Computational Insights into the Photoinduced Dimeric Gold-Catalyzed Divergent Dechloroalkylation of gem-Dichloroalkanes with Alkenes.

The employment of dinuclear Au(I) catalysts in photomediated modern organic transformations has attracted significant attention over the past decade, which commonly demonstrates unique catalytic performance compared with the corresponding mononuclear gold complexes. Nevertheless, detailed mechanisms of dinuclear gold catalysis remain ambiguous, and further mechanistic understanding is highly desirable. Herein, computational studies were carried out to gain mechanistic insights into the photoinduced dinuclear gold-catalyzed divergent dechloroalkylation of gem-dichloroalkanes. Computational results suggest that a proton transfer from the additive, Hantzsch ester (HE), to the base, guanidine, could lead to an ionic pair complex, which is ready to undergo excitation under blue light irradiation to result in the corresponding triplet excited state. Then, the excited complex might undergo oxidative quenching with the dinuclear gold photocatalyst [AuI-AuI]2+, via a single-electron-transfer (SET) step to afford an unusual [Au1/2-Au1/2]+ dinuclear species. The corresponding mononuclear gold catalyst, [AuI]+, however, is not ready to enable the analogous step to give a [Au0] species, which might account for the unique characteristics of dinuclear gold catalysis. Subsequently, the formed [Au1/2-Au1/2]+ intermediate could trigger a Cl-atom transfer from dichloromethane in an inner-sphere manner to furnish a critical chloromethyl radical. Next, the resulting chloromethyl radical could attack the alkenyl moiety of substrates to generate the corresponding alkyl radicals. Then, three possible mechanistic pathways were explored to rationalize the substrate-dependent divergent transformations in this protocol. The main factors responsible for the diversified transformations were discussed.

Surface Defect and Wettability Engineering of Porous SnOx for Reliable Bioassays with High Selectivity and Wide Linear Dynamic Range.

Bioassay systems that can selectively detect biomarkers at both high and low levels are of great importance for clinical diagnosis. In this work, we report an enzyme electrode with an oxygen reduction reaction (ORR)-tolerant H2O2 reduction property and an air-liquid-solid triphase interface microenvironment by regulating the surface defects and wettability of nanoporous tin oxide (SnOx). The enzyme electrode allows the oxygen that is required for the oxidase catalytic reaction to be transported from the air phase to the reaction zone, which greatly enhances the enzymatic kinetics and increases the linear detection upper limit. Meanwhile, the ORR-tolerant H2O2 reduction property of SnOx catalysts achieved via oxygen vacancy engineering greatly reduces the interferent signals caused by oxygen and various easily oxidizable endogenous/exogenous species, which enables the selective detection of biomarkers at trace levels. The synergistic effect between these two novel qualities features a bioassay system with a wide dynamic linear range and high selectivity for the accurate detection of a wide range of biomarkers, such as glucose, lactic acid, uric acid, and galactose, offering the potential for reliable clinical diagnosis applications.

Computational insights into the zeolite-supported gold nanocluster-catalyzed ethanol dehydrogenation to acetaldehyde.

Zeolite-supported gold nanoclusters play increasingly important roles in heterogeneous catalysis and exhibit unique catalytic properties for ethanol dehydrogenation to acetaldehyde. Nevertheless, the reaction mechanism and potential roles of the zeolite-encapsulated gold nanoclusters during the catalytic process remain unclear. Herein, computational studies were carried out to gain mechanistic insights into ethanol dehydrogenation to acetaldehyde under both aerobic and anaerobic conditions catalyzed by a silicalite-1 zeolite-encapsulated Au3 cluster cation (Au3+-S1). The presence of O2 can significantly promote the ethanol dehydrogenation catalyzed by Au3+-S1. A feasible mechanistic pathway could be initiated via the O2 induced H-atom transfer (HAT) step from the hydrogen of the hydroxyl group to afford ethoxy and OOH radical species. Subsequently, the OOH induced second HAT from α-C-H of the ethoxy intermediate could follow to afford the acetaldehyde product. Moreover, the possible confinement and stabilization effect of the zeolite channels on the ethanol dehydrogenation reaction was discussed.

Organo-Photocatalytic Anti-Markovnikov Hydroamidation of Alkenes with Sulfonyl Azides: A Combined Experimental and Computational Study.

The construction of C(sp3)-N bonds via direct N-centered radical addition with olefins under benign conditions is a desirable but challenging strategy. Herein, we describe an organo-photocatalytic approach to achieve anti-Markovnikov alkene hydroamidation with sulfonyl azides in a highly efficient manner under transition-metal-free and mild conditions. A broad range of substrates, including both activated and unactivated alkenes, are suitable for this protocol, providing a convenient and practical method to construct sulfonylamide derivatives. A synergistic experimental and computational mechanistic study suggests that the additive, Hantzsch ester (HE), might undergo a triplet-triplet energy transfer manner to achieve photosensitization by the organo-photocatalyst under visible light irradiation. Next, the resulted triplet excited state 3HE* could lead to a homolytic cleavage of C4-H bond, which triggers a straightforward H-atom transfer (HAT) style in converting sulfonyl azide to the corresponding key amidyl radical. Subsequently, the addition of the amidyl radical to alkene followed by HAT from p-toluenethiol could proceed to afford the desired anti-Markovnikov hydroamidation product. It is worth noting that mechanistic pathway bifurcation could be possible for this reaction. A feasible radical chain propagation mechanistic pathway is also proposed to rationalize the high efficiency of this reaction.

Temperature-Responsive Formation Cycling Enabling LiF-Rich Cathode-Electrolyte Interphase.

Formation of LiF-rich cathode-electrolyte interphase is highly desirable for wide-temperature battery, but its application is hindered by the unwanted side reactions associated with conventional method of introducing fluorinated additives. Here, we developed an additive-free strategy to produce LiF-rich cathode electrolyte interphase (CEI) by low-temperature formation cycling. Using LiNi0.33Mn0.33Co0.33O2 as a model cathode, the atomic ratio of LiF in the CEI formed at -5 °C is about 17.7 %, enhanced by ~550 % compared to CEI formed at 25 °C (2.7 %). The underlying mechanism is uncovered by both experiments and theoretic simulation, indicating that the decomposition of LiPF6 to LiF is transformed into spontaneous and exothermic on positively charged cathode surface and lowering the temperature shift chemical equilibrium towards the formation of LiF-rich CEI. Superior to conventional fluorinated additives, this approach is free from unwanted side reactions, imparting batteries with both high-temperature (60 °C) cyclability and low-temperature rate performance (capacity enhanced by 100 % at 3 C at -20 °C). This low-temperature formation cycling to construct LiF-rich CEI is extended to various cathode systems, such as LiNi0.8Mn0.1Co0.1O2, LiCoO2, LiMn2O4, demonstrating the versatility and potential impact of our strategy in advancing the performance and stability of wide-temperature batteries and beyond.

Copper-Catalyzed Radical Allene C(sp2 )-H Cyanation.

While the hydrogen atom abstraction (HAA) from C(sp3 )-H bond has been well explored, the radical-mediated chemo- and regio-selective functionalization of allenic C(sp2 )-H bond via direct HAA from C(sp2 )-H bond of allene remains an unsolved challenge in synthetic chemistry. This is primarily due to inherent challenges with addition of radical intermediates to allenes, regioselectivity of HAA process, instability of allenyl radical toward propargyl radical et al. Herein, we report a copper catalyzed allenic C(sp2 )-H cyanation of an array of tri- and di-substituted allenes with exceptional site-selectivity, while mono-substituted allene was successfully cyanated, albeit with a low yield. In the developed strategy, steric N-fluoro-N-alkylsulfonamide, serving as precursor of hydrogen atom abstractor, plays a crucial role in achieving the desired regioselectivity and avoiding addition of N-centered radical to allene.

Cobalt-Promoted Noble-Metal Catalysts for Efficient Hydrogen Generation from Ammonia Borane Hydrolysis.

Ammonia borane (AB) has been regarded as a promising material for chemical hydrogen storage. However, the development of efficient, cost-effective, and stable catalysts for H2 generation from AB hydrolysis remains a bottleneck for realizing its practical application. Herein, a step-by-step reduction strategy has been developed to synthesize a series of bimetallic species with small sizes and high dispersions onto various metal oxide supports. Superior to other non-noble metal species, the introduction of Co species can remarkably and universally promote the catalytic activity of various noble metals (e.g., Pt, Rh, Ru, and Pd) in AB hydrolysis reactions. The optimized Pt0.1%Co3%/TiO2 catalyst exhibits a superhigh H2 generation rate from AB hydrolysis, showing a turnover frequency (TOF) value of 2250 molH2 molPt-1 min-1 at 298 K. Such a TOF value is about 10 and 15 times higher than that of the monometal Pt/TiO2 and commercial Pt/C catalysts, respectively. The density functional theory (DFT) calculation reveals that the synergy between Pt and CoO species can remarkably promote the chemisorption and dissociation of water molecules, accelerating the H2 evolution from AB hydrolysis. Significantly, the representative Pt0.25%Co3%/TiO2 catalyst exhibits excellent stability, achieving a record-high turnover number of up to 215,236 at room temperature. The excellent catalytic performance, superior stability, and low cost of the designed catalysts create new prospects for their practical application in chemical hydrogen storage.

A Bioorthogonal Decaging Chemistry of N-Oxide and Silylborane for Prodrug Activation both In Vitro and In Vivo.

Bioorthogonal decaging chemistry with both fast kinetics and high efficiency is highly demanded for in vivo applications but remains very sporadic. Herein, we describe a new bioorthogonal decaging chemistry between N-oxide and silylborane. A simple replacement of "C" in boronic acid with "Si" was able to substantially accelerate the N-oxide decaging kinetics by 106 fold (k2: up to 103 M-1 s-1). Moreover, a new N-oxide-masked self-immolative spacer was developed for the traceless release of various payloads upon clicking with silylborane with fast kinetics and high efficiency (>90%). Impressively, one such N-oxide-based self-assembled bioorthogonal nano-prodrug in combination with silylborane led to significantly enhanced tumor suppression effects as compared to the parent drug in a 4T1 mouse breast tumor model. In aggregate, this new bioorthogonal click-and-release chemistry is featured with fast kinetics and high efficiency and is perceived to find widespread applications in chemical biology and drug delivery.

Aerosol Spray Drying Guided Synthesis of Ultrasmall Alloyed Bimetallic Nanoparticles Supported on Silica for Catalytic Semihydrogenation.

Supported bimetallic nanoparticles (NPs) with ultrasmall sizes and homogeneous alloying are attractive for catalysis. However, facile synthesis of this type of material remains very challenging. Here, the aerosol drying impregnation method for rapid, scalable, and general synthesis of silica-supported bimetallic NPs is proposed. The method relies on aerosol spray drying to promote the mixing and dispersing of binary metal precursors on SiO2 . It is capable of controlling the composition and size of bimetallic NPs and avoids the use of expensive metal complex salts and complicated experiment procedures. Twelve permutations combining a noble metal (Pd, Ru, and Pt) and a base one (Fe, Co, Ni, and Cu) with ultrasmall sizes (1.4-2.2 nm in average size), uniform dispersion, and good alloying are synthesized. Interesting activity and selectivity trends in catalytic semihydrogenation of phenylacetylene over the supported Pd-based NPs can be observed. The silica-supported PdNi NPs deliver both high activity and styrene selectivity. Spectroscopic and density functional theory calculation results reveal the improved chemoselectivity originated from the suitably down-shifted d-band center of the PdNi NPs inducing an increased energy barrier for overhydrogenation and a weakened styrene adsorption.

Computational Understanding of Dual Gold and Photoredox-Catalyzed Regioselective Thiosulfonylation of Alkenes.

Herein, a computational work was carried out to gain mechanistic insights into dual gold and photoredox-catalyzed regioselective thiosulfonylation of alkenes with PhSO2SCF3. Computational results suggest that it is more favorable for the complex of Au(I) with PhSO2SCF3 (INT1), instead of an Au(I) catalyst or individual substrates, to quench the excited *[Ru]II photocatalyst in a single-electron oxidative manner to afford [Ru]III. The complexation of the Au(I) catalyst with PhSO2SCF3 could lead to a substantially lowered energy level of the lowest unoccupied molecular orbital, which may be mainly responsible for the feasibility of INT1 in quenching the excited photocatalyst. The resultant single-electron reduced complex, subsequently, is ready to undergo a S-S bond cleavage to form an Au(I)-SCF3 species and a benzenesulfonyl radical. Next, the yielded Au(I)-SCF3 species could undergo single-electron oxidation by [Ru]III to afford an Au(II) intermediate. Subsequently, the binding with an alkyl radical for the formed Au(II) species could occur to further convert to an Au(III) species, from which the final product can be furnished by a reductive elimination step and the Au(I) catalyst is regenerated. Thus, an Au(I)/Au(II)/Au(III)/Au(I) catalytic cycle is suggested to mainly account for the regioselective thiosulfonylation of alkenes.

Synthesis of Spiro 3,3'-Cyclopropyl Oxindoles Via N-Bromosuccinimide-Mediated Ring-Closing and Contraction Cascade.

An N-bromosuccinimide-mediated cascade reaction involving the cyclization/oxygen-migration/ring-contraction process of 3-(ß, ß-diaryl) indolylethanol was disclosed. A variety of spiro 3,3'-cyclopropyl oxindole derivatives were efficiently synthesized in good yields under mild reaction conditions. A possible mechanism was suggested based on intermediate isolation and computational studies.

Insights into the Mechanisms and Chemoselectivities of Carbamates and Amides in Reactions Involving Rh(II)-Azavinylcarbene: A Computational Study.

Reactions involving Rh(II)-azavinylcarbenes (Rh(II)-AVCs) to synthesize nitrogen-containing compounds have attracted significant research interest. Despite the importance of these reactions, controlling the chemoselectivities in the reactions involving Rh(II)-AVC remains a challenge. To understand the mechanisms and factors controlling the chemoselectivities between N-H and C═O groups of carbamates and amides in reactions involving Rh(II)-AVC, computational studies were employed. The results reveal that not only the greater nucleophilicity of the N-H group than that of the carbonyl group, but also the presence of H-bonding interactions, could favor the addition of the N-H group of primary carbamates to Rh(II)-AVC. However, for secondary carbamates and amides, they could undergo either chemoselective N-H or C═O addition. Secondary carbamates with less steric hindrance, such as oxazolidinone, prefer the N-H addition mode. However, a switch in chemoselectivity (preference for the C═O addition) was revealed for the sterically hindered secondary carbamates/amides. In addition, a possible O-H addition pathway via the keto-enol tautomerization for isatin and isatoic anhydride was disregarded due to the energetically demanding barrier. Instead, a pathway involving the chemoselective C═O addition, formal [3 + 2] cycloaddition, followed by ring opening was proposed. The origins of the chemoselectivity and the factors responsible were addressed.

Copper-Catalyzed Oxidative sp3-Carbon Radical Cross-Coupling with Trialkylphosphites Leading to α-Phosphonyl 1,3-Dicarbonyl Compounds.

A copper-catalyzed radical Csp3-H/P(OR)3 cross-coupling reaction for the formation of Csp3-P bonds is described. A range of 1,3-dicarbonyl compounds and trialkylphosphites were coupled in this fashion to give the corresponding products in moderate to good yields. This protocol provides direct access to α-phosphonyl 1,3-dicarbonyl compounds.

Intramolecular Imino-ene Reaction of Azirines: Regioselectivity, Diastereoselectivity, and Computational Insights.

Intramolecular imino-ene reaction of 2 H-aziridine has been studied experimentally and computationally, demonstrating that (1) the concerted process takes place regioselectively on the alkene E-CH group; (2) the geometry of the N-linker impacts the reaction activation energy and diastereoselectivity significantly, with pyramidal alkyl amine as the linkage, an exclusive cis-product is achieved; (3) when the reaction has to occur with the Z-CH group, the cis-diastereoselectivity is solely observed regardless of the nature of the N-linkage.

Intermolecular C-H Amidation of (Hetero)arenes to Produce Amides through Rhodium-Catalyzed Carbonylation of Nitrene Intermediates.

Amide bond formation is one of the most important reactions in organic chemistry because of the widespread presence of amides in pharmaceuticals and biologically active compounds. Existing methods for amides synthesis are reaching their inherent limits. Described herein is a novel rhodium-catalyzed three-component reaction to synthesize amides from organic azides, carbon monoxide, and (hetero)arenes via nitrene-intermediates and direct C-H functionalization. Notably, the reaction proceeds in an intermolecular fashion with N2 as the only by-product, and either directing groups nor additives are required. The computational and mechanistic studies show that the amides are formed via a key Rh-nitrene intermediate.

Lewis Base/Brønsted Acid Co-catalyzed Enantioselective Sulfenylation/Semipinacol Rearrangement of Di- and Trisubstituted Allylic Alcohols.

An enantioselective sulfenylation/semipinacol rearrangement of 1,1-disubstituted and trisubstituted allylic alcohols was accomplished with a chiral Lewis base and a chiral Brønsted acid as cocatalysts, generating various ß-arylthio ketones bearing an all-carbon quaternary center in moderate to excellent yields and excellent enantioselectivities. These chiral arylthio ketone products are common intermediates with many applications, for example, in the design of new chiral catalysts/ligands and the total synthesis of natural products. Computational studies (DFT calculations) were carried out to explain the enantioselectivity and the role of the chiral Brønsted acid. Additionally, the synthetic utility of this method was exemplified by an enantioselective total synthesis of (-)-herbertene and a one-pot synthesis of a chiral sulfoxide and sulfone.

Mechanistic Insights into Cyclopropenes-Involved Carbonylative Carbocyclization Catalyzed by Rh(I) Catalyst: A DFT Study.

Computational studies were carried out to provide mechanistic insights into the Rh(I)-catalyzed activation of cyclopropenes and the detailed mechanistic pathways of [3+2+1] carbonylative carbocyclization of tethered ene- and yne-cyclopropenes. Computational results suggest that it is more favorable for the cyclopropene moiety of tethered ene-cyclopropenes to initially undergo heterolytic cleavage of a C-C σ-bond to form a vinyl Rh(I) carbenoid intermediate than to proceed through homolytic C-C σ-bond cleavage to generate a rhodacyclobutene intermediate. The yielded vinyl Rh(I) carbenoid intermediate could undergo cyclization to generate a Rh(III) metallacyclobutene intermediate, which could further lead to a thermodynamically more stable six-coordinated Rh(III) metallacycle intermediate in the presence of additional CO. Afterward, it is more feasible for the yielded six-coordinated Rh(III) metallacycle to sequentially undergo CO migratory insertion, cyclization, and reductive elimination to furnish the final cyclohexenone product. The origin of stereoselectivity of the product was also discussed. The proposed mechanistic pathway can also be applied to the Rh(I)-catalyzed carbonylative carbocyclization of tethered yne-cyclopropenes and vinyl cyclopropenes to produce phenol derivatives. The main mechanistic difference for the vinyl cyclopropene substrate is that the conversion of Rh(I) carbenoid intermediate to the Rh(III) metallacycle proceeds via intramolecular 6π electrocyclization.

n-Butyllithium Catalyzed Selective Hydroboration of Aldehydes and Ketones.

Highly efficient and selective hydroboration of aldehydes and ketones with HBpin is achieved by using the simple and convenient n-BuLi as a catalyst. The reaction proceeds rapidly with low catalyst loading (0.1-0.5 mol %) under mild conditions. Key features include the high catalytic efficiency, exceptional functional group compatibility, ample substrate scope, and high selectivity for aldehydes over ketones. Computational studies were carried out to provide a mechanistic insight into the n-BuLi catalyzed hydroboration of aldehydes/ketones with HBpin.

Highly efficient hydroboration of carbonyl compounds catalyzed by tris(methylcyclopentadienyl)lanthanide complexes.

Homoleptic lanthanide complexes coordinated by a Me-substituted Cp ligand [(MeCp)3Ln] demonstrate unprecedentedly high efficiency in catalyzing the hydroboration of aldehydes and ketones with pinacolborane. This protocol is also applicable for the hydroboration of aryl-substituted imines. In addition, broad functional group compatibility and excellent chemoselectivity is also achieved. DFT calculations are employed to shed light on the reaction mechanism.

In situ generation of nitrile oxides from copper carbene and tert-butyl nitrite: synthesis of fully substituted isoxazoles.

Herein, we present a novel [3 + 2] cycloaddition reaction of ß-keto esters with nitrile oxides, which were generated in situ from copper carbene and tert-butyl nitrite. This three-component reaction provides new methodology for the direct synthesis of fully substituted isoxazole derivatives, featuring mild reaction conditions, readily accessible starting materials and simple operation. The experimental studies and DFT calculations suggest that the reaction starts with the generation of the key intermediate nitrile oxides, followed by a [3 + 2] cycloaddition reaction of ß-keto esters to give the final isoxazole products.