Root resorption in Class II malocclusion treatment with and without maxillary premolar extractions.

INTRODUCTION: Class II malocclusion treatment efficiency with maxillary premolar extractions has been reported. However, no study evaluated the root resorption associated with this protocol. Therefore, this study aimed to compare the degree of root resorption of the maxillary incisors in Class II malocclusion treatment with and without maxillary premolar extractions. METHODS: The sample consisted of 56 patients with complete Class II malocclusion, divided into 2 groups. Group 1 comprised 28 patients (10 female, 18 male) treated with maxillary first premolar extractions, and group 2 was composed of 28 patients (16 female, 12 male) treated without extractions. The groups were matched regarding initial age, treatment time, crowding, initial malocclusion severity, finishing quality, initial overjet, and overbite. Periapical radiographs of the maxillary incisors were used to assess the degree of root resorption using a scoring system. In addition, treatment changes involving maxillary incisors were evaluated in lateral headfilms. Intergroup comparisons were performed with t, Mann-Whitney U, and chi-square tests (P <0.05). RESULTS: Overjet, overbite, inclination, vertical positional changes, and vertical and horizontal apical displacements of maxillary incisors were similar between groups. There was no statistically significant difference between groups regarding root resorption of maxillary incisors. Root resorption degree ranged from mild to moderate in both groups. CONCLUSIONS: Treating complete Class II malocclusion with 2 maxillary premolar extractions resulted in a similar root resorption as treating without maxillary premolar extractions. An individualized evaluation of root resorption predisposing factors should be performed for each patient.

Torqued and conventional cantilever for uprighting mesially impacted molars: A 3-dimensional finite element analysis.

INTRODUCTION: The objective of this study was to evaluate the effects of the torqued cantilever (TC) and conventional tip-back cantilever (CC) made of stainless steel (SS) and titanium-molybdenum alloy (TMA) on the uprighting of mesially impacted mandibular molars using three-dimensional finite element analysis. METHODS: The 3-dimensional mandibular model included part of the mandible with mesially tipped and impacted mandibular second molar, periodontal ligament (PDL), molar tube, mini-implant, and cantilevers. Four finite element method models (TC-SS, TC-TMA, CC-SS, and CC-TMA) were created to simulate different skeletally anchored uprighting mechanics. CC mechanics involved a known 0.019 × 0.025-in helical cantilever acting on a buccal molar tube. TC mechanics included a 0.019 × 0.025-in cantilever capable of producing mesial root torque by acting on a tube positioned on the molar disto-occlusal surface with the slot in a buccolingual direction. Three-dimensional molar displacement and stress distribution on the molar PDL were recorded. RESULTS: The SS cantilever produced almost twice as much molar displacement as the TMA. TC mechanics showed more evident mesial displacement of the molar root apexes. CC mechanics had greater molar rotation. TC uprighting moment produced greater molar mesial extrusion and greater intrusion of the distal root apex. The dual deflection system of the TC mechanics induced the lowest stress on the PDL, regardless of the metallic alloy. CONCLUSIONS: TC delivered a more efficient uprighting moment to the molar with less unwanted tooth movement and stress on the PDL and a more accessible site for bonding the molar tube.

Short-term efficacy of vacuum-formed maintainer for deciduous second molar space maintenance in the mixed dentition: A single-centre, randomized controlled clinical trial.

OBJECTIVE: To compare the efficacy of vacuum-formed and banded space maintainers for deciduous second molar space maintenance during the mixed dentition. SETTING AND SAMPLE POPULATION: The study sample comprised thirty children in the mixed dentition (age range, 5.9 to 9.8 years) with early loss of at least one deciduous second molar. METHODS: This was a parallel-group, randomized, active-controlled clinical trial. Patients were randomly allocated to space maintenance performed with vacuum-formed or banded space maintainers with a 1:1 allocation ratio. The main outcome was any change in mesiodistal width of the extraction space. Secondary outcomes included the lingual rolling or axial rotation of the permanent first molar adjacent to the extraction site and extrusion of the antagonist tooth. Dental casts were obtained before appliance installation (T0), after 3 months (T1) and after 6 months (T2). Digital dental casts were measured using Dolphin 3D software. Chi-square, t test or Mann-Whitney and ANOVA or Friedman test were used for intra- and intergroup comparisons (P < .05). RESULTS: Baseline characteristics were similar between groups except for chronological age. Statistically, but not clinically significant space loss (mean, 0.32 mm; SD, ± 0.39) occurred with the vacuum-formed space maintainer only at the first trimester (T0-T1). Lingual rolling and axial rotation of the first permanent molar were not significant, as well as extrusion of the antagonist tooth. CONCLUSIONS: The results of this study suggested that both tested devices were effective in maintaining space after early extraction of the deciduous second molar over a period of 6 months.

Effect of Class II camouflage treatment on anterior arch length ratio and canine relationship.

INTRODUCTION: To evaluate the influence of compensatory tipping of maxillary and mandibular incisors on the anterior arch length ratio and canine relationship in skeletal Class II malocclusion. METHODS: The study was based on posttreatment lateral head films and dental casts of 88 patients. The sample was divided into a Class II malocclusion group (32 patients; ANB ≥5° and mean [± standard deviation] age, 20.82 ± 7.67 years) and a Class I malocclusion group (56 patients; 1° ≤ ANB ≤ 2.5° and mean [± standard deviation] age, 19.20 ± 5.04 years). Measurements obtained for anterior arch length and width, Bolton discrepancy, canine relationship, growth pattern, and incisor position were compared between the groups. The canine relationship was correlated with dental and skeletal variables (P <0.05). RESULTS: The mean ANB angles were 6.21° and 1.78° for the Class II and Class I malocclusion groups, respectively. The skeletal Class II group presented significantly larger mandibular anterior arch length, producing an unbalanced anterior arch length ratio. The canine relationship was more displaced toward Class II in this group. Anterior arch length ratio was the most influential variable in the canine relationship. The mandibular incisors had a higher compensation degree than the maxillary incisors. The groups were similar regarding overjet, overbite, and growth pattern. CONCLUSIONS: Class II malocclusion camouflage treatment with excessive proclination of the mandibular incisors was associated with an increase in mandibular arch length, negatively influencing the anterior arch length ratio and the final canine relationship. Mandibular anterior arch length reduction by interproximal stripping may be necessary in moderate to severe skeletal Class II malocclusion orthodontic treatment.

Development of dentofacial characteristics related to Incontinentia Pigmenti syndrome: A repeated cross-sectional study.

INTRODUCTION: This research aimed to investigate the dentofacial characteristics of patients with Incontinentia Pigmenti (IP) (or Bloch-Sulzberger) syndrome in childhood, juvenile, and adulthood developmental stages. METHODS: Fifteen female patients with a clinical diagnosis of IP, genetically confirmed by molecular testing, were included in this study. The records of 25 nonsyndromic females with Class I occlusion and lateral cephalograms obtained at similar developmental stages were selected from the American Association of Orthodontists Foundation Legacy Collection as a control group. Dentofacial features of subjects with IP and those in the control group were compared statistically using t test and Mann-Whitney rank-sum test (significance was defined as P <0.05). RESULTS: In general, patients with IP had shorter maxillary and mandibular length, straight skeletal profile, hypodivergent growth pattern with a tendency to mandibular protrusion, shorter anterior facial height, Class III compensatory positioning of incisors, more retruded lips, and smaller maxillary incisor exposure. The degree of hypodontia severity had a significant impact on skeletal, dental, and soft-tissue features in patients with IP. CONCLUSIONS: The results of this study showed that, since childhood, the dentofacial characteristics of patients with IP were progressively distancing from those of nonsyndromic patients with Class I occlusion, presenting their own orthodontic needs.

Dissipating tooth-mass discrepancy caused by a set of mandibular incisor anomalies.

Dental anomalies are complicating factors of orthodontic treatment, especially when 1 or more anterior teeth are affected. In this case report, a girl, aged 12.5 years with a retrognathic chin; number, size, and position anomalies of the mandibular incisors; and bilateral Class I molar relationship sought orthodontic treatment. Tooth-size ratio discrepancy was dissipated without extraction or prosthetic rehabilitation, and the initial molar relationship was maintained, as well as the straight soft tissue profile. Tipping of maxillary and mandibular incisors, crown torque of canines, restoration of anomalous incisor, and maxillary interproximal enamel reduction were key points for successful treatment. After 18 months, the orthodontic records showed stable results, excellent static and functional occlusion, and good smile esthetics and facial appearance, in addition to a high degree of patient satisfaction with the achieved results.

X-ray beam angulation can compromise 2-dimensional diagnosis of interradicular space for mini-implants.

INTRODUCTION: The aim of this research was to evaluate the influence of x-ray projection geometry on interradicular space of the posterior maxillary arch. METHODS: Cone-beam computed tomography (CBCT) scans of 32 patients (16.85 ± 4.93 years) who met the selection criteria were enrolled. One hundred ninety-two interradicular sites of the posterior maxillary arch were evaluated. Before measurements, each side of the maxillary arch was orientated in all 3 planes of space to obtain CBCT synthesized periapical radiographs with 0° projection geometry (orthogonal x-ray beam-orthogonal X-ray angulation [OX]). Standardized CBCT axial rotations (10°, 20°, -10°, and -20°) were used to simulate periapical radiographs taken with mesial and distal angulation of the x-ray beam (mesial x-ray angulation [MX] and distal x-ray angulation [DX]). Interradicular space widths were measured on OX, MX, and DX CBCT synthesized periapical radiographs. Measurements were performed parallel to the occlusal plane at 3 mm and 6 mm apical to the midpoint of the alveolar crest. Interradicular distances were statistically compared (P <0.05). RESULTS: Interradicular distances measured on MX and DX CBCT synthesized periapical radiographs were significantly smaller than those measured on OX. Interradicular distance was significantly correlated with the horizontal angulation of the x-ray beam. X-ray projection angle was the most influential variable on interradicular distance. About 30% reduction in interradicular space was observed for every 10° of deviation from orthogonal x-ray. CONCLUSION: Two-dimensional radiographs obtained away from the 0° projection geometry can reduce the actual interradicular space for mini-implants, inducing misdiagnosis.

Expanding torque possibilities: A skeletally anchored torqued cantilever for uprighting "kissing molars".

Several uprighting mechanics and devices have been used for repositioning tipped molars. "Kissing molars" (KMs) are an uncommon tooth impaction involving 2 severely tipped mandibular molars with their occlusal surfaces positioned crown to crown, with the roots pointing in opposite directions. Orthodontic uprighting of KMs has not been a usual treatment protocol, and it can be a challenging task due to the severe tipping and double impaction, requiring efficient and well-controlled uprighting mechanics. An innovative skeletally anchored cantilever, which uses the torque principle for uprighting tipped molars, is suggested. This torqued cantilever is easy to manufacture, install, and activate; it is a well-known torque that is effective for producing root movement. A successful treatment of symptomatic KMs, involving the first and second molars, was achieved with this cantilever. Thus, clinicians should consider the suggested uprighting mechanics and orthodontic device as a more conservative alternative to extraction of KMs, depending on the patient's age, involved teeth in KMs, tipping severity, and impaction positions.

Short-term impact of rapid maxillary expansion on ectopically and normally erupting canines.

INTRODUCTION: The purpose of this study was to evaluate the short-term impact of rapid maxillary expansion (RME) on the eruption paths of ectopically and normally erupting maxillary canines in the mixed dentition. METHODS: Thirty-two patients with 49 ectopically erupting canines (EEC group; age, 9.53 ± 1.10 years) and 18 patients with 27 normally erupting canines (NEC group; age, 9.25 ± 1.06 years) underwent RME. Thirty-six subjects with 54 normally erupting canines composed the untreated control group (UC group; age, 9.03 ± 0.72 years). Horizontal, vertical, and angular positions of canines and adjacent teeth were evaluated in the expanded (EEC and NEC groups) and unexpanded (UC group) patients using panoramic radiographs taken at 2 times with a 1-year interval. The radiographic evaluation methods included score ranking and proportional measurements to minimize panoramic radiograph limitations. Statistical comparisons were performed among the groups (P <0.05). RESULTS: Before expansion, the EEC group's canines were significantly closer to the midline, more distant from the occlusal plane, and more mesially angulated than those in the UC group. After expansion, the canine positions in the EEC and UC groups were similar, whereas the NEC group had a more favorable canine position for eruption. The EEC and NEC groups showed similar canine positional changes, whereas the UC group had the smallest changes. The positions of teeth adjacent to the canine were also significantly affected by RME, and these changes may be associated with improvement of the ectopic canine position. CONCLUSIONS: The changes produced by RME reduced the percentage of ectopic eruption paths and maintained the nonectopic eruption percentage.

Root resorption of maxillary incisors retracted with and without skeletal anchorage.

INTRODUCTION: Our objective was to compare root resorption degree of the maxillary central incisors retracted with and without skeletal anchorage. METHODS: This nonrandomized historical control study included 37 patients requiring maximum anterior retraction and treated with extraction of 2 maxillary premolars. Group 1 consisted of 22 patients (11 male, 11 female) in whom anterior retraction was performed without skeletal anchorage, and group 2 included 15 patients (3 male, 12 female) treated with skeletally anchored anterior retraction. Periapical radiographs were used to evaluate root resorption degree by a scoring system. The groups were compared regarding the resorption score and resorption degree distribution with the Mann-Whitney U test, chi-square test, and Z test on proportions. RESULTS: There was no statistically significant intergroup difference regarding root resorption, but the number of patients with severe and extreme root resorption degrees was significantly greater in group 2. CONCLUSIONS: Although the root resorption degree of the skeletal anchorage group was not significantly different from the group without skeletal anchorage, the number of patients with severe to extreme resorption in the first group was significantly greater. Therefore, careful clinical monitoring of skeletally anchored anterior retraction is needed, especially when there are known root resorption predisposing factors.

Impact of dentofacial development on early mandibular incisor crowding.

INTRODUCTION: In this retrospective longitudinal study, we evaluated the influence of dentofacial development on mandibular incisor crowding from the early mixed dentition (T1) to the early permanent dentition (T2). METHODS: The sample was selected from 1212 longitudinally followed untreated subjects. Cephalometric radiographs and dental casts of 42 subjects (mean age, 8.66 years) with mandibular incisor crowding were evaluated at T1 and T2. Dentoskeletal variables were compared, and their influence on crowding changes was estimated. The sample was divided regarding incisor crowding severity (≤2 mm and >2 mm) and behavior (improvement and worsening), and the variables with a significant influence on the crowding changes were compared between the groups (P <0.05). RESULTS: Incisor crowding decreased from T1 to T2. The crowding changes were influenced by the amount of initial crowding, leeway space, incisor protrusion, and maxillary width increase. Crowding of 2 mm or less was not a good predictor for self-correction, with similar chances for improvement or worsening. CONCLUSIONS: Incisor crowding reduction can be expected from the early mixed to the early permanent dentition. The potential for crowding reduction was associated with greater initial incisor crowding, leeway space, incisor protrusion, and maxillary width increase. A crowding threshold of 2 mm was not a valid borderline condition to define the self-correction prognosis.

Efficiency of Class II subdivision malocclusion treatment with 3 and 4 premolar extractions.

INTRODUCTION: In this study, we compared the efficiency of Class II subdivision malocclusion treatment with symmetric and asymmetric extractions. METHODS: A sample of 71 patients with complete Class II subdivision malocclusion was selected: group 1 consisted of 40 patients treated with 4 premolar extractions with an initial mean age of 13.37 years, and group 2 had 31 patients treated with 3 premolar extractions (2 maxillary premolars and 1 mandibular premolar on the Class I side) with an initial mean age of 14.44 years. To compare the efficiency of each treatment protocol, the initial and final occlusal results were evaluated on dental casts with the Peer Assessment Rating occlusal index, and time spent in treatment was calculated from the clinical charts. The amounts of initial and final midline deviation and improvement of midline deviation correction were also evaluated. Efficiency was calculated as the rate between occlusal improvement by the treatment time. The groups were compared with t and Mann-Whitney tests. RESULTS: The results showed that group 2 had a significantly smaller final amount of midline deviation and a greater correction of midline deviation. CONCLUSIONS: Treatment efficiency of type 1 Class II subdivision malocclusions with 3 or 4 premolar extractions is similar. However, treatment with 3 premolar extractions provides a better occlusal success rate.

Factors influencing molar relationship behavior in the mixed dentition.

INTRODUCTION: Our objectives were to compare different patterns of molar relationship changes from the mixed dentition to the permanent dentition and to discriminate the contributing dentoskeletal factors. METHODS: In this retrospective cohort study, we used a sample selected from 1212 untreated subjects who were longitudinally followed from the mixed to the permanent dentition. Eighty subjects (mean age, 8.69 years) had their right and left dental arch sides divided into 6 groups, according to molar relationship behavior: distal step kept in Class II (group 1A) or changed to Class I (group 1B); flush terminal plane kept in Class II (group 2A) or changed to Class I (group 2B); and mesial step kept in Class I (group 3A) or changed to Class III (group 3B). The groups were statistically evaluated at P <0.05. RESULTS: Class I and Class II defined by mesial and distal steps were stable. The flush terminal plane groups had a similar probability of maintaining the Class II relationship or changing to Class I. Groups 2A and 2B had significantly different changes in molar relationship, maxillary width, and mandibular skeletal traits as a whole. Class II maxillomandibular discrepancy, maxillary narrowing, and sagittal mandibular deficiency were the disadvantageous factors for favorable molar relationship adjustment. CONCLUSIONS: Mesial and distal steps produced stable molar relationships from the mixed to the permanent dentition. There were 2 distinct dentoskeletal parameters of subjects with flush terminal planes regarding transverse maxillary and sagittal mandibular dimensions that should be diagnosed early to define the prognosis for molar relationship adjustment and orthodontic treatment need.

Clinical predictors of potentially impacted canines in low-risk patients: A retrospective study in mixed dentition.

Objective: To evaluate the null hypothesis that there is no difference in a set of clinical predictors of potentially impacted canines between low-risk patients with and without displaced canines. Methods: The normal canine position group consisted of 30 patients with 60 normally erupting canines ranked in sector I (age, 9.30 ± 0.94 years). The displaced canine group comprised 30 patients with 41 potentially impacted canines ranked in sectors II to IV (age, 9.46 ± 0.78 years). Maxillary lateral incisor crown angulation, inclination, rotation, width, height, and shape, as well as palatal depth, arch length, width, and perimeter composed a set of clinical predictors, which were evaluated on digital dental casts. Statistical analyses consisted of group comparisons and variable correlations (p < 0.05). Results: There was a significant association between sex and mesially displaced canines. Unilateral canine displacement was more prevalent than bilateral displacement. The crown of the maxillary lateral incisors was significantly angulated more mesially and rotated mesiolabially in low-risk patients with displaced canines, who also had a shallower palate and shorter anterior dental arch length. Lateral incisor crown angulation and rotation, as well as palatal depth and arch length, were significantly correlated with the canine displacement severity. Conclusions: The null hypothesis was rejected. Maxillary lateral incisor angulation inconsistent with the "ugly duckling" stage as well as a shallow palate and short arch length are clinical predictors that can significantly contribute to the early screening of ectopic canines in low-risk patients.

Selective use of hand and forearm muscles during bone screw insertion: a natural torque meter.

PURPOSE: To compare the maximum torque produced by different muscle groups and its influence on mini-implant insertion torque and fracture prevention. MATERIALS AND METHODS: Eighty-seven professionals were evaluated for the maximum torque produced on a screwdriver by a combined action between the thumb and index finger (maximum digital torque [MDT]) and by the forearm supination movement (maximum brachial torque [MBT]). Ninety mini-implants distributed among 9 different diameters were fractured to determine the fracture torque (FT). The fracture resistance index (FRI) was obtained from: FRI_MDT = FT/MDT and FRI_MBT = FT/MBT. Analysis of variance and t tests were used to compare the groups. RESULTS: The MDT was smaller than the MBT, and the 2 measurements were smaller in female subjects. The FT increased for each 0.1-mm increment in diameter. The FRI_MDT was greater than FRI_MBT for all diameters. An FRI_MDT greater than 1 was found when the diameter was greater than or equal to 1.5 mm. An FRI_MBT greater than 1 occurred with diameters equal to or greater than 1.7 mm for female subjects and 1.8 mm for male subjects. CONCLUSIONS: The digital torque was 42% smaller than the brachial torque, and it was mechanically safer and biologically more compatible, allowing the prevention of the fracture of mini-implants with a diameter 1.5 mm or thicker owing to an insertion torque limitation at 15 N-cm.

Reliability of an indirect bone-probing method for diagnosis of labial bone crest level of the mandibular anterior teeth.

OBJECTIVES: To evaluate the null hypothesis that there would be no difference between the labial bone crest level of the mandibular anterior teeth evaluated with an indirect bone-probing method (IBP) and cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Twenty-nine adult patients with a mean age of 32.15 ± 8.75 years were enrolled. An IBP based on indirect tactile perception was used to determine the labial bone crest level of the mandibular anterior teeth clinically. Bone crest perception degree, gingival thickness, and patient discomfort during IBP were also recorded. CBCT scans were used to evaluate the level and thickness of the labial bone crest. IBP and CBCT methods were compared statistically. The significance level was set at 5%. RESULTS: There was a significant difference between the labial bone crest level diagnosed by IBP and CBCT. However, the difference was not clinically significant. IBP and CBCT measurements were significantly and strongly correlated (R = 0.74). Thinner gingival tissue was associated with a higher perception of bone crest. Only two patients reported mild to moderate discomfort during IBP. CONCLUSIONS: IBP allowed the labial bone crest level to be determined with acceptable clinical accuracy, especially in patients with thinner gingival tissue.