Halide Perovskite Artificial Solids as a New Platform to Simulate Collective Phenomena in Doped Mott Insulators.

The development of quantum simulators, artificial platforms where the predictions of many-body theories of correlated quantum materials can be tested in a controllable and tunable way, is one of the main challenges of condensed matter physics. Here we introduce artificial lattices made of lead halide perovskite nanocubes as a new platform to simulate and investigate the physics of correlated quantum materials. We demonstrate that optical injection of quantum confined excitons in this system realizes the two main features that ubiquitously pervade the phase diagram of many quantum materials: collective phenomena, in which long-range orders emerge from incoherent fluctuations, and the excitonic Mott transition, which has one-to-one correspondence with the insulator-to-metal transition described by the repulsive Hubbard model in a magnetic field. Our results demonstrate that time-resolved experiments provide a quantum simulator that is able to span a parameter range relevant for a broad class of phenomena, such as superconductivity and charge-density waves.

Time-resolved thermal lens investigation of glassy dynamics in supercooled liquids: Theory and experiments.

This work reports results on the simultaneous spectroscopy of the specific heat and thermal expansivity of glycerol by making use of a wideband time-resolved thermal lens (TL) technique. An analytical model is presented which describes TL transients in a relaxing system subjected to impulsive laser heating. Experimentally, a set of TL waveforms, from 1 ns to 20 ms, has been recorded for a glycerol sample upon supercooling, from 300 to 200 K. The satisfactory fitting of the TL signals to the model allows the assessment of relaxation strength and relaxation frequency of the two quantities up to sub-100 MHz, extending the specific heat and thermal expansion spectroscopy by nearly three and eight decades, respectively. Fragility values, extracted from the relaxation behavior of the specific heat and the thermal expansion coefficient, are found to be similar, despite a substantial difference in relaxation strength.

Revisiting impulsive stimulated thermal scattering in supercooled liquids: Relaxation of specific heat and thermal expansion.

Impulsive stimulated thermal scattering (ISTS) allows one to access the structural relaxation dynamics in supercooled molecular liquids on a time scale ranging from nanoseconds to milliseconds. Till now, a heuristic semi-empirical model has been commonly adopted to account for the ISTS signals. This model implicitly assumes that the relaxation of specific heat, C, and thermal expansion coefficient, γ, occur on the same time scale and accounts for them via a single stretched exponential. This work proposes two models that assume disentangled relaxations, respectively, based on the Debye and Havriliak-Negami assumptions for the relaxation spectrum and explicitly accounting for the relaxation of C and γ separately in the ISTS response. A theoretical analysis was conducted to test and compare the disentangled relaxation models against the stretched exponential. The former models were applied to rationalize the experimental ISTS signals acquired on supercooled glycerol. This allows us to simultaneously retrieve the frequency-dependent specific heat and thermal expansion up to the sub-100 MHz frequency range and further to compare the fragility and time scale probed by thermal, mechanical, and dielectric susceptibilities.

Temperonic Crystal: A Superlattice for Temperature Waves in Graphene.

The temperonic crystal, a periodic structure with a unit cell made of two slabs sustaining temperature wavelike oscillations on short timescales, is introduced. The complex-valued dispersion relation for the temperature scalar field is investigated for the case of a localized temperature pulse. The dispersion discloses frequency gaps, tunable upon varying the slabs' thermal properties. Results are shown for the paradigmatic case of a graphene-based temperonic crystal. The temperonic crystal extends the concept of superlattices to the realm of temperature waves, allowing for coherent control of ultrafast temperature pulses in the hydrodynamic regime at above liquid nitrogen temperatures.

Controlling the Quality Factor of a Single Acoustic Nanoresonator by Tuning its Morphology.

The mechanical vibrations of individual gold nanodisks nanopatterned on a sapphire substrate are investigated using ultrafast time-resolved optical spectroscopy. The number and characteristics of the detected acoustic modes are found to vary with nanodisk geometry. In particular, their quality factors strongly depend on nanodisk aspect ratio (i.e., diameter over height ratio), reaching a maximal value of ≈70, higher than those previously measured for substrate-supported nano-objects. The peculiarities of the detected acoustic vibrations are confirmed by finite-element simulations, and interpreted as the result of substrate-induced hybridization between the vibrational modes of a nanodisk. The present findings demonstrate novel possibilities for engineering the vibrational modes of nano-objects.

Photo-induced heat generation in non-plasmonic nanoantennas.

Light-to-heat conversion in non-plasmonic, high refractive index nanoantennas is a key topic for many applications, including Raman sensing, laser writing, nanofabrication and photo-thermal therapy. However, heat generation and propagation in non-plasmonic antennas is increasingly debated and contradictory results have been reported so far. Here we report a finite element analysis of the steady-state temperature distribution and heat flow in SiO2/Si core/shell systems (silicon nanoshells) irradiated with different continuous wave lasers (λ = 532, 633 and 785 nm), under real working conditions. The complex interplay among the optical properties, morphology, degree of crystallinity of the nanoshells, thickness dependence of thermal conductivity and interactions with the substrate has been elucidated. This study reveals that all of these parameters can be appropriately combined for obtaining either stable nanoshells for Raman sensing or highly efficient sources of local heating. The optimal balance between thermal stability and field enhancement was found for crystalline Si shell layers with thicknesses ranging from 40 to 60 nm, irradiated by a NIR laser source. On the other hand, non-conformal amorphous or crystalline shell layers with a thickness >50 nm can reach a very high local temperature (above 1000 K) when irradiated with a low power density (less than 1 mW µm-2) laser sources. This work provides a general approach for an extensive investigation of the opto-thermal properties of high-index nanoantennas.

Transient eigenmodes analysis of single-impact cantilever dynamics combining Fourier and wavelet transforms.

The transient eigenmode structure of an interacting cantilever during a single impact on different surfaces evidences the excitation of higher flexural modes and low frequency oscillations. The frequency shift of the fundamental mode after the tip comes into contact with the sample surface allows calculating the tip-sample interaction stiffness and evidences the role of capillary condensation and surface wettability on the cantilever dynamics. Wavelet transforms are used to trace the origin of spectral features in the cantilever spectra and calculate force gradients of the tip-sample interaction.

Impact of supporting nanometric membranes on the thermo-optical dynamics of individual plasmonic nanodisks.

The thermal dynamics and transient optical response of individual gold nanodisks supported on thin silicon nitride membranes were investigated using optical time-resolved pump-probe spectroscopy and finite-element modeling. The effect of reducing the membrane thickness from 50 nm to 15 nm on the nanodisk thermal dynamics was explored. A significant deceleration of the nanodisk cooling kinetics was observed, and linked to a quasi-two-dimensional heat diffusion process within the 15 nm thick membrane, without detectable modification of its thermal conductivity. Systematic measurements involving different optical probe wavelengths additionally revealed the contribution of indirect membrane heating to the measured time-resolved signals, an effect particularly pronounced in the spectral range where direct optical heating of the nanodisk induces minimal ultrafast modifications of its extinction cross-section.

Complex force dynamics in atomic force microscopy resolved by wavelet transforms.

The amplitude and phase evolution of the oscillations of a cantilever after a single tip-sample impact are investigated using a cross-correlation wavelet analysis. The excitation of multiple flexural modes is evidenced and the instantaneous amplitude and phase evolution is extracted from the experimental data at all frequencies simultaneously. The instantaneous total force acting on the tip during a single impact is reconstructed. This method has general relevance for the development of an atomic force spectroscopy of single tip-sample interactions, that develop in a few oscillation cycles of the interacting cantilever eigenmodes and their harmonics.

Cooling Dynamics of Individual Gold Nanodisks Deposited on Thick Substrates and Nanometric Membranes.

The cooling dynamics of individual gold nanodisks synthesized using colloidal chemistry and deposited on solid substrates with different compositions and thicknesses were investigated using optical time-resolved spectroscopy and finite-element modeling. Experiments demonstrate a strong substrate-dependence of these cooling dynamics, which require the combination of heat transfer at the nanodisk/substrate interface and heat diffusion in the substrate. In the case of nanodisks deposited on a thick sapphire substrate, the dynamics are found to be mostly limited by the thermal resistance of the gold/sapphire interface, for which a value similar to that obtained in the context of previous experiments on sapphire-supported single gold nanodisks produced by electron beam lithography is deduced. In contrast, the cooling dynamics of nanodisks supported by nanometric silica and silicon nitride membranes are much slower and largely affected by heat diffusion in the membranes, whose efficiency is strongly reduced as compared to the thick sapphire case.

Probing thermomechanics at the nanoscale: impulsively excited pseudosurface acoustic waves in hypersonic phononic crystals.

High-frequency surface acoustic waves can be generated by ultrafast laser excitation of nanoscale patterned surfaces. Here we study this phenomenon in the hypersonic frequency limit. By modeling the thermomechanics from first-principles, we calculate the system's initial heat-driven impulsive response and follow its time evolution. A scheme is introduced to quantitatively access frequencies and lifetimes of the composite system's excited eigenmodes. A spectral decomposition of the calculated response on the eigemodes of the system reveals asymmetric resonances that result from the coupling between surface and bulk acoustic modes. This finding allows evaluation of impulsively excited pseudosurface acoustic wave frequencies and lifetimes and expands our understanding of the scattering of surface waves in mesoscale metamaterials. The model is successfully benchmarked against time-resolved optical diffraction measurements performed on one-dimensional and two-dimensional surface phononic crystals, probed using light at extreme ultraviolet and near-infrared wavelengths.

Using vital signs measurements to identify patients with COVID-19 who require early continuous positive airway pressure.

BACKGROUND: The coronavirus disease 2019 (COVID-19) can result in severe pneumonia, leading to acute respiratory distress syndrome, which are treated using continuous positive airway pressure (CPAP). Patients must be evaluated quickly to commence early CPAP if required. AIM: To identify patients with COVID-19 in the emergency department (ED) who require early CPAP, using vital signs measurements during triage. METHOD: This was a retrospective, observational, single-centre cohort study of patients with COVID-19 admitted to the ED of a university hospital in Lombardy, Italy, between 21 February 2020 and 30 April 2020. These patients were divided into two groups: those who required CPAP and those did not require CPAP. Recordings of their vital signs were retrieved from triage medical records. The vital signs values recorded in the two groups on their arrival at the ED were compared. RESULTS: Of 601 patients, 120 (20%) required CPAP. It was identified that the typical characteristics of patients requiring early CPAP were: male (P=.013) with a median age of 68 years (P=.000), oxygen saturation of 92% (P=.000), temperature ≥38°C (P=.008), respiratory rate of 26 breaths per minute (P=.000) and had received pre-hospital oxygen therapy before arriving at the ED (P=.000). The CPAP group was divided into two subgroups: patients who had received pre-hospital oxygen therapy and those who had not. The median respiratory rate values between the two subgroups presented a statistically significant difference (P=.004). CONCLUSION: This study identified the characteristics of a typical patient with COVID-19 who requires early CPAP. Based on the results, the authors have devised a triage flow chart that uses selected vital signs measurements (oxygen saturation, respiratory rate and receipt of pre-hospital oxygen therapy) to identify patients requiring early CPAP. This flow chart should be trialled in a prospective study before it is used to inform clinical decision-making.

Nanoscale self-organization and metastable non-thermal metallicity in Mott insulators.

Mott transitions in real materials are first order and almost always associated with lattice distortions, both features promoting the emergence of nanotextured phases. This nanoscale self-organization creates spatially inhomogeneous regions, which can host and protect transient non-thermal electronic and lattice states triggered by light excitation. Here, we combine time-resolved X-ray microscopy with a Landau-Ginzburg functional approach for calculating the strain and electronic real-space configurations. We investigate V2O3, the archetypal Mott insulator in which nanoscale self-organization already exists in the low-temperature monoclinic phase and strongly affects the transition towards the high-temperature corundum metallic phase. Our joint experimental-theoretical approach uncovers a remarkable out-of-equilibrium phenomenon: the photo-induced stabilisation of the long sought monoclinic metal phase, which is absent at equilibrium and in homogeneous materials, but emerges as a metastable state solely when light excitation is combined with the underlying nanotexture of the monoclinic lattice.

Ultrafast nano generation of acoustic waves in water via a single carbon nanotube.

Generation of ultra high frequency acoustic waves in water is key to nano resolution sensing, acoustic imaging and theranostics. In this context water immersed carbon nanotubes (CNTs) may act as an ideal optoacoustic source, due to their nanometric radial dimensions, peculiar thermal properties and broad band optical absorption. The generation mechanism of acoustic waves in water, upon excitation of both a single-wall (SW) and a multi-wall (MW) CNT with laser pulses of temporal width ranging from 5 ns down to ps, is theoretically investigated via a multiscale approach. We show that, depending on the combination of CNT size and laser pulse duration, the CNT can act as a thermophone or a mechanophone. As a thermophone, the CNT acts as a nanoheater for the surrounding water, which, upon thermal expansion, launches the pressure wave. As a mechanophone, the CNT acts as a nanopiston, its thermal expansion directly triggering the pressure wave in water. Activation of the mechanophone effect is sought to trigger few nanometers wavelength sound waves in water, matching the CNT acoustic frequencies. This is at variance with respect to the commonly addressed case of water-immersed single metallic nano-objects excited with ns laser pulses, where only the thermophone effect significantly contributes. The present findings might be of impact in fields ranging from nanoscale non-destructive testing to water dynamics at the meso to nanoscale.

Mechanical Properties of Nanoporous Metallic Ultrathin Films: A Paradigmatic Case.

Nanoporous ultrathin films, constituted by a slab less than 100 nm thick and a certain void volume fraction provided by nanopores, are emerging as a new class of systems with a wide range of possible applications, including electrochemistry, energy storage, gas sensing and supercapacitors. The film porosity and morphology strongly affect nanoporous films mechanical properties, the knowledge of which is fundamental for designing films for specific applications. To unveil the relationships among the morphology, structure and mechanical response, a comprehensive and non-destructive investigation of a model system was sought. In this review, we examined the paradigmatic case of a nanoporous, granular, metallic ultrathin film with comprehensive bottom-up and top-down approaches, both experimentals and theoreticals. The granular film was made of Ag nanoparticles deposited by gas-phase synthesis, thus providing a solvent-free and ultrapure nanoporous system at room temperature. The results, bearing generality beyond the specific model system, are discussed for several applications specific to the morphological and mechanical properties of the investigated films, including bendable electronics, membrane separation and nanofluidic sensing.

Thermal dynamics and electronic temperature waves in layered correlated materials.

Understanding the mechanism of heat transfer in nanoscale devices remains one of the greatest intellectual challenges in the field of thermal dynamics, by far the most relevant under an applicative standpoint. When thermal dynamics is confined to the nanoscale, the characteristic timescales become ultrafast, engendering the failure of the common description of energy propagation and paving the way to unconventional phenomena such as wave-like temperature propagation. Here, we explore layered strongly correlated materials as a platform to identify and control unconventional electronic heat transfer phenomena. We demonstrate that these systems can be tailored to sustain a wide spectrum of electronic heat transport regimes, ranging from ballistic, to hydrodynamic all the way to diffusive. Within the hydrodynamic regime, wave-like temperature oscillations are predicted up to room temperature. The interaction strength can be exploited as a knob to control the dynamics of temperature waves as well as the onset of different thermal transport regimes.

Discrimination of nano-objects via cluster analysis techniques applied to time-resolved thermo-acoustic microscopy.

Time-effective, unsupervised clustering techniques are exploited to discriminate nanometric metal disks patterned on a dielectric substrate. The discrimination relies on cluster analysis applied to time-resolved optical traces obtained from thermo-acoustic microscopy based on asynchronous optical sampling. The analysis aims to recognize similarities among nanopatterned disks and to cluster them accordingly. Each cluster is characterized by a fingerprint time-resolved trace, synthesizing the common features of the thermo-acoustics response of the composing elements. The protocol is robust and widely applicable, not relying on any specific knowledge of the physical mechanisms involved. The present route constitutes an alternative diagnostic tool for on-chip non-destructive testing of individual nano-objects.

Correlation between continuous Positive end-expiratory pressure (PEEP) values and occurrence of Pneumothorax and Pneumomediastinum in SARS-CoV2 patients during non-invasive ventilation with Helmet.

BACKGROUND: Acute Hypoxemic Respiratory Failure is a common complication of SARS-CoV2 related pneumonia, for which non-invasive ventilation (NIV) with Helmet Continuous Positive Airway Pressure (CPAP) is widely used. The frequency of pneumothorax in SARS-CoV2 was reported in 0.95% of hospitalized patients in 6% of mechanically ventilated patients, and in 1% of a post-mortem case series. OBJECTIVES: Aim of our retrospective study was to investigate the incidence of pneumothorax and pneumomediastinum (PNX/PNM) in SARS-CoV2 pneumonia patients treated with Helmet CPAP. Moreover, we examined the correlation between PNX/PNM and Positive end-expiratory pressure (PEEP) values. METHODS: We collected data from patients admitted to "Luigi Sacco" University Hospital of Milan from 2 February to 5 May 2020 with SARS-CoV2 pneumonia requiring CPAP. Patients, who need NIV with bi-level pressure or endotracheal intubation (ETI) for any reason except those who needed ETI after PNX/PNM, were excluded. Population was divided in two groups according to PEEP level used (≤10 cmH2O and >10 cmH20). RESULTS: 154 patients were enrolled. In the overall population, 42 patients (27%) were treated with High-PEEP (>10 cmH2O), and 112 with Low-PEEP (≤10 cmH2O). During hospitalization 3 PNX and 2 PNM occurred (3.2%). Out of these five patients, 2 needed invasive ventilation after PNX and died. All the PNX/PNM occurred in the High-PEEP group (5/37 vs 0/112, p<0,001). CONCLUSION: The incidence of PNX appears to be lower in SARS-CoV2 than SARS and MERS. Considering the association of PNX/PNM with high PEEP we suggest using the lower PEEP as possible to prevent these complications.

Optical wavelength dependence of photoacoustic signal of gold nanofluid.

We investigate the optical wavelength dependence of the photoacoustic (PA) signal, detected with bandwidth (BW) in the MHz range, of gold nanospheres (NSs) immersed in water upon illumination with ns laser pulses. We compare the wavelength dependence of the PA signal (within the MHz BW) with the one of the optical absorption coefficient as determined from optical transmission measurements. Thermal boundary conductance (TBC) at the gold-water interface is taken into account, as well as the temperature dependence of the thermal expansion coefficient of water. The effects of NS size and laser pulse duration on the PA signal are also explored. The PA signal is investigated with an opto-thermo-acoustic model considering light absorption in gold NS and in a surrounding water shell.

Antimicrobial Nanostructured Coatings: A Gas Phase Deposition and Magnetron Sputtering Perspective.

Antimicrobial coatings are a promising strategy to counteract the spreading of multi-drug-resistant pathogens through cross-contamination of surfaces. Coatings with nanostructured characteristics can exploit the different antimicrobial mechanisms of nanomaterials provided the composition, the morphology and the mechanical properties of the film can be tuned by the specific synthesis methods. This review addresses the synthesis of antibacterial nanostructured coatings with a focus on physical synthesis methods. After a short description of the bacteria-NP interaction mechanism, leading to the killing of cells, paradigmatic examples of coatings, obtained by magnetron sputtering and supersonic cluster beam deposition, are discussed, with an emphasis on the possibility of combining different elements into the coating to widen the bactericidal spectrum.