A dual-plate ITO-ITO generator-collector microtrench sensor: surface activation, spatial separation and suppression of irreversible oxygen and ascorbate interference.

Generator-collector electrode systems are based on two independent working electrodes with overlapping diffusion fields where chemically reversible redox processes (oxidation and reduction) are coupled to give amplified current signals. A generator-collector trench electrode system prepared from two tin-doped indium oxide (ITO) electrodes placed vis-à-vis with a 22 µm inter-electrode gap is employed here as a sensor in aqueous media. The reversible 2-electron anthraquinone-2-sulfonate redox system is demonstrated to give well-defined collector responses even in the presence of oxygen due to the irreversible nature of the oxygen reduction. For the oxidation of dopamine on ITO, novel "Piranha-activation" effects are observed and chemically reversible generator-collector feedback conditions are achieved at pH 7, by selecting a more negative collector potential, again eliminating possible oxygen interference. Finally, dopamine oxidation in the presence of ascorbate is demonstrated with the irreversible oxidation of ascorbate at the "mouth" of the trench electrode and chemically reversible oxidation of dopamine in the trench "interior". This spatial separation of chemically reversible and irreversible processes within and outside the trench is discussed as a potential in situ microscale sensing and separation tool.

Diffusional transport to and through thin-layer nanoparticle film modified electrodes: capped CdSe nanoparticle modified electrodes.

We present a simple and general theoretical model which accounts fully for the influence of an electrode modifying non-electroactive layer on the voltammetric response of a diffusional redox probe. The layer is solely considered to alter the solubilities and diffusion coefficients of the electroactive species within the thin layer on the electrode surface. On this basis it is demonstrated how, first, the apparent electrochemical rate constant can deviate significantly from that measured at an unmodified electrode. Second, depending on the conditions within the layer the modification of the electrode may lead to either apparent 'negative' or 'positive' electrocatalytic effects without the true standard electrochemical rate constant for the electron transfer at the electrode surface being altered. Having presented the theoretical model three experimental cases are investigated, specifically, the reductions of ruthenium(III) hexaamine, oxygen and boric acid on a gold macro electrode with and without a multi-layer organic capped nanoparticle film. In the latter case of the reduction of boric acid the voltammetric reduction is found to be enhanced by the presence of the organic layer. This result is interpreted as being due to an increase in the solubility of the analyte within the non-electroactive layer and not due to an alteration of the standard electrochemical rate constant.

Cavity transport effects in generator-collector electrochemical analysis of nitrobenzene.

Two types of generator-collector electrode systems, (i) a gold-gold interdigitated microband array and (ii) a gold-gold dual-plate microtrench, are compared for nitrobenzene electroanalysis in aerated aqueous 0.1 M NaOH. The complexity of the nitrobenzene reduction in conjunction with the presence of ambient levels of oxygen in the analysis solution provide a challenging problem in which feedback-amplified generator-collector steady state currents provide the analytical signal. In contrast to the more openly accessible geometry of the interdigitated array electrode, where the voltammetric response for nitrobenzene is less well-defined and signals drift, the voltammetric response for the cavity-like microtrench electrode is stable and readily detectable at 1 µM level. Both types of electrode show oxygen-enhanced low concentration collector current responses due to additional feedback via reaction intermediates. The observations are rationalised in terms of a "cavity transport coefficient" which is beneficial in the dual-plate microtrench, where oxygen interference effects are suppressed and the analytical signal is amplified and stabilised.

A gold-gold oil microtrench electrode for liquid-liquid anion transfer voltammetry.

Two flat gold electrodes are placed vis-à-vis with an epoxy spacer layer that is etched out to give a ca. 100 µm-deep electrochemically active trench. A water-insoluble oil phase, here the redox system N,N-diethyl-N'N'-didodecyl-phenylenediamine (DDPD) in 4-(3-phenylpropyl)-pyridine (PPP), is immobilized into the trench to allow anion transfer upon oxidation of DDPD (oil) to DDP⁺ (oil). In "mono-potentiostatic mode" quantitative transfer/expulsion of anions into the trench oil phase occurs. However, in "bi-potentiostatic mode" feedback currents dominated by rapid plate-to-plate diffusion normal to the electrode surfaces are observed. Comparison of "normal" diffusion and "lateral" diffusion shows that the rate of diffusion-migration charge transport across the oil film is anion hydrophobicity dependent.

New chemical insights using weakly supported voltammetry: the reductive cleavage of Aryl-Br bonds is reversible.

Cyclic voltammetry carried out at a wide range of supporting electrolyte concentrations and compositions can elucidate additional kinetic and mechanistic details of the electrochemical reduction of aryl halides. The cleavage of the C-Br bond is reversible, driven by H abstraction and the second electron transfer. This is a new chemical insight, as the cleavage of such bonds has usually been regarded as irreversible.

New chemical insights using weakly supported voltammetry: ion pairing in the EC2 reduction of 2,6-diphenylpyrylium in acetonitrile.

Pairing effect: Varying the concentration of support electrolyte in the electrochemical EC(2) reduction of 2,6-diphenylpyrylium reveals the presence of ion pairing between the electroactive species and BF(4)(-). Experiment and theory are shown to be in good agreement only if ion pairing is included in the simulations. This previously unanticipated effect is only observable if voltammetry is performed under conditions of weak support.

Generator-collector double electrode systems: a review.

A variety of generator-collector systems are reviewed, from the original rotating ring-disc electrodes developed in the 1950s, to very recent developments using new geometries and microelectrodes. An overview of both theoretical and experimental aspects are given, and the power of these double electrode systems in analytical electrochemistry is illustrated with a range of applications.

Recent Advances in Voltammetry.

Recent progress in the theory and practice of voltammetry is surveyed and evaluated. The transformation over the last decade of the level of modelling and simulation of experiments has realised major advances such that electrochemical techniques can be fully developed and applied to real chemical problems of distinct complexity. This review focuses on the topic areas of: multistep electrochemical processes, voltammetry in ionic liquids, the development and interpretation of theories of electron transfer (Butler-Volmer and Marcus-Hush), advances in voltammetric pulse techniques, stochastic random walk models of diffusion, the influence of migration under conditions of low support, voltammetry at rough and porous electrodes, and nanoparticle electrochemistry. The review of the latter field encompasses both the study of nanoparticle-modified electrodes, including stripping voltammetry and the new technique of 'nano-impacts'.