Camundongos , Fotobiologia , Fotoquímica , Raios UltravioletaRESUMO
We have investigated the photophysical, photochemical and electrochemical properties of two bis(azo) derivatives, (E,E)-m-1 and (E,E)-p-1. The two compounds, which can be viewed as being composed of a pair of azobenzene units sharing one of their phenyl rings, differ only for the relative position of the two azo groups on the central phenyl ring-meta and para for m-1 and p-1, respectively. The UV-visible absorption spectra and photoisomerisation properties are noticeably different for the two structural isomers; (E,E)-m-1 behaves similarly to (E)-azobenzene, while (E,E)-p-1 exhibits a substantial red shift in the absorption bands and a decreased photoreactivity. The three geometric isomers of m-1, namely the E,E, E,Z and Z,Z isomers, cannot be resolved in a mixture by absorption spectroscopy, while the presence of three distinct species can be revealed by analysis of the absorption changes observed upon photoisomerisation of (E,E)-p-1. Quantum chemical ZINDO/1 calculations of vertical excitation energies nicely reproduce the observed absorption changes and support the idea that, while the absorption spectra of the geometrical isomers of m-1 are approximately given by the sum of the spectra of the constituting azobenzene units in their relevant isomeric form, this is not the case for p-1. From a detailed study on the E-->Z photoisomerisation reaction it was observed that the photoreactivity of an azo unit in m-1 is influenced by the isomeric state of the other one. Such observations indicate a different degree of electronic coupling and communication between the two azo units in m-1 and p-1, as confirmed by electrochemical experiments and quantum chemical calculations. The decreased photoisomerisation efficiency of (E,E)-p-1 compared to (E,E)-m-1 is rationalised by modelling the geometry relaxation of the lowest pi-pi* state. These results are expected to be important for the design of novel oligomers and polymers, based on the azobenzene unit, with predetermined photoreactivity.
RESUMO
The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.
RESUMO
We have designed, synthesized, and investigated a self-assembling supramolecular system which mimics, at a molecular level, the function performed by a macroscopic electrical extension cable. The system is made up of three components, 12+, 2-H3+, and 3. Component 12+ consists of two moieties: a [Ru(bpy)3]2+ unit, which plays the role of an electron donor under light excitation, and a DB24C8 crown ether, which fulfills the function of a socket. The wire-type component 2-H3+ is also composed of two moieties, a secondary dialkylammonium-ion center and a bipyridinium unit, which thread into the DB24C8 crown-ether socket of 12+ and the 1/5DN38C10 crown-ether socket 3, respectively. The photochemical, photophysical, and electrochemical properties of the three separated components, of the 12+ superset 2-H3+ and 2-H3+ subset 3 dyads, and of the 12+ superset 2-H3+ subset 3 triad have been investigated in CH2Cl2 solution containing 2% MeCN. Reversible connection/disconnection of the two plug/socket systems can be controlled independently by acid/base and redox stimulation. The behavior of the various different dyads and triad has been monitored by light absorption and emission spectroscopies, as well as by electrochemical techniques. In the fully connected 12+ superset 2-H3+ subset 3 triad, light excitation of the [Ru(bpy)3]2+ unit of component 12+ is followed by electron transfer (k = 2.8 x 108 s-1) to the bipyridinium unit of component 2-H3+, which is plugged into component 3. Possible schemes to obtain improved molecular-level electrical extension cables are discussed.
RESUMO
With the fabrication of molecular electronic devices (MEDs) and the construction of nanoelectromechanical systems (NEMSs) as incentives, two constitutionally isomeric, redox-controllable [2]rotaxanes have been synthesized and characterized in solution. Therein, they both behave as near-perfect molecular switches, that is, to all intents and purposes, these two rotaxanes can be switched precisely by applying appropriate redox stimuli between two distinct chemomechanical states. Their dumbbell-shaped components are composed of polyether chains interrupted along their lengths by i) two pi-electron rich recognition sites-a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) moiety-with ii) a rigid terphenylene spacer placed between the two recognition sites, and then terminated by iii) a hydrophobic tetraarylmethane stopper at one end and a hydrophilic dendritic stopper at the other end of the dumbbells, thus conferring amphiphilicity upon these molecules. A template-directed protocol produces a means to introduce the tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), which contains two pi-electron accepting bipyridinium units, mechanically interlocked around the dumbbell-shaped components. Both the TTF unit and the DNP moiety are potential stations for CBPQT(4+), since they can establish charge-transfer and hydrogen bonding interactions with the bipyridinium units of the cyclophane, thereby introducing bistability into the [2]rotaxanes. In both constitutional isomers, (1)H NMR and absorption spectroscopies, together with electrochemical investigations, reveal that the CBPQT(4+) ring is predominantly located on the TTF unit, leading to the existence of a single translational isomer (co-conformation) in both cases. In addition, a model [2]rotaxane, incorporating hydrophobic tetraarylmethane stoppers at both ends of its dumbbell-shaped component, has also been synthesized as a point of reference. Molecular synthetic approaches were used to construct convergently the dumbbell-shaped compounds by assembling progressively smaller building blocks in the shape of the rigid spacer, the TTF unit and the DNP moiety, and the hydrophobic and hydrophilic stoppers. The two amphiphilic bistable [2]rotaxanes are constitutional isomers in the sense that, in one constitution, the TTF unit is adjacent to the hydrophobic stopper, whereas in the other, it is next to the hydrophilic stopper. All three bistable [2]rotaxanes have been isolated as green solids. Electrospray and fast atom bombardment mass spectra support the gross structural assignments given to all three of these mechanically interlocked compounds. Their photophysical and electrochemical properties have been investigated in acetonitrile. The results obtained from these investigations confirm that, in all three [2]rotaxanes, i) the CBPQT(4+) cyclophane encircles the TTF unit, ii) the CBPQT(4+) cyclophane shuttles between the TTF and DNP stations upon electrochemical or chemical oxidation/reduction of the TTF unit, and iii) folded conformations are present in which the CBPQT(4+) cyclophane, while encircling the TTF unit, interacts through its pi-accepting bipyridinium exteriors with other pi-donating components of the dumbbells, especially those located within the stoppers.